Sustainable reprocessing of lithium iron phosphate batteries: A recovery approach using liquid-phase method at reduced temperature.

Lithium iron phosphate batteries, known for their durability, safety, and cost-efficiency, have become essential in new energy applications. However, their widespread use has highlighted the urgency of battery recycling. Inadequate management could lead to resource waste and environmental harm. Traditional recycling methods, like hydrometallurgy and pyrometallurgy, are complex and energy-intensive, resulting in high costs. To address these challenges, this study introduces a novel low-temperature liquid-phase method for regenerating lithium iron phosphate positive electrode materials. By using N2H4·H2O as a reducing agent, missing Li+ ions are replenished, and anti-site defects are reduced through annealing. This process restores nearly all missing Li+ ions at 80 °C/6h. After high-temperature sintering at 700 °C/2h, the regenerated LiFePO4 matches commercial LiFePO4 in terms of anti-site defects and exhibits excellent performance with a 97 % capacity retention rate after 100 cycles at 1C. Compared to high-temperature techniques, this low-temperature liquid-phase method is simpler, safer, and more energy-efficient, offering a blueprint for reclaiming discarded LiFePO4 and similar materials.

Bismuth-Containing Quadruple Therapy for Helicobacter pylori Eradication: A Randomized Clinical Trial of 10 and 14 Days.

BACKGROUND: Bismuth-containing quadruple therapy is the first-line treatment for eradicating Helicobacter pylori (H. pylori). The optimal duration for H. pylori eradication using bismuth-containing quadruple therapy remains controversial. Therefore, we aimed to compare the clinical effects of the 10- and 14-day bismuth-containing quadruple treatment regimen to eradicate H. pylori. METHODS: Treatment-naïve patients with H. pylori infection (n = 1300) were enrolled in this multicenter randomized controlled study across five hospitals in China. They were randomized into 10- or 14-day treatment groups to receive bismuth-containing quadruple therapy as follows: vonoprazan 20 mg twice daily; bismuth 220 mg twice daily; amoxicillin 1000 mg twice daily; and either clarithromycin 500 mg twice daily or tetracycline 500 mg four times daily. At least 6 weeks after treatment, we performed a 13C-urea breath test to evaluate H. pylori eradication. RESULTS: The per-protocol eradication rates were 93.22% (564/605) and 93.74% (569/607) (p < 0.001) and the intention-to-treat eradication rates were 88.62% (576/650) and 89.38% (581/650) (p = 0.007) for the 10- and 14-day regimens, respectively. Incidence of adverse effects was lower in patients who received 10- vs. 14 days of treatment (22.59% vs. 28.50%, p = 0.016). We observed no significant differences in the compliance to treatment or the discontinuation of therapy because of severe adverse effects between the groups. CONCLUSION: Compared with the 14-day bismuth-containing quadruple regimens, the 10-day regimen demonstrated a non-inferior efficacy and lower incidence of adverse effects. Therefore, the 10-day regimen is safe and tolerated and could be recommended for H. pylori eradication (NCT05049902).

Clinical use of macitentan in the treatment of connective tissue disease-associated pulmonary arterial hypertension.

