The potential of turmeric extract-loaded chitosan microparticles for the treatment of gastrointestinal disorders.

AIM: To develop turmeric extract-loaded chitosan microparticles for treating gastrointestinal disorders. METHODS: The microparticles were prepared using a spray-drying process, optimised the characteristics by biomarker loading, and encapsulation efficiency, and assessed for bioactivities related to gastrointestinal diseases. RESULTS: The optimised microparticles were spherical, with a mean diameter of 2.11 ± 0.34 µm, a SPAN of 4.46 ± 0.68, a zeta potential of +37.6 ± 0.2 mV, loading of 15.7% w/w curcuminoids, 5.4% w/w ar-turmerone, and encapsulation efficiency of 63.26 ± 1.62% w/w curcuminoids and 43.75 ± 1.33% w/w ar-turmerone. Encapsulation of turmeric extract improved release at 6 h by 20 times and mucoadhesion by 3.6 times. The microparticles exhibited high acid-neutralising capacity (1.64 ± 0.34 mEq/g) and inhibited nitric oxide production about twice as effectively as the turmeric extract, while maintaining antioxidant and antibacterial activities. CONCLUSION: Encapsulation of turmeric extract in chitosan microparticles effectively enhanced therapeutic potential for gastrointestinal disorders.

In Vitro Evaluation of Colistin Conjugated with Chitosan-Capped Gold Nanoparticles as a Possible Formulation Applied in a Metered-Dose Inhaler.

Inhaled colistin is used to treat pneumonia and respiratory infections through nebulization or dry powder inhalers. Nevertheless, the development of a metered-dose inhaler (MDI) for colistin, which could enhance patient convenience and treatment efficacy, has not yet been developed. Colistin is known for its ability to induce cellular toxicity. Gold nanoparticles (AuNPs) can potentially mitigate colistin toxicity. Therefore, this study aimed to evaluate the antimicrobial effectiveness of colistin conjugated with chitosan-capped gold nanoparticles (Col-CS-AuNPs) and their potential formulation for use with MDIs to deliver the aerosol directly to the deep lung. Fourier-transform infrared spectroscopy, nuclear magnetic resonance, and elemental analysis were used to characterize the synthesized Col-CS-AuNPs. Drug release profiles fitted with the most suitable release kinetic model were evaluated. An MDI formulation containing 100 µg of colistin per puff was prepared. The aerosol properties used to determine the MDI performance included the fine particle fraction, mass median aerodynamic diameter, and geometric standard deviation, which were evaluated using the Andersen Cascade Impactor. The delivered dose uniformity was also determined. The antimicrobial efficacy of the Col-CS-AuNP formulation in the MDI was assessed. The chitosan-capped gold nanoparticles (CS-AuNPs) and Col-CS-AuNPs had particle sizes of 44.34 ± 1.02 and 174.50 ± 4.46 nm, respectively. CS-AuNPs effectively entrapped 76.4% of colistin. Col-CS-AuNPs exhibited an initial burst release of up to 60% colistin within the first 6 h. The release mechanism was accurately described by the Korsmeyer-Peppas model, with an R2 > 0.95. The aerosol properties of the Col-CS-AuNP formulation in the MDI revealed a high fine particle fraction of 61.08%, mass median aerodynamic diameter of 2.34 µm, and geometric standard deviation of 0.21, with a delivered dose uniformity within 75-125% of the labeled claim. The Col-CS-AuNP MDI formulation completely killed Escherichia coli at 5× and 10× minimum inhibitory concentrations after 6 and 12 h of incubation, respectively. The toxicity of CS-AuNP and Col-CS-AuNP MDI formulations in upper and lower respiratory tract cell lines was lower than that of free colistin. The stability of the Col-CS-AuNP MDI formulation was maintained for at least 3 months. The Col-CS-AuNP MDI formulation effectively eradicated bacteria over a 12-h period, showing promise for advancing lung infection treatments.

