RESUMEN
The unsaturated amides are traditionally synthesized by acylation of carboxylic acids or hydration of nitrile compounds but are rarely investigated by hydroaminocarbonylation of alkynes using heterogeneous single-metal-site catalysts (HSMSCs). Herein, single-Pd-site catalysts supported on N-doping carbon (NC) with different nitrogen dimensions inherited from corresponding metal-organic-framework precursors are successfully synthesized. 2D NC-supported single-Pd-site (Pd1/NC-2D) exhibited the best performance with near 100% selectivity and 76% yield of acrylamide for acetylene hydroaminocarbonylation with better stability, superior to those of Pd1/NC-3D, single-metal-site/nanoparticle coexisting catalyst, and nanoparticle catalyst. The coordination environment and molecular evolution of the single-Pd-site during the process of acetylene hydroaminocarbonylation on Pd1/NC-2D are detailly illuminated by various characterizations and density functional theoretical calculations (DFT). DFT also showed the energy barrier of rate-determining step on Pd1/NC-2D is lower than that of Pd1/NC-3D. Furthermore, Pd1/NC-2D catalyst illustrated the general applicability of the hydroaminocarbonylation for various alkynes.
RESUMEN
The direct conversion of low alkane such as ethane into high-value-added chemicals has remained a great challenge since the development of natural gas utilization. Herein, we achieve an efficient one-step conversion of ethane to C2 oxygenates on a Rh1/AC-SNI catalyst under a mild condition, which delivers a turnover frequency as high as 158.5 h-1. 18O isotope-GC-MS shows that the formation of ethanol and acetaldehyde follows two distinct pathways, where oxygen and water directly participate in the formation of ethanol and acetaldehyde, respectively. In situ formed intermediate species of oxygen radicals, hydroxyl radicals, vinyl groups, and ethyl groups are captured by laser desorption ionization/time of flight mass spectrometer. Density functional theory calculation shows that the activation barrier of the rate-determining step for acetaldehyde formation is much lower than that of ethanol, leading to the higher selectivity of acetaldehyde in all the products.
RESUMEN
Tuning the coordination environment of the metal center in metal-nitrogen-carbon (M-N-C) single-atom catalysts via heteroatom-doping (oxygen, phosphorus, sulfur, etc.) is effective for promoting electrocatalytic CO2 reduction reaction (CO2 RR). However, few studies are investigated establishing efficient CO2 reduction by introducing boron (B) atoms to regulate the M-N-C structure. Herein, a B-C3 N4 self-sacrifice strategy is developed to synthesize B, N co-coordinated Ni single atom catalyst (Ni-BNC). X-ray absorption spectroscopy and high-angle annular dark field scanning transmission electron microscopy confirm the structure (Ni-N3 B/C). The Ni-BNC catalyst presents a maximum CO Faradaic efficiency (FECO ) of 98.8% and a large CO current density (jCO ) of -62.9 mA cm-2 at -0.75 and -1.05 V versus reversible hydrogen electrode, respectively. Furthermore, FECO could be maintained above 95% in a wide range of potential windows from -0.65 to -1.05 V. In situ experiments and density functional theory calculations demonstrate the Ni-BNC catalyst with B atoms coordinated to the central Ni atoms could significantly reduce the energy barrier for the conversion of *CO2 to *COOH, leading to excellent CO2 RR performance.
RESUMEN
Heteroatom-doping is an effective method for modifying the geometric symmetry of metal-nitrogen-carbon (M-N-C) single-atom catalysts and thereby tuning the electronic structure. Up to now, most of the current reports have concentrated on introducing heteroatoms into the highly symmetrical M-N4 structure. The coordination-unsaturated M-N2 structure is more sterically favorable for the insertion of alien atoms to optimize the electronic structure. Herein, a Ni-N2 catalyst with out-of-plane coordinated chlorine (Cl) atoms (Ni-N2 Cl/C) is successfully constructed on chlorine-functionalized carbon supports (C-Cl) for an efficient carbon dioxide reduction reaction (CO2 RR). Density functional theory calculations demonstrate that the prepared Ni-N2 Cl/C catalyst exhibits a higher capability in balancing COOH* formation and CO* desorption. In addition, in situ Raman spectra confirm that the lower CO binding energy on the Ni-N2 Cl/C facilitates CO escape, leading to excellent CO2 RR performance. A high CO Faradaic efficiency (FECO ) of more than 80% is achieved from -0.6 to -1.2 V versus reversible hydrogen electrode on the Ni-N2 Cl/C and it exhibits negligible FECO and current declination over a 40-h stability test. Furthermore, a high turnover frequency (TOF) value of 15 808 h-1 is obtained, which is more than ten times that of Ni-N2 /C (1476 h-1 ) without coordinated Cl atoms.