Background: Connective tissue disease (CTD) is the second most common cause of the pulmonary arterial hypertension (PAH). Currently, clinical data concerning CTD-PAH is scarce. Our study aimed to assess the efficacy and safety of macitentan in the treatment of CTD-PAH. Methods: In this retrospective study, patients diagnosed with CTD-PAH at The First Affiliated Hospital of Soochow University from April 2020 to November 2021 were included. Of the patients, 9 were switched to macitentan monotherapy whereas 23 received initial combination therapy. The mean follow-up time was 24 weeks. Six-minute walking distance (6MWD), World Health Organization functional class (WHO-FC), serum N-terminal pro-brain natriuretic peptide (NT-proBNP), and echocardiography parameters before and after medication were assessed. Adverse reactions were also recorded and compared. Results: After 24 weeks of treatment, 6MWD, NT-proBNP, systolic pulmonary artery pressure (sPAP) estimated by ultrasound, tricuspid regurgitation pressure gradient (TRPG) and tricuspid annular plane systolic excursion (TAPSE) in the macitentan monotherapy group revealed significant differences (Z=-2.67, Z=-2.67, t=6.20, t=5.60, t=-3.04, P<0.05). There were no statistically significant differences in right ventricular diameter (RVD), right atrial diameter (RAD), ascending aortic root inner diameter (AAO) and left ventricular end-diastolic diameter (LVEDd) (P>0.05). After 24 weeks of medication, the number of patients with WHO-FC grade III/IV symptoms decreased from 6 to 3, 1 to 0 respectively (P<0.05), and that of patients with WHO-FC grade I/II symptoms increased from 0 to 2, 2 to 4 respectively(P<0.05). After 24 weeks of treatment, 6MWD, NT-proBNP, LVEDd, sPAP and TRPG in the macitentan combined with sildenafil treatment group revealed statistically significant differences (Z=-4.11, Z=-3.74, Z=-3.83, t=6.88, t=6.54, P<0.001). Significant differences in RVD, RAD, and TAPSE were found (t=3.46, t=3.69, t=-3.12, P<0.05). There were no statistically significant variances in AAO between the groups (P>0.05). The number of patients with WHO-FC grade III/IV symptoms decreased from 16 to 8, 5 to 0 respectively (P<0.05), and that of patients with WHO-FC grade I/II symptoms increased from 0 to 1, 2 to 14 respectively (P<0.001). There were no statistically significant differences before and after treatment in 6MWD, NT-proBNP, RVD, RAD, AAO, LVEDd, sPAP, TRPG and TAPSE between the two groups (P>0.05). There were no statistically significant differences in alanine aminotransferase (ALT), aspartate aminotransferase (AST), serum creatinine (Scr) and hemoglobin (Hb) between 0 and 24 weeks (P>0.05). Conclusions: Exercise tolerance and cardiac function in patients with CTD-PAH were significantly improved after treatment with macitentan, which was well tolerated. Therefore, macitentan may be an effective and safe targeted drug for CTD-PAH.

Innovative Solutions for High-Performance Silicon Anodes in Lithium-Ion Batteries: Overcoming Challenges and Real-World Applications.

Silicon (Si) has emerged as a potent anode material for lithium-ion batteries (LIBs), but faces challenges like low electrical conductivity and significant volume changes during lithiation/delithiation, leading to material pulverization and capacity degradation. Recent research on nanostructured Si aims to mitigate volume expansion and enhance electrochemical performance, yet still grapples with issues like pulverization, unstable solid electrolyte interface (SEI) growth, and interparticle resistance. This review delves into innovative strategies for optimizing Si anodes' electrochemical performance via structural engineering, focusing on the synthesis of Si/C composites, engineering multidimensional nanostructures, and applying non-carbonaceous coatings. Forming a stable SEI is vital to prevent electrolyte decomposition and enhance Li+ transport, thereby stabilizing the Si anode interface and boosting cycling Coulombic efficiency. We also examine groundbreaking advancements such as self-healing polymers and advanced prelithiation methods to improve initial Coulombic efficiency and combat capacity loss. Our review uniquely provides a detailed examination of these strategies in real-world applications, moving beyond theoretical discussions. It offers a critical analysis of these approaches in terms of performance enhancement, scalability, and commercial feasibility. In conclusion, this review presents a comprehensive view and a forward-looking perspective on designing robust, high-performance Si-based anodes the next generation of LIBs.

A novel intraocular pressure predicting method based on hyperelastic mechanical model of cornea.