Formulation of 1% α-mangostin in orabase gel induces apoptosis in oral squamous cell carcinoma.

BACKGROUND: Plant-derived compounds have chemopreventive properties to be used as alternative medicine. Pericarp of Mangosteen (Garcinia mangostana Linn.), a tropical fruit in Southeast Asia contains a phytochemical α-mangostin (α-MG) that demonstrates potent anticancer effects against various types of cancer. α-MG has been reported to be the most effective agent in human cancer cell lines. The objectives of this study were to develop oral gel formulations containing α-MG and determine their (1) anticancer activity, (2) anti-HPV-16 and antimicrobial activities, (3) nitric oxide (NO) inhibitory activity, and (4) wound healing effect. METHODS: Formulations of oral gel containing α-MG were developed. Anticancer activity on SCC-25 was assessed. Apoptotic induction was determined using flow cytometry technique. Antiviral activity against HPV-16 pseudovirus and antimicrobial activity against S. mutans, P. gingivalis and C. albicans were investigated. NO inhibition was carried out. Fibroblast cell migration was determined by in vitro scratch assay. RESULTS: The formulation of 1% α-MG in orabase gel demonstrated anticancer activity by promoting apoptosis in SCC-25. The induction of apoptotic activity was dose dependent with pronounced effect in late apoptosis. The formulation appeared to reduce cell viability of oral keratinocytes (OKC). At CC50 it showed an inhibition against HPV-16 pseudovirus infection. The formulation had no antimicrobial activity against S. mutans, P. gingivalis and C. albicans. No significant NO inhibitory activity and wound healing effects were found. CONCLUSIONS: 1% α-MG in orabase gel exhibited anticancer activity by inducing apoptosis although low level of cytotoxicity observed in OKC was present. The appropriate carrier for novel nano-particles targeting cancer cells should be further investigated.

Ascorbic acid as serine protease inhibitor in lung cancer cell line and human serum albumin.

Serine proteases (SPs) are distributed among all living cells accounting for almost one-third of all proteases. Dysregulation of SPs during inflammation and/or infection can result in devastating consequences, such as skin and lung inflammation, neuroinflammation, arthritis, as well as metastasis of cancerous cells. Such activities are tightly regulated by various inhibitors known as serine protease inhibitors (SERPIN). The thermodynamic investigations previously revealed that L-ascorbic acid binds to trypsin more firmly than pepsin and the binding force of L-ascorbic acid is driven by hydrogen bonds and van der Waals forces. However, the physiochemical effects of such interaction on trypsin and/or pepsin have not yet been reported. Ascorbic acid, also known as vitamin C, is one of the essential nutrients and most common food supplements, fortificants, and preservatives. The aim of this study was to explore the inhibitory effects of ascorbic acid on serine proteases at various concentrations on the in-vitro digestion and/or hydrolysis of intercellular matrix of cell monolayer and human serum albumin (HSA). The inhibitory effects of ascorbic on trypsin are investigated by qualitative and quantitative analysis using SDS-PAGE imaging and NIH densitometric software. Upon the addition of ascorbic acid in both indicator systems, the detachment and/or dissociation of cell monolayer and the digestion of HSA were inhibited in the presence of EDTA-Trypsin. The inhibitory effect of ascorbic acid on the digestion of intercellular matrix and/or hydrolysis of HSA showed a dose-dependent trend until it reached the maximum extent of inhibition. At an equal concentration (2.5mg/mL) ascorbic acid and EDTA-Trypsin exhibited the most potent inhibitory effect on the in vitro digestion of protein either in the form of intercellular matrix in cell monolayer and/or HSA respectively. Overall, our results based on two indicator systems strongly indicate that ascorbic acid may function as a serine protease inhibitor (SERPIN) beyond other important functions.

Formulation and Antimycotic Evaluation of Colloidal Itraconazole-Loaded Metered Dose Sprays for Treating Superficial Mycoses.

