Many long-lasting insecticidal bed nets for protection against disease vectors consist of poly(ethylene) fibers in which insecticide is incorporated during manufacture. Insecticide molecules diffuse from within the supersaturated polymers to surfaces where they become bioavailable to insects and often crystallize, a process known as blooming. Recent studies revealed that contact insecticides can be highly polymorphic. Moreover, insecticidal activity is polymorph-dependent, with forms having a higher crystal free energy yielding faster insect knockdown and mortality. Consequently, the crystallographic characterization of insecticide crystals that form on fibers is critical to understanding net function and improving net performance. Structural characterization of insecticide crystals on bed net fiber surfaces, let alone their polymorphs, has been elusive owing to the minute size of the crystals, however. Using the highly polymorphous compound ROY (5-methyl-2-[(2-nitrophenyl)-amino]thiophene-3-carbonitrile) as a proxy for insecticide crystallization, we investigated blooming and crystal formation on the surface of extruded poly(ethylene) fibers containing ROY. The blooming rates, tracked from the time of extrusion, were determined by UV-vis spectroscopy after successive washes. Six crystalline polymorphs (of the 13 known) were observed on poly(ethylene) fiber surfaces, and they were identified and characterized by Raman microscopy, scanning electron microscopy, and 3D electron diffraction. These observations reveal that the crystallization and phase behavior of polymorphs forming on poly(ethylene) fibers is complex and dynamic. The characterization of blooming and microcrystals underscores the importance of bed net crystallography for the optimization of bed net performance.
Four crystalline polymorphs of the proinsecticide chlorfenapyr [4-bromo-2-(4-chlorophenyl)-1-ethoxymethyl-5-trifluoromethyl-1H-pyrrole-3-carbonitrile] have been identified and characterized by polarized light optical microscopy, differential scanning calorimetry, Raman spectroscopy, X-ray diffraction, and electron diffraction. Three of the four structures were considered polytypic. Chlorfenapyr polymorphs show similar lethality against fruit flies (Drosophila melanogaster) and mosquitoes (Anopheles quadrimaculatus) with the least stable polymorph showing slightly higher lethality. Similar activities may be expected to be consistent with structural similarities. Knockdown kinetics, however, depend on an internal metabolic activating step, which further complicates polymorph-dependent bioavailability.
The performance of crystalline organic semiconductors depends on the solid-state structure, especially the orientation of the conjugated components with respect to device platforms. Often, crystals can be engineered by modifying chromophore substituents through synthesis. Meanwhile, dissymetry is necessary for high-tech applications like chiral sensing, optical telecommunications, and data storage. The synthesis of dissymmetric molecules is a labor-intensive exercise that might be undermined because common processing methods offer little control over orientation. Crystal twisting has emerged as a generalizable method for processing organic semiconductors and offers unique advantages, such as patterning of physical and chemical properties and chirality that arises from mesoscale twisting. The precession of crystal orientations can enrich performance because achiral molecules in achiral space groups suddenly become candidates for the aforementioned technologies that require dissymetry.
Helicoidal crystallites in rhythmically banded spherulites manifest spectacular optical patterns in small molecules and polymers. It is shown that concentric optical bands indicating crystallographic orientations typically lose coherence (in-phase twisting) with growth from the center of nucleation. Here, coherence is shown to increase as the twist period decreases for seven molecular crystals grown from the melt. This dependence was correlated to crystallite fiber thickness and length, as well as crystallite branching frequency, a parameter that was extracted from scanning electron micrographs, and supported by numerical simulations. Hole mobilities for 2,5-didodecyl-3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione (DPP-C12) measured by using organic field-effect transistors demonstrated that more incoherent boundaries between optical bands in spherulites lead to higher charge transport for films with the same twist period. This was rationalized by combining our growth model with electrodynamic simulations. This work illustrates the emergence of complexity in crystallization processes (spherulite formation) that arises in the extra variable of helicoidal radial twisting. The details of the patterns analyzed here link the added complexity in crystal growth to the electronic and optical properties of the thin films.