Measuring intraocular pressure (IOP) is crucial and remains challenging in diagnosing glaucoma, as it is associated with cornea deformation during inflation. In this study, a three-dimensional analytical model based on hyperelastic constitutive relationship to predict correlation between cornea vertex displacement and the IOP is proposed. The analytical model is validated by rigorous experiments. Rabbit corneas were selected for this study and their mechanical properties were obtained using uniaxial tensile tests. To mimic the environment in which the cornea exists, an artificial anterior chamber equipped with water-injection pipelines was constructed to study the relationship between the corneal vertex displacement with IOP value in practical situation. The experimental results of rabbits corneas prove that the IOP can be deduced based on the measured corneal vertex displacement by the analytical model. Furthermore, subtle difference occurs when comparing the calculated human IOPs with those measured by medical equipment, demonstrating that the proposed method is suitable for monitoring the IOP of human. This novel IOP predicting method provides new inspiration for the design of eyepieces, as well as the preoperative preparation for laser surgery and evaluation of corneal damage.

Combined genome and transcriptome analysis of elite fiber quality in Gossypium barbadense.

Gossypium barbadense, which is one of several species of cotton, is well-known for its superior fiber quality. However, the genetic basis of its high-quality fiber remains largely unexplored. Here, we re-sequenced 269 G. barbadense accessions. Phylogenetic structure analysis showed that the set of accessions were clustered into three groups, G1 and G2 mainly included modern cultivars from Xinjiang, China, and G3 was related to widely introduced accessions in different regions worldwide. A genome-wide association study of five fiber quality traits across multiple field environments identified a total of 512 qtls (main effect QTLs) and 94 qtlEs (QTL-by-environment interactions) related to fiber quality, of which 292 qtls and 57 qtlEs co-located with previous studies. We extracted the genes located in these loci and performed expression comparison, local association analysis, and introgression segment identification. The results showed that high expression of hormone-related genes during fiber development, introgressions from G. hirsutum, and the recombination of domesticated elite allelic variation, were three major contributors to improve fiber quality of G. barbadense. In total, 839 candidate genes with encoding region variation associated with elite fiber quality were mined. We confirmed that haplotype GB_D03G0092H traced from G. hirsutum introgression, with a 1-bp deletion leading to a frameshift mutation compared with GB_D03G0092B, significantly improved fiber quality. GB_D03G0092H localized in the plasma membrane, while GB_D03G0092B in both the nucleus and plasma membrane. Overexpression of GB_D03G0092H in Arabidopsis (Arabidopsis thaliana) significantly improved the elongation of longitudinal cells. Our study systematically reveals the genetic basis of the superior fiber quality of G. barbadense and provides elite segments and gene resources for breeding high-quality cotton cultivars.

Revealing microscopic dynamics: in situ liquid-phase TEM for live observations of soft materials and quantitative analysis via deep learning.

In various domains spanning materials synthesis, chemical catalysis, life sciences, and energy materials, in situ transmission electron microscopy (TEM) methods exert a profound influence. These methodologies enable the real-time observation and manipulation of gas-phase and liquid-phase reactions at the nanoscale, facilitating the exploration of pivotal reaction mechanisms. Fundamental research areas like crystal nucleation, growth, etching, and self-assembly have greatly benefited from these techniques. Additionally, their applications extend across diverse fields such as catalysis, batteries, bioimaging, and drug delivery kinetics. However, the intricate nature of 'soft matter' presents a challenge due to the unique molecular properties and dynamic behavior of these substances that remain insufficiently understood. Investigating soft matter within in situ liquid-phase TEM settings demands further exploration and advancement compared to other research domains. This research harnesses the potential of in situ liquid-phase TEM technology while integrating deep learning methodologies to comprehensively analyze the quantitative aspects of soft matter dynamics. This study centers on diverse phenomena, encompassing surfactant molecule nucleation, block copolymer behavior, confinement-driven self-assembly, and drying processes. Furthermore, deep learning techniques are employed to precisely analyze Ostwald ripening and digestive ripening dynamics. The outcomes of this study not only deepen the understanding of soft matter at its fundamental level but also serve as a pivotal foundation for developing innovative functional materials and cutting-edge devices.

Effect of SARS-CoV-2 infection on semen parameters in sperm bank volunteers with normal sperm concentration.

