RESUMEN
This study aimed to modify the sensory properties of rapeseed protein concentrate using a combination of fermentation and high-moisture extrusion processing for producing meat analogues. The fermentation was carried out with Lactiplantibacillus plantarum and Weissella confusa strains, known for their flavour and structure-enhancing properties. Contrary to expectations, the sensory evaluation revealed that the fermentation induced bitterness and disrupted the fibrous structure formation ability due to the generation of short peptides. On the other hand, fermentation removed the intensive off-odour and flavour notes present in the native raw material. Several control treatments were produced to understand the reasons behind the hindered fibrous structure formation and induced bitterness. The results obtained from peptidomics, free amino ends, and solubility analyses strongly indicated that the proteins were hydrolysed by endoproteases activated during the fermentation process. Furthermore, it was suspected that the proteins and/or peptides formed complexes with other components, such as hydrolysis products of glucosinolates and polysaccharides.
Asunto(s)
Brassica napus , Brassica rapa , Fermentación , Sustitutos de la Carne , Polisacáridos , Concentración de Iones de HidrógenoRESUMEN
Little is known about how plant-based products influence satiation compared to corresponding meat-based products. As augmented reality (AR) intensifies sensory experiences, it was hypothesized to improve satiation. This study compared satiation between intake of meatballs and plant-based balls and plant-based balls intensified with AR for visual, olfactory, and haptic sensory properties. Intake order of the meatballs, plant-based balls, and augmented plant-based balls, eaten on separate days, was randomized. Satiation was measured from twenty-eight non-obese adults as ad libitum intake of the balls and extra snacks, and as subjective appetite sensations. Liking and wanting to eat the products were also investigated. There were no differences between the products in satiation. Before tasting the augmented plant-based balls were less liked than the meatballs (p = 0.002) or plant-based balls (p = 0.046), but after eating the first ball or eating the ad libitum number of balls the differences in liking disappeared. Wanting evaluations were similar for each product and decreased during eating (p < 0.001). A group of participants susceptible to AR was found (n = 11), described by decreased intake when augmentation was applied. Among the sub-group, wanting to eat the augmented balls was lower before tasting (p = 0.019) and after eating the first ball (p = 0.002) and appetite was less suppressed after eating the balls ad libitum (p = 0.01), when compared to non-susceptible participants. We conclude that meatballs and plant-based balls were equal in inducing satiation, and multisensory augmentation did not influence satiation. However, the augmentation decreased liking evaluations before tasting. Further studies are needed to explore differences between consumer groups in susceptibility to augmentation.
Asunto(s)
Ingestión de Alimentos , Saciedad , Adulto , Humanos , Apetito , Percepción del Gusto , Carne , Ingestión de EnergíaRESUMEN
Extrusion-based 3D food printing can be used as an alternative structuring technique to traditional extrusion processing for creating meat-like structures. This study focused on 3-D food printing to generate structures analogous to meat by using various combinations of texturized pea protein fibrils, microbial Single Cell Protein (SCP) and hydrocolloids locust bean gum and/or sodium alginate. Simple moulding was utilized as benchmarking to better understand the 3D printing-induced structural effects. To gain understanding of the interactions between proteins of different origin (plant and SCP) and with hydrocolloids, structural, textural and rheological properties were analysed. Oscillatory stress sweeps of all printing pastes revealed elastic-dominant rheological behaviour (G' 4000-6000 Pa) with a defined yield stress (25-60 Pa) explaining their printability and shape stability. X-ray microtomography of ion-crosslinked analogues showed a printing-induced preferential alignment of fibrils in the direction of nozzle movement, while moulding led to a random orientation. Textural characterization via bi-directional cutting tests demonstrated higher cutting force in transversal (FT) over longitudinal (FL) direction in 3D-printed samples and equal forces in moulded samples. The anisotropy index (AI = FT/FL) of printed samples ranged between 1.4 and 2.5, indicating anisotropic texture, and 0.8-1 for moulded samples indicating isotropic texture. This study demonstrated the applicability of paste-extrusion in generating anisotropic structures analogous to meat by process-induced fibril alignment. The results support further development of 3D food printing technology in design of sustainable meat alternatives resembling whole-muscle meat.
