RESUMEN
OBJECTIVES: To measure the tooth whitening effects delivered immediately after brushing with silica-based toothpastes containing blue covarine in vitro and in vivo. METHODS: Salivary pellicle coated human extracted teeth were brushed with either a slurry of a toothpaste containing blue covarine (BC), a formulation containing an increased level of blue covarine (BC+) or a negative control toothpaste containing no blue covarine. The colour of the specimens were measured in vitro using either a Minolta chromameter or a VITA Easyshade spectrophotometer, before and after brushing and changes in CIELAB values and tooth Whiteness Index (WIO) values calculated. In a double-blind cross-over clinical study, subjects brushed with either BC or BC+ toothpaste and tooth colour changes were measured with a digital image analysis system. RESULTS: The in vitro studies demonstrated that toothpastes containing blue covarine gave a significantly (p<0.05) greater change in b* and WIO values than the negative control toothpaste; the BC+ toothpaste gave a significantly greater increase in b* and WIO values than the BC toothpaste, and BC+ gave a significant increase in shade change versus the negative control. Clinical results showed that BC and BC+ gave a significant reduction in b* (p<0.0001) and increase in WIO (p<0.0001) from baseline indicating significant tooth whitening had occurred. The parameter changes were significantly greater when brushing with the BC+ toothpaste than with the BC toothpaste (WIO p=0.006; b* p=0.013). CONCLUSIONS: Toothpastes containing blue covarine gave a statistically significant reduction in tooth yellowness and improvement in tooth whiteness immediately after brushing in both in vitro and clinical studies. In addition, the higher concentration blue covarine toothpaste gave statistically significant greater tooth whitening benefits than the lower concentration blue covarine toothpaste. CLINICAL SIGNIFICANCE: The silica-based toothpastes containing blue covarine evaluated in the current study gave tooth whitening benefits immediately after one brush.
Asunto(s)
Colorantes/farmacología , Isoindoles/farmacología , Metaloporfirinas/farmacología , Blanqueamiento de Dientes/métodos , Diente/anatomía & histología , Pastas de Dientes/farmacología , Adolescente , Adulto , Anciano , Color , Estudios Cruzados , Película Dental , Método Doble Ciego , Femenino , Humanos , Masculino , Persona de Mediana Edad , Dióxido de Silicio , Espectrofotometría , Decoloración de Dientes/tratamiento farmacológico , Cepillado Dental , Resultado del Tratamiento , Adulto JovenRESUMEN
OBJECTIVE: The associations seen clinically between variations in tooth number, size and shape reflect the repetitive genetic interactions occurring between the epithelium and mesenchyme during the initiation and morphogenetic stages of the Complex Adaptive System that is dental development. The aim of this study was to investigate the clinical relationship further by comparing multiple crown parameters, including cusp numbers, between patients with mild hypodontia and controls in a Romanian sample. DESIGN: Digital images of dental casts of the permanent dentition from 28 patients with mild hypodontia and 28 controls were used. Measurements from the vestibular and occlusal surfaces were performed using a 2D image analysis method and cusps, including the Carabelli trait, were counted. Two-way analysis of variance was performed. RESULTS: The dimensions of the mild hypodontia group had smaller values than the controls, with many measurements being significantly different (significance values varied from p=0.049 to p=0.001). The most affected regions were the upper and lower anterior region in both sexes. Mesio-distal, bucco-lingual and occlusal area and perimeter dimensions were affected. Females from the hypodontia group had significantly less tricuspidated lower premolars when compared with the control group. Carabelli cusps were present in the hypodontia group less frequently, the difference being highly significant (p=0.0002) in women. CONCLUSIONS: The hypodontia patients presented with reduced crown dimensions and shape compared with controls. This is the first published study to demonstrate smaller cusp numbers in patients with hypodontia than in controls. The findings are compatible with a model of dental development as a Complex Adaptive System incorporating associations between tooth number, size and shape.
