Nanocomposites of Conducting Polymers and 2D Materials for Flexible Supercapacitors.

Flexible supercapacitors (FSCs) with high electrochemical and mechanical performance are inevitably necessary for the fabrication of integrated wearable systems. Conducting polymers with intrinsic conductivity and flexibility are ideal active materials for FSCs. However, they suffer from poor cycling stability due to huge volume variations during operation cycles. Two-dimensional (2D) materials play a critical role in FSCs, but restacking and aggregation limit their practical application. Nanocomposites of conducting polymers and 2D materials can mitigate the above-mentioned drawbacks. This review presents the recent progress of those nanocomposites for FSCs. It aims to provide insights into the assembling strategies of the macroscopic structures of those nanocomposites, such as 1D fibers, 2D films, and 3D aerogels/hydrogels, as well as the fabrication methods to convert these macroscopic structures to FSCs with different device configurations. The practical applications of FSCs based on those nanocomposites in integrated self-powered sensing systems and future perspectives are also discussed.

A PVDF/g-C3N4-Based Composite Polymer Electrolytes for Sodium-Ion Battery.

As one of the most promising candidates for all-solid-state sodium-ion batteries and sodium-metal batteries, polyvinylidene difluoride (PVDF) and amorphous hexafluoropropylene (HFP) copolymerized polymer solid electrolytes still suffer from a relatively low room temperature ionic conductivity. To modify the properties of PVDF-HEP copolymer electrolytes, we introduce the graphitic C3N4 (g-C3N4) nanosheets as a novel nanofiller to form g-C3N4 composite solid polymer electrolytes (CSPEs). The analysis shows that the g-C3N4 filler can not only modify the structure in g-C3N4CSPEs by reducing the crystallinity, compared to the PVDF-HFP solid polymer electrolytes (SPEs), but also promote a further dissociation with the sodium salt through interaction between the surface atoms of the g-C3N4 and the sodium salt. As a result, enhanced electrical properties such as ionic conductivity, Na+ transference number, mechanical properties and thermal stability of the composite electrolyte can be observed. In particular, a low Na deposition/dissolution overpotential of about 100 mV at a current density of 1 mA cm-2 was found after 160 cycles with the incorporation of g-C3N4. By applying the g-C3N4 CSPEs in the sodium-metal battery with Na3V2(PO4)3 cathode, the coin cell battery exhibits a lower polarization voltage at 90 mV, and a stable reversible capacity of 93 mAh g-1 after 200 cycles at 1 C.

A rechargeable Mg|O2 battery.

Rechargeable Mg|O2 batteries (RMOBs) offer several advantages over alkali metal-based battery systems owing to Mg's ease of transport/storage in ambient environment, low cost originating from its high abundance, as well as the high theoretical specific energy of RMOBs. However, research on RMOBs has been stagnant for the past decade, largely owing to unacceptably poor electrochemical performance. Here, we present a RMOB that employs Mg anode, Mg((CF3SO2)2N)2-MgCl2 in diglyme (G2) electrolyte, and commercial Pt/C on carbon fiber paper (Pt/C@CFP) oxygen cathode. This battery demonstrates unparalleled improvement over existing RMOBs by rendering a discharge capacity over 1.6 mAh cm-2, achieving cycle lives up to 35 cycles with a cumulative energy density of ∼3.2 mWh cm-2 at room temperature. This RMOB system seeks to reignite the pursuit of novel electrochemical systems based on Mg-O2 chemistries.

Re-Stickable Yarn Supercapacitors with Vaper Phase Polymerized Multi-Layered Polypyrrole Electrodes for Smart Garments.

Yarn supercapacitors have attracted significant attention for wearable energy storage due to their ability to be directly integrated with garments. Conducting polymer polypyrrole (PPy) based yarn supercapacitors show limited cycling stability because of the huge volume changes during the charge-discharge processes. In addition, laundering may cause damage to such yarn supercapacitors. Here, the fabrication of PPy-based re-stickable yarn supercapacitors is reported with good cycling stability by employing vapor phase polymerization (VPP) and water-soluble polyethylene oxide (PEO) film as the adhesive layer. VPP duration and cycle are controlled to achieve multi-layered PPy electrodes. The assembled yarn supercapacitors show a good cycling stability with capacitance retention of 79.1% after 5000 charge-discharge cycles. The energy stored in the yarn supercapacitor is sufficient to power a photodetector. After gluing the yarn supercapacitors onto a PEO film, the devices can be stunk on and peeled off the garment to avoid the mechanical stresses during the washing process. Three yarn supercapacitors connected in parallel on PEO film show negative changes in electrochemical performance after 5 sticking-peeling cycles. This work provides a facile way to fabricate PPy-based re-stickable energy storage devices with high cycling stability for smart garments.

Graphene Composite via Bacterial Cellulose Assisted Liquid Phase Exfoliation for Sodium-Ion Batteries.

One of the most critical challenges for commercialization of sodium-ion battery (SIB) is to develop carbon anodes with high capacity and good rate performance. Graphene would be an excellent SIB anode candidate due to its success in various kinds of batteries. Liquid-phase exfoliation (LPE) method is an inexpensive, facile and potentially scalable method to produce less-defected graphene sheets. In this work, we developed an improved, dispersant-assisted LPE method to produce graphene composite materials from raw graphite with high yield and better quality for SIB anode. Here, bacterial cellulose (BC) was used as a green dispersant/stabilizer for LPE, a "spacer" for anti-restacking, as well as a carbon precursor in the composite. As a result, the carbonized BC (CBC)/LPE graphene (LEGr) presented improved performance compared to composite with graphene prepared by Hummers method. It exhibited a specific capacity of 233 mAh g-1 at a current density of 20 mA g-1, and 157 mAh g-1 after 200 cycles at a high current density of 100 mA g-1 with capacity retention rate of 87.73%. This method not only provides new insight in graphene composites preparation, but also takes a new step in the exploration of anode materials for sodium-ion batteriesSIBs.

