Theranostic aspects of palladium-based bimetallic nanoparticles in biomedical field: A state-of-the-art.

The exploration of newer antibacterial strategies is driven by antibiotic-resistant microbes that cause serious public health issues. In recent years, nanoscale materials have developed as an alternative method to fight infections. Despite the fact that many nanomaterials have been discovered to be harmful, numerous researchers have shown a keen interest in nanoparticles (NPs) made of noble metals like silver, gold and platinum. To make environmentally safe NPs from plants, green chemistry and nanotechnology have been combined to address the issue of toxicity. The study of bimetallic nanoparticles (BNPs) has increased tremendously in the past 10 years. The production of BNPs mediated by natural extracts is straightforward, low cost and environmentally friendly. Due to their low toxicity, safety and biological stability, noble BNPs with silver, gold, platinum and palladium have the potential to be used in biomedical applications. They have a significant impact on human health and are used in medicine and pharmacy due to their biological characteristics, which include catalytic, antioxidant, antibacterial, antidiabetic, anticancer, hepatoprotective and regenerative activity.

Furan-2-carboxamide derivative, a novel microtubule stabilizing agent induces mitotic arrest and potentiates apoptosis in cancer cells.

The vital role played by microtubules in the cell division process, marks them as a potential druggable target to decimate cancer. A novel furan-2-carboxamide based small molecule, is a selective microtubule stabilizing agent (MSA) with IC50 ranging from 4 µM to 8 µM in different cancer cell lines. Inhibition of tubulin polymerization or stabilization of tubulin polymers abrogates chromosomal segregation during cell division, results in cell cycle arrest and leads to cell death due to the delayed repair mechanism. A novel furan-2-carboxamide based small molecule exhibited potent anti-proliferative and anti-metastatic property In-Vitro against the panel of cancer cells. Annexin V-FITC/PI, double staining reveals potent cytotoxic effect of SH09 against HeLa cells. FACS analysis displays induction of G2/M arrest and accumulation of subG1 population of cells upon treatment with SH09. Molecular docking study unveils SH09 binding affinity to the Taxol binding pocket of tubulin proteins and MM-GBSA also confirms strong binding energies of SH09 with tubulin proteins.

Hypersensitive Reaction to Tattoos: A Growing Menace in Rural India.

BACKGROUND: Increased enthusiasm toward newer fashion trends among rural India along with the lack of government regulation has led to increased tattoo reactions. OBJECTIVE: The objective of this study is to describe various clinical manifestations of hypersensitive reactions to tattoo ink reported at a tertiary care hospital in Mandya district. MATERIALS AND METHODS: An observational study was carried out over a period of 1 year from June 2014 to May 2015 at Mandya Institute of Medical Sciences, Mandya. All the patients reporting with allergic reaction due to tattooing were included in the present study after obtaining informed consent. Transient acute inflammatory reaction, infections, and skin diseases localized on tattooed area were excluded from this study. A detailed history regarding the onset, duration and color used for tattooing were collected. Cutaneous examination and biopsy was to done to know the type of reaction. RESULTS: Fifty cutaneous allergic reactions were diagnosed among 39 patients. Mean age of subjects was 22 years and mean duration before the appearance of lesion was 7 months. Common colors associated with reactions were red (53.9%), black (33.3%), green (5.1%), and multicolor (7.7%). Itching was the predominant symptom. Skin lesions mainly consisted of lichenoid papules and plaques, eczematous lesions, and verrucous lesions. Lichenoid histopathology reaction was the most common tissue allergic reaction. CONCLUSION: Increasing popularity of tattooing among young people has predisposed to parallel increase in adverse reactions. Red pigment is most common cause of allergic reaction in the present study, and lichenoid reaction is the most common reaction.

Concurrent Presentation of Erythrodermic Lichen Planus and Squamous Cell Carcinoma: Coincidence or Malignant Transformation?

Lichen planus is a common papulosquamous disorder affecting about 1-2% of the population, neoplastic transformation of cutaneous lichen planus lesions occurs very rarely. A 40 year old female patient presented with a 1 year history of developing multiple, itchy, pigmented lesions over both lower legs which gradually spread to involve the whole body. A few tense bullae were seen on the extremities. An erythematous fleshy lesion was seen on the upper aspect of the left buttock. Skin biopsy from a plaque on the right forearm showed features suggestive of lichen planus. Skin biopsy of a bullae showed a sub epidermal bulla filled with a mixed inflammatory infiltrate. Direct immunofluorescence revealed no immunoreactants along the basement membrane zone. A diagnosis of erythrodermic lichen planus with bullous lichen planus was made. Biopsy of fleshy lesion of left buttock revealed a moderately differentiated squamous cell carcinoma. Erythrodermic lichen planus with bullous lesions and secondary squamous cell carcinoma; these occurences in a single patient is extremely rare and has not been previously reported to the best of our knowledge.