Asunto(s)
Anodoncia/epidemiología , Corona del Diente/anomalías , Adolescente , Adulto , Factores de Edad , Estudios de Casos y Controles , Femenino , Humanos , Procesamiento de Imagen Asistido por Computador , Masculino , Modelos Dentales , Odontometría , Fotograbar/instrumentación , Radiografía Panorámica , Reproducibilidad de los Resultados , Rumanía/epidemiología , Factores SexualesRESUMEN
InterMine is a data integration warehouse and analysis software system developed for large and complex biological data sets. Designed for integrative analysis, it can be accessed through a user-friendly web interface. For bioinformaticians, extensive web services as well as programming interfaces for most common scripting languages support access to all features. The web interface includes a useful identifier look-up system, and both simple and sophisticated search options. Interactive results tables enable exploration, and data can be filtered, summarized, and browsed. A set of graphical analysis tools provide a rich environment for data exploration including statistical enrichment of sets of genes or other entities. InterMine databases have been developed for the major model organisms, budding yeast, nematode worm, fruit fly, zebrafish, mouse, and rat together with a newly developed human database. Here, we describe how this has facilitated interoperation and development of cross-organism analysis tools and reports. InterMine as a data exploration and analysis tool is also described. All the InterMine-based systems described in this article are resources freely available to the scientific community.
Asunto(s)
Bases de Datos Factuales , Programas Informáticos , Animales , Biología Computacional/métodos , Bases de Datos Genéticas , Genómica , Humanos , Internet , Integración de Sistemas , Interfaz Usuario-ComputadorRESUMEN
Common metabolic and endocrine diseases such as diabetes affect millions of people worldwide and have a major health impact, frequently leading to complications and mortality. In a search for better prevention and treatment, there is ongoing research into the underlying molecular and genetic bases of these complex human diseases, as well as into the links with risk factors such as obesity. Although an increasing number of relevant genomic and proteomic data sets have become available, the quantity and diversity of the data make their efficient exploitation challenging. Here, we present metabolicMine, a data warehouse with a specific focus on the genomics, genetics and proteomics of common metabolic diseases. Developed in collaboration with leading UK metabolic disease groups, metabolicMine integrates data sets from a range of experiments and model organisms alongside tools for exploring them. The current version brings together information covering genes, proteins, orthologues, interactions, gene expression, pathways, ontologies, diseases, genome-wide association studies and single nucleotide polymorphisms. Although the emphasis is on human data, key data sets from mouse and rat are included. These are complemented by interoperation with the RatMine rat genomics database, with a corresponding mouse version under development by the Mouse Genome Informatics (MGI) group. The web interface contains a number of features including keyword search, a library of Search Forms, the QueryBuilder and list analysis tools. This provides researchers with many different ways to analyse, view and flexibly export data. Programming interfaces and automatic code generation in several languages are supported, and many of the features of the web interface are available through web services. The combination of diverse data sets integrated with analysis tools and a powerful query system makes metabolicMine a valuable research resource. The web interface makes it accessible to first-time users, whereas the Application Programming Interface (API) and web services provide convenient data access and tools for bioinformaticians. metabolicMine is freely available online at http://www.metabolicmine.org Database URL: http://www.metabolicmine.org.
Asunto(s)
Bases de Datos Genéticas , Bases de Datos de Proteínas , Enfermedades Metabólicas/genética , Enfermedades Metabólicas/metabolismo , Proteómica , Investigación , Animales , Estudios de Asociación Genética , Humanos , Internet , Ratones , RatasRESUMEN
Model organisms are widely used for understanding basic biology, and have significantly contributed to the study of human disease. In recent years, genomic analysis has provided extensive evidence of widespread conservation of gene sequence and function amongst eukaryotes, allowing insights from model organisms to help decipher gene function in a wider range of species. The InterMOD consortium is developing an infrastructure based around the InterMine data warehouse system to integrate genomic and functional data from a number of key model organisms, leading the way to improved cross-species research. So far including budding yeast, nematode worm, fruit fly, zebrafish, rat and mouse, the project has set up data warehouses, synchronized data models, and created analysis tools and links between data from different species. The project unites a number of major model organism databases, improving both the consistency and accessibility of comparative research, to the benefit of the wider scientific community.
Asunto(s)
Genoma , Modelos Genéticos , Animales , Bases de Datos Factuales , Bases de Datos Genéticas , Genómica/métodosRESUMEN
SUMMARY: InterMine is an open-source data warehouse system that facilitates the building of databases with complex data integration requirements and a need for a fast customizable query facility. Using InterMine, large biological databases can be created from a range of heterogeneous data sources, and the extensible data model allows for easy integration of new data types. The analysis tools include a flexible query builder, genomic region search and a library of 'widgets' performing various statistical analyses. The results can be exported in many commonly used formats. InterMine is a fully extensible framework where developers can add new tools and functionality. Additionally, there is a comprehensive set of web services, for which client libraries are provided in five commonly used programming languages. AVAILABILITY: Freely available from http://www.intermine.org under the LGPL license. CONTACT: g.micklem@gen.cam.ac.uk SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.
