Enrichment of Terbium(III) under synergistic effect of biosorption and biomineralization by Bacillus sp. DW015 and Sporosarcina pasteurii.

Biosorption and biomineralization are commonly used for the immobilization of metal ions. Biosorption is commonly used as a green method to enrich rare earth ions from wastewater. However, little attention has been paid to the facilitating role of biomineralization in the enrichment of rare earth ions. In this study, a strain of Bacillus sp. DW015, isolated from ion adsorption type rare earth ores and a urease-producing strain Sporosarcina pasteurii were used to enrich rare earth elements (REEs) from an aqueous solution. The results indicate that biomineralization accelerates the enrichment of Terbium(III) compared to biosorption alone. Kinetic analysis suggests that the main mode of action of DW015 was biosorption, following pseudo-second-order kinetics (R2 = 0.998). The biomineralization of DW015 did not significantly contribute to the enrichment of Tb(III), whereas excessive biomineralization of S. pasteurii led to a decrease in the enrichment of Tb(III). A synergistic system of biosorption and biomineralization was established by combining the two bacteria, with the optimal mixed bacteria (S. pasteurii:DW015) ratio being 1:19. This study provides fundamental support for the synergistic effect of biosorption and biomineralization and offers a new reference for future microbial-based enrichment methods. IMPORTANCE: A weak microbially induced calcium carbonate precipitation (MICP) promotes the enrichment of Tb(III) by bacteria, while a strong MICP leads to the release of Tb(III). However, existing explanations cannot elucidate these mechanisms. In this study, the morphology of the bioprecipitation and the degree of Tb(III) enrichment were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). The data revealed that MICP could drive stable attachment of Tb(III) onto the cell surface, forming a Tb-CaCO3 mixed solid phase. Excessive rapid rate of calcite generation could disrupt the Tb(III) adsorption equilibrium, leading to the release of Tb(III). Therefore, in order for Tb(III) to be stably embedded in calcite, it is necessary to have a sufficient number of adsorption sites on the bacteria and to regulate the rate of MICP. This study provides theoretical support for the process design of MICP for the enrichment of rare earth ions.

Recovery of terbium by Lysinibacillus sp. DW018 isolated from ionic rare earth tailings based on microbial induced calcium carbonate precipitation.

Microbial induced calcium carbonate precipitation (MICP) is considered as an environmentally friendly microbial-based technique to remove heavy metals. However, its application in removal and recovery of rare earth from wastewaters remains limited and the process is still less understood. In this study, a urease-producing bacterial strain DW018 was isolated from the ionic rare earth tailings and identified as Lysinibacillus based on 16S rRNA gene sequencing. Its ability and possible mechanism to recover terbium was investigated by using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and fourier transform infrared spectroscopy (FTIR). The results showed that the urease activity of DW018 could meet the biomineralization requirements for the recovery of Tb3+ from wastewaters. The recovery rate was as high as 98.28% after 10 min of treatment. The optimal conditions for mineralization and recovery were determined as a bacterial concentration of OD600 = 1.0, a temperature range of 35 to 40°C, and a urea concentration of 0.5%. Notably, irrespective of CaCO3 precipitation, the strain DW018 was able to utilize MICP to promote the attachment of Tb3+ to its cell surface. Initially, Tb3+ existed in amorphous form on the bacterial surface; however, upon the addition of a calcium source, Tb3+ was encapsulated in calcite with the growth of CaCO3 at the late stage of the MICP. The recovery effect of the strain DW018 was related to the amino, hydroxyl, carboxyl, and phosphate groups on the cell surface. Overall, the MICP system is promising for the green and efficient recovery of rare earth ions from wastewaters.

Antibacterial Carbon Dots-Based Composites.

The emergence and global spread of bacterial resistance to conventionally used antibiotics have highlighted the urgent need for new antimicrobial agents that might replace antibiotics. Currently, nanomaterials hold considerable promise as antimicrobial agents in anti-inflammatory therapy. Due to their distinctive functional physicochemical characteristics and exceptional biocompatibility, carbon dots (CDs)-based composites have attracted a lot of attention in the context of these antimicrobial nanomaterials. Here, a thorough assessment of current developments in the field of antimicrobial CDs-based composites is provided, starting with a brief explanation of the general synthesis procedures, categorization, and physicochemical characteristics of CDs-based composites. The many processes driving the antibacterial action of these composites are then thoroughly described, including physical destruction, oxidative stress, and the incorporation of antimicrobial agents. Finally, the obstacles that CDs-based composites now suffer in combating infectious diseases are outlined and investigated, along with the potential applications of antimicrobial CDs-based composites.