Asunto(s)
Carne , Pisum sativum , Proteínas en la Dieta , ColoidesRESUMEN
Current patterns of meat consumption are considered unsustainable. Plant-based products are presented as a solution. However, while some plant-based products thrive, others do not make the cut due to the information "framing" effect issues related to the way information is presented to the consumers. Information on the nutrition and health properties of food products are usually made available at the point of purchase, but their effect on consumer product evaluation and subsequent purchase intent can also occur later, during or after consumption. This research demonstrates that the effect of nutrition information on product evaluation and purchase intention depends on when such information is made available-before first tasting or after first tasting-and that the information interacts with the taste experience in its effect on product evaluation and subsequent purchase intent. Using three plant-based products as an example, we conducted a cross-cultural experimental sensory evaluation with temporal order of information as the main between-subject experimental condition (informed before taste vs. informed after taste vs. control condition), and product experience phase (expectation vs. experience vs. post-experience phase) and information content as within-subject conditions. Information content had two levels: lower vs. higher share of oat protein in the product (i.e., source of protein vs. high in protein). The results indicate that information generally increases consumers' purchase intentions with information before tasting having a higher weight when compared to the condition when information was presented after tasting. Presenting the information before tasting also mitigates a drop in the evaluation of taste after tasting, observed in the two other conditions. Further, taste acts as a healthiness cue, but the direction of the inference depends on the availability of health-related information: tasting in the informed condition increased the healthiness perception, whereas tasting in the uninformed condition had the opposite effect. Giving the information before the first tasting also increased the weight of healthiness as compared to taste in the formation of purchase intentions. These findings contribute to a better understanding of the effect of temporal order of information and product tasting have on the consumers' product evaluations of plant-based products from theoretical and managerial perspectives.
RESUMEN
This study investigated the effect of pH on fibrous structure formation (protein alignment) during high-moisture extrusion processing of gluten, rice protein, as well as pea protein concentrate, and isolate. The pH of the raw material was shifted to 5 and 7 in water suspension with an acid or base and freeze-dried, after which, conductivity, solubility, water-holding capacity, particle size, and pH were measured. The pH-shifted raw materials were extruded at various temperatures (95-160 °C) and the extrudates were analysed for protein alignment (macro and microstructure), tensile strength, free thiol groups, and cooking properties. In general, all raw materials generated fibrous structure at lower temperatures (115-140 °C) at pH 7 than at pH 5 (135-160 °C). Higher pH and temperature values led to an increased tensile strength and pronounced protein alignment. No such unambiguous link could be observed between the raw material properties and enhanced structure formation. This study showed that the structure formation of the extrudate can be positively influenced by increasing the pH of the raw material, which facilitates the plant protein structuring into appealing meat analogue products.
Asunto(s)
Manipulación de Alimentos , Proteínas de Plantas , Concentración de Iones de Hidrógeno , Temperatura , AguaRESUMEN
Cereal grains are the main dietary source of energy, carbohydrates, and plant proteins world-wide. Currently, only 41% of grains are used for human consumption, and up to 35% are used for animal feed. Cereals have been overlooked as a source of environmentally sustainable and healthy plant proteins and could play a major role in transitioning towards a more sustainable food system for healthy diets. Cereal plant proteins are of good nutritional quality, but lysine is often the limiting amino acid. When consumed as whole grains, cereals provide health-protecting components such as dietary fiber and phytochemicals. Shifting grain use from feed to traditional foods and conceptually new foods and ingredients could improve protein security and alleviate climate change. Rapid development of new grain-based food ingredients and use of grains in new food contexts, such as dairy replacements and meat analogues, could accelerate the transition. This review discusses recent developments and outlines future perspectives for cereal grain use.
