RESUMEN
BACKGROUND: Uncontrollable and widespread bleeding caused by surgery or sudden accidents can lead to death if not treated with appropriate hemostasis. To prevent excessive life-threatening bleeding, various hemostatic agents based on polymeric biomaterials with various additives for accelerated blood coagulation have been adopted in clinical fields. In particular, platelet-rich plasma (PRP), which contains many blood coagulation factors that can accelerate blood clot formation, is considered as one of the most effective hemostatic additives. METHODS: We investigated a PRP-embedded porous film using discarded (expired) PRP and a film with a leaf-stacked structure (FLSS), as a hemostatic agent to induce rapid hemostasis. The film, which contained an LSS on one side (PCL-FLSS), was fabricated by a simple heating-cooling technique using tetraglycol and polycaprolactone (PCL) film. Activated PRP was obtained by the thawing of frozen PRP at the end of its expiration date (the platelet cell membrane is disrupted during the freezing and thawing of PRP, thus releasing various coagulation factors) and embedded in the PCL-FLSS (PRP-FLSS). RESULTS: From in vitro and in vivo experiments using a rat hepatic bleeding model, it was recognized that PRP-FLSS is not only biocompatible but also significantly accelerates blood clotting and thus prevents rapid bleeding, probably due to a synergistic effect of the sufficient supply of various blood coagulants from activated PRP embedded in the LSS layer and the large surface area of the LSS itself. CONCLUSION: The study suggests that PRP-FLSS, a combination of a porous polymer matrix with a unique morphology and discarded biofunctional resources, can be an advanced hemostatic agent as well as an upcycling platform to avoid the waste of biofunctional resources.
RESUMEN
For the high-purity production of acetoin or 2,3-butanediol (BD) from related fermentation processes, it is essential to accomplish a detailed separation between acetoin and BD in an economical mode. To address this issue, we aimed to develop a highly-efficient simulated-moving-bed (SMB) process for the continuous-mode separation of acetoin from BD with high purity and small loss. As a first step for this task, the adsorption and mass-transfer parameters of acetoin and BD on a proven adsorbent were estimated while assuming that BD isomers (meso-BD and DL-BD) would be identical in adsorption and mass-transfer behaviors. The resultant parameters from such estimation were applied to the optimal design of the acetoin-BD separation SMB. The designed SMB was then experimentally investigated, which revealed that some sign of BD isomerism occurred in the SMB column-profile data and thus had an adverse effect on the SMB separation performance. To resolve this problem, the individual parameters of BD isomers were determined on the basis of the SMB column-profile data and an inverse-method principle. The resulting parameters of BD isomers were used in the re-design of the target SMB, which was then experimentally checked for its separation performance. It was confirmed that such SMB re-designed in consideration of BD isomerism was quite effective in the continuous-mode separation of acetoin from BD with high purity (> 99.2%) and small loss (< 1.52%).
Asunto(s)
Acetoína/aislamiento & purificación , Butileno Glicoles/aislamiento & purificación , Cromatografía/métodos , Adsorción , Isomerismo , Reproducibilidad de los ResultadosRESUMEN
If a multi-component monosugar mixture including fucose was used as the substrates for the Klebsiella oxytoca fermentation, it could offer the following two benefits simultaneously; (i) the removal of all monosugars other than fucose, and (ii) the acquisition of 2,3-butanediol (BD). To utilize such two benefits in favor of the economical efficiency of the fucose production process, it is essential to accomplish a high-purity separation between fucose and BD on the basis of a highly-economical mode. To address this issue, we aimed to develop a simulated moving bed (SMB) process for continuous-mode separation of fucose and BD with high purities. It was first found that an Amberchrom-CG71C resin could become a suitable adsorbent for the separation of interest. The intrinsic parameters of fucose and BD on such proven adsorbent were determined, and then applied to the optimal design of the fucose-BD separation SMB. The capability of the designed SMB in ensuring high purities and high yields was experimentally verified. Finally, we devised two potential strategies to make a further improvement in product concentrations and/or desorbent usage while keeping the purities and yields of fucose and BD almost unchanged. The first strategy was based on partial extract-collection and partial extract-discard, which was found to result in 33% higher BD product concentration. The second strategy was based on partial extract-collection, partial extract-recycle, and partial desorbent-port closing, which could lead to 25% lower desorbent usage, 33% higher BD product concentration, and 7% higher fucose product concentration.