Efficacy of different mouthwashes against COVID-19: A systematic review and network meta-analysis.

To evaluate the effectiveness of antiseptic mouthwashes in reducing SARS-CoV-2 load clinically and in vitro. A systematic electronic search (MEDLINE/Scopus/Cochrane) was conducted to identify prospective clinical and in vitro studies published between 2019 included and 16 June 2023 assessing the effectiveness of mouthwashes in reducing SARS-CoV-2 load in saliva or surrogates. Data were summarized in tables and a network meta-analysis was performed for clinical trials. Thirty-five studies (14 RCTs, 21 in vitro) fulfilled the inclusion criteria. The risk of bias was judged to be high for 2 clinical and 7 in vitro studies. The most commonly test product was chlorhexidine alone or in combination with other active ingredients, followed by povidone-iodine, hydrogen peroxide and cetylpyridinium chloride. Overall, the descriptive analysis revealed the effectiveness of the mouthwashes in decreasing the salivary viral load both clinically and in vitro. Network meta-analysis demonstrated a high degree of heterogeneity. Among these studies, only chlorhexidine 0.20% was associated to a significant Ct increase in the saliva 5 min after rinsing compared to non-active control (p = 0.027). Data from clinical and in vitro studies suggested the antiviral efficacy of commonly used mouthwashes. Large well-balanced trials are needed to identify the best rinsing protocols.

In vitro evaluation of granules obtained from 3D sphene scaffolds and bovine bone grafts: chemical and biological assays.

Sphene is an innovative bone graft material. The aim of this study was to investigate and compare the physicochemical and biological properties of Bio-Oss® (BO) and in-lab synthesized and processed sphene granules. BO granules of 1000-2000 µm (BO-L), 250-1000 µm (BO-S) and 100-200 µm (BO-p) for derived granules, and corresponding groups of sphene granules obtained from 3D printed blocks (SB-L, SB-S, SB-p) and foams (SF-L, SF-S and SF-p) were investigated. The following analyses were conducted: morphological analysis, specific surface area and porosity, inductively coupled plasma mass spectrometry (ICP-MS), cytotoxicity assay, Alizarin staining, bone-related gene expression, osteoblast migration and proliferation assays. All pulverized granules exhibited a similar morphology and SF-S resembled natural bone. Sphene-derived granules showed absence of micro- and mesopores and a low specific surface area. ICP-MS revealed a tendency for absorption of Ca and P for all BO samples, while sphene granules demonstrated a release of Ca. No cellular cytotoxicity was detected and osteoblastic phenotype in primary cells was observed, with significantly increased values for SF-L, SF-S, BO-L and BO-p. Further investigations are needed before clinical use can be considered.

Peri-Implant Bone Loss and Overload: A Systematic Review Focusing on Occlusal Analysis through Digital and Analogic Methods.

The present review aimed to assess the possible relationship between occlusal overload and peri-implant bone loss. In accordance with the PRISMA guidelines, the MEDLINE, Scopus, and Cochrane databases were searched from January 1985 up to and including December 2021. The search strategy applied was: (dental OR oral) AND implants AND (overload OR excessive load OR occlusal wear) AND (bone loss OR peri-implantitis OR failure). Clinical studies that reported quantitative analysis of occlusal loads through digital contacts and/or occlusal wear were included. The studies were screened for eligibility by two independent reviewers. The quality of the included studies was assessed using the Risk of Bias in Non-randomized Studies of Interventions (ROBINS-I) tool. In total, 492 studies were identified in the search during the initial screening. Of those, 84 were subjected to full-text evaluation, and 7 fulfilled the inclusion criteria (4 cohort studies, 2 cross-sectional, and 1 case-control). Only one study used a digital device to assess excessive occlusal forces. Four out of seven studies reported a positive correlation between the overload and the crestal bone loss. All of the included studies had moderate to serious overall risk of bias, according to the ROBINS-I tool. In conclusion, the reported data relating the occlusal analysis to the peri-implant bone level seem to reveal an association, which must be further investigated using new digital tools that can help to standardize the methodology.

The bone lid technique in lateral sinus lift: a systematic review and meta-analysis.