In this study, we aimed to assess the effect of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection on semen parameters. The study comprised 110 sperm volunteers who self-reported SARS-CoV-2 infection from the Human Sperm Bank of the Center for Reproductive Medicine, Shandong University (Jinan, China). The volunteers had normal sperm concentration before infection. Each volunteer provided semen samples before and after infection. We selected 90 days after infection as the cutoff point. Semen parameters within 90 days after infection of 109 volunteers (group A) were compared with semen parameters before infection. Moreover, semen parameters on or after 90 days after infection of 36 volunteers (group B) were compared with semen parameters before infection. Furthermore, based on whether the volunteers had completed the three-dose SARS-CoV-2 vaccination booster, volunteers in group A and B were further divided into two subgroups separately. Semen parameters were compared before and after infection in each subgroup. Our results showed that in this cohort population, the semen quality in volunteers with normal sperm concentrations before infection decreased after SARS-CoV-2 infection within 90 days, while the semen quality returned to preinfection levels after 90 days. The completion of a three-dose SARS-CoV-2 vaccination booster may exert a protective effect on semen quality after infection.

Development of a Real-Time qPCR Method for the Clinical Sample Detection of Capripox Virus.

Capripox viruses (CaPVs), including sheep pox virus (SPV), goat pox virus (GPV), and lumpy skin disease virus (LSDV), are the cause of sheep pox (SPP), goat pox (GTP), and lumpy skin disease (LSD) in cattle. These diseases are of great economic significance to farmers, as they are endemic on farms and are a major constraint to international trade in livestock and their products. Capripoxvirus (CaPV) infections produce similar symptoms in sheep and goats, and the three viruses cannot be distinguished serologically. In this study, we developed a real-time quantitative polymerase chain reaction (qPCR) method for identifying CaPV in goats, sheep, and cattle. Clinical samples were tested and verified. The developed assay was highly specific for target viruses, including GPVSPV and LSDV, which had no cross-reaction with other viruses causing similar clinical symptoms. An artificially synthesized positive control plasmid using the CaPV 32 gene inserted into the vector pMD19-T was used as a template, and the correlation coefficient of the linear regression curve (R2) was 0.9916, the estimated amplification efficiency (E) was 96.06%, and the sensitivity (limit of detection, LOD) was 3.80 copies per reaction. Using the clinical samples as a template, the limit of detection (LOD) was 4.91 × 10-5 ng per reaction (1.60 × 10-5-2.13 × 10-3 ng, 95% confidence interval (CI)), which means that this method was one of the most sensitive detection assays for CaPVs. A total of 85 clinical samples from CaPV-infected animals (goats, sheep, and cattle) and 50 clinical samples from healthy animals were used to test and compare the diagnostic results using the Synergy Brands (SYBR) Green-based PCR method recommended by the World Organization of Animal Health (WOAH). Both diagnostic sensitivity (DSe) (95.8-100%, 95% CI) and diagnostic specificity (DSp) (92.9-100%, 95% CI) results of the real-time quantitative PCR (qPCR) and SYBR Green PCR were 100%, and the kappa value (κ) was 1.0 (1-1, 95% CI). In summary, the assay established based on TaqMan probes was advantageous in high specificity, sensitivity, and general applicability and could be a competitive candidate tool for the diagnosis of CaPV in clinically suspected animals.

Cataract-causing mutations S78F and S78P of γD-crystallin decrease protein conformational stability and drive aggregation.

Congenital cataract is the leading cause of childhood blindness, which primarily results from genetic factors. γD-crystallin is the most abundant γ-crystallin and is essential for maintaining lens transparency and refractivity. Numerous mutations in γD-crystallin have been reported with unclear pathogenic mechanism. Two different cataract-causing mutations Ser78Phe and Ser78Pro in γD-crystallin were previously identified at the same conserved Ser78 residue. In this work, firstly, we purified the mutants and characterized for the structural change using fluorescence spectroscopy, circular dichroism (CD) spectroscopy, and size-exclusion chromatography (SEC). Both mutants were prone to form insoluble precipitates when expressed in Escherichia coli strain BL21 (DE3) cells. Compared with wild-type (WT), both mutations caused structural disruption, increased hydrophobic exposure, decreased solubility, and reduced thermal stability. Next, we investigated the aggregation of the mutants at the cellular level. Overexpression the mutants in HLE-B3 and HEK 293T cells could induce aggresome formations. The environmental stresses (including heat, ultraviolet irradiation and oxidative stress) promoted the formation of aggregates. Moreover, the intracellular S78F and S78P aggregates could be reversed by lanosterol. Molecular dynamic simulation indicated that both mutations disrupted the structural integrity of Greek-key motif 2. Hence, our results reveal the vital role of conserved Ser78 in maintaining the structural stability, which can offer new insights into the mechanism of cataract formation.

