RESUMEN
Electrodeposition is a versatile method for synthesizing nanostructured films, but controlling the morphology of films containing two or more elements requires a detailed understanding of the deposition process. We used liquid cell transmission electron microscopy to follow the electrodeposition of PtNi nanoparticle films on a carbon electrode during cyclic voltammetry. These in situ observations show that the film thickness increases with each cycle, and by the fourth cycle, branched and porous structures could be deposited. Synchrotron studies using in situ transmission X-ray microscopy further revealed that Ni was deposited in the oxide phase. Ex situ studies of bulk electrodeposited PtNi nanoparticle films indicated the number of cycles and the scanning rate were the most influential parameters, resulting in a different thickness, a different homogeneity, a different nanoparticle size, and a different surface structure, while the precursor concentration did not have a significant influence. By varying the potential range, we were able to obtain films with different elemental compositions.
RESUMEN
The ammonia synthesis process produces millions of tons of ammonia annually needed for the production of fertilisers, making it the second most produced chemical worldwide. Although this process has been optimised extensively, it still consumes large amounts of energy (around 2% of global energy consumption), making it essential to improve its efficiency. To accelerate this improvement, research on catalysts is necessary. Here, we studied the role of potassium in ammonia synthesis on cobalt catalysts and found that it was detrimental to the catalytic activity. It was shown that, regardless of the amount of introduced K, the activity of the K-modified catalysts was much lower than that of the undoped catalyst. K was found to be in the form of oxide; however, it was unstable and reducible to metallic K, which easily volatilised from the catalyst surface under activation conditions. In addition, potassium doping resulted in the sintering of the catalyst, the decrease in the surface basicity, and contributed to the loss of the active sites, mainly due to the coverage of Co surface by residual K species.
RESUMEN
The loading of graphitic carbon nitride (gCN) with transition metals has received significant attention for efficient light-driven catalysis. However, the contribution of the loaded metals to enhanced performance remains unclear. In this study, Cu is loaded onto gCN to understand how photocatalytic activity is regulated by the loaded metals. Loading gCN with 3 wt% of Cu increases the electron population by 8.1 and 4.6 times under UV (λ < 370 nm) and visible light (390 < λ < 740 nm), respectively. This sample shows nearly 100% selectivity for oxidizing benzyl alcohol to benzaldehyde and a high yield-to-power ratio, reaching 0.35 mmol g-1 h-1 W-1. The loaded Cu species exist as single atoms with a +1-oxidation state. Each Cu+ cation is coordinated to two (at 3 wt% Cu) or four (at 6 wt% Cu) N atoms within the cavity of the gCN framework. Doubling the Cu loading results in a smaller electron population and coordinatively more saturated Cu+ cations, making it catalytically less reactive. Ab initio molecular dynamics simulations show that Cu+ cations produce filled mid-gap states above the valence band, which function as hole traps and hence oxidation centers. The Cu+ cation and the neighboring N atoms are electron-depletion and electron-accumulation sites due to Cu â N electron transfer, making it highly reactive for oxidative transformations via the hole transfer pathway. The role of Cu as a hole-transfer site updates the received understanding that surface-loaded Cu serves as an electron-accumulation site. A strong correlation is observed between the electron population at steady-state and the product yield, indicating that it could serve as a promising performance indicator for the design of future photocatalysts.
RESUMEN
Surface terminations profoundly influence the intrinsic properties of MXenes, but existing terminations are limited to monoatomic layers or simple groups, showing disordered arrangements and inferior stability. Here we present the synthesis of MXenes with triatomic-layer borate polyanion terminations (OBO terminations) through a flux-assisted eutectic molten etching approach. During the synthesis, Lewis acidic salts act as the etching agent to obtain the MXene backbone, while borax generates BO2- species, which cap the MXene surface with an O-B-O configuration. In contrast to conventional chlorine/oxygen-terminated Nb2C with localized charge transport, OBO-terminated Nb2C features band transport described by the Drude model, exhibiting a 15-fold increase in electrical conductivity and a 10-fold improvement in charge mobility at the d.c. limit. This transition is attributed to surface ordering that effectively mitigates charge carrier backscattering and trapping. Additionally, OBO terminations provide Ti3C2 MXene with substantially enriched Li+-hosting sites and thereby a large charge-storage capacity of 420 mAh g-1. Our findings illustrate the potential of intricate termination configurations in MXenes and their applications for (opto)electronics and energy storage.