OBJECTIVE: This systematic review aimed at assessing the effect of the repositioned bone lid on bone augmentation in lateral sinus lift in pre-clinical in vivo and clinical studies. Secondary aims were to report on the healing of the bone window and to assess the implant survival rate. MATERIAL AND METHODS: Animal and human studies comparing lateral maxillary sinus floor elevation in combination or not with the repositioned bone lid were retrieved from MEDLINE (PubMed), Web of Science and Cochrane online library. Studies published in English up to April 2022 and reporting on histological and/or radiographic outcomes were considered. Case reports, case series and reviews were excluded. A hand search was also conducted. Risk of bias was assessed and meta-analysis performed to investigate the effect of the bone lid on new bone formation. RESULTS: After screening, 5 animal studies (4 in rabbits, 1 in sheep) and 2 clinical studies (1 RCT, 1 case-control) were included. Meta-analysis confirmed a higher new bone formation in rabbits at 2 and 8 weeks using the bone lid. The two clinical studies investigated lateral sinus lift with concomitant implant placement and reported similar results and high short-term implant success rate in both test and control groups. CONCLUSIONS: The meta-analysis provided moderate evidence that the repositioned bone lid favored the formation of new bone to a higher extent as compared to resorbable membranes in animal studies. Implant success seems not to be influenced by the technique in the short term.

Dentin Particulate for Bone Regeneration: An In Vitro Study.

The aim of this in vitro study was to investigate the commitment and behavior of dental pulp stem cells (DPSCs) seeded onto two different grafting materials, human dentin particulate (DP) and deproteinized bovine bone matrix (BG), with those cultured in the absence of supplements. Gene expression analyses along with epigenetic and morphological tests were carried out to examine odontogenic and osteogenic differentiation and cell proliferation. Compressive testing of the grafting materials seeded with DPSCs was performed as well. DPSC differentiation into odontoblast-like cells was identified from the upregulation of odontogenic markers (DSPP and MSX) and osteogenic markers (RUNX2, alkaline phosphatase, osteonectin, osteocalcin, collagen type I, bmp2, smad5/8). Epigenetic tests confirmed the presence of miRNAs involved in odontogenic or osteogenic commitment of DPSCs cultured for up to 21 days on DP. Compressive strength values obtained from extracellular matrix (ECM) synthesized by DPSCs showed a trend of being higher when seeded onto DP than onto BG. High expression of VEGF factor, which is related to angiogenesis, and of dentin sialoprotein was observed only in the presence of DP. Morphological analyses confirmed the typical phenotype of adult odontoblasts. In conclusion, the odontogenic and osteogenic commitment of DPSCs and their respective functions can be achieved on DP, which enables exceptional dentin and bone regeneration.

Mandibular Molar Uprighting Using Skeletal Anchorage: A Novel Approach.

BACKGROUND: The management of eruption anomalies affecting second molars, although quite uncommon, may represent a real challenge for the clinician. The aim of this study is to present a novel technique that combines the surgical and orthodontic approach in order to obtain the retrieval of impacted second molars through a complex distalizing movement and skeletal anchorage. METHODS: Nineteen consecutive patients with impacted second molars were treated according to this technique, which involved extraction of the third molar followed by the placement of a distally positioned screw, and the subsequent use of a coil spring to connect the screw to an eyelet directly bonded on the second molar. In selected cases, it proved to be necessary to reposition the second molar through traditional orthodontics. All of the parameters were recorded: the time required for completing the treatment, the initial angle between the second molar and the adjacent tooth, and treatment related-complications. RESULTS: Twenty impacted second molars were correctly repositioned. The mean initial angle of the second molar was 55.7° (SD 22.6°, min 13.3°, max 104.8°). The mean treatment time was 10 months. There were no major complications. CONCLUSIONS: Given that periodontal tissues were minimally affected, the temporary anchorage device was fully controlled, and there was no unwanted movement of adjacent teeth, the presented technique not only proved effective but also minimally invasive.

The Bone Lid Technique in Oral and Maxillofacial Surgery: A Scoping Review.

This scoping review aimed at reporting the outcomes of the bone lid technique in oral surgery in terms of bone healing, ridge preservation, and incidence of complications. Bone-cutting instruments and stabilization methods were also considered. PubMed, Scopus, and the Cochrane Register of Controlled Trials were searched using a combination of terms, including bone lid, bony window, piezosurgery, microsaw, cysts, endodontic surgery, impacted teeth, and maxillary sinus. A hand search was also performed. The last search was conducted on 30 November 2021. No date limitation was set. Searches were restricted to human clinical studies published in English. All types of study design were considered except reviews and case reports. After a two-step evaluation, 20 (2 randomized studies, 2 case-control studies, 3 cohort studies, 13 case series) out of 647 screened studies were included, reporting on 752 bone lid procedures. The bone lid technique was associated with favorable bone healing when compared to other methods, and with a very low incidence of major complications. Clinical indications, surgical procedures, study design, follow-up duration, and outcomes varied among the studies. Overall, favorable outcomes were reported using the bone lid approach, though evidence-based studies were scarce.