Asunto(s)
Fibras de la Dieta , Grano Comestible , Fibras de la Dieta/análisis , Grano Comestible/química , Humanos , Valor Nutritivo , Proteínas de Plantas , Granos EnterosRESUMEN
3D food printing is an emerging food technology innovation that enables the personalization and on-demand production of edible products. While its academic and industrial relevance has increased over the past decade, the functional value of the technology remains largely unrealized on a commercial scale. This study aimed at updating the business outlook of 3D food printing so as to help entrepreneurs and researchers in the field to channel their research and development (R&D) activities. A three-phase mixed methods approach was utilized to gain perspectives of industrial experts, researchers, and potential consumers. Data were collected from two sets of interviews with experts, a survey with experts, and consumer focus group discussions. The results gave insights into key attributes and use cases for a 3D food printer system, including the techno-economic feasibility and consumer desirability of identified use cases. A business modelling workshop was then organized to translate these results into three refined value propositions for 3D food printing. Both the experts and consumers found personalized nutrition and convenience to be the most desirable aspects of 3D food printing. Accordingly, business models related to 3D printed snacks/meals in semi-public spaces such as fitness centers and hospitals were found to offer the highest business potential. While the technology might be mature enough at component level, the successful realization of such high-reward models however would require risk-taking during the developmental phase.
RESUMEN
High insoluble dietary fibre content causes challenges with structure and texture in extrusion. This paper focused on studying the structure of extrudate enriched with rye bran modified in different ways. Fermentation of rye bran with dextran-producing Weissella confusa (with 10 g/100 g, 5 g/100 g and 0 g/100 g added sucrose as substrate for dextran production), in situ enzymatic production of dextran in the bran and chemical acidification of bran with lactic acid were compared in extrusion trials. Endosperm rye flour was the base in extrusion, of which 32 g/100 g was substituted for rye bran. Fermentation with dextran production showed similar improvement in extrudate expansion as chemically acidified bran samples (489 and 493%), in comparison with native bran (420%). Similarly, these treatments decreased extrudate hardness and increased crispiness index (CI) (16 N, 0.06 and 14 N, 0.071 respectively) compared to the control (39 N, 0.008). Enzymatically produced dextran did not affect expansion, although it decreased hardness (26 N) and increased CI compared to the control (0.023). Chemical changes in the fermented and acidified rye bran included reduction in insoluble dietary fibre (DF) (19 g/100 g â 17 g/100 g) and increase in soluble DF (5.17 g/100 g â 5.51-7.19 g/100 g), as well as soluble protein (8 g/100 g â 11 g/100 g) content. Lactic acid bacteria fermentation or acidification is therefore a promising method to increase the functionality of rye bran in extrusion.
Asunto(s)
Dextranos , Secale , Fibras de la Dieta , Concentración de Iones de Hidrógeno , WeissellaRESUMEN
This study addressed the potential of 3D printing as a processing technology for delivering personalized healthy eating solutions to consumers. Extrusion-based 3D printing was studied as a tool to produce protein- and dietary fibre-rich snack products from whole milk powder and wholegrain rye flour. Aqueous pastes were prepared from the raw materials at various ratios, grid-like samples printed from the pastes at ambient temperature and the printed samples post-processed by oven baking at 150 °C. Printing pastes were characterized by rheological measurements and the baked samples by X-ray micro tomography, texture measurements and sensory analysis. All formulations showed good printability and shape stability after printing. During baking, the milk powder-based samples expanded to a level that caused a total collapse of the printed multiple-layer samples. Shape retention during baking was greatly improved by adding rye flour to the milk formulation. Sensory evaluation revealed that the volume, glossiness, sweetness and saltiness of the baked samples increased with an increasing level of milk powder in the printing paste. A mixture of milk powder and rye flour shows great potential as a formulation for healthy snack products produced by extrusion-based 3D printing.
RESUMEN
The aim of the study was to evaluate consumer perceptions toward customized snacks produced with a Healthy Snack Machine (HSM) prototype, at-site of the purchase and consumption. The present study had a multi-disciplinary approach including both snack product and HSM development (hardware and user interface). Snack development included both instrumental (viscosity, colloidal stability) and sensory characterization (by trained sensory (N = 10) and consumer (N = 55) panels) of spoonable and drinkable, oat- and dairy-based snack products, fortified with protein and/or dietary fiber. The protein and fiber addition reduced viscosity in spoonable products but did not affect the consistency of drinkable samples. Oat-based samples differed from dairy-based in multiple attributes in sensory profiling. In consumer sample testing, sample odor and taste were the most and least preferred aspects, respectively. In the snack machine testing, a qualitative consumer study (N = 33) showed that the HSM was easy to use, the user interface was clear, the ordering process was quick, and the participants were interested in using the HSM in the future. The snack choices (spoonable/drinkable and dairy/oat base) made by the consumers were distributed equally, but the berry-flavor was preferred over cocoa and vanilla. The most common HSM usage scenarios were "between work/school and hobbies" and "in transit from one place to another".