Asunto(s)
Biología Computacional/métodos , Sistemas de Administración de Bases de Datos , Bases de Datos Factuales , Algoritmos , Minería de Datos , Genómica , Internet , Lenguajes de ProgramaciónRESUMEN
In an effort to comprehensively characterize the functional elements within the genomes of the important model organisms Drosophila melanogaster and Caenorhabditis elegans, the NHGRI model organism Encyclopaedia of DNA Elements (modENCODE) consortium has generated an enormous library of genomic data along with detailed, structured information on all aspects of the experiments. The modMine database (http://intermine.modencode.org) described here has been built by the modENCODE Data Coordination Center to allow the broader research community to (i) search for and download data sets of interest among the thousands generated by modENCODE; (ii) access the data in an integrated form together with non-modENCODE data sets; and (iii) facilitate fine-grained analysis of the above data. The sophisticated search features are possible because of the collection of extensive experimental metadata by the consortium. Interfaces are provided to allow both biologists and bioinformaticians to exploit these rich modENCODE data sets now available via modMine.
Asunto(s)
Caenorhabditis elegans/genética , Bases de Datos Genéticas , Drosophila melanogaster/genética , Animales , Expresión Génica , Genoma de los Helmintos , Genoma de los Insectos , Genómica , Internet , Interfaz Usuario-ComputadorRESUMEN
BACKGROUND: Three-dimensional measurement of dental morphology is providing new variables and shape information not available previously, and the reliability of these data has proved to be substantial. Accurate superimposition of 2D and 3D data-sets has several applications in dental research when making comparisons of similar structures. For example, two data-sets of the same object can be superimposed to highlight differences apparent in limited region(s) of the tooth crown. When significant regions represented by the two data-sets are identical, registration of the images can be achieved by standard superimposition methods. However, for comparisons of crown morphologies between monozygotic and dizygotic co-twins, the data sets are similar but not identical so a new approach to superimposition has been developed. AIM: To develop a non 'best fit' (Synetic) method for the 3D superimposition of non-similar objects that forms one comparable interface providing enhanced methodology for the analysis of differences within the dentition of twins. METHOD: A minimised least-squares registration approach is followed by diffusion based registration to provide global minimisation between points that is not based on a best fit algorithm. This process is linear and therefore the method ensures uniqueness of the superimposition. RESULTS: Initial results indicate a reliable method producing only one output as opposed to best fit approaches that may generate a different output each time. CONCLUSION: Diffusion-based registration offers a more reliable approach to superimposing non-identical objects, such as the tooth crowns of monozygotic co-twins, than conventional best-fit methods.
Asunto(s)
Procesamiento de Imagen Asistido por Computador/métodos , Imagenología Tridimensional , Odontometría/métodos , Diente/anatomía & histología , Estudios en Gemelos como Asunto/métodos , Algoritmos , Humanos , Análisis de los Mínimos Cuadrados , Modelos Biológicos , Odontometría/instrumentación , Reproducibilidad de los Resultados , Corona del Diente/anatomía & histología , Estudios en Gemelos como Asunto/instrumentaciónRESUMEN
AIMS: Due to instrument imprecision and human inconsistencies, measurements are not free of error. Technical error of measurement (TEM) is the variability encountered between dimensions when the same specimens are measured at multiple sessions. A goal of a data collection regimen is to minimise TEM. The few studies that actually quantify TEM, regardless of discipline, report that it is substantial and can affect results and inferences. This paper reviews some statistical approaches for identifying and controlling TEM. Statistically, TEM is part of the residual ('unexplained') variance in a statistical test, so accounting for TEM, which requires repeated measurements, enhances the chances of finding a statistically significant difference if one exists. METHODS: The aim of this paper was to review and discuss common statistical designs relating to types of error and statistical approaches to error accountability. This paper addresses issues of landmark location, validity, technical and systematic error, analysis of variance, scaled measures and correlation coefficients in order to guide the reader towards correct identification of true experimental differences. CONCLUSIONS: Researchers commonly infer characteristics about populations from comparatively restricted study samples. Most inferences are statistical and, aside from concerns about adequate accounting for known sources of variation with the research design, an important source of variability is measurement error. Variability in locating landmarks that define variables is obvious in odontometrics, cephalometrics and anthropometry, but the same concerns about measurement accuracy and precision extend to all disciplines. With increasing accessibility to computer-assisted methods of data collection, the ease of incorporating repeated measures into statistical designs has improved. Accounting for this technical source of variation increases the chance of finding biologically true differences when they exist.