Hirsutenone Directly Targets PI3K and ERK to Inhibit Adipogenesis in 3T3-L1 Preadipocytes.

Adipogenesis is a key driver of the expansion of adipose tissue mass that causes obesity. Hirsutenone (HST) is an active botanical diarylheptanoid present in Alnus species. In this study, we evaluated the effects of HST on adipogenesis, its mechanisms of action and the molecular targets involved. Using Oil Red O staining, we observed that HST dose-dependently suppresses lipid accumulation during adipogenesis in 3T3-L1 preadipocytes, concomitant with a decrease in peroxisome proliferator-activated receptor-γ (PPARγ), CCAAT/enhancer-binding protein α (C/EBPα) and fatty acid synthase (FAS) protein expression. This inhibitory effect was largely limited to the early stage of adipogenesis, which includes mitotic clonal expansion (MCE), as evidenced by delayed cell cycle entry of preadipocytes from G1 to S phase. Furthermore, the regulation of MCE was accompanied by suppression of phosphatidylinositol 3-kinase (PI3K) and extracellular-regulated kinase (ERK) activity. HST was also shown to bind directly to PI3K and ERK1 in a non-ATP competitive manner. Our results suggest that HST attenuates adipogenesis by directly targeting PI3K and ERK during MCE in 3T3-L1 preadipocytes, underscoring the potential therapeutic application of HST in preventing obesity.

Effect of barley flour on rheological characteristics of dough, organoleptic, nutritional and storage characteristics of south Indian parotta.

Barley (Hordeum sativum) is a good source of dietary fibre, particularly ß-glucan. Effect of 10, 20, 30 and 40% barley flour on the rheological characteristics of dough and quality characteristics of south Indian parotta was studied. Use of increasing amount of barley flour from 0 to 40% increased farinograph water absorption and decreased stability, increased extensograph resistance to extension and decreased extensibility, decreased amylograph set back and increased peak viscosity values. Sensory analysis showed that use of barley flour above 30% brought about adverse effect on the quality of parotta. Addition of combination of 2% dry gluten powder and 0.001% xylanase enzyme, XY (combination of improvers) decreased elasticity, increased extensibility of the dough and quality of parotta with 30% BF. During 48 h of storage, parottas with 30% barley flour remained softer than control parotta. The total dietary fibre and ß-glucan contents of parotta with 30% BF were 2.0 and 10.5 times higher than the control parotta.

Roller milling fractionation of green gram (Vigna radiata): optimization of milling conditions and chemical characterization of millstreams.

In the view of recent growing interest in utilization of grain fractions as food ingredient, present investigation was carried out to evaluate the roller milling potential of green gram. The effect of conditioning moistures on green gram roller milling were studied. The results showed decrease in flour yield from 85.56 to 58.74 % with increase in conditioning moisture from 10 to 16 %. Higher yield of flour was observed from the first (C1), second (C2) and third (C3) reduction passages; whereas, the first (B1), second (B2) and third (B3) break passages produced less flour. The distribution of protein, dietary fiber, ash and fat in different flour streams and by-products from roller milled fractions of green gram showed wide variation. The protein content increased with increasing numbers of breaks and reductions in the flour streams. The highest protein content of 30.16 % was found in bran duster flour and lowest (11.32 %) in fine seed coat. The protein content of break streams was found lower than reduction streams. The dietary fiber content of coarse seed coat was highest (71.17 %) followed by the fine seed coat (57.22 %). The microstructure studies of milled fractions of green gram showed more deformed and damaged starch granules in reduction flour streams than break flour streams.

Oxidative enzyme changes in sorghum infested by shoot fly.

This research investigated the role of oxidative enzymes in the defense response of sorghum, Sorghum bicolor (L.) Moench (Poales: Poaceae), to the sorghum shoot fly, Atherigona soccata Rondani (Diptera: Muscidae). Changes in polyphenol oxidase and peroxidase activity and total protein content were observed in resistant and susceptible sorghum genotypes in response to A. soccata feeding. Resistant plants exhibited higher levels of peroxidase and polyphenol oxidase activities and total protein content compared with susceptible plants. Peroxidase and polyphenol oxidase activities and total protein content in the infested resistant and susceptible genotypes were higher when compared with their control plants, respectively. These findings suggest that resistant genotypes may be able to tolerate shoot fly feeding by increasing their peroxidase and polyphenol oxidase activities. Among the enzymes examined, differences in isozyme profiles for peroxidase and polyphenol oxidase were detected between control and infested IS 18551, M35-1, 296B, SSV 84, and DJ 6514 plants. Differences in protein profiles were observed between A. soccata infested and their respective uninfested controls of all the genotypes. In conclusion, this study revealed that these defense enzymes and proteins might attribute to the resistance mechanisms in sorghum plants against A. soccata infestation.