RESUMEN
Personalized medicine is a new approach to modern oncology. Here, to facilitate the application of extracellular vesicles (EVs) derived from lung cancer cells as potent advanced therapy medicinal products in lung cancer, the EV membrane was functionalized with a specific ligand for targeting purposes. In this role, the most effective heptapeptide in binding to lung cancer cells (PTHTRWA) was used. The functionalization process of EV surface was performed through the C- or N-terminal end of the heptapeptide. To prove the activity of the EVs functionalized with PTHTRWA, both a model of lipid membrane mimicking normal and cancerous cell membranes as well as human adenocarcinomic alveolar basal epithelial cells (A549) and human normal bronchial epithelial cells (BEAS-2B) have been exposed to these bioconstructs. Magnetic resonance imaging (MRI) showed that the as-bioengineered PTHTRWA-EVs loaded with superparamagnetic iron oxide nanoparticle (SPIO) cargos reach the growing tumor when dosed intravenously in NUDE Balb/c mice bearing A549 cancer. Molecular dynamics (MD) in silico studies elucidated a high affinity of the synthesized peptide to the α5ß1 integrin. Preclinical safety assays did not evidence any cytotoxic or genotoxic effects of the PTHTRWA-bioengineered EVs.
Asunto(s)
Vesículas Extracelulares , Neoplasias Pulmonares , Ratones Endogámicos BALB C , Ratones Desnudos , Humanos , Neoplasias Pulmonares/patología , Neoplasias Pulmonares/metabolismo , Vesículas Extracelulares/química , Vesículas Extracelulares/metabolismo , Animales , Ratones , Células A549 , Nanopartículas Magnéticas de Óxido de Hierro/químicaRESUMEN
Cytotoxic and genotoxic effects of novel mPEG-silane coated iron(III) oxide nanoparticles doped with magnesium (Mg0.1-γ-Fe2O3(mPEG-silane)0.5) have been investigated on human adenocarcinomic alveolar basal epithelial (A549) and human normal bronchial epithelial (BEAS-2B) cells. In the studies several molecular and cellular targets addressing to cell membrane, cytoplasm organelles and nucleus components were served as toxicological endpoints. The as-synthesized nanoparticles were found to be stable in the cell culture media and were examined for different concentration and exposure times. No cytotoxicity of the tested nanoparticles was found although these nanoparticles slightly increased reactive oxygen species in both cell types studied. Mg0.1-γ-Fe2O3(mPEG-silane)0.5 nanoparticles did not produce any DNA strand breaks and oxidative DNA damages in A549 and BEAS-2B cells. Different concentration of Mg0.1-γ-Fe2O3(mPEG-silane)0.5 nanoparticles and different incubation time did not affect cell migration. The lung cancer cells' uptake of the nanoparticles was more effective than in normal lung cells. Altogether, the results evidence that mPEG-silane coated iron(III) oxide nanoparticles doped with magnesium do not elucidate any deleterious effects on human normal and cancerous lung cells despite cellular uptake of these nanoparticles. Therefore, it seems reasonable to conclude that these novel biocompatible nanoparticles are promising candidates for further development towards medical applications.
Asunto(s)
Daño del ADN , Pulmón , Magnesio , Polietilenglicoles , Silanos , Humanos , Silanos/toxicidad , Silanos/química , Polietilenglicoles/toxicidad , Polietilenglicoles/química , Magnesio/química , Pulmón/efectos de los fármacos , Pulmón/metabolismo , Pulmón/citología , Neoplasias Pulmonares/metabolismo , Especies Reactivas de Oxígeno/metabolismo , Supervivencia Celular/efectos de los fármacos , Línea Celular , Compuestos Férricos/toxicidad , Compuestos Férricos/química , Movimiento Celular/efectos de los fármacos , Nanopartículas Magnéticas de Óxido de Hierro/toxicidad , Nanopartículas Magnéticas de Óxido de Hierro/química , Línea Celular Tumoral , Células A549RESUMEN
In this research, we developed boron-rich nanoparticles that can be used for boron neutron capture therapy as potential carriers for boron delivery to cancerous tissues. Functionalized carbonated boron nitride nanostructures (CBNs) were successfully synthesized in self-propagating combustion waves in mixtures of high-nitrogen explosives and boron compounds. The products' composition, morphology, and structural features were investigated using Fourier transform infrared spectroscopy, powder X-ray diffraction, low-temperature nitrogen sorption analysis, thermogravimetric analysis, high-resolution scanning electron microscopy, and high-resolution transmission electron microscopy. The extreme conditions prevailing in combustion waves favor the formation of nanosized CBN hollow grains with highly disordered structures that are properly functionalized on the surface and inside the particles. Therefore, they are characterized by high porosity and good dispersibility in water, which are necessary for medical applications. During biological tests, a concentration-dependent effect of the obtained boron nitride preparations on the viability of normal and neoplastic cells was demonstrated. Moreover, the assessment of the degree of binding of fluorescently labeled nanoparticles to selected cells confirmed the relationships between the cell types and the concentration of the preparation at different incubation time points.
