RESUMEN
Effective sweat management fabric for sportswear facilitates sweat removal from the skin and elevates the comfort for human. However, when the body is in a strong hot and humid environment or after strenuous exercise, the sweat management fabric will be totally wetted and saturated quickly. As a result, excess sweat cannot be absorbed effectively by the garment, which creates obvious stickiness and heaviness. In this paper, a directional water transport and collection multilayered knitted fabric (DWTCF) is prepared by plasma pretreatment technology and screen coating. The treelike water transport network inspired from nature is designed in order to drive the liquid flow along the channels. By surface modification, branched hydrophilic flow paths are fabricated, and other regions are hydrophobic. As a demonstration, DWTCF has been injected with water to observe the liquid transport behavior. During the experiment, 76.7% liquid is collected by DWTCF, but there is just 0.06% collected by an ordinary knitted fabric. The weight increase of the ordinary fabric is 555.4% larger than that of DWTCF. Specifically, DWTCF utilizes the wetting and pressure-gradient-induced interfacial tension as well as the gravitational effect to facilitate the fluid motion along the hydrophilic channel, in addition to the capillarity present in the fabric structure. This study provides a new idea to develop directional water transport and collection fabric to solve the moisture absorption saturation problem of the fabric, especially for conditions requiring intense sweating.
Asunto(s)
Interacciones Hidrofóbicas e Hidrofílicas , Sudor , Textiles , Agua , Agua/química , Humanos , Sudor/química , Sudor/metabolismo , Humectabilidad , Dispositivos Electrónicos Vestibles , Sudoración , Materiales Biomiméticos/químicaRESUMEN
Capillary flow has garnered significant attention due to its unique dynamic characteristics that require no external force. Creating a quantitative analytical model to evaluate capillary flow behaviors in root-like networks is essential for enhancing fluid control properties in functional textiles. In this study, we explore the capillary dynamics within root-like networks under the influence of gravity and derive the most rapid capillary flow via structural optimization. The flow time in a capillary is dominated by the capillary pressure, viscous pressure loss, and gravity, each of which exhibits diverse sensitivities to the structures of root-like networks. We scrutinize various structural parameters to understand their impact on capillary flow in root-like networks. Subsequently, optimal structural parameters (namely, the mother tube diameter and diameter ratio) are identified to minimize capillary flow time. Moreover, we discovered that the correlation between flow time and distance for capillary flow in root-like networks does not obey the classical Lucas-Washburn equation. These results affirm that root-like networks can enhance capillary flow, providing critical insights for numerous capillary-flow-dependent engineering applications.
RESUMEN
Maintaining thermal comfort within the human body is crucial for optimal health and overall well-being. By merely broadening the set-point of indoor temperatures, we could significantly slash energy usage in building heating, ventilation, and air-conditioning systems. In recent years, there has been a surge in advancements in personal thermal management (PTM), aiming to regulate heat and moisture transfer within our immediate surroundings, clothing, and skin. The advent of PTM is driven by the rapid development in nano/micro-materials and energy science and engineering. An emerging research area in PTM is personal radiative thermal management (PRTM), which demonstrates immense potential with its high radiative heat transfer efficiency and ease of regulation. However, it is less taken into account in traditional textiles, and there currently lies a gap in our knowledge and understanding of PRTM. In this review, we aim to present a thorough analysis of advanced textile materials and technologies for PRTM. Specifically, we will introduce and discuss the underlying radiation heat transfer mechanisms, fabrication methods of textiles, and various indoor/outdoor applications in light of their different regulation functionalities, including radiative cooling, radiative heating, and dual-mode thermoregulation. Furthermore, we will shine a light on the current hurdles, propose potential strategies, and delve into future technology trends for PRTM with an emphasis on functionalities and applications.
