Unraveling the catalyst surface structure and behavior during reactions is essential for both mechanistic understanding and performance optimization. Here we report a phenomenon of facet-dependent surface restructuring intrinsic to ß-Ni(OH)2 catalysts during oxygen evolution reaction (OER), discovered by the correlative ex situ and operando characterization. The ex situ study after OER reveals ß-Ni(OH)2 restructuring at the edge facets to form nanoporous Ni1-xO, which is Ni deficient containing Ni3+ species. Operando liquid transmission electron microscopy (TEM) and Raman spectroscopy further identify the active role of the intermediate ß-NiOOH phase in both the OER catalysis and Ni1-xO formation, pinpointing the complete surface restructuring pathway. Such surface restructuring is shown to effectively increase the exposed active sites, accelerate Ni oxidation kinetics, and optimize *OH intermediate bonding energy toward fast OER kinetics, which leads to an extraordinary activity enhancement of â¼16-fold. Facilitated by such a self-activation process, the specially prepared ß-Ni(OH)2 with larger edge facets exhibits a 470-fold current enhancement than that of the benchmark IrO2, demonstrating a promising way to optimize metal-(oxy)hydroxide-based catalysts.
Designing high-performance thermal catalysts with stable catalytic sites is an important challenge. Conventional wisdom holds that strong metal-support interactions can benefit the catalyst performance, but there is a knowledge gap in generalizing this effect across different metals. Here, we have successfully developed a generalizable strong metal-support interaction strategy guided by Tammann temperatures of materials, enabling functional oxide encapsulation of transition metal nanocatalysts. As an illustrative example, Co@BaAl2O4 core@shell is synthesized and tracked in real-time through in-situ microscopy and spectroscopy, revealing an unconventional strong metal-support interaction encapsulation mechanism. Notably, Co@BaAl2O4 exhibits exceptional activity relative to previously reported core@shell catalysts, displaying excellent long-term stability during high-temperature chemical reactions and overcoming the durability and reusability limitations of conventional supported catalysts. This pioneering design and widely applicable approach has been validated to guide the encapsulation of various transition metal nanoparticles for environmental tolerance functionalities, offering great potential to advance energy, catalysis, and environmental fields.
We report a theoretical investigation of X-ray back diffraction at grazing incidence. Based on the framework of the dynamical theory of X-ray diffraction, the grazing incidence for Si (12 4 0) back diffraction is taken as an example to resolve the eigenvalue problem inside the crystal. The dispersion surface and the resulting diffraction intensities are strongly affected by the miscut angle as well as the diffraction geometry of grazing incidence. The kinematical relationship between the incident angle and the miscut angle is well explained by Snell's law. While only the two-beam diffraction is considered, our treatment can be further extended to include the cases for multiple diffractions as well.
High-entropy alloy (HEA) nanoparticles (NPs) have been emerging with superior compositional tunability and multielemental synergy, presenting a unique platform for material discovery and performance optimization. Here we report a synthetic approach utilizing hollow-carbon confinement in the ordinary furnace annealing to achieve the nonequilibrium HEA-NPs such as Pt0.45Fe0.18Co0.12Ni0.15Mn0.10 with uniform size â¼5.9 nm. The facile temperature control allows us not only to reveal the detailed reaction pathway through ex situ characterization but also to tailor the HEA-NP structure from the crystalline solid solution to intermetallic. The preconfinement of metal precursors is the key to ensure the uniform distribution of metal nanoparticles with confined volume, which is essential to prevent the thermodynamically favored phase separation even during the ordinary furnace annealing. Besides, the synthesized HEA-NPs exhibit remarkable activity and stability in oxygen reduction catalysis. The demonstrated synthetic approach may significantly expand the scope of HEA-NPs with uncharted composition and performance.
We present a new composite catalyst system of highly defective graphene quantum dots (HDGQDs)-doped 1T/2H-MoS2 for efficient hydrogen evolution reactions (HER). The high electrocatalytic activity, represented by an overpotential of 136.9 mV and a Tafel slope of 57.1 mV/decade, is due to improved conductivity, a larger number of active sites in 1T-MoS2 compared to that in 2H-MoS2, and additional defects introduced by HDGQDs. High-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, x-ray diffraction (XRD) and x-ray photoelectron spectroscopy (XPS) were used to characterize both the 1T/2H-MoS2 and GQDs components while Fourier-transform infrared spectroscopy (FTIR) was employed to identify the functional groups on the edge and defect sites in the HDGQDs. The morphology of the composite catalyst was also examined by field emission scanning electron microscopy (FESEM). All experimental data demonstrated that each component contributes unique advantages that synergistically lead to the significantly improved electrocatalytic activity for HER in the composite catalyst system.