RESUMEN
Ultrasonication alone or in combination with a pH-shifting method could be applied as means for improving the techno-functional properties and performance of barley protein ingredients in liquid food matrix. Ultrasound technology was utilised with and without pH-shifting to 3, 7 and 9 aiming at investigating their impact on primary protein structure, protein solubility, particle size and colloidal stability of an air-classified protein-enriched barley fraction and a barley protein isolate. Shifting the pH of sample dispersion to 9 followed by neutralisation to pH 7 improved protein solubility and colloidal stability of the isolate whereas it had less impact on the protein-enriched fraction. Ultrasound treatment improved both protein solubility and colloidal stability of the protein-enriched fraction at alkaline pH and particle size reduction by ultrasonication was observed at all the studied pH-values. For protein isolate, ultrasonication improved protein solubility at all pH-values and colloidal stability was improved at acidic and neutral pH whereas the sample was inherently stable at alkaline pH. The protein profiles of both ingredients remained unaffected by ultrasound treatment. The results suggest adopting ultrasonication as a promising tool for improving applicability of barley protein ingredients in liquid food systems.
RESUMEN
Lactic acid fermentation could be used as a potential modification tool for faba bean flour to enable its incorporation in boosting the nutritional profile of gluten-free breads. Gluten-free breads made with fermented or unfermented faba bean flours were compared with commercial soy flour. The amounts of faba- and soy-bean flours were adjusted to obtain the same protein content in bread (16%). Both fermented and unfermented faba bean flour resulted in larger bread volume (2.1 mL/g and 2.4 mL/g, respectively) compared to bread made with soybean flour (1.5 mL/g). Breads made with unfermented and fermented faba flour had higher porosity (82% and 72%, respectively) than bread with soy flour (61%). The faba breads also were softer than the soy bread. Fermentation of faba flour prior to bread making significantly increased crumb hardness (584 vs. 817 g). Fermentation increased in vitro protein digestibility (72.3% vs. 64.8%). Essential Amino Acid and Biological Value indexes were significantly higher for breads containing fermented faba flour compared to breads made with unfermented faba and soy flour. The Protein Efficiency Ratio and Nutritional Index increased by fermentation from 33 to 36 and 1.6 to 2.7, respectively. Pre-fermentation of faba bean flour improved the nutritional properties of high-protein, gluten-free faba bread. A sensory panel indicated that fermentation did not affect the crumbliness, evenness of pore size and springiness of breadcrumb.
RESUMEN
BACKGROUND: During the industrial production of ß-glucan, a protein-rich fraction remains as a by-product. Recovery of this protein as oat protein concentrate (OPC) results in a source of cereal protein for food and improves the overall economy of the process. In this study, a yoghurt-type product is developed by lactic acid fermentation of an OPC suspension after subjection to heat treatment to assure starch gelatinization. RESULTS: In detail, the process of yoghurt production involved an initial heating step to 90 °C, followed by 24 h fermentation with a starter culture consisting of Lactobacillus delbrueckii subsp. bulgaricus und Streptococcus thermophilus. The resulting yoghurt-type product was mildly sour (pH 4.2) with a certain amount of lactic acid (3.3 ± 0.2 g kg-1 ) and contained 4.9 × 106 cfu g-1 lactobacillus after 24 h fermentation. Scanning electron microscopy revealed a porous network presumably built up from the gelatinized starch fraction containing aggregated structures, between which were assumed to be aggregated oat proteins. Moreover, to a limited extent, proteolysis occurred during fermentation. Thus some of the proteolytic enzymes present in the yoghurt culture cleaved oat protein and released peptides. However, the effect on essential amino acids was small. CONCLUSION: The results of this study provide a deeper knowledge into the role of starch and protein in fermented OPC yoghurts. The structure of fermented OPC verifies the applicability of oat protein as an alternative source for yoghurt-type products. © 2019 Society of Chemical Industry.