Asunto(s)
Recolección de Datos/normas , Modelos Estadísticos , Odontometría/normas , Diente/anatomía & histología , Humanos , Variaciones Dependientes del Observador , Reproducibilidad de los Resultados , Proyectos de InvestigaciónRESUMEN
OBJECTIVE: To assess the reproducibility of a mobile non-contact camera-based digital imaging system (DIS) for measuring tooth colour under in vitro and in vivo conditions. METHODS: One in vitro and two in vivo studies were performed using a mobile non-contact camera-based digital imaging system. In vitro study: two operators used the DIS to image 10 dry tooth specimens in a randomised order on three occasions. In vivo study 1:25 subjects with two natural, normally aligned, upper central incisors had their teeth imaged using the DIS on four consecutive days by one operator to measure day-to-day variability. On one of the four test days, duplicate images were collected by three different operators to measure inter- and intra-operator variability. In vivo study 2:11 subjects with two natural, normally aligned, upper central incisors had their teeth imaged using the DIS twice daily over three days within the same week to assess day-to-day variability. Three operators collected images from subjects in a randomised order to measure inter- and intra-operator variability. RESULTS: Subject-to-subject variability was the largest source of variation within the data. Pairwise correlations and concordance coefficients were > 0.7 for each operator, demonstrating good precision and excellent operator agreement in each of the studies. Intraclass correlation coefficients (ICCs) for each operator indicate that day-to-day reliability was good to excellent, where all ICC's where > 0.75 for each operator. CONCLUSION: The mobile non-contact camera-based digital imaging system was shown to be a reproducible means of measuring tooth colour in both in vitro and in vivo experiments.
Asunto(s)
Procesamiento de Imagen Asistido por Computador/instrumentación , Fotografía Dental/instrumentación , Diente/anatomía & histología , Adolescente , Adulto , Anciano , Color , Colorimetría/instrumentación , Diente Canino/anatomía & histología , Diseño de Equipo , Femenino , Humanos , Incisivo/anatomía & histología , Masculino , Persona de Mediana Edad , Variaciones Dependientes del Observador , Reproducibilidad de los Resultados , Factores de TiempoRESUMEN
Enamel hypoplasia is a quantitative defect of enamel thickness. Methods previously used for its measurement have limitations in clinical studies. The aim of this study was to investigate new methods of measurement using image analysis. Lesions on 8 teeth affected by enamel hypoplasia were quantified from study models and impression surfaces using an image-analysis system. The measurements made included lesion area and tooth surface area; from these the proportion of tooth surface area affected was calculated. For comparison, manual measurement was performed on impression surfaces and study models, using digital callipers. Images were also acquired of lesions on 12 exfoliated teeth, and the lesion area and total tooth area were calculated. For assessment of intra-operator reliability, the +/-repeatability coefficient was calculated. Measurement of the surface of lesions direct from the exfoliated teeth gave the best results overall, followed by direct image analysis of the silicone impression.
Asunto(s)
Hipoplasia del Esmalte Dental/clasificación , Esmalte Dental/patología , Hipoplasia del Esmalte Dental/patología , Técnica de Impresión Dental , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Modelos Dentales , Variaciones Dependientes del Observador , Odontometría/métodos , Fotografía Dental/métodos , Reproducibilidad de los ResultadosRESUMEN
OBJECTIVE: Fluctuating dental asymmetry as an indication of the effect of environmental insults during tooth development requires further investigation. The aim of this study was to assess asymmetry in tooth crown dimension for the increased range of parameters possible with image analysis compared to previous manual measurements. METHODS: Study models of 25 male and 25 female white Caucasian subjects were measured from buccal and occlusal views to determine mesio-distal, bucco-lingual, occluso-gingival and tooth surface area dimensions using image analysis. Method errors were assessed by the repeatability coefficient RC and asymmetry assessed calculating intra-class correlation coefficients between pairs of antimere teeth. RESULTS: The method errors calculated using RC were small. There was a high degree of symmetry with correlation coefficients with a range of 0.67-0.96 for linear measurements and 0.80-0.97 for tooth surface areas. No significant differences were found between the genders or between the upper and lower jaws. Asymmetry tended to follow a pattern in morphogenic tooth fields with the mesial tooth showing greater symmetry than the more distal. There were differences in the degree of symmetry among the variables measured with the mesio-distal dimension showing the greatest symmetry. CONCLUSIONS: This new technique was reliable and readily applicable, providing also a greater range of measurements. While the asymmetry generally followed a similar pattern to earlier manual studies, there were variations in the degree of symmetry between different parameters.