The establishment of active sites as the frustrated Lewis pair (FLP) has recently attracted much attention ranging from homogeneous to heterogeneous systems in the field of catalysis. Their unquenched reactivity of Lewis acid and base pairs in close proximity that are unable to form stable adducts has been shown to activate small molecules such as dihydrogen heterolytically. Herein, we show that grafted Ru metal-organic framework-based catalysts prepared via N-containing linkers are rather catalytically inactive for H2 activation despite the application of elevated temperatures. However, upon light illumination, charge polarization of the anchored Ru bipyridine complex can form a transient Lewis acid-base pair, Ru+-N- via metal-to-ligand charge transfer, as confirmed by time-dependent density functional theory (TDDFT) calculations to carry out effective H2-D2 exchange. FTIR and 2-D NMR endorse the formation of such reactive intermediate(s) upon light irradiation.
Well dispersible and stable single atom catalysts (SACs) with hydrophilic features are highly desirable for selective hydrogenation reactions in hydrophilic solvents towards important chemicals and pharmaceutical intermediates. A general strategy is reported for the fabrication of hydrophilic SACs by cation-exchange approach. The cation-exchange between metal ions (M = Ni, Fe, Co, Cu) and Na+ ions introduced in the skeleton of metal oxide (TiO2 or ZrO2 ) nanoshells plays the key role in forming M1 /TiO2 and M1 /ZrO2 SACs, which efficiently prevents the aggregation of the exchanged metal ions. The as-obtained SACs are highly dispersible and stable in hydrophilic solvents including alcohol and water, which greatly facilitates the catalysis reaction in alcohol. The Ni1 /TiO2 SACs have been successfully utilized as catalysts for the selective C=C hydrogenation of cinnamaldehyde to produce phenylpropanal with 98% conversion, over 90% selectivity, good recyclability, and a turnover frequency (TOF) of 102 h-1 , overwhelming most reported catalysts including noble metal catalysts.
Alcohols , Oxides , Catalysis , Hydrogenation , Solvents
The design of efficient non-noble metal catalysts for CO2 hydrogenation to fuels and chemicals is desired yet remains a challenge. Herein, we report that single Mo atoms with a MoN3 (pyrrolic) moiety enable remarkable CO2 adsorption and hydrogenation to CO, as predicted by density functional theory studies and evidenced by a high and stable conversion of CO2 reaching about 30.4 % with a CO selectivity of almost 100 % at 500 °C and very low H2 partial pressure. Atomically dispersed MoN3 is calculated to facilitate CO2 activation and reduces CO2 to CO* via the direct dissociation path. Furthermore, the highest transition state energy in CO formation is 0.82â eV, which is substantially lower than that of CH4 formation (2.16â eV) and accounts for the dominant yield of CO. The enhanced catalytic performances of Mo/NC originate from facile CO desorption with the help of dispersed Mo on nitrogen-doped carbon (Mo/NC), and in the absence of Mo nanoparticles. The resulting catalyst preserves good stability without degradation of CO2 conversion rate even after 68â hours of continuous reaction. This finding provides a promising route for the construction of highly active, selective, and robust single-atom non-precious metal catalysts for reverse water-gas shift reaction.
We report an unconventional effect of synchrotron X-ray irradiation in which Co-O bonds in thermally annealed (Y, Co)-codoped CeO2 nanocrystal samples were formed due to, instead of broken by, X-ray irradiation. Our experimental data indicate that escaping oxygen atoms from X-ray-broken Ce-O bonds may be captured by Co dopant atoms to form additional Co-O bonds. Consequently, the Co dopant atoms were pumped by X-rays from the energetically-favored thermally-stable Co-O4 square-planar structure to the metastable octahedral Co-O6 environment, practically a reversal of thermal annealing effects in (Y, Co)-codoped CeO2 nanocrystals. The band gap of doped CeO2 with Co dopant in the Co-O6 structure was previously found to be 1.61 eV higher than that with Co in the Co-O4 environment. Therefore, X-ray irradiation can work with thermal annealing in opposing directions to fine tune and optimize the band gap of the material for specific technological applications.