Commercial topical formulations containing itraconazole (poorly water soluble), for mycotic infections, have poor penetration to infection sites beneath the nails and skin thereby necessitating oral administration. To improve penetration, colloidal solutions of itraconazole (G1-G4) containing Poloxamer 188, tween 80, ethanol, and propylene glycol were prepared and incorporated into HFA-134-containing sprays. Formulations were characterized using particle size, drug content, and Fourier-transform infrared spectroscopy (FTIR). In vitro permeation studies were performed using Franz diffusion cells for 8 h. Antimycotic activity on Candida albicans and Trichophyton rubrum was performed using broth micro-dilution and flow cytometry, while cytotoxicity was tested on HaCaT cell lines. Particle size ranged from 39.35-116.80 nm. FTIR and drug content revealed that G1 was the most stable formulation (optimized formulation). In vitro release over 2 h was 45% for G1 and 34% for the cream. There was a twofold increase in skin permeation, fivefold intradermal retention, and a sevenfold increase in nail penetration of G1 over the cream. Minimum fungicidal concentrations (MFC) against C. albicans were 0.156 and 0.313 µg/mL for G1 and cream, respectively. The formulations showed optimum killing kinetics after 48 h. MFC values against T. rubrum were 0.312 and 0.625 µg/mL for the G1 and cream, respectively. Transmission electron microscopy revealed organelle destruction and cell leakage for G1 in both organisms and penetration of keratin layers to destroy T. rubrum. Cytotoxicity evaluation of G1 showed relative safety for skin cells. The G1 formulation showed superior skin permeation, nail penetration, and fungicidal activity compared with the cream formulation.

Inhalable solid lipid nanoparticles of levofloxacin for potential tuberculosis treatment.

Delivering novel antimycobacterial agents through the pulmonary route using nanoparticle-based systems shows promise for treating diseases like tuberculosis. However, creating dry powder inhaler (DPI) with suitable aerodynamic characteristics while preserving nanostructure integrity and maintaining bioactivity until the active ingredient travels deeply into the lungs is a difficult challenge. We developed DPI formulations containing levofloxacin-loaded solid lipid nanoparticles (SLNs) via spray-drying technique with tailored aerosolization characteristics for effective inhalation therapy. A range of biophysical techniques, including transmission electron microscopy, confocal microscopy, and scanning electron microscopy were used to measure the morphologies and sizes of the spray-dried microparticles that explored both the geometric and aerodynamic properties. Spray drying substantially reduced the particle sizes of the SLNs while preserving their nanostructural integrity and enhancing aerosol dispersion with efficient mucus penetration. Despite a slower uptake rate compared to plain SLNs, the polyethylene glycol modified formulations exhibited enhanced cellular uptake in both A549 and NR8383 cell lines. The percent viability of Mycobacterium bovis had dropped to nearly 0 % by day 5 for both types of SLNs. Interestingly, the levofloxacin-loaded SLNs demonstrated a lower minimum bactericidal concentration (0.25 µg/mL) compared with pure levofloxacin (1 µg/mL), which indicated the formulations have potential as effective treatments for tuberculosis.

Dry powder inhaler design and particle technology in enhancing Pulmonary drug deposition: challenges and future strategies.

OBJECTIVES: The efficient delivery of drugs from dry powder inhaler (DPI) formulations is associated with the complex interaction between the device design, drug formulations, and patient's inspiratory forces. Several challenges such as limited emitted dose of drugs from the formulation, low and variable deposition of drugs into the deep lungs, are to be resolved for obtaining the efficiency in drug delivery from DPI formulations. The objective of this study is to review the current challenges of inhaled drug delivery technology and find a way to enhance the efficiency of drug delivery from DPIs. METHODS/EVIDENCE ACQUISITION: Using appropriate keywords and phrases as search terms, evidence was collected from the published articles following SciFinder, Web of Science, PubMed and Google Scholar databases. RESULTS: Successful lung drug delivery from DPIs is very challenging due to the complex anatomy of the lungs and requires an integrated strategy for particle technology, formulation design, device design, and patient inhalation force. New DPIs are still being developed with limited performance and future device design employs computer simulation and engineering technology to overcome the ongoing challenges. Many issues of drug formulation challenges and particle technology are concerning factors associated with drug dispersion from the DPIs into deep lungs. CONCLUSION: This review article addressed the appropriate design of DPI devices and drug formulations aligned with the patient's inhalation maneuver for efficient delivery of drugs from DPI formulations.

