Monoolein-Based Wireless Capacitive Sensor for Probing Skin Hydration.

Capacitive humidity sensors typically consist of interdigitated electrodes coated with a dielectric layer sensitive to varying relative humidity levels. Previous studies have investigated different polymeric materials that exhibit changes in conductivity in response to water vapor to design capacitive humidity sensors. However, lipid films like monoolein have not yet been integrated with humidity sensors, nor has the potential use of capacitive sensors for skin hydration measurements been fully explored. This study explores the application of monoolein-coated wireless capacitive sensors for assessing relative humidity and skin hydration, utilizing the sensitive dielectric properties of the monoolein-water system. This sensitivity hinges on the water absorption and release from the surrounding environment. Tested across various humidity levels and temperatures, these novel double functional sensors feature interdigitated electrodes covered with monoolein and show promising potential for wireless detection of skin hydration. The water uptake and rheological behavior of monoolein in response to humidity were evaluated using a quartz crystal microbalance with dissipation monitoring. The findings from these experiments suggest that the capacitance of the system is primarily influenced by the amount of water in the monoolein system, with the lyotropic or physical state of monoolein playing a secondary role. A proof-of-principle demonstration compared the sensor's performance under varying conditions to that of other commercially available skin hydration meters, affirming its effectiveness, reliability, and commercial viability.

Effect of Protection Polymer Coatings on the Performance of an Amperometric Galactose Biosensor in Human Plasma.

Galactose monitoring in individuals allows the prevention of harsh health conditions related to hereditary metabolic diseases like galactosemia. Current methods of galactose detection need development to obtain cheaper, more reliable, and more specific sensors. Enzyme-containing amperometric sensors based on galactose oxidase activity are a promising approach, which can be enhanced by means of their inclusion in a redox polymer coating. This strategy simultaneously allows the immobilization of the biocatalyst to the electroactive surface and hosts the electron shuttling units. An additional deposition of capping polymers prevents external interferences like ascorbic or uric acid as well as biofouling when measuring in physiological fuels. This work studies the protection effect of poly(2-methacryloyloxyethyl phosphorylcholine-co-glycidyl methacrylate (MPC) and polyvinylimidazole-polysulfostyrene (P(VI-SS)) when incorporated in the biosensor design for the detection of galactose in human plasma.

Health and quality of life among women after participation in a CBPR-informed physical activity intervention: with a pandemic perspective.

The lack of culturally and contextually oriented interventions promoting physical activity (PA) has led to increased physical inactivity among women living in disadvantaged neighbourhoods in Sweden. In this study one such intervention informed by community-based participatory research (CBPR) has been evaluated among 34 women from a disadvantaged neighbourhood before and during COVID-19. Health-related quality of life (HRQOL), behavioural and biomedical outcomes were assessed directly prior and post-intervention, followed by evaluations at 6-months and 18-months follow-up during COVID-19. The results revealed that HRQOL, particularly psychological, social, and environmental health significantly increased post-intervention compared to prior to intervention but reversed back at 6-months follow-up. Perceived health satisfaction and environmental health increased at 18-months follow-up during COVID-19. Participation in PA improved post-intervention and at 6-months follow-up. Everyday activities and fruit and vegetable intake continued to increase through all timepoints. Systolic blood pressure significantly decreased post-intervention and 6-months follow-up; blood flow rate increased significantly at all timepoints. Overall, the findings underscores the potential effectiveness of CBPR approaches in promoting and sustaining healthy lifestyles, even during acute situations such as the COVID-19. It may even serve as a future model for promoting health and addressing health disparities in similar groups.

Electronic Tongue for Direct Assessment of SARS-CoV-2-Free and Infected Human Saliva-A Feasibility Study.

An electronic tongue is a powerful analytical instrument based on an array of non-selective chemical sensors with a partial specificity for data gathering and advanced pattern recognition methods for data analysis. Connecting electronic tongues with electrochemical techniques for data collection has led to various applications, mostly within sensing for food quality and environmental monitoring, but also in biomedical research for the analyses of different bioanalytes in human physiological fluids. In this paper, an electronic tongue consisting of six electrodes (viz., gold, platinum, palladium, titanium, iridium, and glassy carbon) was designed and tested in authentic (undiluted, unpretreated) human saliva samples from eight volunteers, collected before and during the COVID-19 pandemic. Investigations of 11 samples using differential pulse voltammetry and a principal component analysis allowed us to distinguish between SARS-CoV-2-free and infected authentic human saliva. This work, as a proof-of-principle demonstration, provides a new perspective for the use of electronic tongues in the field of enzyme-free electrochemical biosensing, highlighting their potential for future applications in non-invasive biomedical analyses.