RESUMEN
Thermal protective textiles are crucial for safeguarding individuals, particularly firefighters and steelworkers, against extreme heat, and for preventing burn injuries. However, traditional firefighting gear suffers from statically fixed thermal insulation properties, potentially resulting in overheating and discomfort in moderate conditions, and insufficient protection in extreme fire events. Herein, an innovative soft robotic textile is developed for dynamically adaptive thermal management, providing superior personal protection and thermal comfort across a spectrum of environmental temperatures. This unique textile features a thermoplastic polyurethane (TPU)-sealed actuation system, embedded with a low boiling point fluid for reversible phase transition, resembling an endoskeleton that triggers an expansion within the textile matrix for enhanced air gap and thermal insulation. The thermal resistance improves automatically from 0.23 to 0.48 Km2 W-1 by self-actuating under intense heat, exceeding conventional textiles by maintaining over 10 °C cooler temperatures. Additionally, the knitted substrate incorporated into the soft actuators can substantially mitigate convective heat transfer, as evidenced by the thermal resistance tests and the temperature mapping derived from numerical simulations. Moreover, it boasts significantly increased moisture permeability. The thermoadaptation and breathability of this durable all-fabric system signify considerable progress in the development of protective clothing with high comfort for dynamic and extreme temperature conditions.
RESUMEN
Since hemostats are likely to be flushed off a wound by a massive gushing of blood, achieving rapid and effective hemostasis in complex bleeding wounds with powder hemostats continues to be a significant therapeutic challenge. In order to counter the flushing effect of gushing blood, a gas-jet propelled powder hemostat ((COL/PS)4@CaCO3-T-TXA+) has been developed. (COL/PS)4@CaCO3-T-TXA+ dives into the deep bleeding sites of complex wounds for targeted hemostasis. In preparation, protamine sulfate and collagen are first electrostatically deposited on CaCO3, which is then loaded with thrombin, and finally doped with protonated tranexamic acid (TXA-NH3+) to produce the final therapeutic medicine (COL/PS)4@CaCO3-T-TXA+. When applied to bleeding tissues, CaCO3 and TXA-NH3+ from (COL/PS)4@CaCO3-T-TXA+ immediately react with each other in blood to release countless CO2 macro-bubbles, which direct the hemostatic powder, (COL/PS)4@CaCO3-T-TXA+, precisely towards deep bleeding sites from complex wounds. Then the carried thrombin is released to accomplish targeted hemostasis. According to animal studies, (COL/PS)4@CaCO3-T-TXA+ has better effects in rabbit hepatic hemorrhage models; the hemorrhage quickly stops within 30 s, which is roughly 20% less than with the commercial product CeloxTM. The present study provides a new strategy for using powder hemostats to quickly and effectively stop bleeding in complex bleeding wounds.
Asunto(s)
Trombina , Ácido Tranexámico , Animales , Conejos , Polvos/farmacología , Hemostasis , Hemorragia/tratamiento farmacológico , Ácido Tranexámico/farmacología , Ácido Tranexámico/uso terapéuticoRESUMEN
Achieving rapid hemostasis in complex and deep wounds with secluded hemorrhagic sites is still a challenge because of the difficulty in delivering hemostats to these sites. In this study, a Janus particle, SEC-Fe@CaT with dual-driven forces, bubble-driving, and magnetic field- (MF-) mediated driving, was prepared via in situ loading of Fe3O4 on a sunflower sporopollenin exine capsule (SEC), and followed by growth of flower-shaped CaCO3 clusters. The bubble-driving forces enabled SEC-Fe@CaT to self-diffuse in the blood to eliminate agglomeration, and the MF-mediated driving force facilitated the SEC-Fe@CaT countercurrent against blood to access deep bleeding sites in the wounds. During the movement in blood flow, the meteor hammer-like SEC from SEC-Fe@CaT can puncture red blood cells (RBCs) to release procoagulants, thus promoting activation of platelet and rapid hemostasis. Animal tests suggested that SEC-Fe@CaT stopped bleeding in as short as 30 and 45 s in femoral artery and liver hemorrhage models, respectively. In contrast, the similar commercial product Celox™ required approximately 70 s to stop the bleeding in both bleeding modes. This study demonstrates a new hemostat platform for rapid hemostasis in deep and complex wounds. It was the first attempt integrating geometric structure of sunflower pollen with dual-driven movement in hemostasis.