Electrical Stimulation with a Conductive Polymer Promotes Neurite Outgrowth and Synaptogenesis in Primary Cortical Neurons in 3D.

Deficits in neurite outgrowth and synaptogenesis have been recognized as an underlying developmental aetiology of psychosis. Electrical stimulation promotes neuronal induction including neurite outgrowth and branching. However, the effect of electrical stimulation using 3D electrodes on neurite outgrowth and synaptogenesis has not been explored. This study examined the effect of 3D electrical stimulation on 3D primary cortical neuronal cultures. 3D electrical stimulation improved neurite outgrowth in 3D neuronal cultures from both wild-type and NRG1-knockout (NRG1-KO) mice. The expression of synaptophysin and PSD95 were elevated under 3D electrical stimulation. Interestingly, 3D electrical stimulation also improved neural cell aggregation as well as the expression of PSA-NCAM. Our findings suggest that the 3D electrical stimulation system can rescue neurite outgrowth deficits in a 3D culturing environment, one that more closely resembles the in vivo biological system compared to more traditionally used 2D cell culture, including the observation of cell aggregates as well as the upregulated PSA-NCAM protein and transcript expression. This study provides a new concept for a possible diagnostic platform for neurite deficits in neurodevelopmental diseases, as well as a viable platform to test treatment options (such as drug delivery) in combination with electrical stimulation.

A "Tandem" Strategy to Fabricate Flexible Graphene/Polypyrrole Nanofiber Film Using the Surfactant-Exfoliated Graphene for Supercapacitors.

The surfactant-assisted liquid-phase exfoliation of expanded graphite can produce graphene sheets in large quantities with minimal defects. However, it is difficult to completely remove the surfactant from the final product, thus affecting the electrochemical properties of the produced graphene. In this article, a novel approach to fabricate flexible graphene/polypyrrole film was developed: using surfactant cetyltrimethylammonium bromide as a template for growth of polypyrrole nanofibers (PPyNFs) instead of removal after the exfoliation process; followed by a simple filtration method. The introduction of PPyNF not only increases the electrochemical performance, but also ensures flexibility. This composite film electrode offers a capacitance up to 161 F g-1 along with a capacitance retention rate of over 80% after 5000 cycles.

A Cytocompatible Robust Hybrid Conducting Polymer Hydrogel for Use in a Magnesium Battery.

A cytocompatible robust hybrid conducting-polymer hydrogel, polypyrrole/poly(3,4-ethylenedioxythiophene) is developed. This hydrogel is suitable for electrode-cellular applications. It demonstrates a high battery performance when coupled with a bioresorbable Mg alloy in phosphate-buffered saline. A combination of suitable mechanical and electrochemical properties makes this hydrogel a promising material for bionic applications.

Novel reversible and switchable electrolytes based on magneto-rheology.

Replacing organic liquid electrolytes with solid electrolytes has led to a new perspective on batteries, enabling high-energy battery chemistry with intrinsically safe cell designs. However, most solid/gel electrolytes are easily deformed; under extreme deformation, leakage and/or short-circuiting can occur. Here, we report a novel magneto-rheological electrolyte (MR electrolyte) that responds to changes in an external magnetic field; the electrolyte exhibits low viscosity in the absence of a magnetic field and increased viscosity or a solid-like phase in the presence of a magnetic field. This change from a liquid to solid does not significantly change the conductivity of the MR electrolyte. This work introduces a new class of magnetically sensitive solid electrolytes that can enhance impact resistance and prevent leakage from electronic devices through reversible active switching of their mechanical properties.

One-step synthesis of graphene/polypyrrole nanofiber composites as cathode material for a biocompatible zinc/polymer battery.

The significance of developing implantable, biocompatible, miniature power sources operated in a low current range has become manifest in recent years to meet the demands of the fast-growing market for biomedical microdevices. In this work, we focus on developing high-performance cathode material for biocompatible zinc/polymer batteries utilizing biofluids as electrolyte. Conductive polymers and graphene are generally considered to be biocompatible and suitable for bioengineering applications. To harness the high electrical conductivity of graphene and the redox capability of polypyrrole (PPy), a polypyrrole fiber/graphene composite has been synthesized via a simple one-step route. This composite is highly conductive (141 S cm(-1)) and has a large specific surface area (561 m(2) g(-1)). It performs more effectively as the cathode material than pure polypyrrole fibers. The battery constructed with PPy fiber/reduced graphene oxide cathode and Zn anode delivered an energy density of 264 mWh g(-1) in 0.1 M phosphate-buffer saline.

Intrinsically stretchable supercapacitors composed of polypyrrole electrodes and highly stretchable gel electrolyte.

There has been an emerging interest in stretchable power sources compatible with flexible/wearable electronics. Such power sources must be able to withstand large mechanical strains and still maintain function. Here we report a highly stretchable H3PO4-poly(vinyl alcohol) (PVA) polymer electrolyte obtained by optimizing the polymer molecular weight and its weight ratio to H3PO4 in terms of conductivity and mechanical properties. The electrolyte demonstrates a high conductivity of 3.4 × 10(-3) S cm(-1), and a high fracture strain at 410% elongation. It is mechanically robust with a tensile strength of 2 MPa and a Young's modulus of 1 MPa, and displays a small plastic deformation (5%) after 1000 stretching cycles at 100% strain. A stretchable supercapacitor device has been developed based on buckled polypyrrole electrodes and the polymer electrolyte. The device shows only a small capacitance loss of 5.6% at 30% strain, and can retain 81% of the initial capacitance after 1000 cycles of such stretching.