Chemical, rheological and bread making characteristics of bran duster flours from roller flourmills.

Bran dusters are used in the wheat flour milling process to increase flour extraction rate. Chemical, rheological and bread characteristics of bran duster flours (BDR1, BDR2, BDR3) and straight run flour (SRF) obtained from two commercial roller flour mills were analyzed. Important chemical characteristics such as ash, dry gluten content, sedimentation value, damaged starch and falling number of bran duster flours were determined. Rheological behavior was tested using farinograph and alveograph equipments. The results showed an increase in ash, dry gluten content and Zeleny's sedimentation value for bran duster flours compared to SRF. Rheological characteristics indicated higher farinograph dough development time and stability values for bran duster flours. Alveograph characteristics indicated higher extensibility and lower elasticity values for bran duster flours. Over all quality score of bread for BDR1 from A and B roller flour mills ranged from 73.4 to 74.7, BDR2 (79-81.8), BDR3 (69-70.4) as against SRF (85.4-86.3).

Dosimetric comparison of high dose rate brachytherapy and intensity-modulated radiation therapy for cervical carcinoma.

Intracavitary brachytherapy is an integral part of radiotherapy for locally advanced gynecologic malignancies. A dosimetric intercomparison of high dose rate intracavitary brachytherapy (HDR_BT) and intensity-modulated radiotherapy in cervical carcinoma has been made in the present study. CT scan images of 10 patients treated with HDR_BT were used for this study. A sliding-window IMRT (IMRT_SW) and step-and-shoot IMRT plans were generated using 6-MV X-rays. The cumulative dose volume histograms of target, bladder, rectum and normal tissue were analyzed for both techniques and dose distributions were compared. It was seen that the pear-shaped dose distribution characteristic of intracavitary brachytherapy with sharp dose fall-off outside the target could be achieved with IMRT. The integral dose to planning target volume was significantly higher with HDR_BT in comparison with IMRT. Significant differences between the two techniques were seen for doses to 1 cc and 2 cc of rectum, while the differences in 1 cc and 2 cc doses to bladder were not significant. The integral doses to the nontarget critical and normal structures were smaller with HDR_BT and with IMRT. It is concluded that IMRT can be the choice of treatment in case of non-availability of HDR brachytherapy facilities or when noninvasive treatments are preferred.

Optimized dose distribution of Gammamed plus vaginal cylinders.

Endometrial carcinoma is the most common malignancy arising in the female genital tract. Intracavitary vaginal cuff irradiation may be given alone or with external beam irradiation in patients determined to be at risk for locoregional recurrence. Vaginal cylinders are often used to deliver a brachytherapy dose to the vaginal apex and upper vagina or the entire vaginal surface in the management of postoperative endometrial cancer or cervical cancer. The dose distributions of HDR vaginal cylinders must be evaluated carefully, so that clinical experiences with LDR techniques can be used in guiding optimal use of HDR techniques. The aim of this study was to optimize dose distribution for Gammamed plus vaginal cylinders. Placement of dose optimization points was evaluated for its effect on optimized dose distributions. Two different dose optimization point models were used in this study, namely non-apex (dose optimization points only on periphery of cylinder) and apex (dose optimization points on periphery and along the curvature including the apex points). Thirteen dwell positions were used for the HDR dosimetry to obtain a 6-cm active length. Thus 13 optimization points were available at the periphery of the cylinder. The coordinates of the points along the curvature depended on the cylinder diameters and were chosen for each cylinder so that four points were distributed evenly in the curvature portion of the cylinder. Diameter of vaginal cylinders varied from 2.0 to 4.0 cm. Iterative optimization routine was utilized for all optimizations. The effects of various optimization routines (iterative, geometric, equal times) was studied for the 3.0-cm diameter vaginal cylinder. The effect of source travel step size on the optimized dose distributions for vaginal cylinders was also evaluated. All optimizations in this study were carried for dose of 6 Gy at dose optimization points. For both non-apex and apex models of vaginal cylinders, doses for apex point and three dome points were higher for the apex model compared with the non-apex model. Mean doses to the optimization points for both the cylinder models and all the cylinder diameters were 6 Gy, matching with the prescription dose of 6 Gy. Iterative optimization routine resulted in the highest dose to apex point and dome points. The mean dose for optimization point was 6.01 Gy for iterative optimization and was much higher than 5.74 Gy for geometric and equal times routines. Step size of 1 cm gave the highest dose to the apex point. This step size was superior in terms of mean dose to optimization points. Selection of dose optimization points for the derivation of optimized dose distributions for vaginal cylinders affects the dose distributions.