RESUMEN
Heterogeneous single-metal-site catalysts usually suffer from poor stability, thereby limiting industrial applications. Dual Pd1 -Ru1 single-atom-sites supported on porous ionic polymers (Pd1 -Ru1 /PIPs) were constructed using a wetness impregnation method. The two isolated metal species in the form of a binuclear complex were immobilized on the cationic framework of PIPs through ionic bonds. Compared to the single Pd- or Ru-site catalyst, the dual single-atom system exhibits higher activity with 98 % acetylene conversion and near 100 % selectivity to dialkoxycarbonylation products, as well as better cycling stability for ten cycles without obvious decay. Based on DFT calculations, it was found that the single-Ru site exhibited a strong CO adsorption energy of -1.6â eV, leading to an increase in the local CO concentration of the catalyst. Notably, the Pd1 -Ru1 /PIPs catalyst had a much lower energy barrier of 2.49â eV compared to 3.87â eV of Pd1 /PIPs for the rate-determining step. The synergetic effect between neighboring single sites Pd1 and Ru1 not only enhanced the overall activity, but also stabilized PdII active sites. The discovery of synergetic effects between single sites can deepen our understanding of single-site catalysts at the molecular level.
RESUMEN
Sulfur poisoning and regeneration are global challenges for metal catalysts even at the ppm level. The sulfur poisoning of single-metal-site catalysts and their regeneration is worthy of further study. Herein, sulfur poisoning and self-recovery are first presented on an industrialized single-Rh-site catalyst (Rh1 /POPs). A decreased turnover frequency of Rh1 /POPs from 4317â h-1 to 318â h-1 was observed in a 1000â ppm H2 S co-feed for ethylene hydroformylation, but it self-recovered to 4527â h-1 after withdrawal of H2 S, whereas the rhodium nanoparticles demonstrated poor activity and self-recovery ability. H2 S reduced the charge density of the single Rh atom and lowered its Gibbs free energy with the formation of inactive (SH)Rh(CO)(PPh3 -frame)2 , which could be regenerated to active HRh(CO)(PPh3 -frame)2 after withdrawing H2 S. The mechanism and the sulfur-related structure-activity relationship were highlighted. This work provides an understanding of heterogeneous ethylene hydroformylation and sulfur-poisoned regeneration in the science of single-atom catalysts.
RESUMEN
A heterogeneous hydrocarboxylation process of olefins to obtain carboxylic acids with one more carbon was first realized using a single-Rh-site catalyst formed on porous organic polymer (Rh1/POPs). The in situ formation of hydrophilic porous ionic polymer from hydrophobic POPs with the help of CH3I led to high activity and superb stability.
RESUMEN
Supported noble metal nanoclusters and single-metal-site catalysts are inclined to aggregate into particles, driven by the high surface-to-volume ratio. Herein, we report a general method to atomically disperse noble metal nanoparticles. The activated carbon supported nanoparticles of Ru, Rh, Pd, Ag, Ir and Pt metals with loading up to 5 wt. % are completely dispersed by reacting with CH3I and CO mixture. The dispersive process of the Rh nanoparticle is investigated in depth as an example. The in-situ detected I⢠radicals and CO molecules are identified to promote the breakage of Rh-Rh bonds and the formation of mononuclear complexes. The isolated Rh mononuclear complexes are immobilized by the oxygen-containing functional groups based on the effective atomic number rule. The method also provides a general strategy for the development of single-metal-site catalysts for other applications.
RESUMEN
Novel porous polymers can serve as self-supporting solid carriers and provide abundant coordination or charged sites for single-site metals, and thus are emerging as advanced functional materials in heterogeneous catalysis for various transformations traditionally catalyzed by homogeneous systems. A brief overview of the development of this heterogenization given, including the recent advances regarding electrovalent bonds by employing charged supports represented by porous ionic polymers (PIPs), which is exemplified herein with a novel single-site Rh1 /PIP catalyst, featuring a new active site [Rh(CO)I3 ]2- dual-ionically bound onto a quaternary phosphonium cationic framework polymer, different from the single-ionically bound [Rh(CO)2 I2 ]- in previous studies. Such a unique metal configuration of Rh1 /PIP leads to excellent performance in vapor-phase methanol carbonylation, outperforming commercial homo- and heterogeneous catalysts.