RESUMEN
Heteropolypeptides bearing two or more functional side chains are promising polymeric materials for various biomedical applications. However, conventional preparation of heteropolypeptides relies on the synthesis and purification of each N-carboxyanhydride (NCA) monomer in a separate manner, which substantially increases the time and cost. Herein, we report the facile preparation of heteropolypeptides with up to 86% yield within several hours, which are obtained from a mixture of crude NCA monomers. The combination of n-hexane precipitation and biphasic segregation effectively removed >90% impurities from crude NCA mixtures, allowing for the successful polymerization process. Various heteropolypeptides with monomodal distribution and narrow dispersity were efficiently prepared, whose compositions were predetermined by the feeding ratios of amino acids. We believe that this work significantly simplifies the preparation of various heteropolypeptides, boosting the downstream studies of these promising materials.
RESUMEN
Anionic synthetic polypeptides are promising candidates as standalone bone-targeting drug carriers. Nevertheless, the structure-property relationship of the bone-targeting ability of polypeptides remains largely unexplored. Herein we report the optimization of the in vitro and in vivo bone-targeting ability of poly(glutamic acid)s (PGAs) by altering their chain lengths and backbone chirality. PGA 100-mers exhibited higher hydroxyapatite affinity in vitro, but their rapid macrophage clearance limited their targeting ability. Shorter PGA was therefore favored in terms of in vivo bone targeting. Meanwhile, the backbone chirality showed less significant impact on the in vitro and in vivo targeting behavior. This study highlights the modulation of structural parameters on the bone-targeting performance of anionic polypeptides, shedding light on the future design of polypeptide-based carriers.
Asunto(s)
Huesos , Ácido Poliglutámico , Ácido Poliglutámico/química , Ácido Poliglutámico/análogos & derivados , Animales , Huesos/efectos de los fármacos , Huesos/metabolismo , Ratones , Durapatita/química , Células RAW 264.7 , Portadores de Fármacos/química , Macrófagos/efectos de los fármacos , Macrófagos/metabolismoRESUMEN
This study addresses the understanding gap concerning the factors that influence the continuous learning intention of adult learners on online education platforms. The uniqueness and significance of this study stem from its dual focus on both platform features, such as service quality, and course features, including perceived interactivity and added value, aspects often overlooked in previous research. Rooted in Expectation Confirmation Theory, the study constructs a comprehensive model to shed light on the complex interplay of these factors. Empirical evidence collected from a survey of 1592 adult learners robustly validates the effectiveness of this model. The findings of the study reveal that platform service quality, perceived interactivity, and perceived added value significantly amplify adult learners' expectation confirmation and perceived usefulness. These elements subsequently enhance learner satisfaction, fostering their ongoing intention to use online education platforms. These insights offer practical guidance for online education providers, emphasizing the necessity to enhance platform service quality and course features to meet adult learners' expectations and perceived usefulness. The study provides valuable perspectives for devising strategies to boost user satisfaction and stimulate continuous usage intention among adult learners in the intensely competitive online education market. This study enriches the literature by uncovering the relationships among platform features, course features, expectation confirmation, perceived usefulness, and continuous usage intention. By proposing a comprehensive model, this study provides a novel theoretical basis for understanding how platform and course features impact adult learners' ongoing intention to use online education platforms, thereby aiding the evolution and refinement of relevant theories.
Asunto(s)
Educación a Distancia , Intención , Aprendizaje , Humanos , Educación a Distancia/métodos , Adulto , Femenino , Masculino , Adulto Joven , Encuestas y Cuestionarios , Estudiantes/psicología , Persona de Mediana Edad , InternetRESUMEN
The control over secondary structure has been widely studied to regulate the properties of polypeptide materials, which is used to change their functions in situ for various biomedical applications. Herein, we designed and constructed enzyme-responsive polypeptides as gating materials for mesoporous silica nanoparticles (MSNs), which underwent a distorted structure-to-helix transition to promote the release of encapsulated drugs. The polypeptide conjugated on the MSN surface adopted a negatively charged, distorted, flexible conformation, covering the pores of MSN to prevent drug leakage. Upon triggering by alkaline phosphatase (ALP) overproduced by tumor cells, the polypeptide transformed into positively charged, α-helical, rigid conformation with potent membrane-penetrating capabilities, which protruded from the MSN surface to uncover the pores. Such a transition thus enabled cancer-selective drug release and cellular internalization to efficiently kill tumor cells. This study highlights the important role of chain flexibility in modulating the biological function of polypeptides and provides a new application paradigm for synthetic polypeptides with secondary-structure transition.