Design and Processing of Gas Turbine Blades Based on Additive Manufacturing Technology.

Aiming at the problems of the complex shape, difficult three-dimensional (3D) digital modeling and high manufacturing quality requirements of gas turbine blades (GTB), a method of fitting the blade profile line based on a cubic uniform B-spline interpolation function was proposed. Firstly, surface modeling technology was used to complete the fitting of the blade profile of the GTB, and the 3D model of the GTB was synthesized. Secondly, the processing parameters of the additive manufacturing were set, and the GTB model was printed by fused deposition technology. Then, the rapid investment casting was completed with the printed model as a wax model to obtain the GTB casting. Finally, the blade casting was post-processed and measured, and it was found to meet the requirements of machining accuracy and surface quality.

Simulating Chern insulators on a superconducting quantum processor.

The quantum Hall effect, fundamental in modern condensed matter physics, continuously inspires new theories and predicts emergent phases of matter. Here we experimentally demonstrate three types of Chern insulators with synthetic dimensions on a programable 30-qubit-ladder superconducting processor. We directly measure the band structures of the 2D Chern insulator along synthetic dimensions with various configurations of Aubry-André-Harper chains and observe dynamical localisation of edge excitations. With these two signatures of topology, our experiments implement the bulk-edge correspondence in the synthetic 2D Chern insulator. Moreover, we simulate two different bilayer Chern insulators on the ladder-type superconducting processor. With the same and opposite periodically modulated on-site potentials for two coupled chains, we simulate topologically nontrivial edge states with zero Hall conductivity and a Chern insulator with higher Chern numbers, respectively. Our work shows the potential of using superconducting qubits for investigating different intriguing topological phases of quantum matter.

Biomass Separators as a "Lifesaver" for Safe and Long-Life Lithium Metal Batteries.

The growth of lithium dendrites and the shuttle of polysulfides in lithium metal batteries (LMBs) have hindered their development. In LMBs, the cathode and anode are separated by a separator, although this does not solve the battery's issues. The use of biomass materials is widespread for modifying the separator due to their porous structure and abundant functional groups. LMBs perform more electrochemically when lithium ions are deposited uniformly and polysulfide shuttling is reduced using biomass separators. In this review, we analyze the growth of lithium dendrite and the shuttle of polysulfide in LMBs, summarize the types of biomass separator materials and the mechanisms of action (providing mechanical barriers, promoting uniform deposition of metal ions, capturing polysulfides, shielding polysulfide). The prospect of developing new separator materials from the perspective of regulating ion transport and physical sieving efficiency as well as the application of advanced technologies such as synchrotron radiation to characterize the mechanism of action of biomass separators is also proposed.

Quantum Simulation of Topological Zero Modes on a 41-Qubit Superconducting Processor.

Quantum simulation of different exotic topological phases of quantum matter on a noisy intermediate-scale quantum (NISQ) processor is attracting growing interest. Here, we develop a one-dimensional 43-qubit superconducting quantum processor, named Chuang-tzu, to simulate and characterize emergent topological states. By engineering diagonal Aubry-André-Harper (AAH) models, we experimentally demonstrate the Hofstadter butterfly energy spectrum. Using Floquet engineering, we verify the existence of the topological zero modes in the commensurate off-diagonal AAH models, which have never been experimentally realized before. Remarkably, the qubit number over 40 in our quantum processor is large enough to capture the substantial topological features of a quantum system from its complex band structure, including Dirac points, the energy gap's closing, the difference between even and odd number of sites, and the distinction between edge and bulk states. Our results establish a versatile hybrid quantum simulation approach to exploring quantum topological systems in the NISQ era.