Continuous ex vivo glucose sensing in human physiological fluids using an enzymatic sensor in a vein replica.

Managing blood glucose can affect important clinical outcomes during the intraoperative phase of surgery. However, currently available instruments for glucose monitoring during surgery are few and not optimized for the specific application. Here we report an attempt to exploit an enzymatic sensor in a vein replica that could continuously monitor glucose level in an authentic human bloodstream. First, detailed investigations of the superficial venous systems of volunteers were carried out using ocular and palpating examinations, as well as advanced ultrasound measurements. Second, a tubular glucose-sensitive biosensor mimicking a venous system was designed and tested. Almost ideal linear dependence of current output on glucose concentration in phosphate buffer saline was obtained in the range 2.2-22.0 mM, whereas the dependence in human plasma was less linear. Finally, the developed biosensor was investigated in whole blood under homeostatic conditions. A specific correlation was found between the current output and glucose concentration at the initial stage of the biodevice operation. However, with time, blood coagulation during measurements negatively affected the performance of the biodevice. When the experimental results were remodeled to predict the response without the influence of blood coagulation, the sensor output closely followed the blood glucose level.

Developing and evaluating non-invasive healthcare technologies for a group of female participants from a socioeconomically disadvantaged area.

When compared to the general population, socioeconomically disadvantaged communities frequently experience compromised health. Monitoring the divide is challenging since standardized biomedical tests are linguistically and culturally inappropriate. The aim of this study was to develop and test a unique mobile biomedical testbed based on non-invasive analysis, as well as to explore the relationships between the objective health measures and subjective health outcomes, as evaluated with the World Health Organization Quality of Life survey. The testbed was evaluated in a socioeconomically disadvantaged neighborhood in Malmö, which has been listed as one of the twelve most vulnerable districts in Sweden. The study revealed that compared to conventional protocols the less intrusive biomedical approach was highly appreciated by the participants. Surprisingly, the collected biomedical data illustrated that the apparent health of the participants from the ethnically diverse low-income neighborhood was comparable to the general Swedish population. Statistically significant correlations between perceived health and biomedical data were disclosed, even though the dependences found were complex, and recognition of the manifest complexity needs to be included in further research. Our results validate the potential of non-invasive technologies in combination with advanced statistical analysis, especially when combined with linguistically and culturally appropriate healthcare methodologies, allowing participants to appreciate the significance of the different parameters to evaluate and monitor aspects of health.

Wearable Electronic Tongue for Non-Invasive Assessment of Human Sweat.

Sweat is a promising biofluid in allowing for non-invasive sampling. Here, we investigate the use of a voltammetric electronic tongue, combining different metal electrodes, for the purpose of non-invasive sample assessment, specifically focusing on sweat. A wearable electronic tongue is presented by incorporating metal electrodes on a flexible circuit board and used to non-invasively monitor sweat on the body. The data obtained from the measurements were treated by multivariate data processing. Using principal component analysis to analyze the data collected by the wearable electronic tongue enabled differentiation of sweat samples of different chemical composition, and when combined with 1H-NMR sample differentiation could be attributed to changing analyte concentrations.

Autotolerant ceruloplasmin based biocathodes for implanted biological power sources.

High-performance autotolerant bioelectrodes should be ideally suited to design implantable bioelectronic devices. Because of its high redox potential and ability to reduce oxygen directly to water, human ceruloplasmin, HCp, the only blue multicopper oxidase present in human plasma, appears to be the ultimate biocatalyst for oxygen biosensors and also biocathodes in biological power sources. In comparison to fungal and plant blue multicopper oxidases, e.g. Myrothecium verrucaria bilirubin oxidase and Rhus vernicifera laccase, respectively, the inflammatory response to HCp in human blood is significantly reduced. Partial purification of HCp allowed to preserve the native conformation of the enzyme and its biocatalytic activity. Therefore, electrochemical studies were carried out with the partially purified enzyme immobilised on nanostructured graphite electrodes at physiological pH and temperature. Amperometric investigations revealed low reductive current densities, i.e. about 1.65 µA cm-2 in oxygenated electrolyte and in the absence of any mediator, demonstrating nevertheless direct electron transfer based O2 bioelectroreduction by HCp for the first time. The reductive current density obtained in the mediated system was about 12 µA cm-2. Even though the inflammatory response of HCp is diminished in human blood, inadequate bioelectrocatalytic performance hinders its use as a cathodic bioelement in a biofuel cell.

Octaheme nitrite reductase: The mechanism of intramolecular electron transfer and kinetics of nitrite bioelectroreduction.