Asunto(s)
Liberación de Fármacos , Nanopartículas , Péptidos , Dióxido de Silicio , Humanos , Péptidos/química , Nanopartículas/química , Dióxido de Silicio/química , Doxorrubicina/química , Doxorrubicina/farmacología , Fosfatasa Alcalina/metabolismo , Fosfatasa Alcalina/química , Preparaciones de Acción Retardada/química , Porosidad , Antineoplásicos/química , Antineoplásicos/farmacología , Estructura Secundaria de ProteínaRESUMEN
The manipulation of the flexibility/rigidity of polymeric chains to control their function is commonly observed in natural macromolecules but largely unexplored in synthetic systems. Herein, we construct a series of protein-mimetic nano-switches consisting of a gold nanoparticle (GNP) core, a synthetic polypeptide linker, and an optically functional molecule (OFM), whose biological function can be dynamically regulated by the flexibility of the polypeptide linker. At the dormant state, the polypeptide adopts a flexible, random-coiled conformation, bringing GNP and OFM in close proximity that leads to the "turn-off" of the OFM. Once treated with alkaline phosphatase (ALP), the nano-switches are activated due to the increased separation distance between GNP and OFM driven by the coil-to-helix and flexible-to-rigid transition of the polypeptide linker. The nano-switches therefore enable selective fluorescence imaging or photodynamic therapy in response to ALP overproduced by tumor cells. The control over polymer flexibility represents an effective strategy to manipulate the optical activity of nano-switches, which mimics the delicate structure-property relationship of natural proteins.
Asunto(s)
Oro , Nanopartículas del Metal , Péptidos/química , Estructura Secundaria de Proteína , PolímerosRESUMEN
Polysaccharide-polypeptide conjugates have gained a broad interest in mimicking the structure and bioactivity of peptidoglycans or proteoglycans for biomedical applications. Efficient and precise preparation of the conjugates is challenging and unresolved, mainly because of the mismatched solubility between polysaccharide initiators and N-carboxyanhydrides (NCAs), which frequently results in competing side reactions and oligomeric polypeptide chain. Herein, we report a facile and efficient strategy to prepare the conjugates with well-controlled polypeptide chain length (lp) directly from unmodified polysaccharides via a biphasic solution ring-opening polymerization. The effect of lp on surface antibacterial properties has been investigated. Elongating the lp can significantly potentiate the antibiofilm property of the conjugate coatings. Our results may provide opportunities to develop various polypeptide-based conjugates with well-defined structures toward versatile uses.
Asunto(s)
Péptidos , Polisacáridos , Péptidos/farmacología , Polimerizacion , Solubilidad , Propiedades de SuperficieRESUMEN
In cells, actin and tubulin polymerization is regulated by nucleation factors, which promote the nucleation and subsequent growth of protein filaments in a controlled manner. Mimicking this natural mechanism to control the supramolecular polymerization of macromolecular monomers by artificially created nucleation factors remains a largely unmet challenge. Biological nucleation factors act as molecular scaffolds to boost the local concentrations of protein monomers and facilitate the required conformational changes to accelerate the nucleation and subsequent polymerization. An accelerated assembly of synthetic poly(l-glutamic acid) into amyloid fibrils catalyzed by cationic silica nanoparticle clusters (NPCs) as artificial nucleation factors is demonstrated here and modeled as supramolecular polymerization with a surface-induced heterogeneous nucleation pathway. Kinetic studies of fibril growth coupled with mechanistic analysis demonstrate that the artificial nucleators predictably accelerate the supramolecular polymerization process by orders of magnitude (e.g., shortening the assembly time by more than 10 times) when compared to the uncatalyzed reaction, under otherwise identical conditions. Amyloid-like fibrillation was supported by a variety of standard characterization methods. Nucleation followed a Michaelis-Menten-like scheme for the cationic silica NPCs, while the corresponding anionic or neutral nanoparticles had no effect on fibrillation. This approach shows the effectiveness of charge-charge interactions and surface functionalities in facilitating the conformational change of macromolecular monomers and controlling the rates of nucleation for fibril growth. Molecular design approaches like these inspire the development of novel materials via biomimetic supramolecular polymerizations.