Nanoplastics are now found in some environmental media and consumer products. However, very limited data on nanoplastics are available for one of the main human consumption sources of microplastics: seafood. Unlike microplastics, a method for extracting nanoplastics from seafood is still lacking. Herein, a combination of common extraction techniques including enzymatic digestion, sequential membrane filtration, centrifugal concentration, and purification (dialysis and sodium dodecylsulfate (SDS) incubation), was developed to extract nanoplastics from oyster and fish tissues. Corolase with subsequent lipase treatment achieved the highest digestion efficiencies (88- 89%) for non-homogenized tissues compared to other proteases and additional cellulase or H2O2 treatment. With the exception of polyethylene terephthalate (PET), enzymatic digestion did not change the morphology or structure of polyvinyl chloride (PVC), polyethylene (PE), or polystyrene (PS) nanoplastic particles, and the subsequent extraction procedures had good recoveries of 71- 110% for fluorescence-labeled 76-nm PVC and 100- and 750-nm PS, as validated by a Nanoparticle Tracking Analysis (NTA). Few of the 1011 digested residual particles of 150- 300 nm in diameter per oyster or per serving of fish tissue were left in the method blank. Consequently, this efficient approach could be used as a pretreatment protocol for current potential nanoplastic detection methods.
Microplastics , Ostreidae , Animals , Humans , Hydrogen Peroxide , Plastics , Polystyrenes/analysis , Renal Dialysis , Seafood
Hydrogen spillover is the phenomenon where a hydrogen atom, generated from the dissociative chemisorption of dihydrogen on the surface of a metal species, migrates from the metal to the catalytic support. This phenomenon is regarded as a promising avenue for hydrogen storage, yet the atomic mechanism for how the hydrogen atom can be transferred to the support has remained controversial for decades. As a result, the development of catalytic support for such a purpose is only limited to typical reducible oxide materials. Herein, by using a combination of in situ spectroscopic and imaging technique, we are able to visualize and observe the atomic pathway for which hydrogen travels via a frustrated Lewis pair that has been constructed on a nonreducible metal oxide. The interchangeable status between the hydrogen, proton, and hydride is carefully characterized and demonstrated. It is envisaged that this study has opened up new design criteria for hydrogen storage material.
Transition metal doped chalcogenides are one of the most important classes of catalysts that have been attracting increasing attention for petrochemical and energy related chemical transformations due to their unique physiochemical properties. For practical applications, achieving maximum atom utilization by homogeneous dispersion of metals on the surface of chalcogenides is essential. Herein, we report a detailed study of a deposition method using thiourea coordinated transition metal complexes. This method allows the preparation of a library of a wide range of single atoms including both noble and non-noble transition metals (Fe, Co, Ni, Cu, Pt, Pd, Ru) with a metal loading as high as 10 wt % on various ultrathin 2D chalcogenides (MoS2, MoSe2, WS2 and WSe2). As demonstrated by the state-of-the-art characterization, the doped single transition metal atoms interact strongly with surface anions and anion vacancies in the exfoliated 2D materials, leading to high metal dispersion in the absence of agglomeration. Taking Fe on MoS2 as a benchmark, it has been found that Fe is atomically dispersed until 10 wt %, and beyond this loading, formation of coplanar Fe clusters is evident. Atomic Fe, with a high electron density at its conduction band, exhibits a superior intrinsic activity and stability in CO2 hydrogenation to CO per Fe compared to corresponding surface Fe clusters and other Fe catalysts reported for reverse water-gas-shift reactions.
We report the experimental observation of and theoretical explanation for the reduction of dopant ions and enhancement of magnetic properties in Ce-doped TiO2 diluted magnetic semiconductors from UV-light irradiation. Substantial increase in Ce3+ concentration and creation of oxygen vacancy defects in the sample due to UV-light irradiation was observed by X-ray and optical methods. Magnetic measurements demonstrate a combination of paramagnetism and ferromagnetism up to room temperatures in all samples. The magnetization of both paramagnetic and ferromagnetic components was observed to be dramatically enhanced in the irradiated sample. First-principle theoretical calculations show that valence holes created by UV irradiation can substantially lower the formation energy of oxygen vacancies. While the electron spin densities for defect states near oxygen vacancies in pure TiO2 are in antiferromagnetic orientation, they are in ferromagnetic orientations in Ce-doped TiO2. Therefore, the ferromagnetically-oriented spin densities near oxygen vacancies created by UV irradiation are the most probable cause for the experimentally observed enhancement of magnetism in the irradiated Ce-doped TiO2.
Precisely tuning the nuclearity of supported metal nanoclusters is pivotal for designing more superior catalytic systems, but it remains practically challenging. By utilising the chemical and molecular specificity of UiO-66-NH2 (a Zr-based metal-organic framework), we report the controlled synthesis of supported bi- and trinuclear Cu-oxo nanoclusters on the Zr6O4 nodal centres of UiO-66-NH2. We revealed the interplay between the surface structures of the active sites, adsorption configurations, catalytic reactivities and associated reaction energetics of structurally related Cu-based 'single atoms' and bi- and trinuclear species over our model photocatalytic formic acid reforming reaction. This work will offer practical insight that fills the critical knowledge gap in the design and engineering of new-generation atomic and nanocluster catalysts. The precise control of the structure and surface sensitivities is important as it can effectively lead to more reactive and selective catalytic systems. The supported bi- and trinuclear Cu-oxo nanoclusters exhibit notably different catalytic properties compared with the mononuclear 'Cu1' analogue, which provides critical insight for the engineering of more superior catalytic systems.