Detailed impedance and voltammetric studies of hexameric octaheme nitrite reductase immobilized on carbon-based nanomaterials, specifically nanotubes and nanoparticles, were performed. Well-pronounced bioelectrocatalytic reduction of nitrite on enzyme-modified electrodes was obtained. Analysis of the impedance data indicated the absence of long-lived intermediates involved in the nitrite reduction. Cyclic voltammograms of biomodified electrodes had a bi-sigmoidal shape, which pointed to the presence of two enzyme orientations on carbon supports. The maximum (limiting) catalytic currents were determined and, by applying the correction by the mixed kinetics equation, the Tafel dependences were plotted for each catalytic wave/each enzyme orientation. Finally, two schemes for the rate-limiting processes during bioelectrocatalysis were proposed, viz. for low- and high-potential orientations.

Non-Invasive Electrochemical Biosensors Operating in Human Physiological Fluids.

Non-invasive healthcare technologies are an important part of research and development nowadays due to the low cost and convenience offered to both healthcare receivers and providers. This work overviews the recent advances in the field of non-invasive electrochemical biosensors operating in secreted human physiological fluids, viz. tears, sweat, saliva, and urine. Described electrochemical devices are based on different electrochemical techniques, viz. amperometry, coulometry, cyclic voltammetry, and impedance spectroscopy. Challenges that confront researchers in this exciting area and key requirements for biodevices are discussed. It is concluded that the field of non-invasive sensing of biomarkers in bodily fluid is highly convoluted. Nonetheless, if the drawbacks are appropriately addressed, and the pitfalls are adroitly circumvented, the approach will most certainly disrupt current clinical and self-monitoring practices.

Development and evaluation of a physical activity intervention informed by participatory research- a feasibility study.

BACKGROUND: Despite numerous interventions aiming to improve physical activity in socially disadvantaged populations, physical inactivity remains to be a rising challenge to public health globally, as well as, in Sweden. In an effort to address this challenge, a community-based participatory intervention was developed through active community engagement and implemented in a socially disadvantaged neighborhood in Sweden. The current study aims to present the development and initial evaluation of a participatory research driven physical activity intervention. METHODS: Fifteen participants (11 females and 4 males) aged 17-59 years volunteered to participate in the physical activity intervention program. The intervention program was evaluated using a longitudinal mixed methods design measuring health impact changes over time through focus group discussions and quality of life surveys. Further additional biomedical health parameters such as levels of glycosylated hemoglobin, blood pressure, levels of oxygen saturation and body mass index were monitored before and after the intervention. Focus group data were analyzed using content analysis with an inductive approach. The pre-and post-test scores from the survey-based quality of life domains, as well as the health parameters were compared using non-parametric and parametric statistics. RESULTS: Four themes emerged from the analysis of the focus group discussions including sense of fellowship, striving for inclusion and equity, changing the learner perspective and health beyond illness. The scores for the domains Physical Health, Psychological Health, Social Relationships and Health Satisfaction where significantly higher after participation in the physical activity intervention program compared to the pre-test scores (p < .05)s. There were however, no significant changes in the scores for the environmental domain and overall quality of life after intervention compared to that prior to intervention start. Overall, the biomedical health parameters remained stable within the normal ranges during intervention. CONCLUSION: The focus group discussions and results from the surveys and biomedical measures reveal important findings to understand and further develop the intervention program to promote health equity among citizens in disadvantaged areas. Evaluating the feasibility of such an intervention using multiple approaches contributes to effective implementation of it for larger communities in need.

Consecutive Marcus Electron and Proton Transfer in Heme Peroxidase Compound II-Catalysed Oxidation Revealed by Arrhenius Plots.

Electron and proton transfer reactions in enzymes are enigmatic and have attracted a great deal of theoretical, experimental, and practical attention. The oxidoreductases provide model systems for testing theoretical predictions, applying experimental techniques to gain insight into catalytic mechanisms, and creating industrially important bio(electro)conversion processes. Most previous and ongoing research on enzymatic electron transfer has exploited a theoretically and practically sound but limited approach that uses a series of structurally similar ("homologous") substrates, measures reaction rate constants and Gibbs free energies of reactions, and analyses trends predicted by electron transfer theory. This approach, proposed half a century ago, is based on a hitherto unproved hypothesis that pre-exponential factors of rate constants are similar for homologous substrates. Here, we propose a novel approach to investigating electron and proton transfer catalysed by oxidoreductases. We demonstrate the validity of this new approach for elucidating the kinetics of oxidation of "non-homologous" substrates catalysed by compound II of Coprinopsis cinerea and Armoracia rusticana peroxidases. This study - using the Marcus theory - demonstrates that reactions are not only limited by electron transfer, but a proton is transferred after the electron transfer event and thus both events control the reaction rate of peroxidase-catalysed oxidation of substrates.