RESUMEN
Spray-dried niobium oxide coated with chitosan-activated carbon (NIC) was synthesized and used to remove doxorubicin hydrochloride and crystal violet from aqueous solutions under different parameters such as solution pH (2, 4, 6, and 8), contact time (1 to 9 h), initial concentration (20 to 200 mg L-1), and competing ions (0.1 M of CaCl2 and NaCl). The addition of 5 % chitosan-activated carbon to the matrix of niobium oxide slightly increased the specific surface area from 26 to 30 m2 g-1, with the introduction of a carboxylic functional group. This led to an increase in the amount of adsorbed doxorubicin hydrochloride (DOH) from 30 to 44 mg g-1 and that of crystal violet (CV) from 15 to 32 mg g-1 from the initial respective 100 mg L-1 at pH 8. The data from the concentration study fitted into Liu isotherm having adsorption capacity of 128 and 57 mg g-1 for DOH and CV respectively, while pseudo first and second order are more suitable for adsorption kinetics. The additional functional groups on the IR spectrum of NIC after the adsorption of DOH and CV confirmed the interaction between NIC and the adsorbates' molecules. The mechanism of adsorption was supported by DFT calculations.
Asunto(s)
Quitosano , Doxorrubicina , Violeta de Genciana , Niobio , Quitosano/química , Doxorrubicina/química , Adsorción , Niobio/química , Violeta de Genciana/química , Concentración de Iones de Hidrógeno , Carbón Orgánico/química , Cinética , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/aislamiento & purificación , Teoría Funcional de la Densidad , Óxidos/química , Agua/química , Soluciones , Purificación del Agua/métodosRESUMEN
Extracellular vesicles (EVs) released from primary cell lines, originating from resected tissues during biopsies in patients with non-small cell lung cancer (NSCLC) revealing adenocarcinoma and squamous cell carcinoma subtypes, were examined for membrane proteomic fingerprints using a proximity barcoding assay. All the collected EVs expressed canonical tetraspanins (CD9, CD63, and CD81) highly coexpressed with molecules such as lysosome-associated membrane protein-1 (LAMP1-CD107a), sialomucin core protein 24 (CD164), Raph blood group (CD151), and integrins (ITGB1 and ITGA2). This representation of the protein molecules on the EV surface may provide valuable information on NSCLC subtypes and offer new diagnostic opportunities as next-generation biomarkers in personalized oncology.
RESUMEN
Electrospun nanofibers were used to support palladium nanocubes, resulting in a highly active, stable, and reusable catalyst. The system proposed herein offers significant advantages compared to catalysts in the form of nanoparticles suspension. The porous, solvent permeable structure of the nanofiber mat ensures uniform and stable time distribution of palladium nanoparticles; preventing coalescence and allowing multiple use of the catalyst. The proposed cross-linked poly(vinyl alcohol) nanofiber mat loaded with Pd nanocubes during the nanofiber preparation step is a macroscopic structure of intrinsically nanostructural character of the catalyst that can be easily transferred between different solutions without compromising its effectiveness in consecutive cycles. Thus, obtained system was characterized with high catalytic activity as tested on a model example of 4-nitrophenol (4-NP) reduction by NaBH4 to 4-aminophenol (4-AP). It is shown that loading nanofibers with Pd nanocubes during electrospinning resulted in a significantly more stable system compared to surface modification of obtained nanofibers with nanocube suspension.
