Oxygen tracer diffusion in amorphous hafnia films for resistive memory.

The oxygen diffusion rate in hafnia (HfO2)-based resistive memory plays a pivotal role in enabling nonvolatile data retention. However, the information retention times obtained in HfO2 resistive memory devices are many times higher than the expected values obtained from oxygen diffusion measurements in HfO2 materials. In this study, we resolve this discrepancy by conducting oxygen isotope tracer diffusion measurements in amorphous hafnia (a-HfO2) thin films. Our results show that the oxygen tracer diffusion in amorphous HfO2 films is orders of magnitude lower than that of previous measurements on monoclinic hafnia (m-HfO2) pellets. Moreover, oxygen tracer diffusion is much lower in denser a-HfO2 films deposited by atomic layer deposition (ALD) than in less dense a-HfO2 films deposited by sputtering. The ALD films yield similar oxygen diffusion times as experimentally measured device retention times, reconciling this discrepancy between oxygen diffusion and retention time measurements. More broadly, our work shows how processing conditions can be used to control oxygen transport characteristics in amorphous materials without long-range crystal order.

Accelerated Structural Optimization for the Supported Metal System Based on Hybrid Approach Combining Bayesian Optimization with Local Search.

Numerous systematic methods have been developed to search for the global minimum of the potential energy surface, which corresponds to the optimal atomic structure. However, the majority of them still demand a substantial computing load due to the relaxation process that is embedded as an inner step inside the algorithm. Here, we propose a hybrid approach that combines Bayesian optimization (BO) and a local search that circumvents the relaxation step and efficiently finds the optimum structure, particularly in supported metal systems. The hybridization strategy combining the capabilities of BO's effective exploration and the local search's fast convergence expedites structural search. In addition, the formulation of physical constraints regarding the materials system and the feature of screening structure similarity enhance the computational efficiency of the proposed method. The proposed algorithm is demonstrated in two supported metal systems, showing the potential of the proposed method in the field of structural optimization.

Phase shift optimization of III/V-on-bulk-Si DFB LD for single-mode stability.

A III/V-on-Bulk-Si DFB laser with a long phase shift section optimized for single-mode stability is presented. The optimized phase shift allows stable single-mode operations up to 20 times a threshold current. This mode stability is achieved by a gain difference between fundamental and higher modes maximized by sub-wavelength-scale tuning of the phase shift section. In SMSR-based yield analyses, the long-phase-shifted DFB laser showed superior performance compared to the conventional λ/4-phase-shifted ones.

Controlling the Oxidation State of Pt Single Atoms for Maximizing Catalytic Activity.

Single-atom catalysts (SACs) have emerged as promising materials in heterogeneous catalysis. Previous studies reported controversial results about the relative level in activity for SACs and nanoparticles (NPs). These works have focused on the effect of metal atom arrangement, without considering the oxidation state of the SACs. Here, we immobilized Pt single atoms on defective ceria and controlled the oxidation state of Pt SACs, from highly oxidized (Pt0 : 16.6 at %) to highly metallic states (Pt0 : 83.8 at %). The Pt SACs with controlled oxidation states were then employed for oxidation of CO, CH4 , or NO, and their activities compared with those of Pt NPs. The highly oxidized Pt SACs presented poorer activities than Pt NPs, whereas metallic Pt SACs showed higher activities. The Pt SAC reduced at 300 °C showed the highest activity for all the oxidations. The Pt SACs with controlled oxidation states revealed a crucial missing link between activity and SACs.

Oxidative Methane Conversion to Ethane on Highly Oxidized Pd/CeO2 Catalysts Below 400 °C.

Methane upgrading into more valuable chemicals has received much attention. Herein, we report oxidative methane conversion to ethane using gaseous O2 at low temperatures (<400 °C) and atmospheric pressure in a continuous reactor. A highly oxidized Pd deposited on ceria could produce ethane with a productivity as high as 0.84 mmol gcat -1 h-1 . The Pd-O-Pd sites, not Pd-O-Ce, were the active sites for the selective ethane production at low temperatures. Density functional theory calculations confirmed that the Pd-O-Pd site is energetically more advantageous for C-C coupling, whereas Pd-O-Ce promotes CH4 dehydrogenation. The ceria helped Pd maintain a highly oxidic state despite reductive CH4 flow. This work can provide new insight for methane upgrading into C2 species.