RESUMEN
The ever-increasing development of flexible and wearable electronics has imposed unprecedented demand on flexible batteries of high energy density and excellent mechanical stability. Rechargeable lithium (Li) metal battery shows great advantages in terms of its high theoretical energy density. However, the use of Li metal anode for flexible batteries faces huge challenges in terms of its undesirable dendrite growth, poor mechanical flexibility, and slow fabrication speed. Here, a highly scalable Li-wicking strategy is reported that allows ultrafast fabrication of mechanically flexible and electrochemically stable Li metal anodes. Through the rational design of the interface and structure of the wicking host, the mean speed of Li-wicking reaches 10 m2 min-1 , which is 1000 to 100 000 fold faster than the reported electrochemical deposition or thermal infusion methods and meets the industrial fabrication speed. Importantly, the Li-wicking process results in a unique 3D Li metal structure, which not only offers remarkable flexibility but also suppresses the dendrite formation. Paring the Li metal anode with lithium-iron phosphate or sulfur cathode yields flexible full cells that possess a high charging rate (8.0 mA cm-2 ), high energy density (300-380 Wh kg-1 ), long cycling stability (over 550 cycles), and excellent mechanical robustness (500 bending cycles).
Asunto(s)
Electrónica , Litio , Acción Capilar , ElectrodosRESUMEN
A mask that creates a physical barrier to protect the wearer from breathing in airborne bacteria or viruses, reducing the risk of infection in polluted air and potentially contaminated environments, has become a daily necessity for the public especially as COVID-19 has exploded around the world. However, the use of masks often causes soaring temperatures and thick humid air, leading to thermal and wear discomfort and breathing difficulties for a number of people, and further increasing the elevated risk of heat illnesses including heat stroke and heat exhaustion. When wearers become highly active or work under high tension, the excess sweat generated negatively affects the functionality of masks. Here, we report on an innovative design of an air-conditioned mask (AC Mask) system, facilitating thermoregulation in the mask microclimate, ease of breathing, and wear comfort. The AC Mask system is developed by integrating a cost-effective and lightweight thermoelectric (TE) and ventilation unit in a wearable 3D printed mask device, compatible with existing disposable masks, to protect end users safely against toxic particles such as viruses. A wind-guided tunnel has been developed for quick and efficient ventilation of cooling air. Based on a human trial, reductions in the apparent microclimate temperature and the humidity by 3.5 °C and 50%, respectively, have been achieved under a low voltage. With the excellent thermal management properties, the AC Mask will find also wide application among professional end-users such as construction workers, firefighters, and medical personnel.
RESUMEN
The speed of capillary flow is a key bottleneck in improving the performance of nanofluidic and microfluidic devices for various applications including microfluidic diagnostics, thermal management heat pipes, micromolding devices, functional fabrics, and oil-water separators. Here, we present a novel nanofibrous or microfibrous hollow-wedged channel (named as W-Channel), which can significantly speed up the capillary flow. The capillary flow in the initial 100 s in the nanofibrous W-Channel was shown to be 8 times faster than that in the single-layer strip of the same material when placed vertically and over 20 times faster when placed horizontally. The enhanced flow under gravity is attributed to the adaptive interplay of capillary pressure and flow resistance within the triangular hollow wedge between the fibrous layers. The W-Channel can be fabricated following a simple procedure using inexpensive materials such as electrospun nanofibers or microfibrous filter papers.
Asunto(s)
Microfluídica/métodos , Nanofibras/químicaRESUMEN
Cell encapsulation has been shown to hold promise for effective, long-term treatment of type 1 diabetes (T1D). However, challenges remain for its clinical applications. For example, there is an unmet need for an encapsulation system that is capable of delivering sufficient cell mass while still allowing convenient retrieval or replacement. Here, we report a simple cell encapsulation design that is readily scalable and conveniently retrievable. The key to this design was to engineer a highly wettable, Ca2+-releasing nanoporous polymer thread that promoted uniform in situ cross-linking and strong adhesion of a thin layer of alginate hydrogel around the thread. The device provided immunoprotection of rat islets in immunocompetent C57BL/6 mice in a short-term (1-mo) study, similar to neat alginate fibers. However, the mechanical property of the device, critical for handling and retrieval, was much more robust than the neat alginate fibers due to the reinforcement of the central thread. It also had facile mass transfer due to the short diffusion distance. We demonstrated the therapeutic potential of the device through the correction of chemically induced diabetes in C57BL/6 mice using rat islets for 3 mo as well as in immunodeficient SCID-Beige mice using human islets for 4 mo. We further showed, as a proof of concept, the scalability and retrievability in dogs. After 1 mo of implantation in dogs, the device could be rapidly retrieved through a minimally invasive laparoscopic procedure. This encapsulation device may contribute to a cellular therapy for T1D because of its retrievability and scale-up potential.