RESUMEN
The cytotoxic effects of water-based ferrofluids composed of iron oxide nanoparticles, including magnetite (Fe3O4) and maghemite (γ-Fe2O3), ranging from 15 to 100 nm, were examined on various lung cancer cells including adenocarcinomic human alveolar basal epithelial cells (A549), nonsmall lung squamous cell carcinoma (H1703), small cell lung cancer cells (DMS 114), and normal bronchial epithelial cells (BEAS-2B). The cytotoxic effect was evaluated both with and without exposure to an alternating magnetic field (AMF). The studies revealed that neither AMF nor iron oxide nanoparticles when tested individually, produced cytotoxic effects on either cancerous or noncancerous cells. However, when applied together, they led to a significant decrease in cell viability and proliferative capacity due to the enhanced effects of magnetic fluid hyperthermia (MFH). The most pronounced effects were found for maghemite (<50 nm) when subjected to an AMF. Notably, A549 cells exhibited the highest resistance to the proposed hyperthermia treatment. BEAS-2B cells demonstrated susceptibility to magnetized iron oxide nanoparticles, similar to the response observed in lung cancer cells. The studies provide evidence that MFH is a promising strategy as a standalone treatment for different types of lung cancer cells. Nevertheless, to prevent any MFH-triggered adverse effects on normal lung cells, targeted magnetic ferrofluids should be designed.
Asunto(s)
Antineoplásicos , Compuestos Férricos , Neoplasias Pulmonares , Nanopartículas de Magnetita , Humanos , Antineoplásicos/farmacología , Campos Magnéticos , Pulmón , Nanopartículas Magnéticas de Óxido de Hierro , Nanopartículas de Magnetita/toxicidad , Línea Celular TumoralRESUMEN
Understanding the relation between surface morphology during epitaxy of GaN:Si and its electrical properties is important from both the fundamental and application perspectives. This work evidences the formation of nanostars in highly doped GaN:Si layers with doping level ranging from 5 × 1019 to 1 × 1020 cm-3 grown by plasma-assisted molecular beam epitaxy (PAMBE). Nanostars are 50-nm-wide platelets arranged in six-fold symmetry around the [0001] axis and have different electrical properties from the surrounding layer. Nanostars are formed in highly doped GaN:Si layers due to the enhanced growth rate along the a-direction ⟨112Ì 0⟩. Then, the hexagonal-shaped growth spirals, typically observed in GaN grown on GaN/sapphire templates, develop distinct arms that extend in the a-direction ⟨112Ì 0⟩. The nanostar surface morphology is reflected in the inhomogeneity of electrical properties at the nanoscale as evidenced in this work. Complementary techniques such as electrochemical etching (ECE), atomic force microscopy (AFM), and scanning spreading resistance microscopy (SSRM) are used to link the morphology and conductivity variations across the surface. Additionally, transmission electron microscopy (TEM) studies with high spatial resolution composition mapping by energy-dispersive X-ray spectroscopy (EDX) confirmed about 10% lower incorporation of Si in the hillock arms than in the layer. However, the lower Si content in the nanostars cannot solely be responsible for the fact that they are not etched in ECE. The compensation mechanism in the nanostars observed in GaN:Si is discussed to be an additional contribution to the local decrease in conductivity at the nanoscale.
RESUMEN
Background: Modern medicine requires intensive research to find new diagnostic and therapeutic solutions. Recently, upconverting nanoparticles (UCNPs) doped with lanthanide ions have attracted significant attention. Methods: The efficient internalization of UCNPs by cells was confirmed, and their precise cellular localization was determined by electron microscopy and confocal studies. Results: UCNPs colocalized only with specific organelles, such as early endosomes, late endosomes and lysosomes. Furthermore, experiments with chemical inhibitors confirmed the involvement of endocytosis in UCNPs internalization and helped select several mechanisms involved in internalization. Exposure to selected UCNPs concentrations did not show significant cytotoxicity, induction of oxidative stress or ultrastructural changes in cells. Conclusion: This study suggests that UCNPs offer new diagnostic options for biomedical infrared imaging.
Asunto(s)
Elementos de la Serie de los Lantanoides , Nanopartículas , Distribución Tisular , Elementos de la Serie de los Lantanoides/química , Diagnóstico por Imagen , Nanopartículas/químicaRESUMEN
CO2 hydrogenation to methane is gaining increasing interest as one of the most promising ways to store intermittent renewable energy in the form of chemical fuels. Ni particles supported on CeO2 represent a highly efficient, stable and inexpensive catalyst for this reaction. Herein, Ni-doped CeO2 nanoparticles were tested for CO2 methanation showing an extremely high Ni mass-specific activity and CH4 selectivity. Operando characterization reveals that this performance is tightly associated with ionic Νi and Ce3+ surface sites, while formation of metallic Ni does not seem to considerably promote the reaction. Theoretical calculations confirmed the stability of interstitial ionic Ni sites on ceria surfaces and highlighted the role of Ce-O frustrated Lewis pair (FLP), Ni-O classical Lewis pair (CLP) and Ni-Ce pair sites to the activation of H2 and CO2 molecules. To a large extent, the theoretical predictions were validated by in situ spectroscopy under H2 and CO2 : H2 gaseous environments.