Asunto(s)
Amiloide , Péptidos , Amiloide/química , Proteínas Amiloidogénicas , Cinética , Péptidos/química , PolimerizacionRESUMEN
Multifunctional coatings have gained significant attention for their promising potential to address the issue of medical device-related infections. However, they usually have multiple components in one layer which decreases the density of functional groups on surfaces and hence reduces the biological properties. Herein, we report a mono-component and sulfonate-based anionic polypeptide coating with on-demand antibacterial activity, antifouling property, and biocompatibility. The anionic polypeptide was prepared by ring-opening polymerization of L-cysteine-based N-carboxyanhydride (NCA) with allyl groups and a subsequent thiol-ene reaction to incorporate the sulfonate pendants. It adopted a 17.1-19.5% ß-sheet conformation and self-assembled into a spherical nanoparticle. The polypeptide coating showed excellent in vitro antibacterial activity against both Gram-positive (i.e., S. aureus) and Gram-negative bacteria (i.e., E. coli) with >99% killing efficacy after acidic solution treatment and prominent antifouling property and biocompatibility after weak base treatment. An in vivo study revealed that the sulfonate-based polypeptide-coated polydimethylsiloxane (PDMS) exhibited good anti-infection property and histocompatibility.
Asunto(s)
Antiinfecciosos , Staphylococcus aureus , Antibacterianos/farmacología , Materiales Biocompatibles Revestidos , Escherichia coli , PéptidosRESUMEN
Recent years have seen increasing interests in the use of ring-opening polymerization of α-amino acid N-carboxyanhydrides (NCAs) to prepare synthetic polypeptides, a class of biocompatible and versatile materials, for various biomedical applications. Because of their rich side-chain functionalities, diverse hydrophilicity/hydrophobicity profiles, and the capability of forming stable secondary structures, polypeptides can assemble into a variety of well-organized nano-structures that have unique advantages in drug delivery and controlled release. Herein, we review the design and use of polypeptide-based drug delivery system derived from NCA chemistry, and discuss the future perspectives of this exciting and important biomaterial area that may potentially change the landscape of next-generation therapeutics and diagnosis. Given the high significance of precise control over release for polypeptide-based systems, we specifically focus on the versatile designs of drug delivery systems capable of programmed release, through the changes in the chemical and physical properties controlled by the built-in molecular structures of polypeptides.
Asunto(s)
Materiales Biocompatibles , Péptidos , Aminoácidos , Sistemas de Liberación de Medicamentos , PolimerizacionRESUMEN
With PEG-like properties, such as hydrophilicity and stealth effect against protein absorption, oligo(ethylene glycol) (OEG)-functionalized polypeptides have emerged as a new class of biomaterials alternative to PEG with polypeptide-like properties. Synthesis of this class of materials, however, has been demonstrated very challenging, as the synthesis and purification of OEG-functionalized N-carboxyanhydrides (OEG-NCAs) in high purity, which is critical for the success in polymerization, is tedious and often results in low yield. OEG-functionalized polypeptides are therefore only accessible to a few limited labs with expertise in this specialized NCA chemistry and materials. Here, we report the controlled synthesis of OEG-functionalized polypeptides in high yield directly from the OEG-functionalized amino acids via easy and reproducible polymerization of non-purified OEG-NCAs. The prepared amphiphilic block copolypeptides can self-assemble into narrowly dispersed nanoparticles in water, which show properties suitable for drug delivery applications.
Asunto(s)
Glicol de Etileno , Péptidos , Aminoácidos , Interacciones Hidrofóbicas e Hidrofílicas , PolimerizacionRESUMEN
The recent advances in accelerated polymerization of N-carboxyanhydrides (NCAs) enriched the toolbox to prepare well-defined polypeptide materials. Herein we report the use of crown ether (CE) to catalyze the polymerization of NCA initiated by conventional primary amine initiators in solvents with low polarity and low hydrogen-bonding ability. The cyclic structure of the CE played a crucial role in the catalysis, with 18-crown-6 enabling the fastest polymerization kinetics. The fast polymerization kinetics outpaced common side reactions, enabling the preparation of well-defined polypeptides using an α-helical macroinitiator. Experimental results as well as the simulation methods suggested that CE changed the binding geometry between NCA and propagating amino chain-end, which promoted the molecular interactions and lowered the activation energy for ring-opening reactions of NCAs. This work not only provides an efficient strategy to prepare well-defined polypeptides with functionalized C-termini, but also guides the design of catalysts for NCA polymerization.