Asunto(s)
Avena/metabolismo , Aditivos Alimentarios/análisis , Manipulación de Alimentos/métodos , Lactobacillus delbrueckii/metabolismo , Proteínas de Plantas/análisis , Streptococcus thermophilus/metabolismo , Yogur/análisis , Aminoácidos Esenciales/análisis , Aminoácidos Esenciales/metabolismo , Avena/química , Avena/microbiología , Fermentación , Aditivos Alimentarios/metabolismo , Ácido Láctico/análisis , Ácido Láctico/metabolismo , Proteínas de Plantas/metabolismo , Yogur/microbiologíaRESUMEN
The snack product category is lacking palatable, high dietary fiber containing products. This study explored how the addition of native or fermented rye bran influences the texture and sensory properties of endosperm rye flour based extrudates. In addition, mastication and bolus properties (n = 26), and in vitro starch digestibility were assessed. Three high fiber extrudates based on endosperm rye flour (EF) were produced with addition of either 40% native rye bran (NBE) or 40% fermented rye bran (FBE), and with no added bran (EFE) to achieve two pairs of extrudates to compare. EFE and FBE had different composition but resembled each other regarding macrostructure and the second pair (NBE vs. FBE) had similar core composition but different structure due to bran fermentation. The fermentation of bran was performed using exopolysaccharide (EPS)-producing strain Weissella confusa, which led to 3% (3 g per 100 g bran; dry weight) in situ dextran production. The compositionally similar extrudates (NBE vs. FBE) varied in both structure and instrumental texture: FBE were less dense, less hard and crispier than NBE. The extrudates with different composition (EFE vs. FBE) varied regarding instrumental texture: FBE were less hard and crispier than EFE. There were also subtle structural differences FBE being somewhat denser than EFE. NBE and FBE differed regarding sensory texture while textures of EFE and FBE were perceived similar. Mastication properties of the different products did not exhibit remarkable differences. There was a large number of smaller particles in both NBE and FBE bolus samples. The fragile structure of FBE, and its lower bolus viscosity, led to high in vitro starch digestibility. The results demonstrate that the structural attributes of the extrudates, rather than the core composition, dictate the breakdown pattern during mastication and in vitro starch digestibility. The extrudates with similar composition may be digested at different rates depending on their structural attributes. Although FBE had higher in vitro starch digestibility, its high DF content, palatable texture and improved sensory properties were important determinants underlying eating quality and therefore it could be a promising product to snack food category.
Asunto(s)
Fibras de la Dieta/análisis , Fibras de la Dieta/metabolismo , Secale/química , Almidón/metabolismo , Adulto , Digestión , Femenino , Fermentación , Harina/análisis , Dureza , Humanos , Masticación , Secale/metabolismo , Semillas/química , Semillas/metabolismo , Bocadillos , Gusto , Weissella/metabolismo , Adulto JovenRESUMEN
Water suspensions of cellulose nanofibres with xylan, xyloglucan and pectin were studied for foaming and structural properties as a new means for food structuring. The dispersions were analysed with rheological measurements, microscopy and optical coherence tomography. A combination of xylan with TEMPO-oxidized nanocellulose produced a mixture with well-dispersed air bubbles, while the addition of pectin improved the elastic modulus, hardness and toughness of the structures. A similar structure was observed with native nanocellulose, but the elastic modulus was not as high. Shear flow caused cellulose nanofibres to form plate-like flocs in the suspension that accumulated near bubble interfaces. This tendency could be affected by adding laccase to the dispersion, but the effect was opposite for native and TEMPO-oxidized nanocellulose. Nanocellulose type also influenced the interactions between nanofibers and other polysaccharides. For example, xyloglucan interacted strongly with TEMPO-oxidized nanocellulose (high storage modulus) but not with native nanocellulose.