Asunto(s)
Dióxido de Carbono , Níquel , Gases , Hidrogenación , IonesRESUMEN
Magnetic fluid hyperthermia (MFH) is a promising therapeutic strategy that targets malignant tissues by heating to 40-43 °C using magnetic nanoparticles (MNPs) subjected to an alternating magnetic field (AMF). In this study, novel magnetic iron(III) oxide nanoparticles doped with magnesium (Mg0.1-γ-Fe2O3(mPEG-silane)0.5) were synthesized, and their structural, chemical, and magnetic properties were analyzed using the following techniques: Fourier-transform infrared spectroscopy, Raman spectroscopy, vibrating magnetometer analysis, powder X-ray diffraction, inductively coupled plasma mass spectrometry, scanning electron microscopy, high-resolution transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The as-synthesized MNPs were used as water ferrofluids for MFH under an AMF in two calorimetric setups, namely phantom and lung cancer cell (A549) models. The as-synthesized MNPs were hexagonal or rhombohedral shaped, with an average size of 27 nm. They showed a typical soft ferromagnetic behavior based on the hysteresis profile, with a magnetic saturation of 70 emu g-1 and remnant magnetization of 1.6 emu g-1. In phantom studies, the ferrofluid (3.0 mg mL-1) exposed to an AMF (18.3 kA m-1, 110.1 kHz) heated up extremely quickly, reaching more than 90 °C in the first 10 min of magnetization. In cell studies, the ferrofluid (0.25 mg mL-1) under an AMF (16.7 kA m-1, 110.1 kHz) showed a slight increase in temperature within the first 12 min, reaching a peak of ca. 43-45 °C, which was stable up to the end of the AMF exposure (45 min). Under these conditions, a pronounced cytotoxic effect on the lung cancer cells was observed (viability ca. 15-20%). No such deleterious effects were observed when the cells were treated with MNPs only without an AMF. Specific absorption rate (SAR) measurements were performed using three mathematical approaches, namely the initial slope method, the corrected slope method, and the Box-Lucas method, which ranged from ca. 429 to 596 W g-1 for phantom and cell studies. Iron(III) oxide MNPs doped with magnesium were found to be candidates for MFH in lung cancer treatments.
Asunto(s)
Hipertermia Inducida , Neoplasias Pulmonares , Nanopartículas de Magnetita , Humanos , Magnesio , Nanopartículas de Magnetita/uso terapéutico , Nanopartículas de Magnetita/química , Hipertermia Inducida/métodos , Hierro , Óxidos , Neoplasias Pulmonares/terapia , Hipertermia , Campos MagnéticosRESUMEN
The synthesis of ammonia in the Haber-Bosch process produces millions of tons of ammonia annually needed for producing fertilisers required to feed the growing population. Although this process has been optimised extensively, it still accounts for about 2% of global energy consumption. It is, therefore, desirable to develop an efficient ammonia synthesis catalyst. Over the last decades, many attempts have been made to improve the ammonia synthesis catalyst efficiency under mild conditions. Here, we studied the effect of adding Ca and Ba to the cobalt ammonia synthesis catalyst. The combination of the different experimental results allows concluding that Ca served as an inactive additive, whereas Ba served as an electronic promoter. The Ca addition did not change the textural, structural, and chemisorptive properties of the Ca-doped Co catalyst. On the other hand, the Ba addition had a major effect on the nature of active Co sites. It contributed to the formation of new active sites for hydrogen and nitrogen adsorption and dissociation. Barium addition also contributed to the generation of new basic sites, particularly the strong ones. These unique characteristics were ascribed to the formation of Co(core)-BaO(shell) structures. It is likely that the donation of electrons from BaO to N2 via Co markedly promoted ammonia synthesis. This catalyst exhibited ammonia synthesis activity 4 times higher than that of the undoped Co catalyst and 2 times higher than that of the industrial Fe catalysts under identical conditions.