Exosomes Derived from Dental Pulp Stem Cells Show Different Angiogenic and Osteogenic Properties in Relation to the Age of the Donor.

Craniofacial tissue reconstruction still represents a challenge in regenerative medicine. Mesenchymal stem cell (MSC)-based tissue engineering strategies have been introduced to enhance bone tissue repair. However, the risk of related complications is limiting their usage. To overcome these drawbacks, exosomes (EXOs) derived from MSCs have been recently proposed as a cell-free alternative to MSCs to direct tissue regeneration. It was hypothesized that there is a correlation between the biological properties of exosomes derived from the dental pulp and the age of the donor. The aim of the study was to investigate the effect of EXOs derived from dental pulp stem cells of permanent teeth (old donor group) or exfoliated deciduous teeth (young donor group) on MSCs cultured in vitro. Proliferation potential was evaluated by doubling time, and commitment ability by gene expression and biochemical quantification for tissue-specific factors. Results showed a well-defined proliferative influence for the younger donor aged group. Similarly, a higher commitment ability was detected in the young group. In conclusion, EXOs could be employed to promote bone regeneration, likely playing an important role in neo-angiogenesis in early healing phases.

Four atypical cases of misdiagnosed facial cutaneous sinuses of dental origin.

BACKGROUND: Odontogenic cutaneous sinus tracts are frequently misdiagnosed as cutaneous non-dental related pathologies, due to their lack of a typical morphology, their extraoral location, and the frequent absence of concomitant dental symptoms. An erroneous diagnosis may lead to long-lasting, invasive, and not resolutive surgical and medical treatments. METHODS: Four patients referred to our department lamenting the presence of a recurrent facial cutaneous sinus tract. They all had already had different wrong diagnoses and were treated with not resolutive therapies or surgeries. After a clinical and radiographical oral examination, the cutaneous fistulas were found to have a dental etiology, and the extraction of the compromised tooth was performed. RESULTS: One week after the tooth extraction, all the patients presented good healing of the intraoral mucosa. At the long-term follow-up in all four cases, the definitive closure of the extraoral sinus tract and a reduction of the scar was found. CONCLUSIONS: If a facial sinus tract is present, the odontogenic etiology should always be considered, since it can easily bring to the correct diagnosis, leading to a rapid resolution of the fistula. Once the dental origin has been confirmed, the suggested treatment for a conclusive resolution of the cutaneous sinus tract is the endodontic treatment or the extraction of the affected tooth.

Biobanking in dentistry: A review.

Biobanks are not-for-profit services for the collection, processing, storage and distribution of biological samples and data for research and diagnostic purposes. In dentistry, biological materials and data obtained from questionnaires investigating oral conditions can be stored and used for large-scale studies on oral and systemic diseases. To give some examples: gene expression microarrays obtained on biobanked specimens were used in the identification of genetic alterations in oral cancer; efforts to identify genetic mechanisms behind dental caries have been based on an integrative analysis of transcriptome-wide associations and messenger RNA expression. One of the largest studies on facial pain was conducted using Biobank data. Cryopreservation of dental pulp stem cells is a common practice in tooth biobanks. With the exception of teeth and pulp, also leftover oral soft and hard tissues may represent a source of healthy samples that has rarely been exploited as yet. While biobanks are increasingly attracting the attention of the scientific community and becoming economically sustainable, a systematic approach to this resource in dentistry seems to be lacking. This review illustrates the applications of biobanking in dentistry, describing biobanked pathological and healthy samples and data, and discussing future developments.

Diode laser for the treatment of a high flow lip vascular malformation.

About 50% of vascular malformations are located at the head and neck region where they can usually be associated with functional and/or aesthetic limitations. Laser treatment has proven to be effective in treatment of small low-flow vascular malformations, but little is known about the use of this therapy for high-flow larger arteriovenous malformations (AVMs). A congenital high-flow vascular malformation of the upper lip had to be treated because it was causing functional impairment and deformity which were affecting the quality of life. The mainstay of treatment is surgical therapy after embolization of the lesion, but the treatment of high-flow lesions is difficult because of the high risk of mortality and morbidity. The lesion was then treated with transmucosal diode laser applications in multiple sessions. The lesion progressively reduced in dimension without any sign of recurrence after multiple sessions of transmucosal diode laser applications. The clinical examination and the ultrasound scan performed four years after the last treatment demonstrated that no complications or further recurrence occurred. Multiple sessions of diode laser application can be a safe, effective and minimally-invasive treatment for oral mucosa vascular malformations, even if characterized by high flow.