RESUMEN
Antimicrobial peptides (AMPs) have been considered as a promising new tool to combat the antimicrobial resistance (AMR) crisis. However, the high toxicity and high cost of AMPs hampered their further development. Herein, a series of star poly(L-lysine) (PLL) homo- and copolymers with excellent antimicrobial activity and improved biocompatibility were prepared by the combination of ultra-fast ring opening polymerization (ROP) and side-chain modification. The amine-terminated polyamidoamine dendrimer (Gx-PAMAM) mediated ROP of Nε-tert-butyloxycarbonyl-L-lysine N-carboxyanhydride (Boc-L-Lys-NCA) and γ-benzyl-L-glutamic acid-based N-carboxyanhydride (PBLG-NCA) was able to prepare star PLL homo- and copolymers with 400 residues within 50 min. While the star PLL homopolymers exhibited low minimum inhibitory concentration (MIC = 50-200 µg mL-1) against both Gram-positive and Gram-negative bacteria (i.e., S. aureus and E. coli), they showed high toxicity against various mammalian cell lines. The star PLL copolymers with low contents of hydrophobic and hydroxyl groups showed enhanced antimicrobial activity (MIC = 25-50 µg mL-1) and improved mammalian cell viability. Both SEM and CLSM results indicated the antimicrobial mechanism of membrane disruption.
Asunto(s)
Antibacterianos , Antiinfecciosos , Animales , Antibacterianos/farmacología , Antiinfecciosos/farmacología , Escherichia coli , Bacterias Gramnegativas , Bacterias Grampositivas , Péptidos , Staphylococcus aureusRESUMEN
Non-viral gene delivery vectors with high transfection efficiency both in vitro and in vivo and low cytotoxicity are highly desirable for clinical applications. Herein, a series of guanidine-rich polypeptides bearing hydrophobic amino acid pendants was efficiently prepared via the 1,3-dipolar cycloaddition between azido decorated polypeptide and propargyl functionalized guanidinium and N-acetylamino acids. CD analysis indicated α-helical conformations of all resulting polypeptides in aqueous solution. The guanidine-rich polypeptide/DNA complexes showed significantly enhanced cellular internalization and high cell viability (>90%) in different mammalian cell lines (i.e., HeLa and RAW 264.7) at concentrations of the best performance. The top-performing guanidine-rich polypeptide containing 10% N-acetyl-l-valine pendants outperformed the commercial transfection reagent PEI by 400 times in vitro and 6 times in vivo. This study provides a new guidance for future molecular design of non-viral gene vectors with high delivery efficiency and low cytotoxicity.
Asunto(s)
Aminoácidos , Técnicas de Transferencia de Gen , Animales , Terapia Genética , Guanidina , Humanos , Péptidos , Polietileneimina , TransfecciónRESUMEN
The recent outbreaks of infectious diseases caused by multidrug-resistant pathogens have sounded a piercing alarm for the need of new effective antimicrobial agents to guard public health. Among different types of candidates, antimicrobial peptides (AMPs) and the synthetic mimics of AMPs (SMAMPs) have attracted significant enthusiasm in the past thirty years, due to their unique membrane-active antimicrobial mechanism and broad-spectrum antimicrobial activity. The extensive research has brought many drug candidates into clinical and pre-clinical development. Despite tremendous progresses have been made, several major challenges inherent to current design strategies have slowed down the clinical translational development of AMPs and SMAMPs. However, these challenges also triggered many efforts to redesign and repurpose AMPs. In this review, we will first give an overview on AMPs and their synthetic mimics, and then discuss the current status of their clinical translation. Finally, the recent advances in redesign and repurposing AMPs and SMAMPs are highlighted.