Tetrathiafulvalene (TTF) crystals grown from the melt are organized as spherulites in which helicoidal fibrils growing radially from the nucleation center twist in concert with one another. Alternating bright and dark concentric bands are apparent when films are viewed between crossed polarizers, indicating an alternating pattern of crystallographic faces exposed at the film surface. Band-dependent reorganization of the TTF crystals was observed during exposure to methanol vapor. Crystalline growth appears on bright bands at the expense of the dark bands. After a 24 h period of exposure to methanol vapor, the original spherulites were completely restructured, and the films comprise isolated, concentric circles of crystallites whose orientations are determined by the initial TTF crystal fibril orientation. While the surface of these outgrowths appears faceted and smooth, cross-sectional SEM images revealed a semiporous inner structure, suggesting solvent-vapor-induced recrystallization. Collectively, these results show that crystal twisting can be used to rhythmically redistribute material. Crystal twisting is a common and often controllable phenomenon independent of molecular or crystal structure and therefore offers a generalizable path to spontaneous pattern formation in a wide range of materials.
In the last century, molecular crystals functioned predominantly as a means for determining the molecular structures via X-ray diffraction, albeit as the century came to a close the response of molecular crystals to electric, magnetic, and light fields revealed that the physical properties of molecular crystals were as rich as the diversity of molecules themselves. In this century, the mechanical properties of molecular crystals have continued to enhance our understanding of the colligative responses of weakly bound molecules to internal frustration and applied forces. Here, the authors review the main themes of research that have developed in recent decades, prefaced by an overview of the particular considerations that distinguish molecular crystals from traditional materials such as metals and ceramics. Many molecular crystals will deform themselves as they grow under some conditions. Whether they respond to intrinsic stress or external forces or interactions among the fields of growing crystals remains an open question. Photoreactivity in single crystals has been a leading theme in organic solid-state chemistry; however, the focus of research has been traditionally on reaction stereo- and regio-specificity. However, as light-induced chemistry builds stress in crystals anisotropically, all types of motions can be actuated. The correlation between photochemistry and the responses of single crystals-jumping, twisting, fracturing, delaminating, rocking, and rolling-has become a well-defined field of research in its own right: photomechanics. The advancement of our understanding requires theoretical and high-performance computations. Computational crystallography not only supports interpretations of mechanical responses, but predicts the responses itself. This requires the engagement of classical force-field based molecular dynamics simulations, density functional theory-based approaches, and the use of machine learning to divine patterns to which algorithms can be better suited than people. The integration of mechanics with the transport of electrons and photons is considered for practical applications in flexible organic electronics and photonics. Dynamic crystals that respond rapidly and reversibly to heat and light can function as switches and actuators. Progress in identifying efficient shape-shifting crystals is also discussed. Finally, the importance of mechanical properties to milling and tableting of pharmaceuticals in an industry still dominated by active ingredients composed of small molecule crystals is reviewed. A dearth of data on the strength, hardness, Young's modulus, and fracture toughness of molecular crystals underscores the need for refinement of measurement techniques and conceptual tools. The need for benchmark data is emphasized throughout.