Nanolevel of detection of ascorbic acid using horse-radish peroxidase inhibition assay.

Ascorbic acid plays a significant role in regulation of various bodily functions with high concentrations in immune cells and being involved in connective tissue maintenance. Commonly it is detected through various colorimetric methods. In this study, we propose a one-step simple method based on the inhibitory activity of ascorbic acid on horseradish peroxidase and hydrogen peroxide. The detection is observed by colorimetric changes to TMB (3,3',5,5' tetramethylbenzidine). The enzyme inhibition unit was optimized with a high level of linearity (r2 = 0.9999) and the level of detection and level of quantification were found to be 1.35 nM and 4.08 nM, respectively with higher sensitive compared to the HPLC method (11 µM). Both intra and inter-assays showed high correlations at different AA concentrations. (r2 > 0.9999). Similar results were also observed for vitamin C tablets, ascorbate salts, fruits, and market products (r2 = 0.999). There was negligible effect of interference by citric acid, lactic acid, tartaric acids, and glucose with high recoveries (>98%) at 1 mg/mL to 0.0078 mg/mL concentration ranges. The recovery error (RE%) was found to be less than 10%. Our detection method is distinguished by its simplicity, nano-level of detection, reproducibility, and potential application and adaptability as a point-of-use test.

Evaluating the biomolecular interaction between delamanid/formulations and human serum albumin by fluorescence, CD spectroscopy and SPR: Effects on protein conformation, kinetic and thermodynamic parameters.

Delamanid is an anti-tuberculosis drug used for the treatment of drug-resistant tuberculosis. Since delamanid has a high protein bound potential, even patients with low albumin levels should experience high and rapid delamanid clearance. However, the interaction between delamanid and albumin should be better controlled to optimize drug efficacy. This study was designed to evaluate the binding characteristics of delamanid to human serum albumin (HSA) using various methods: fluorescence spectroscopy, circular dichroism (CD), surface plasmon resonance (SPR), and molecular docking simulation. The fluorescence emission band without any shift indicated the interaction was not affected by the polarity of the fluorophore microenvironment. The reduction of fluorescence intensity at 344 nm was proportional to the increment of delamanid concentration as a fluorescence quencher. UV-absorbance measurement at the maximum wavelength (λmax, 280 nm) was evaluated using inner filter effect correction. The HSA conformation change was explained by the intermolecular energy transfer between delamanid and HSA during complex formation. The study, which was conducted at temperatures of 298 K, 303 K, and 310 K, revealed a static quenching mechanism that correlated with a decreased of bimolecular quenching rate constant (kq) and binding constant (Ka) at increased temperatures. The Ka was 1.75-3.16 × 104 M-1 with a specific binding site with stoichiometry 1:1. The negative enthalpy change, negative entropy change, and negative Gibbs free energy change demonstrated an exothermic-spontaneous reaction while van der Waals forces and hydrogen bonds played a vital role in the binding. The molecular displacement approach and molecular docking confirmed that the binding occurred mainly in subdomain IIA, which is a hydrophobic pocket of HSA, with a theoretical binding free energy of -9.33 kcal/mol. SPR exhibited a real time negative sensorgram that resulted from deviation of the reflex angle due to ligand delamanid-HSA complex forming. The binding occurred spontaneously after delamanid was presented to the HSA surface. The SPR mathematical fitting model revealed that the association rate constant (kon) was 2.62 × 108 s-1M-1 and the dissociation rate constant (koff) was 5.65 × 10-3 s-1. The complexes were performed with an association constant (KA) of 4.64 × 1010 M-1 and the dissociation constant (KD) of 2.15 × 10-11 M. The binding constant indicated high binding affinity and high stability of the complex in an equilibrium. Modified CD spectra revealed that conformation of the HSA structure was altered by the presence of delamanid during preparation of the proliposomes that led to the reduction of secondary structure stabilization. This was indicated by the percentage decrease of α-helix. These findings are beneficial to understanding delamanid-HSA binding characteristics as well as the drug administration regimen.