Hybrid dual-functioning electrodes for combined ambient energy harvesting and charge storage: Towards self-powered systems.

In the last few years, there have been an increasing number of reports where different energy harvesters are directly combined with charge storing devices, based on dual-function electrodes able to convert and store electrical energy in the same volume. This includes (bio)fuel cells harvesting chemical energy, (bio)solar cells harvesting solar energy, tribo- and piezoelectric devices harvesting mechanical energy, and thermoelectrics harvesting thermal energy, which now have been intimately combined with batteries and electrochemical capacitors. These new types of hybrid electric devices show great promise especially for the design of self-powered electronics where an integrated hybrid power system is preferable to separated ones, capable of scavenging ambient energy and simultaneously store it and in this way increasing the efficiency and enabling further miniaturization. This paper details the recent emergence of hybrid energy systems, reviewing the progress made using widely different energy harvesting techniques, which have so-far not been described in a single body of work.

Challenges for successful implantation of biofuel cells.

There is a growing interest in the design and engineering of operational biofuel cells that can be implanted. This review highlights the recent progress in the electrochemistry of biofuel cell technologies, but with a particular emphasis on the medical and physiological aspects that impact the biocompatibility of biofuel cells operating inside a living body. We discuss the challenge of supplying power to implantable medical devices, with regard to the limitations of lithium battery technology and why implantable biofuel cells can be a promising alternative to provide the levels of power required for medical devices. In addition to the challenge of designing a biofuel cell that provides a stable level of sufficient power, the review highlights the biocompatibility and biofouling problems of implanting a biofuel cell that have a major impact on the availability of the substrates inside body that provide fuel for the biofuel cell. These physiological challenges and associated ethical considerations are essential to consider for biofuel cells that are designed to be implanted for long-term operation inside a living animal and eventually to human clinical applications.

Rechargeable, flexible and mediator-free biosupercapacitor based on transparent ITO nanoparticle modified electrodes acting in µM glucose containing buffers.

We present a transparent and flexible self-charging biosupercapacitor based on an optimised mediator- and membrane-free enzymatic glucose/oxygen biofuel cell. Indium tin oxide (ITO) nanoparticles were spray-coated on transparent conducting ITO supports resulting in a flocculent, porous and nanostructured electrode surface. By this, high capacitive currents caused by an increased electrochemical double layer as well as enhanced catalytic currents due to a higher number of immobilised enzyme molecules were obtained. After a chemical pre-treatment with a silane derivative, bilirubin oxidase from Myrothecium verrucaria was immobilized onto the ITO nanostructured electrode surface under formation of a biocathode, while bioanodes were obtained by either immobilisation of cellobiose dehydrogenase from Corynascus thermophilus or soluble PQQ-dependent glucose dehydrogenase from Acinetobacter calcoaceticus. The latter showed a lower apparent KM value for glucose conversion and higher catalytic currents at µM glucose concentrations. Applying the optimised device as a biosupercapacitor in a discontinuous charge/discharge mode led to a generated power output of 0.030mW/cm2 at 50µM glucose, simulating the glucose concentration in human tears. This represents an enhancement by a factor of 350 compared to the power density obtained from the continuously operating biofuel cell with a maximum power output of 0.086µW/cm2 under the same conditions. After 17h of charging/discharging cycles a remarkable current enhancement was still measured. The entire device was transferred to flexible materials and applied for powering a flexible display showing its potential applicability as an intermittent power source in smart contact lenses.

Evolving stability and pH-dependent activity of the high redox potential Botrytis aclada laccase for enzymatic fuel cells.

Fungal high redox potential laccases are proposed as cathodic biocatalysts in implantable enzymatic fuel cells to generate high cell voltages. Their application is limited mainly through their acidic pH optimum and chloride inhibition. This work investigates evolutionary and engineering strategies to increase the pH optimum of a chloride-tolerant, high redox potential laccase from the ascomycete Botrytis aclada. The laccase was subjected to two rounds of directed evolution and the clones screened for increased stability and activity at pH 6.5. Beneficial mutation sites were investigated by semi-rational and combinatorial mutagenesis. Fourteen variants were characterised in detail to evaluate changes of the kinetic constants. Mutations increasing thermostability were distributed over the entire structure. Among them, T383I showed a 2.6-fold increased half-life by preventing the loss of the T2 copper through unfolding of a loop. Mutations affecting the pH-dependence cluster around the T1 copper and categorise in three types of altered pH profiles: pH-type I changes the monotonic decreasing pH profile into a bell-shaped profile, pH-type II describes increased specific activity below pH 6.5, and pH-type III increased specific activity above pH 6.5. Specific activities of the best variants were up to 5-fold higher (13 U mg-1) than BaL WT at pH 7.5.

