Physicochemical analysis of wastewater generated from a coating industry in Mauritius.

The coating industry is one of the most important consumers of water and chemicals and consequently is a major water polluter in Mauritius. The focus of this study was to characterise wastewater generated by a coating industry in Mauritius. The objectives were to develop a wastewater sampling strategy and to analyse the pollutant parameters as per Mauritian regulations. The wastewater samples were analysed for physicochemical properties and metal abundances over a period of 6 months. The physicochemical parameters analysed were pH, electrical conductivity (EC), true colour, total suspended solids (TSS), biological oxygen demand (BOD5), chemical oxygen demand (COD), nitrate, phosphate, sulphate and free chlorine. The wastewater samples were also analysed for metal ions such as sodium, potassium, arsenic, cadmium, chromium, cobalt, copper, iron, lead, manganese, mercury, molybdenum, nickel and zinc. The results of the physicochemical parameters indicated the presence of biologically resistant organic matters in all the wastewater samples with elevated values of BOD5 and COD, and low biodegradability index, respectively. The coating industry wastewater samples were acidic and saline in nature. Moreover, they presented high concentrations of TSS, free chlorine and sodium ions compared to standard limits promulgated by the Mauritian Government. Spearman's rank correlation matrix with non-linear regression analysis showed significant associations among the measured parameters which were found to have a common origin in the coating industry wastewater. This research will be useful for regular monitoring and setting up an adequate coating industry wastewater treatment for the potential reuse in production processes in Mauritius.

Microplastics in agricultural soils, wastewater effluents and sewage sludge in Mauritius.

The rapid and silent emergence of microplastics (MPs) in the environment has recently become a global problem with more and more studies are showing the harmful effects of MPs on different ecosystems. The aim of this study was to investigate the presence of MPs in agricultural soils, wastewater effluents and sewage sludge in Mauritius. The soil samples were collected randomly from three different agricultural lands which have been used for conventional agriculture for more than 25 years. Wastewater effluents and sewage sludge were collected once, using the grab sampling method, from three main operating wastewater treatment plants (WWTP) across the island and were analysed in triplicate. MPs were extracted using the flotation technique, followed by hydrogen peroxide digestion. The abundance of MPs was found to be 320.0 ± 112.2 and 420.0 ± 244.0 particles.kg-1 in shallow and deep soils, respectively, out of which 42.4% and 95.8% were less than 1 mm in size, respectively. Site 3 had the highest abundance of MPs due to cumulated plastic debris dumped on the field. In addition, the average MPs concentration in sewage sludge and in wastewater effluents were 14,750 ± 8612.9 particles.kg-1 and 276.3 ± 137.3 particles.L-1, respectively, whereby 90% of the MPs were less than 0.5 mm in size. WWTP 1 had the largest share of MPs in both sewage sludge and wastewater effluents. The attenuated total reflection Fourier transform infrared spectroscopy revealed that polypropylene (fibres, fragments, and flakes) was in abundance in agricultural soil samples by 56.26%, while in WWTP polyamide (fibres) was predominant by 88.85%. The findings of this preliminary study confirmed the presence of MPs in Mauritian lands, wastewater effluents and sewage sludge and therefore provide salient data to advocate for subsequent research on MPs.