BACKGROUND: Controlling malaria-transmitting Anopheles mosquitoes with pyrethroid insecticides is becoming increasingly challenging because of widespread resistance amongst vector populations. The development of new insecticides and insecticidal formulations is time consuming and costly, however. A more active crystalline form of deltamethrin, prepared by heating the commercial crystalline form, previously was reported to be 12-times faster acting against susceptible North American Anopheles quadrimaculatus mosquitoes. Herein the potential for heat-activated deltamethrin dispersed on chalk to overcome various resistance mechanisms amongst five West African Anopheles strains is investigated, and its long-term sustained lethality evaluated. METHODS: The more active deltamethrin form was generated in a commercial dust containing deltamethrin by heating the material as purchased. Tarsal contact bioassays were conducted to investigate its efficacy, potency, and speed of action against resistant Anopheles populations compared to the commercially available form of deltamethrin dust. RESULTS: In all cases, D-Fense Dust heated to generate the more active form of deltamethrin was substantially more effective than the commercially available formulation. 100% of both Banfora M and Kisumu populations were knocked down 10 min post-exposure with no recovery afterwards. Gaoua-ara and Tiefora strains exhibited 100% knockdown within 15 min, and the VK7 2014 strain exhibited 100% knockdown within 20 min. In all cases, 100% mortality was observed 24 h post-exposure. Conversely, the commercial formulation (unheated) resulted in less than 4% mortality amongst VK7 2014, Banfora, and Gaoua-ara populations by 24 h, and Tiefora and Kisumu mosquitoes experienced 14 and 47% mortality by 24 h, respectively. The heat-activated dust maintained comparable efficacy 13 months after heating. CONCLUSIONS: The heat-activated form of commercial deltamethrin D-Fense Dust outperformed the material as purchased, dramatically increasing efficacy against all tested pyrethroid-resistant strains. This increase in lethality was retained for 13 months of storage under ambient conditions in the laboratory. Higher energy forms of commonly used insecticides may be employed to overcome various resistance mechanisms seen in African Anopheles mosquitoes through more rapid uptake of insecticide molecules from their respective solid surfaces. That is, resistant mosquitoes can be killed with an insecticide to which they are resistant without altering the molecular composition of the insecticide.
Anopheles , Insecticides , Pyrethrins , Animals , Insecticides/pharmacology , Insecticide Resistance , Mosquito Control/methods , Mosquito Vectors , Pyrethrins/pharmacology , Nitriles/pharmacology
A great proportion of molecular crystals can be made to grow as twisted fibrils. Typically, this requires high crystallization driving forces that lead to spherulitic textures. Here, it is shown how micron size channels fabricated from poly(dimethylsiloxane) (PDMS) serve to collimate the circular polycrystalline growth fronts of optically banded spherulites of twisted crystals of three compounds, coumarin, 2,5-bis(3-dodecyl-2-thienyl)-thiazolo[5,4-d]thiazole, and tetrathiafulvalene. The relationships between helicoidal pitch, growth front coherence, and channel width are measured. As channels spill into open spaces, collimated crystals "diffract" via small angle branching. On the other hand, crystals grown together from separate channels whose bands are out of phase ultimately become a single in-phase bundle of fibrils by a cooperative mechanism yet unknown. The isolation of a single twist sense in individual channels is described. We forecast that such chiral molecular crystalline channels may function as chiral optical wave guides.
Many molecular crystals (approximately one third) grow as twisted, helicoidal ribbons from the melt, and this preponderance is even higher in restricted classes of materials, for instance, charge-transfer complexes. Previously, twisted crystallites of such complexes present an increase in carrier mobilities. Here, the effect of twisting on charge mobility is better analyzed for a monocomponent organic semiconductor, 2,5-bis(3-dodecyl-2-thienyl)-thiazolo[5,4-d]thiazole (BDT), that forms twisted crystals with varied helicoidal pitches and makes possible a correlation of twist strength with carrier mobility. Films are analyzed by X-ray scattering and Mueller matrix polarimetry to characterize the microscale organization of the polycrystalline ensembles. Carrier mobilities of organic field-effect transistors are five times higher when the crystals are grown with the smallest pitches (most twisted), compared to those with the largest pitches, along the fiber elongation direction. A tenfold increase is observed along the perpendicular direction. Simulation of electrical potential based on scanning electron microscopy images and density functional theory suggests that the twisting-enhanced mobility is mainly controlled by the fiber organization in the film. A greater number of tightly packed twisted fibers separated by numerous smaller gaps permit better charge transport over the film surface compared to fewer big crystallites separated by larger gaps.