Halides inhibition of multicopper oxidases studied by FTIR spectroelectrochemistry using azide as an active infrared probe.

An infrared spectroelectrochemical study of Trametes hirsuta laccase and Magnaporthe oryzae bilirubin oxidase has been performed using azide, an inhibitor of multicopper oxidases, as an active infrared probe incorporated into the T2/T3 copper cluster of the enzymes. The redox potential-controlled measurements indicate that N3- stretching IR bands of azide ion bound to the T2/T3 cluster are only detected for the oxidized enzymes, confirming that azide only binds to Cu2+. Moreover, the process of binding/dissociation of azide ion is shown to be reversible. The interaction of halide anions, which also inhibit multicopper oxidases, with the active site of the enzymes was studied by measuring the changes in the azide FTIR bands. Enzymes inhibited by azide respond differently upon addition of fluoride or chloride ions to the sample solution inhibited by azide. Fluoride ions compete with azide for binding at one of the T2/T3 Cu ions, whereas competition from chloride ions is much less evident.

Transparent, mediator- and membrane-free enzymatic fuel cell based on nanostructured chemically modified indium tin oxide electrodes.

We detail a mediator- and membrane-free enzymatic glucose/oxygen biofuel cell based on transparent and nanostructured conducting supports. Chemically modified indium tin oxide nanoparticle modified electrodes were used to substantially increase the active surface area without significantly compromising transparency. Two different procedures for surface nanostructuring were employed, viz. spray-coating and drop-coating. The spray-coated biodevice showed superior characteristics as compared to the drop-coated enzymatic fuel cell, as a result of the higher nanostructured surface area as confirmed by electrochemical characterisation, as well as scanning electron and atomic force microscopy. Subsequent chemical modification with silanes, followed by the immobilisation of either cellobiose dehydrogenase from Corynascus thermophiles or bilirubin oxidase from Myrothecium verrucaria, were performed to obtain the bioanodes and biocathodes, respectively. The optimised biodevice exhibited an OCV of 0.67V and power output of up to 1.4µW/cm2 at an operating voltage of 0.35V. This is considered a significant step forward in the field of glucose/oxygen membrane- and mediator-free, transparent enzymatic fuel cells.

Quo Vadis, Implanted Fuel Cell?

The road to safe and effective implantable electrical power devices has been long-and the goal has not been reached yet, although a certain amount of scientific and technological progress has been made. This brief review is focused on highlighting the stages of development of implanted fuel cells capable of providing electrical power for running implanted "personal electronics". The paper starts with early efforts to implant glucose-burning fuel cells in dogs, and ends with realistic attempts at interfacing a more sophisticated enzymatic glucose/oxygen fuel cell in an actual human blood stream. However, before that, the review deals with thermodynamic aspects of fuel cells, emphasizing the general advantages of these devices. Further steps, which are needed to realize the potential of this technology and which somehow differ from generally accepted ideas, are presented. These next steps are evaluated in the context of theoretically achievable abilities of implantable chemical power sources, which are not as great as many researchers might expect.

An Intrinsic Self-Charging Biosupercapacitor Comprised of a High-Potential Bioanode and a Low-Potential Biocathode.

An intrinsic self-charging biosupercapacitor built on a unique concept for the fabrication of biodevices based on redox polymers is presented. The biosupercapacitor consists of a high-potential redox polymer based bioanode and a low-potential redox polymer based biocathode in which the potentials of the electrodes in the discharged state show an apparent potential mismatch Eanode >Ecathode and prevent the use of the device as a conventional biofuel cell. Upon charging, the potentials of the electrodes are shifted to more positive (cathode) and more negative (anode) values because of a change in the aox -to-ared ratio within the redox polymer matrix. Hence, a potential inversion occurs in the charged state (Eanode 0.4 V is achieved and the biodevice acts as a true biosupercapacitor. The bioanode consists of a novel specifically designed high-potential Os complex modified polymer for the efficient immobilization and electrical wiring of glucose converting enzymes, such as glucose oxidase and flavin adenine dinucleotide (FAD)-dependent glucose dehydrogenase. The cathodic side is constructed from a low-potential Os complex modified polymer integrating the O2 reducing enzyme, bilirubin oxidase. The large potential differences between the redox polymers and the prosthetic groups of the biocatalysts ensure fast and efficient charging of the biodevice.