Author Correction: Differences in the fecal microbiota of neonates born at home or in the hospital.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper.

Differences in the fecal microbiota of neonates born at home or in the hospital.

Research on the neonatal microbiome has been performed mostly on hospital-born infants, who often undergo multiple birth-related interventions. Both the hospital environment and interventions around the time of birth may affect the neonate microbiome. In this study, we determine the structure of the microbiota in feces from babies born in the hospital or at home, and from vaginal samples of their mothers. We included 35 vaginally-born, breast-fed neonates, 14 of whom delivered at home (4 in water), and 21 who delivered in the hospital. Feces from babies and mothers and maternal vaginal swab samples were collected at enrollment, the day of birth, followed by days 1, 2, 7, 14, 21, and 28. At the time of birth, the diversity of the vaginal microbiota of mothers delivering in the hospital was higher than in mothers delivering at home, and showed higher proportion of Lactobacillus. Among 20 infants not exposed to perinatal maternal antibiotics or water birth, fecal beta diversity differed significantly by birth site, with hospital-born infants having lower Bacteroides, Bifidobacterium, Streptococcus, and Lactobacillus, and higher Clostridium and Enterobacteriaceae family (LDA > 3.0), than babies born at home. At 1 month of age, feces from infants born in the hospital also induced greater pro-inflammatory gene expression (TLR4, IL-8, occludin and TGFß) in human colon epithelial HT-29 cells. The results of this work suggest that hospitalization (perinatal interventions or the hospital environment) may affect the microbiota of the vaginal source and the initial colonization during labor and birth, with effects that could persist in the intestinal microbiota of infants 1 month after birth. More research is needed to determine specific factors that alter bacterial transmission between mother and baby and the long-term health implications of these differences for the developing infant.

O-band DFB laser heterogeneously integrated on a bulk-silicon platform.

An O-band DFB laser heterogeneously integrated on bulk-silicon platform is presented. A high wall plug efficiency of over 8% up to 70°C is achieved due to efficient heat dissipation from III/V active region to silicon platform. The single-mode operation is maintained in a wide current range with side-mode suppression ratio over 45dB. This result completes the optical device library suite for the bulk-silicon platform used in most semiconductor products.

Effect of frozen-storage period on quality of American sirloin and mackerel (Scomber japonicus).

This study aimed to study the effect of frozen-storage period on the quality of sirloin and mackerel (Scomber japonicus). The samples were evaluated after being kept in frozen storage at -17.9 °C for different periods of time (1, 8, 15, 22, and 29 days). The frozen storage resulted in increase in ice crystal formation on the surface of both sirloin and mackerel. Frozen-storage period had an effect on the increase in the drip loss of both sirloin and mackerel with a positive correlation (p < 0.05) as well as on the decrease in the hardness of sirloin with a negative correlation (p < 0.05). During the frozen-storage period, the 2-thiobarbituric acid reactive substance level was increased in mackerel while the level in sirloin was maintained; both levels were within safe limits. Consequently, a 29-day freezing period is postulated to have little effect on the quality of sirloin and mackerel.

Germanium p-i-n avalanche photodetector fabricated by point defect healing process.

In this Letter, we report Ge p-i-n avalanche photodetectors (APD) with low dark current (sub 1 µA below V(R)=5 V), low operating voltage (avalanche breakdown voltage=8-13 V), and high multiplication gain (440-680) by exploiting a point defect healing method (between 600°C and 650°C) and optimizing the doping concentration of the intrinsic region (p-type ~10¹7 cm⁻³). In addition, Raman spectroscopy and electrochemical capacitance voltage analyses were performed to investigate the junction interfaces in more detail. This successful demonstration of Ge p-i-n APD with low dark current, low operating voltage, and high gain is promising for low-power and high-sensitivity Ge PD applications.