Aberrant crystallization within the human body can lead to several disease states or adverse outcomes, yet much remains to be understood about the critical stages leading to these events, which can include crystal nucleation and growth, crystal aggregation, and the adhesion of crystals to cells. Kidney stones, which are aggregates of single crystals with physiological origins, are particularly illustrative of pathological crystallization, with 10% of the U.S. population experiencing at least one stone occurrence in their lifetimes. The human record of kidney stones is more than 2000 years old, as noted by Hippocrates in his renowned oath and much later by Robert Hooke in his treatise Micrographia. William Hyde Wollaston, who was a physician, chemist, physicist, and crystallographer, was fascinated with stones, leading him to discover an unusual stone that he described in 1810 as cystic oxide, later corrected to cystine. Despite this long history, however, a fundamental understanding of the stages of stone formation and the rational design of therapies for stone prevention have remained elusive.This Account reviews discoveries and advances from our laboratories that have unraveled the complex crystal growth mechanisms of l-cystine, which forms l-cystine kidney stones in at least 20â¯000 individuals in the U.S. alone. Although l-cystine stones affect fewer individuals than common calcium oxalate stones, they are usually larger, recur more frequently, and are more likely to cause chronic kidney disease. Real-time in situ atomic force microscopy (AFM) reveals that the crystal growth of hexagonal l-cystine is characterized by a complex mechanism in which six interlaced anisotropic spirals grow synchronously, emanating from a single screw dislocation to generate a micromorphology with the appearance of stacked hexagonal islands. In contrast, proximal heterochiral dislocations produce features that appear to be spirals but actually are closed loops, akin to a Frank-Read source. These unusual and aesthetic growth patterns can be explained by the coincidence of the dislocation Burgers vector and the crystallographic 61 screw axis. Inhibiting l-cystine crystal growth is key to preventing stone formation. Decades of studies of "tailor-made additives", which are imposter molecules that closely resemble the solute and bind to crystal faces through molecular recognition, have demonstrated their effects on crystal properties such as morphology and polymorphism. The ability to visualize crystal growth in real time by AFM enables quantitative measurements of step velocities and, by extension, the effect of prospective inhibitors on growth rates, which can then be used to deduce inhibition mechanisms. Investigations with a wide range of prospective inhibitors revealed the importance of precise molecular recognition for binding l-cystine imposters to crystal sites, which results in step pinning and the inhibition of step advancement as well as the growth of bulk crystals. Moreover, select inhibitors of crystal growth, measured in vitro, reduce or eliminate stone formation in knockout mouse models of cystinuria, promising a new pathway to l-cystine stone prevention. These observations have wide-ranging implications for the design of therapies based on tailor-made additives for diseases associated with aberrant crystallization, from disease-related stones to "xenostones" that form in vivo because of the crystallization of low-solubility therapeutic agents such as antiretroviral agents.
Cystinuria , Kidney Calculi , Animals , Crystallization , Cystine/chemistry , Cystine/metabolism , Cystine/therapeutic use , Cystinuria/complications , Cystinuria/drug therapy , Cystinuria/metabolism , Kidney , Kidney Calculi/chemistry , Kidney Calculi/etiology , Kidney Calculi/prevention & control , Male , Mice
The concept of Eshelby untwisting, the effect of an axial screw dislocation driving an intrinsically twisted nanocrystal towards a straighter configuration more consistent with long-range translational symmetry, is introduced here. Force-field simulations of nanorods built from the enantiomorphous (space groups, P3121 and P3221) crystal structures of benzil (C6H5-C(O)-C(O)-C6H5) were previously shown to twist in opposite directions, even in the absence of dislocations. Here, both right- and left-handed screw dislocations were introduced into benzil nanorods in silico. For rods built from the P3221 enantiomorph, dislocations with negative Burgers vectors increased the right-handed twisting already present in the intrinsically twisted structures without dislocations, whereas dislocations with positive Burgers vectors drove the twisted structure back towards a straight configuration, untwisting. In the dynamic simulations, the P3221 helicoid endowed with a positive Burgers vector ultimately twisted back through the straight configuration, until a helicoid of opposite sense from that of the starting structure, was obtained. The bearing of these observations on the propensity of small crystals to adopt non-polyhedral morphologies is discussed.