Asunto(s)
Pared Celular/química , Celulosa/química , Células Vegetales/química , Polisacáridos/química , Óxidos N-Cíclicos , Glucanos , Nanofibras , Pectinas , XilanosRESUMEN
Structural and textural properties as well as the dietary fibre content of solid cereal foams influence the oral breakdown of structure, bolus formation and digestibility. The aim of this study was to investigate how structural differences of solid cereal foams (puffs vs. flakes) affect in vivo chewing and in vitro starch digestion. Four extruded puffs and flakes were produced from endosperm rye flour by extrusion processing without or with 10% rye bran (RB) addition. Extruded puffs and flakes were masticated by fifteen healthy females and the process was monitored using electromyography. Extruded puffs were more porous than flakes (97% vs 35%). The two products were also significantly different (p<0.05) in their structural and textural properties such as expansion, hardness, density and crispiness. A negative correlation was observed between hardness and crispiness index (p<0.05, r=-0.950) and density and porosity (p<0.05, r=-0.964). Addition of 10% RB had a significant effect on structural, textural and mastication properties both for puffs and flakes. Mastication of puffs required less total work than flakes (204 vs. 456%) and they were degraded to smaller particles than flakes during mastication. Irrespectively of the considerable differences in structure, texture and oral disintegration process, no significant (p<0.05) differences were observed between puffs and flakes (86.4 vs. 85.1) in terms of starch hydrolysis index. RB addition increased the hydrolysis index of puffs and flakes to 89.7 and 94.5, respectively, which was probably attributable to the increased number of particles in the bolus.
Asunto(s)
Fibras de la Dieta/metabolismo , Digestión , Grano Comestible/metabolismo , Endospermo/metabolismo , Manipulación de Alimentos/métodos , Masticación , Secale/metabolismo , Almidón/metabolismo , Adulto , Culinaria , Grano Comestible/química , Endospermo/química , Femenino , Dureza , Humanos , Hidrólisis , Porosidad , Secale/química , Almidón/química , Factores de Tiempo , Adulto JovenRESUMEN
PURPOSE: Underlying mechanisms of the beneficial health effects of low glycemic index starchy foods are not fully elucidated yet. We varied the wheat particle size to obtain fiber-rich breads with a high and low glycemic response and investigated the differences in postprandial glucose kinetics and metabolic response after their consumption. METHODS: Ten healthy male volunteers participated in a randomized, crossover study, consuming 13C-enriched breads with different structures; a control bread (CB) made from wheat flour combined with wheat bran, and a kernel bread (KB) where 85 % of flour was substituted with broken wheat kernels. The structure of the breads was characterized extensively. The use of stable isotopes enabled calculation of glucose kinetics: rate of appearance of exogenous glucose, endogenous glucose production, and glucose clearance rate. Additionally, postprandial plasma concentrations of glucose, insulin, glucagon, incretins, cholecystokinin, and bile acids were analyzed. RESULTS: Despite the attempt to obtain a bread with a low glycemic response by replacing flour by broken kernels, the glycemic response and glucose kinetics were quite similar after consumption of CB and KB. Interestingly, the glucagon-like peptide-1 (GLP-1) response was much lower after KB compared to CB (iAUC, P < 0.005). A clear postprandial increase in plasma conjugated bile acids was observed after both meals. CONCLUSIONS: Substitution of 85 % wheat flour by broken kernels in bread did not result in a difference in glucose response and kinetics, but in a pronounced difference in GLP-1 response. Thus, changing the processing conditions of wheat for baking bread can influence the metabolic response beyond glycemia and may therefore influence health.