Multistage Photoactivatable Zinc-Responsive Nanodevices for Monitoring and Regulating Dysfunctional Islet ß-Cells.

The dysfunctional islet ß-cell triggered by excessive deposition of Zn2+ constituted a striking indicator of the occurrence of diabetic disease. However, it remained a formidable challenge to reflect the real-time function of ß-cell by monitoring the Zn2+ content. Herein, multistage photoactivatable Zn2+-responsive nanodevice (denoted as AD2@USD1) was presented for sensing, regulating, and evaluating Zn2+ levels in dysfunctional islet ß-cells. The photoactivated signatures on the satellite shell layer of the nanodevices and the internally loaded chelating factors effectively identified and intervened in the real-time concentration of Zn2+, the photothermal feedback component decorated on the inner core permitted the assessment of the post-intervention Zn2+ levels, achieving an integrated intervention and prognostic assessment in response to the abnormal islet ß-cell function induced by Zn2+ deposition. In this way, one strategy for sensing and regulating islet ß-cell function-oriented to Zn2+ was established. Our study introduced AD2@USD1 as a tool for effectively sensing, adjusting, and assessing the Zn2+ level in islet ß-cells with abnormalities, gaining a potential breakthrough in the treatment of diabetes.

CRISPR System-Linked Self-Assembling Nanoplatforms for Inspection and Screening of Gastric Cancer Stem Cells.

Cancer stem cells (CSCs) possess a high degree of plasticity, constituting a formidable challenge to identify and screen CSCs in situ with outstanding specificity and sensitivity. To overcome this limitation, a self-assembled heterodimer consisting of clustered regularly interspaced short palindromic repeats/Cas12a (named A-CCA) linkage is designed for in situ identification and screening of gastric CSCs (GCSCs) from gastric cancer cells (GCCs). In this system, the editable character of crRNA performs recognition of dual-targets in GCSCs, effectively boosting the specificity of identification, while the enzymatic reaction of Cas12a contributes meaningfully to the sensitivity of sensing, enabling in situ examination and screening of GCSCs. Specifically, the A-CCA nanoplatforms hybridized with ABCG 2 and ABCB 1 overexpress in GCSCs, which can generate heterodimers and simultaneously restore the function of trans-cleavage. At this time, the asymmetry of the heterodimer causes a circular dichroism signal, which together with the recovered fluorescence signal form a dual-signals output system that can further ensure the precision of screening GCSC. Therefore, fluorescence-enhanced GCSCs can be sorted out from GCCs by flow cytometry. Furthermore, GCSCs screened by this assay possess extremely aggressive tumorigenic efficiency, providing a fundamental research object for further developing CSC targeted drugs in vivo.

Result of a year-long animal survey in a state-owned forest farm in Beijing, China.

Background Artificial forest can have great potential in serving as habitat to wildlife, depending on different management methods. As the state-owned forest farms now play a new role in ecological conservation in China, the biological richness of this kind of land-use type is understudied. Once owned by a mining company, a largest state-owned forest farm, Jingxi Forest Farm, has been reformed to be a state-owned forest farm with the purpose of conservation since 2017. Although this 116.4 km2 forest farm holds a near-healthy montaine ecosystem very representative in North China, a large proportion of artificial coniferous forest in the forest farm has been proven to hold less biodiversity than natural vegetation. This situation, however, provides a great opportunity for ecological restoration and biodiversity conservation. Therefore, from November 2019 to December 2020, we conducted a set of biodiversity surveys, whose results will serve as a baseline for further restoration and conservation. New information Here, we report the result of a multi-taxa fauna diversity survey conducted in Jingxi Forest Farm mainly in year 2020 with explicit spatial information. It is the first survey of its kind conducted in this area, revealing a total of 19 species of mammals, 86 birds, four reptiles, two amphibians and one fish species, as well as 101 species of insects. Four species of mammals are identified as data-poor species as they have less than 100 occurrence records with coordination in the GBIF database. One species of insect, representing one new provincial record genus of Beijing, is reported.

Self-assembled nanomaterials for biosensing and therapeutics: recent advances and challenges.

Self-assembled nanomaterials (SANs) exhibit designable biofunctions owing to their tunable nanostructures and modifiable surface. Various constituent units and multi-dimensional structures of SANs provide unlimited possibilities for numerous applications. This review emphasizes the recent development of SANs in the fields of biosensing, bioimaging, and nano-drug engineering. The unit type, design concepts, material advantages, assembly driving force, nanostructure effects, drug loading performance, etc. are discussed and summarized. Finally, we briefly summarize how to assemble unique nanomaterials and point out the key challenges in this field.