Vaterite helicoids [W. Jiang et al., Nat. Commun., 2017, 8, 15066] are chiral, polycrystalline suprastructures grown in the presence of the amino acids, aspartic (Asp) or glutamic (Glu) acid, that are abundant in proteins regulating biomineralization. These complex objects are composed of hexagonal vaterite nanocrystals assembled as curved-edge platelets that form chiral ensembles. The sense stacked platelets is correlated with the stereochemistry of the amino acid additive: l-Asp gives counterclockwise architectures while d-Asp gives the clockwise enantiomorphs. As new layers stack, platelets become progressively inclined with respect to the substrate suface. The growth and structure of vaterite helicoids was originally evidenced by electron microscopy and atomic force microscopy. Here, we develop an optical model for describing polarized light transmission through helicoids as measured by Mueller matrix polarimetry. The close agreement between experimental measurements and simulation confirms that the propellor-like organization of inclined platelets creates optically active structures determined by growth additive stereochemistry. The microscopy employed demonstrates the information that can be obtained by complete polarimetry using a camera as a light detector, a technique that could be applied profitably to all manner of complex structures organized from anisotropic particles.
Calcium Carbonate/chemistry , Microscopy, Polarization/instrumentation , Microscopy, Polarization/methods , Nanostructures/chemistry , Anisotropy , Aspartic Acid/chemistry , Crystallization , Glutamic Acid/chemistry , Humans , Models, Theoretical , Molecular Conformation , Structure-Activity Relationship , Surface Properties
The growth of spontaneously twisted crystals is a common but poorly understood phenomenon. An analysis of the formation of twisted crystals of a metastable benzamide polymorph (form II) crystallizing from highly supersaturated aqueous and ethanol solutions is given here. Benzamide, the first polymorphic molecular crystal reported (1832), would have been the first helicoidal crystal observed had the original authors undertaken an analysis by light microscopy. Polymorphism and twisting frequently concur as they are both associated with high thermodynamic driving forces for crystallization. Optical and electron microscopies as well as electron and powder X-ray diffraction reveal a complex lamellar structure of benzamide form II needle-like crystals. The internal stress produced by the overgrowth of lamellae is shown to be able to create a twist moment that is responsible for the observed non-classical morphologies.
In anisotropic crystals, optical isotropic points are wavelengths where linear birefringence disappears because the refractive indices for both eigenmodes are accidentally equivalent. Here, the optical isotropic point of ethylene-diammonium selenate (EDSe) is tuned by generating a solid-solution series of EDSe doped with sulfate. Mueller matrix polarimetry and single-crystal X-ray diffraction are used to correlate changes in linear birefringence with the crystal composition of EDS x Se1-x . A scheme for using mixed crystals with isotropic points as tunable birefringent optical bandpass filters is proposed and their performance is modeled.
Symmetry considerations preclude the possibility of twist or continuous helical symmetry in bulk crystalline structures. However, as has been shown nearly a century ago, twisted molecular crystals are ubiquitous and can be formed by about 1/4 of organic substances. Despite its ubiquity, this phenomenon has so far not been satisfactorily explained. In this work we study twisted molecular crystals as geometrically frustrated assemblies. We model the molecular constituents as uniaxially twisted cubes and examine their crystalline assembly. We exploit a renormalization group (RG) approach to follow the growth of the rod-like twisted crystals these constituents produce, inquiring in every step into the evolution of their morphology, response functions and residual energy. The gradual untwisting of the rod-like frustrated crystals predicted by the RG approach is verified experimentally using silicone rubber models of similar geometry. Our theory provides a mechanism for the conveyance of twist across length-scales observed experimentally and reconciles the apparent paradox of a twisted single crystal as a finite size effect.
A new inclusion compound consisting of a guanidinium 1,3,5-tri(4-sulfophenyl)benzene (G3TSPHB) host framework containing isophorone guests that surround isolated and seemingly inaccessible pockets was amenable to guest exchange with hexafluorobenzene (HFB) through a single crystal-single crystal transformation (SCSCT). Single-crystal X-ray diffraction of intermediate transformation states, from the parent compound G3TSPHB·(isophorone)3.7·(methanol)5.4 to the final state G3TSPHB·(isophorone)3.1·(HFB)2·(methanol)2, indicated a crystal symmetry change from monoclinic to hexagonal prior to full incorporation of HFB. Optical microscopy during the SCSCT revealed the formation of lamellae, which expanded and then coalesced into a single crystal when the phase transformation was complete. In situ Raman microscopy revealed changes in the orientation of isophorone guests during the transformation that suggested a pathway for HFB entry into the host cavities. The SCSCT occurs more rapidly than expected on the basis of simple diffusion, consistent with facilitated transport along the lamellae interfaces and a reduction in the length scale for guest exchange.