Asunto(s)
Glucemia/metabolismo , Pan , Péptido 1 Similar al Glucagón/sangre , Periodo Posprandial , Apetito , Ácidos y Sales Biliares/sangre , Índice de Masa Corporal , Estudios Cruzados , Fibras de la Dieta/administración & dosificación , Harina , Glucagón/sangre , Humanos , Incretinas/sangre , Insulina/sangre , Masculino , Tamaño de la Partícula , Triticum/química , Adulto JovenRESUMEN
The objective was to evaluate the potential of birch xylan as a food hydrocolloid and dietary fibre. High-molecular weight xylan was isolated from birch kraft pulp by alkaline extraction, and enzymatically hydrolysed. Fermentability of xylans was evaluated using an in vitro colon model and performance as a hydrocolloid was studied in low-fat acid milk gels (1.5% and 3% w/w). Texture of the gels and water holding capacity of xylans were compared with inulin, fructooligosaccharide and xylooligosaccharide. Xylans showed slower fermentation rate by faecal microbiota than the references. Xylan-enriched acid milk gels (3% w/w) had improved water holding capacity (over 2-fold) and showed lower spontaneous syneresis, firmness and elasticity when compared to control (no hydrocolloids) or to references. In conclusion, birch xylan improved texture of low-fat acid milk gel applications, and the slow in vitro fermentation rate predicts lower incidence of intestinal discomfort in comparison to the commercial references.
Asunto(s)
Betula/química , Coloides/química , Geles/química , Leche/química , Xilanos/química , Animales , Fibras de la Dieta , Fermentación , Humanos , Hidrólisis , Madera/químicaRESUMEN
Postprandial high glucose and insulin responses after starchy food consumption, associated with an increased risk of developing several metabolic diseases, could possibly be improved by altering food structure. We investigated the influence of a compact food structure; different wheat products with a similar composition were created using different processing conditions. The postprandial glucose kinetics and metabolic response to bread with a compact structure (flat bread, FB) was compared to bread with a porous structure (control bread, CB) in a randomized, crossover study with ten healthy male volunteers. Pasta (PA), with a very compact structure, was used as the control. The rate of appearance of exogenous glucose (RaE), endogenous glucose production, and glucose clearance rate (GCR) was calculated using stable isotopes. Furthermore, postprandial plasma concentrations of glucose, insulin, several intestinal hormones and bile acids were analyzed. The structure of FB was considerably more compact compared to CB, as confirmed by microscopy, XRT analysis (porosity) and density measurements. Consumption of FB resulted in lower peak glucose, insulin and glucose-dependent insulinotropic polypeptide (ns) responses and a slower initial RaE compared to CB. These variables were similar to the PA response, except for RaE which remained slower over a longer period after PA consumption. Interestingly, the GCR after FB was higher than expected based on the insulin response, indicating increased insulin sensitivity or insulin-independent glucose disposal. These results demonstrate that the structure of wheat bread can influence the postprandial metabolic response, with a more compact structure being more beneficial for health. Bread-making technology should be further explored to create healthier products.
Asunto(s)
Glucemia/metabolismo , Pan/análisis , Insulina/sangre , Periodo Posprandial , Triticum , Ácidos y Sales Biliares/sangre , Índice de Masa Corporal , Pruebas Respiratorias , Dióxido de Carbono/análisis , Estudios Cruzados , Polipéptido Inhibidor Gástrico/metabolismo , Glucagón/sangre , Humanos , Incretinas/sangre , Resistencia a la Insulina , Masculino , Tamaño de la Porción , Adulto JovenRESUMEN
The effects of air classification and lactic acid bacteria fermentation on the reduction of anti-nutritional factors (vicine and convicine, trypsin inhibitor activity, condensed tannins and phytic acid) and in vitro protein and starch digestibility of faba bean flour were studied. Free amino acid (FAA) profile analysis was also carried out. Air classification allowed the separation of the flour into protein and starch rich fractions, showing different chemical compositions and microstructures. Lactobacillus plantarum growth and acidification in faba bean flour and its fractions were assessed. The anti-nutritional compounds were separated mostly to the fine protein-rich fraction. Fermentation caused the decrease of vicine and convicine contents by more than 91% and significantly reduced trypsin inhibitor activity and condensed tannins (by more than 40% in the protein-rich fraction). No significant (P>0.05) variation was observed for total phenols and phytic acid content. Fermentation increased the amount of FAA, especially of the essential amino acids and γ-aminobutyric acid, enhanced the in vitro protein digestibility and significantly lowered the hydrolysis index. This work showed that the combination of air classification and fermentation improved nutritional functionality of faba bean flour which could be utilized in various food applications.