A retrospective study on the incidence of medication-related osteonecrosis of the jaws (MRONJ) associated with different preventive dental care modalities.

PURPOSE: To assess the efficacy of different preventive dental visits and treatments in reducing the risk of medication-related osteonecrosis of the jaws (MRONJ). METHODS: In this retrospective study, patients diagnosed with MRONJ were divided into 5 groups based on available data: no preventive dental visits (group 0); dental visits and compliance with recommended treatments, at the university hospital's dental clinic (group 1) or maxillofacial surgery unit (group 2), or at a private dentist's (group 3); dental visits at one of the above and noncompliance with proposed treatments (group 4); patients judged eligible by the oncologist on panoramic radiography (group 5). Patients were classified on severity of MRONJ according to the Italian SIPMO/SICMF 2.0 staging system. A descriptive analysis was performed on the results. Fisher's exact test was applied (p < 0.05). RESULTS: Ninety-three patients diagnosed with MRONJ were considered for the study, but 22 were excluded due to a lack of data, leaving a sample of 71 cases. MRONJ staging was only 0 for some patients (26.92%) in group 0. In all groups, the majority of patients had stage 2 MRONJ. The proportions of cases in stage 3 were 7.69% in group 0, 18.18% in group 3, and 43.48% in group 5. Groups 0 and 3 were somewhat similar as regard MRONJ staging. Most patients in group 5 had MRONJ stage 2 or 3. No statistically significant differences emerged between the groups. CONCLUSIONS: Preventive dental care can reduce the risk of MRONJ providing patients comply with the specialist's recommendations.

Biofunctionalization of bioactive ceramic scaffolds to increase the cell response for bone regeneration.

Biofunctionalization was investigated for polymers and metals considering their scarce integration ability. On the contrary few studies dealt with ceramic biofunctionalization because the bioactive and bioresorbable surfaces of ceramics are able to positively interact with biological environment. In this study the cell-response improvement on biofunctionalized wollastonite and diopside-based scaffolds was demonstrated. The ceramics were first obtained by heat treatment of a silicone embedding reactive oxide fillers and then biofunctionalized with adhesive peptides mapped on vitronectin. The most promisingin vitroresults, in terms of h-osteoblast proliferation and bone-related gene expression, were reached anchoring selectively a peptide stable toward proteolytic degradation induced by serum-enriched medium. Inin vivoassays the anchoring of this protease-stable adhesive peptide was combined with self-assembling peptides, for increasing cell viability and angiogenesis. The results demonstrated external and internal cell colonization of biofunctionalized scaffolds with formation of new blood vessels (neoangiogenesis) and stimulation of ectopic mineralization.

Dental care during COVID-19 pandemic: Follow-up survey of experts' opinion.

OBJECTIVES: The purpose of the present survey is to give an update of European experts' opinion on infection control and prevention in dentistry during second wave of pandemic. The secondary aim was to analyze how experts' opinion changed in the light of the new scientific evidence since the first wave. MATERIAL & METHODS: An anonymous online 14-item questionnaire was sent to a total of 27 leading academic experts in Oral (and Maxillofacial) Surgery from different European countries, who had completed a previous survey in April-May 2020. The questionnaire covered the topics of dental setting safety, personal protective equipment (PPE), and patient-related measures to minimize transmission risk. Data collection took place in November-February 2020/21. RESULTS: 26 experts participated in the follow-up survey. The overall transmission risk in dental settings was scored significantly lower compared to the initial survey (p < .05), though the risk associated with aerosol-generating procedures (AGP) was still considered to be high. Maximum PPE was less frequently recommended for non-AGP (p < .05), whereas the majority of experts still recommended FFP2/FFP3 masks (80.8%), face shields or goggles (88.5%), gowns (61.5%), and caps (57.7%) for AGP. Most of the experts also found mouth rinse relevant (73.1%) and reported to be using it prior to treatment (76.9%). No uniform opinion was found regarding the relevance of COVID-19 testing of staff and patients. CONCLUSION: With the continuation of dental care provision, transmission risk has been scored lower compared to the first wave of pandemic. However, high risk is still assumed for AGP, and maximum PPE remained advised for the respective treatments.