X-ray powder diffraction and crystal structure prediction (CSP) algorithms were used in synergy to establish the crystal structure of the eighth polymorph of 5-methyl-2-[(2-nitrophenyl)amino]-3-thiophenecarbonitrile (ROY), form R05. R05 crystallizes in the monoclinic space group P21 with lattice parameters a = 11.479(4) Å, b = 11.030(1) Å, c = 10.840(6) Å, ß = 118.23(1)°. This is both the first acentric ROY polymorph, and the first with Z' > 1. The torsion angles defined by the S-C-N-C atom sequence of each molecule in the asymmetric unit (R05-1 and R05-2) are 44.9° and -34.0°. These values are between those previously determined for the red and orange forms of ROY. The crystal packing and intermolecular interactions in R05 are explained herein through Hirshfeld surface analysis and an updated energy stability ranking is determined using computational methods. Although the application of CSP was critical to the structure solution of R05, energy stability rankings determined using a series of DFT van der Waals (vdW)-inclusive models substantially differ from experiment, indicating that ROY polymorphism continues to be a challenge for CSP.
Thiophenes/chemistry , Crystallization , Crystallography, X-Ray , Models, Molecular , Quantum Theory , Thermodynamics
Dislocations in molecular crystals remain terra incognita. Owing to the complexity of molecular structure, dislocations in molecular crystals can be difficult to understand using only the foundational concepts devised over decades for hard materials. Herein, we review the generation, structure, and physicochemical consequences of dislocations in molecular crystals. Unlike metals, ceramics, and semiconductors, molecular crystals are often characterized by flexible building units of low symmetry, thereby limiting analysis, complicating modeling, and prompting new approaches to elucidate their role in crystallography from growth to mechanics. Such considerations affect applications ranging from plastic electronics and mechanical actuators to the tableting of pharmaceuticals.
l-Cystine kidney stones-aggregates of single crystals of the hexagonal form of l-cystine-afflict more than 20â¯000 individuals in the United States alone. Current therapies are often ineffective and produce adverse side effects. Recognizing that the growth of l-cystine crystals is a critical step in stone pathogenesis, real-time in situ atomic force microscopy of growth on the (0001) face of l-cystine crystals and measurements of crystal growth anisotropy were performed in the presence of prospective inhibitors drawn from a 31-member library. The most effective molecular imposters for crystal growth inhibition were l-cystine mimics (aka molecular imposters), particularly l-cystine diesters and diamides, for which a kinetic analysis revealed a common inhibition mechanism consistent with Cabrera-Vermilyea step pinning. The amount of inhibitor incorporated by l-cystine crystals, estimated from kinetic data, suggests that imposter binding to the {0001} face is less probable than binding of l-cystine solute molecules, whereas imposter binding to {101Ì 0} faces is comparable to that of l-cystine molecules. These estimates were corroborated by computational binding energies. Collectively, these findings identify the key structural factors responsible for molecular recognition between molecular imposters and l-cystine crystal kink sites, and the inhibition of crystal growth. The observations are consistent with the reduction of l-cystine stone burden in mouse models by the more effective inhibitors, thereby articulating a strategy for stone prevention based on molecular design.
Interactions of macromolecules with growing crystalline surfaces play an important role in biomineralization, determine survival of some organisms at low temperatures, and offer a range of potential industrial applications. The current understanding of crystal growth processes in the presence of macromolecules, including peptides and proteins, is reviewed, with a focus on interactions between macromolecules and surfaces of crystalline materials, macromolecule adsorption on different types of crystal surfaces, crystallization kinetics in the presence of macromolecular additives, macromolecule incorporation, and defect generation. Throughout, special attention is paid to the selectivity of macromolecule adsorption on, and incorporation within, crystal surfaces. The special role played by the size and complexity of macromolecules as compared to other crystallization additives is emphasized.