Asunto(s)
Tratamiento Basado en Trasplante de Células y Tejidos , Trasplante de Islotes Pancreáticos/métodos , Islotes Pancreáticos/fisiología , Alginatos , Animales , Diabetes Mellitus Experimental/terapia , Dimetilformamida , Perros , Ácido Glucurónico , Ácidos Hexurónicos , Humanos , Hidrogeles , Ratones , Ratones SCID , Polimetil Metacrilato , RatasRESUMEN
A general quantitative model of capillary flow in homogeneous porous media with varying cross-sectional sizes is presented. We optimize the porous structure for the minimization of the penetration time under global constraints. Programmable capillary flows with constant volumetric flow rate and linear evolution of flow distance to time are also obtained. The controlled innovative flow behaviors are derived based on a dynamic competition between capillary force and viscous resistance. A comparison of dynamic transport on the basis of the present design with Washburn's equation is presented. The regulation and maximization of flow velocity in porous materials is significant for a variety of applications including biomedical diagnostics, oil recovery, microfluidic transport, and water management of fabrics.
Asunto(s)
Hidrodinámica , Modelos Teóricos , Cinética , Microfluídica , Aceites , Porosidad , AguaRESUMEN
Transport in treelike networks has received wide attention in natural systems, oil recovery, microelectronic cooling systems, and textiles. Existing studies are focused on transport behaviors under a constant potential difference (including pressure, temperature, and voltage) in a steady state [B. Yu and B. Li, Phys. Rev. E 73, 066302 (2006); J. Chen, B. Yu, P. Xu, and Y. Li, Phys. Rev. E 75, 056301 (2007)]. However, dynamic (time-dependent) transport in such systems has rarely been concerned. In this work, we theoretically investigate the dynamics of capillary flow in treelike networks and design the distribution of radius and length of local branches for the fastest capillary flow. It is demonstrated that capillary flow in the optimized tree networks is faster than in traditional parallel tube nets under fixed constraints. As well, the flow time of the liquid is found to increase approximately linearly with penetration distance, which differs from Washburn's classic description that flow time increases as the square of penetration distance in a uniform tube.
Asunto(s)
Velocidad del Flujo Sanguíneo/fisiología , Capilares/fisiología , Microvasos/fisiopatología , Modelos Cardiovasculares , Reología/métodos , Animales , Simulación por Computador , HumanosRESUMEN
When capillary flow occurs in a uniform porous medium, the depth of penetration is known to increase as the square root of time. However, we demonstrate in this study that the depth of penetration in multi-section porous layers with variation in width and height against the flow time is modified from this diffusive-like response, and liquids can pass through porous systems more readily in one direction than the other. We show here in a model and an experiment that the flow time for a negative gradient of cross-sectional widths is smaller than that for a positive gradient at the given total height of porous layers. The effect of width and height of local layers on capillary flow is quantitatively analyzed, and optimal parameters are obtained to facilitate the fastest flow.
Asunto(s)
Modelos Teóricos , PorosidadRESUMEN
Porous materials engineered for rapid liquid absorption are useful in many applications, including oil recovery, spacecraft life-support systems, moisture management fabrics, medical wound dressings, and microfluidic devices. Dynamic absorption in capillary tubes and porous media is driven by the capillary pressure, which is inversely proportional to the pore size. On the other hand, the permeability of porous materials scales with the square of the pore size. The dynamic competition between these two superimposed mechanisms for liquid absorption through a heterogeneous porous structure may lead to an overall minimum absorption time. In this work, we explore liquid absorption in two different heterogeneous porous structures [three-dimensional (3D) circular tubes and porous layers], which are composed of two sections with variations in radius/porosity and height. The absorption time to fill the voids of porous constructs is expressed as a function of radius/porosity and height of local sections, and the absorption process does not follow the classic Washburn's law. Under given height and void volume, these two-section structures with a negative gradient of radius/porosity against the absorption direction are shown to have faster absorption rates than control samples with uniform radius/porosity. In particular, optimal structural parameters, including radius/porosity and height, are found that account for the minimum absorption time. The liquid absorption in the optimized porous structure is up to 38% faster than in a control sample. The results obtained can be used a priori for the design of porous structures with excellent liquid management property in various fields.