Space exposure enhanced pectin-degrading enzymes expression and activity in Aspergillus costaricaensis.

Aspergillus is a well-studied fungal genus that is widely used in the processing of plant biomass in industries. This study investigated the effects of space exposure on the ability of Aspergillus costaricaensis, a filamentous fungus isolated from rotten orange peel, to degrade pectin. These fungal spores were carried into space by the Long March 5B carrier rocket and exposed to cosmic radiation for 79 h. After the flight, these spores were resuscitated, and then the growing strains were screened with pectin as the sole carbon source, and the pectinase activity was evaluated. A mutant with increased biomass accumulation ability and pectin-degrading activity compared to the ground control strain was obtained. Comparative transcriptome analysis revealed that several CAZymes genes were significantly upregulated in the mutant, especially those related to pectin degradation. Among the 44 pectinases identified from the annotated genome, 42 were up-regulated. The activities of these pectinases are able to synergistically break down the structure of pectin. In addition, the expression of some genes involved in metabolism, sugar transport, and stress response was altered. These results imply that space exposure might serve as a potential mutagenesis breeding technique, offering the opportunity to acquire biomass-degrading microbial strains with potential for industrial application.

LIPID TRANSFER PROTEIN4 regulates cotton ceramide content and activates fiber cell elongation.

Cell elongation is a fundamental process for plant growth and development. Studies have shown lipid metabolism plays important role in cell elongation; however, the related functional mechanisms remain largely unknown. Here, we report that cotton (Gossypium hirsutum) LIPID TRANSFER PROTEIN4 (GhLTP4) promotes fiber cell elongation via elevating ceramides (Cers) content and activating auxin-responsive pathways. GhLTP4 was preferentially expressed in elongating fibers. Over-expression and down-regulation of GhLTP4 led to longer and shorter fiber cells, respectively. Cers were greatly enriched in GhLTP4-overexpressing lines and decreased dramatically in GhLTP4 down-regulating lines. Moreover, auxin content and transcript levels of indole-3-acetic acid (IAA)-responsive genes were significantly increased in GhLTP4-overexpressing cotton fibers. Exogenous application of Cers promoted fiber elongation, while NPA (N-1-naphthalic acid, a polar auxin transport inhibitor) counteracted the promoting effect, suggesting that IAA functions downstream of Cers in regulating fiber elongation. Furthermore, we identified a basic helix-loop-helix transcription factor, GhbHLH105, that binds to the E-box element in the GhLTP4 promoter region and promotes the expression of GhLTP4. Suppression of GhbHLH105 in cotton reduced the transcripts level of GhLTP4, resulting in smaller cotton bolls and decreased fiber length. These results provide insights into the complex interactions between lipids and auxin-signaling pathways to promote plant cell elongation.

Understanding ZIF particle chemical etching dynamics and morphology manipulation: in situ liquid phase electron microscopy and 3D electron tomography application.

In situ liquid phase transmission electron microscopy (TEM) and three-dimensional electron tomography are powerful tools for investigating the growth mechanism of MOFs and understanding the factors that influence their particle morphology. However, their combined application to the study of MOF etching dynamics is limited due to the challenges of the technique such as sample preparation, limited field of view, low electron density, and data analysis complexity. In this research, we present a study employing in situ liquid phase TEM to investigate the etching mechanism of colloidal zeolitic imidazolate framework (ZIF) nanoparticles. The etching process involves two distinct stages, resulting in the development of porous structures as well as partially and fully hollow morphologies. The etching process is induced by exposure to an acid solution, and both in situ and ex situ experiments demonstrate that the outer layer etches faster leading to overall volume shrinking (stage I) while the inner layer etches faster giving a hollow morphology (stage II), although both the outer layer and inner layer have been etched in the whole process. 3D electron tomography was used to quantify the properties of the hollow structures which show that the ZIF-67 crystal etching rate is larger than that of the ZIF-8 crystal at the same pH value. This study provides valuable insights into MOF particle morphology control and can lead to the development of novel MOF-based materials with tailored properties for various applications.