Asunto(s)
Péptidos Catiónicos Antimicrobianos/síntesis química , Péptidos/síntesis química , Péptidos Catiónicos Antimicrobianos/química , Diseño de Fármacos , Humanos , Péptidos/químicaRESUMEN
Infections by intracellular pathogens are difficult to treat because of the poor accessibility of antibiotics to the pathogens encased by host cell membranes. As such, a strategy that can improve the membrane permeability of antibiotics would significantly increase their efficiency against the intracellular pathogens. Here, we report the design of an adaptive, metaphilic cell-penetrating polypeptide (CPP)-antibiotic conjugate (VPP-G) that can effectively eradicate the intracellular bacteria both in vitro and in vivo. VPP-G was synthesized by attaching vancomycin to a highly membrane-penetrative guanidinium-functionalized metaphilic CPP. VPP-G effectively kills not only extracellular but also far more challenging intracellular pathogens, such as S. aureus, methicillin-resistant S. aureus, and vancomycin-resistant Enterococci. VPP-G enters the host cell via a unique metaphilic membrane penetration mechanism and kills intracellular bacteria through disruption of both cell wall biosynthesis and membrane integrity. This dual antimicrobial mechanism of VPP-G prevents bacteria from developing drug resistance and could also potentially kill dormant intracellular bacteria. VPP-G effectively eradicates MRSA in vivo, significantly outperforming vancomycin, which represents one of the most effective intracellular antibacterial agents reported so far. This strategy can be easily adapted to develop other conjugates against different intracellular pathogens by attaching different antibiotics to these highly membrane-penetrative metaphilic CPPs.
RESUMEN
Glatiramer acetate (GA), a linear random copolypeptide, is a first-line treatment for multiple sclerosis (MS). A major concern, however, is that GA treatment is associated with adverse effects and poor patient adherence due to the need for frequent injections. Here we describe improved performance of the polymeric drug, even at low doses with less-frequent injections, through the modification of its architecture into a star-shaped GA (sGA). In a sGA, multiple GAs are covalently linked onto a core, which greatly changes their properties such as molecular weight, size, and shape. The spherical sGA is retained longer in the body after intraperitoneal injection, and is more readily internalized by RAW 264.7 macrophage cells and bone marrow-derived dendritic cells than GA. In C57BL/6 mice induced with experimental autoimmune encephalitis, a mouse model for MS, sGA treatment exerts disease amelioration effect that is significantly better than that of GA despite a lower dose and less frequent injection. Moreover, spinal cord pathologies of demyelination and leukocyte infiltration are dramatically less pronounced in the sGA treatment condition compared to the GA treatment condition. Thus, we propose that sGA with a higher-ordered architecture offers an attractive and potentially viable treatment option for MS patients.
Asunto(s)
Encefalomielitis Autoinmune Experimental , Esclerosis Múltiple , Animales , Encefalomielitis Autoinmune Experimental/tratamiento farmacológico , Acetato de Glatiramer , Humanos , Ratones , Ratones Endogámicos C57BL , Esclerosis Múltiple/tratamiento farmacológico , PéptidosRESUMEN
Water-soluble polypeptides are a class of synthetic polymers with peptide bond frameworks imitating natural proteins and have broad prospects in biological applications. The regulation and dynamic transition of the secondary structures of water-soluble polypeptides have a great impact on their physio-chemical properties and biological functions. In this review article, we briefly introduce the current strategies to synthesize polypeptides and modulate their secondary structures. We then discuss the factors affecting the conformational stability/transition of polypeptides and the potential impact of side-chain functionalization on the ordered secondary structures, such as α-helix and ß-sheet. We then summarize the biological applications of water-soluble polypeptides such as cell penetration, gene delivery, and antimicrobial treatment, highlighting the important roles of ordered secondary structures therein.