We investigate the geometric and electronic properties of single-atom catalysts (SACs) within metal-organic frameworks (MOFs) with respect to electrocatalytic CO2 reduction as a model reaction. A series of mid-to-late 3d transition metals have been immobilised within the microporous cavity of UiO-66-NH2. By employing Rietveld refinement of new-generation synchrotron diffraction, we not only identified the crystallographic and atomic parameters of the SACs that are stabilised with a robust MN(MOF) bonding of ca. 2.0 Å, but also elucidated the end-on coordination geometry with CO2. A volcano trend in the FEs of CO has been observed. In particular, the confinement effect within the rigid MOF can greatly facilitate redox hopping between the Cu SACs, rendering high FEs of CH4 and C2H4 at a current density of -100 mA cm-2. Although only demonstrated in selected SACs within UiO-66-NH2, this study sheds light on the rational engineering of molecular interactions(s) with SACs for the sustainable provision of fine chemicals.
There is increasing interest in capturing H2 generated from renewables with CO2 to produce methanol. However, renewable hydrogen production is expensive and in limited quantity compared to CO2 . Excess CO2 and limited H2 in the feedstock gas is not favorable for CO2 hydrogenation to methanol, causing low activity and poor methanol selectivity. Now, a class of Rh-In catalysts with optimal adsorption properties to the intermediates of methanol production is presented. The Rh-In catalyst can effectively catalyze methanol synthesis but inhibit the reverse water-gas shift reaction under H2 -deficient gas flow and shows the best competitive methanol productivity under industrially applicable conditions in comparison with reported values. This work demonstrates a strong potential of Rh-In bimetallic composition, from which a convenient methanol synthesis based on flexible feedstock compositions (such as H2 /CO2 from biomass derivatives) with lower energy cost can be established.
We report for the first time the facile synthesis of Sb single atoms supported on N-doped porous carbon. As compared to bulk Sb, Sb2O3, and Sb nanoparticles, that exhibit poor electrocatalytic CO2 reduction activity, the as-prepared Sb atomic sites enable efficient aqueous electroreduction of CO2 to CO with a high CO turnover frequency exceeding 16 500 h-1 at -0.9 V (versus the reversible hydrogen electrode), outperforming many other single atom electrocatalysts reported thus far.
Ultraviolet (UV) light irradiation on CeO2 nanocrystals catalysts has been observed to largely increase the material's catalytic activity and reactive surface area. As revealed by x-ray absorption near edge structure (XANES) analysis, the concentration of subvalent Ce3+ ions in the irradiated ceria samples progressively increases with the UV-light exposure time. The increase of Ce3+ concentration as a result of UV irradiation was also confirmed by the UV-vis diffuse reflectance and photoluminescence spectra that indicate substantially increased concentration of oxygen vacancy defects in irradiated samples. First-principle formation-energy calculation for oxygen vacancy defects revealed a valence-hole-dominated mechanism for the irradiation-induced reduction of CeO2 consistent with the experimental results. Based on a Mars-van Krevelen mechanism for ceria catalyzed oxidation processes, as the Ce3+ concentration is increased by UV-light irradiation, an increased number of reactive oxygen atoms will be captured from gas-phase O2 by the surface Ce3+ ions, and therefore leads to the observed catalytic activity enhancement. The unique annealing-free defect engineering method using UV-light irradiation provides an ultraconvenient approach for activity improvement in nanocrystal ceria for a wide variety of catalytic applications.
Designing a MoS2 catalyst having a large number of active sites and high site activity enables the catalytic activity toward the hydrogen evolution reaction to be improved. Herein, we report the synthesis of a low-cost and catalytically active immobilized single molecular molybdenum disulfide on carbonized polyacrylonitrile (MoS2-cPAN) electrocatalyst. From the extended X-ray absorption fine structure spectra analysis, we found that the as-prepared material has no metal-metal scattering and it resembles MoS2 with a molecular state. Meanwhile, the size of the molecular MoS2 has been estimated to be about 1.31 nm by high-angle annular dark-field scanning transmission electron microscopy. A low coordination number and maximum utilization of the single molecular MoS2 surface enable MoS2-cPAN to demonstrate electrochemical performance significantly better than that of bulk MoS2 by two orders of exchange current density ( jo) and turnover frequency to the hydrogen evolution.