Implantoplasty: Carbide burs vs diamond sonic tips. An in vitro study.

OBJECTIVES: Implantoplasty (IP) is a treatment option for peri-implantitis. Mechanical concerns were raised on fracture resistance of implants subjected to this procedure. This study aimed to compare two methods of IP in terms of implant wear and fracture resistance, and of surface topography. MATERIAL AND METHODS: Eighteen cylindrical screw-shaped dental implants (4 mm diameter, 13 mm length) with an external hexagonal connection were used. IP was performed on the first 6-mm implant surface with a sequence of burs or diamond sonic tips, both followed by an Arkansas finishing. IP duration and implant weight variation were recorded. Micro-computed tomography (micro-CT) was used to evaluate material loss. Implant fracture resistance was assessed by static compression test. Surface topography analysis was performed with a stylus profilometer. Scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) was applied for implant surface morphology and elemental characterization. RESULTS: Micro-CT showed less material loss in sonic compared to burs. No statistically significant difference was found between the mean fracture resistance values reached in bur and sonic, both followed by Arkansas, and with respect to control. IP performed with burs led to a smoother surface compared to sonic. Equivalent final surface roughness was found after Arkansas in both IP procedures. SEM-EDS showed a deburring effect associated to sonic and revealed carbon and aluminum peaks attributable to contamination with sonic diamond tips and Arkansas bur, respectively. CONCLUSIONS: IP with sonic diamond tips was found to be more conservative in terms of structure loss. This could have a clinical relevance in case of narrow-diameter implants.

CT-based dentulous mandibular alveolar ridge measurements as predictors of crown-to-implant ratio for short and extra short dental implants.

The purpose was to predict the crown-to-implant ratio variation in the edentulous posterior mandibles rehabilitated with short dental implants. Hence, vertical and horizontal dimensions of dentulous posterior mandibles in a sample of 18- to 25-year-olds were measured, and correlations of these dimensions with sex and site were investigated. Mandibular computed tomography scans from 100 subjects were considered. Vertical and horizontal bone and tooth measurements were taken at the sites of the second premolar (PM), and the mesial and distal roots of the first and second molars (M1m, M1d, M2m and M2d, respectively). A hypothetical crown-to-implant ratio (C/I R) was calculated assuming the insertion of short and extra short implants (5, 6 or 7 mm), at 1.5 mm from the inferior alveolar canal, maintaining the position of the existing occlusal plane. All vertical bone dimensions decreased from the PM to the M2d. Width measurements increased from the mesial (PM) to the distal sites (M1m, M1d, M2m and M2d). Males had significantly greater vertical and horizontal measurements than females at all sites. The mean C/I R was higher than 2 for all sizes of implant. The C/I R was lower for the second molar than for the second premolar, while it was similar for the first molar and the second premolar. Males had a higher C/I R than females. Computed tomography can be used to study the anatomical features of alveolar bone, and to predict some clinical aspects of prosthetic rehabilitation with implants, such as the crown-to-implant ratio in conditions of serious bone atrophy.

Dental care during COVID-19 pandemic: Survey of experts' opinion.

OBJECTIVES: The current COVID-19 outbreak in conjunction with the need to provide safe dental treatments and the limited knowledge on the efficacy of protective measures has posed dentists into a challenging situation. Therefore, the present article aimed at collecting experiences and recommendations of frontline clinical experts on critical aspects of dental treatment provision during pandemic. MATERIAL & METHODS: From a total of 32 European countries, one leading academic expert in Oral and Maxillofacial Surgery or Oral Surgery per country was asked to participate in an anonymous online 10-item survey on COVID-19 covering the topics of safety of dental settings, personal protective equipment (PPE), and patient-related measures to reduce transmission risk. Data collection took place from April 12th to May 22nd, 2020. RESULTS: A total of 27 experts from different European countries completed the survey. The transmission risk of SARS-CoV-2 in dental settings for aerosol-generating procedures was considered high by all experts except two. For aerosol-free and aerosol-generating procedures, more than 80% of the experts recommended face protection and caps for every single treatment. For aerosol-generating procedures, additional measures (FFP2/FFP3 masks and gowns) were suggested by the vast majority of the experts. To reduce transmission risk, all experts recommended limiting aerosol-generating procedures and reducing the number of patients in waiting areas as well as hand hygiene for the patients. CONCLUSION: The limitation of aerosol-generating procedures along with the usage of adequate personal protection equipment was considered to be crucial to protect dental healthcare providers and patients, thus reducing the transmission risk of COVID-19.