RESUMEN
Recent advances in nanomedicine have paved the way for developing targeted drug delivery systems. Nanoscale exosomes are present in almost every body fluid and represent a novel mechanism of intercellular communication. Because of their membrane origin, they easily fuse with cells, acting as a natural delivery system and maintaining the bioactivity and immunotolerance of cells. To develop a reconstitutable exosome-based drug candidate for clinical applications, quality assurance by preserving its physical and biological properties during storage is necessary. Therefore, this study aimed to determine the best storage conditions for exosomes derived from lung cancer cells (A549). This study established that the phosphate-buffered saline buffer enriched with 25 mM trehalose is an optimal cryoprotectant for A549-derived exosomes stored at -80°C. Under these conditions, the concentration, size distribution, zeta potential, and total cargo protein levels of the preserved exosomes remained constant.
Asunto(s)
Exosomas , Neoplasias Pulmonares , Humanos , Exosomas/metabolismo , Sistemas de Liberación de Medicamentos , Neoplasias Pulmonares/metabolismo , Crioprotectores , TrehalosaRESUMEN
Synthesis of ammonia from nitrogen and hydrogen is one of the largest manmade chemical processes, with annual production reaching 170 million tons. The Haber-Bosch process is the main industrial method for producing ammonia, which proceeds at high temperatures (400-600 °C) and pressures (20-40 MPa) using an iron-based catalyst. It is thus highly desirable to develop new catalysts with sufficient activity and stability under mild conditions. In this work, we report cobalt catalysts supported on magnesium-lanthanum mixed oxide with different Co loading amounts synthesised via a simple wet impregnation method. We have found a clear relationship between the ammonia synthesis rate and the Co loading amount. Specifically, the NH3 synthesis rate increased on increasing cobalt loading and reached a maximum at 40 wt% Co deposition. A further increase in Co loading did not change the activity significantly. Interestingly, the surface-specific activity (TOF) remained almost unchanged regardless of the Co loading amount in the catalysts. It revealed that the resultant ammonia synthesis rate over the studied catalysts did not depend on the size and structure of Co nanoparticles but strongly on the Co loading amount. Finally, it is believed that the use of this type of catalyst will be a starting point toward energy-efficient ammonia production.
RESUMEN
The electrochemical properties of metal oxides are very attractive and fascinating in general, making them a potential candidate for supercapacitor application. Vanadium oxide is of particular interest because it possesses a variety of valence states and is also cost effective with low toxicity and a wide voltage window. In the present study, vanadium oxide nanorods were synthesized using a modified sol-gel technique at low temperature. Surface morphology and crystallinity studies were carried out by using scanning electron microscopy, transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy analysis. To the best of our knowledge, the as-prepared nanorods were tested with magnesium ion based polymer gel electrolyte for the first time. The prepared supercapacitor cell exhibits high capacitance values of the order of ~ 141.8 F g-1 with power density of ~ 2.3 kW kg-1 and energy density of ~ 19.1 Wh kg-1. The cells show excellent rate capability and good cycling stability.
RESUMEN
In this paper, we present a comparative analysis of the optical properties of non-polar and polar GaN/AlGaN multi-quantum well (MQW) structures by time-resolved photoluminescence (TRPL) and pressure-dependent studies. The lack of internal electric fields across the non-polar structures results in an improved electron and hole wavefunction overlap with respect to the polar structures. Therefore, the radiative recombination presents shorter decay times, independent of the well width. On the contrary, the presence of electric fields in the polar structures reduces the emission energy and the wavefunction overlap, which leads to a strong decrease in the recombination rate when increasing the well width. Taking into account the different energy dependences of radiative recombination in non-polar and polar structures of the same geometry, and assuming that non-radiative processes are energy independent, we attempted to explain the 'S-shape' behavior of the PL energy observed in polar GaN/AlGaN QWs, and its absence in non-polar structures. This approach has been applied previously to InGaN/GaN structures, showing that the interplay of radiative and non-radiative recombination processes can justify the 'S-shape' in polar InGaN/GaN MQWs. Our results show that the differences in the energy dependences of radiative and non-radiative recombination processes cannot explain the 'S-shape' behavior by itself, and localization effects due to the QW width fluctuation are also important. Additionally, the influence of the electric field on the pressure behavior of the investigated structures was studied, revealing different pressure dependences of the PL energy in non-polar and polar MQWs. Non-polar MQWs generally follow the pressure dependence of the GaN bandgap. In contrast, the pressure coefficients of the PL energy in polar QWs are highly reduced with respect to those of the bulk GaN, which is due to the hydrostatic-pressure-induced increase in the piezoelectric field in quantum structures and the nonlinear behavior of the piezoelectric constant.