Asunto(s)
Materiales Biocompatibles/química , Péptidos/química , Agua/química , Materiales Biocompatibles/síntesis química , Materiales Biocompatibles/farmacología , Péptidos/síntesis química , Péptidos/farmacología , Estructura Secundaria de Proteína , SolubilidadRESUMEN
Polypeptide micelles are widely used as biocompatible nanoplatforms but often suffer from their poor structural stability. Unimolecular polypeptide micelles can effectively address the structure instability issue, but their synthesis with uniform structure and well-controlled and desired sizes remains challenging. Herein we report the convenient preparation of spherical unimolecular micelles through dendritic polyamine-initiated ultrafast ring-opening polymerization of N-carboxyanhydrides (NCAs). Synthetic polypeptides with exceptionally high molecular weights (up to 85 MDa) and low dispersity (D < 1.05) can be readily obtained, which are the biggest synthetic polypeptides ever reported. The degree of polymerization was controlled in a vast range (25-3200), giving access to nearly monodisperse unimolecular micelles with predictable sizes. Many NCA monomers can be polymerized using this ultrafast polymerization method, which enables the incorporation of various structural and functional moieties into the unimolecular micelles. Because of the simplicity of the synthesis and superior control over the structure, the unimolecular polypeptide micelles may find applications in nanomedicine, supermolecular chemistry, and bionanotechnology.
Asunto(s)
Anhídridos/química , Péptidos/síntesis química , Micelas , Estructura Molecular , Tamaño de la Partícula , Péptidos/química , Polimerizacion , Propiedades de SuperficieRESUMEN
The performance of non-viral gene delivery vehicles, especially cationic polymers, is often challenged by the multiple cellular barriers that pose inconsistent requirements for material properties. A most pronounced inconsistency is exemplified by the molecular weight (MW)-related transfection efficiency and cytotoxicity. In this study, we report the development of photo-degradable, branched poly(ß-amino ester)s (BPAE-NB) to realize efficient and photo-controlled DNA and siRNA delivery. BPAE-NB possessing built-in light-responsive 2-nitrobenzene moieties in the polymer backbone was synthesized via the A2 (amine) + B3 (triacrylate) + C2 (diacrylate) polycondensation reaction from 4-amino-1-butanol (A2), trimethylolpropane triacrylate (B3), and (2-nitro-1,3-phenylene)bis(methylene) diacrylate (NPBMDA, C2). The highly branched BPAE-NB with the multivalent arrangement of cationic groups provides stronger nucleic acid binding capacity than its linear analogue LPAE-NB, and thus features stronger trans-membrane gene delivery capabilities and higher transfection efficiencies. Upon UV light irradiation, the backbone of BPAE-NB can quickly degrade into low-MW fragments as a consequence of the cleavage of the light-responsive 2-nitrobenzene, thus promoting intracellular gene release and diminishing the toxicity of materials at the post-transfection state. As such, in multiple mammalian cells, BPAE-NB exhibited remarkably higher DNA/siRNA transfection efficiency yet lower cytotoxicity than its non-responsive analogue BPAE-CC upon light irradiation, notably outperforming commercial reagents PEI 25k and Lipofectamine 2000. This study therefore provides an effective topology- and photo-controlled approach to precisely manipulate the transfection efficiency and toxicity of polycationic gene vectors, and may also provide promising additions to the existing non-viral gene delivery vectors.
Asunto(s)
ADN/metabolismo , Polímeros/química , ARN Interferente Pequeño/metabolismo , Transfección/métodos , Rayos Ultravioleta , Animales , Línea Celular , Supervivencia Celular/efectos de los fármacos , Chlorocebus aethiops , ADN/química , Humanos , Cinética , Ratones , Polímeros/metabolismo , Polímeros/toxicidad , Interferencia de ARN , ARN Interferente Pequeño/química , Survivin/antagonistas & inhibidores , Survivin/genética , Survivin/metabolismoRESUMEN
Enzymes provide optimal three-dimensional structures for substrate binding and the subsequent accelerated reaction. Such folding-dependent catalytic behaviors, however, are seldom mechanistically explored with reduced structural complexity. Here, we demonstrate that the α-helix, a much simpler structural motif of enzyme, can facilitate its own growth through the self-catalyzed polymerization of N-carboxyanhydride (NCA) in dichloromethane. The reversible binding between the N terminus of α-helical polypeptides and NCAs promotes rate acceleration of the subsequent ring-opening reaction. A two-stage, Michaelis-Menten-type kinetic model is proposed by considering the binding and reaction between the propagating helical chains and the monomers, and is successfully utilized to predict the molecular weights and molecular-weight distributions of the resulting polymers. This work elucidates the mechanism of helix-induced, enzyme-mimetic catalysis, emphasizes the importance of solvent choice in the discovery of new reaction type, and provides a route for rapid production of well-defined synthetic polypeptides by taking advantage of self-accelerated ring-opening polymerizations.