A cell wall-localized ß-1,3-glucanase promotes fiber cell elongation and secondary cell wall deposition.

ß-1,3-glucanase functions in plant physiological and developmental processes. However, how ß-1,3-glucanase participates in cell wall development remains largely unknown. Here, we answered this question by examining the role of GhGLU18, a ß-1,3-glucanase, in cotton (Gossypium hirsutum) fibers, in which the content of ß-1,3-glucan changes dynamically from 10% of the cell wall mass at the onset of secondary wall deposition to <1% at maturation. GhGLU18 was specifically expressed in cotton fiber with higher expression in late fiber elongation and secondary cell wall (SCW) synthesis stages. GhGLU18 largely localized to the cell wall and was able to hydrolyze ß-1,3-glucan in vitro. Overexpression of GhGLU18 promoted polysaccharide accumulation, cell wall reconstruction, and cellulose synthesis, which led to increased fiber length and strength with thicker cell walls and shorter pitch of the fiber helix. However, GhGLU18-suppressed cotton resulted in opposite phenotypes. Additionally, GhGLU18 was directly activated by GhFSN1 (fiber SCW-related NAC1), a NAC transcription factor reported previously as the master regulator in SCW formation during fiber development. Our results demonstrate that cell wall-localized GhGLU18 promotes fiber elongation and SCW thickening by degrading callose and enhancing polysaccharide metabolism and cell wall synthesis.

Heavier Load Alters Upper Limb Muscle Synergy with Correlated fNIRS Responses in BA4 and BA6.

In neurorehabilitation, motor performances may improve if patients could accomplish the training by overcoming mechanical loads. When the load inertia is increased, it has been found to trigger linear responses in motor-related cortices. The cortical responses, however, are unclear whether they also correlate to changes in muscular patterns. Therefore, it remains difficult to justify the magnitude of load during rehabilitation because of the gap between cortical and muscular activation. Here, we test the hypothesis that increases in load inertia may alter the muscle synergies, and the change in synergy may correlate with cortical activation. Twelve healthy subjects participated in the study. Each subject lifted dumbbells (either 0, 3, or 15 pounds) from the resting position to the armpit repetitively at 1 Hz. Surface electromyographic signals were collected from 8 muscles around the shoulder and the elbow, and hemodynamic signals were collected using functional near-infrared spectroscopy from motor-related regions Brodmann Area 4 (BA4) and BA6. Results showed that, given higher inertia, the synergy vectors differed farther from the baseline. Moreover, synergy similarity on the vector decreased linearly with cortical responses in BA4 and BA6, which associated with increases in inertia. Despite studies in literature that movements with similar kinematics tend not to differ in synergy vectors, we show a different possibility that the synergy vectors may deviate from a baseline. At least 2 consequences of adding inertia have been identified: to decrease synergy similarity and to increase motor cortical activity. The dual effects potentially provide a new benchmark for therapeutic goal setting.

Quantum simulation of Hawking radiation and curved spacetime with a superconducting on-chip black hole.

Hawking radiation is one of the quantum features of a black hole that can be understood as a quantum tunneling across the event horizon of the black hole, but it is quite difficult to directly observe the Hawking radiation of an astrophysical black hole. Here, we report a fermionic lattice-model-type realization of an analogue black hole by using a chain of 10 superconducting transmon qubits with interactions mediated by 9 transmon-type tunable couplers. The quantum walks of quasi-particle in the curved spacetime reflect the gravitational effect near the black hole, resulting in the behaviour of stimulated Hawking radiation, which is verified by the state tomography measurement of all 7 qubits outside the horizon. In addition, the dynamics of entanglement in the curved spacetime is directly measured. Our results would stimulate more interests to explore the related features of black holes using the programmable superconducting processor with tunable couplers.