Retraction notice to "Mechanistic insight into the bioactivity of prodigiosin-entrapped lipid nanoparticles against triple-negative breast, lung and colon cancer cell lines" [Heliyon 9 (2023) e16963].

[This retracts the article DOI: 10.1016/j.heliyon.2023.e16963.].

Development of a self-microemulsifying drug delivery system to deliver delamanid via a pressurized metered dose inhaler for treatment of multi-drug resistant pulmonary tuberculosis.

Tuberculosis (TB) is a serious health issue that contributes to millions of deaths throughout the world and increases the threat of serious pulmonary infections in patients with respiratory illness. Delamanid is a novel drug approved in 2014 to deal with multi-drug resistant TB (MDR-TB). Despite its high efficiency in TB treatment, delamanid poses delivery challenges due to poor water solubility leading to inadequate absorption upon oral administration. This study involves the development of novel formulation-based pressurized metered dose inhalers (pMDIs) containing self-microemulsifying mixtures of delamanid for efficient delivery to the lungs. To identify the appropriate self-microemulsifying formulations, ternary diagrams were plotted using different combinations of surfactant to co-surfactant ratios (1:1, 2:1, and 3:1). The combinations used Cremophor RH40, Poly Ethylene Glycol 400 (PEG 400), and peppermint oil, and those that showed the maximum microemulsion region and rapid and stable emulsification were selected for further characterization. The diluted self-microemulsifying mixtures underwent evaluation of dose uniformity, droplet size, zeta potential, and transmission electron microscopy. The selected formulations exhibited uniform delivery of the dose throughout the canister life, along with droplet sizes and zeta potentials that ranged from 24.74 to 88.99 nm and - 19.27 to - 10.00 mV, respectively. The aerosol performance of each self-microemulsifying drug delivery system (SMEDDS)-pMDI was assessed using the Next Generation Impactor, which indicated their capability to deliver the drug to the deeper areas of the lungs. In vitro cytotoxicity testing on A549 and NCI-H358 cells revealed no significant signs of toxicity up to a concentration of 1.56 µg/mL. The antimycobacterial activity of the formulations was evaluated against Mycobacterium bovis using flow cytometry analysis, which showed complete inhibition by day 5 with a minimum bactericidal concentration of 0.313 µg/mL. Moreover, the cellular uptake studies showed efficient delivery of the formulations inside macrophage cells, which indicated the potential for intracellular antimycobacterial activity. These findings demonstrated the potential of the Delamanid-SMEDDS-pMDI for efficient pulmonary delivery of delamanid to improve its effectiveness in the treatment of multi-drug resistant pulmonary TB.

Monitoring the Interaction Between Solid Lipid Nanoparticles and Alveolar Macrophages Via the Label-Free Technique.

Macrophages are employed as targets for delivering genes, drugs, or lipid nanoparticles into tumors or other specific sites. Studying the interaction between solid lipid nanoparticles (SLNs) and macrophages is essential for assessing nanotoxicity and advancing the development of nanomedicines. However, limited data are currently available on the membrane microstructure and biochemical changes that occur when macrophages interact with SLNs. We conducted a label-free morphological and biochemical investigation of NR8383 macrophages using optical diffraction tomography (ODT), which validated the efficiency of the SLNs as a drug delivery system. ODT provided intracellular holotomography to characterize the macrophages and fluorescence imaging to analyze delivery efficiency. ODT analysis revealed the responses of phagocytic macrophages. Additionally, a quantitative analysis of lipid droplets using refractive indices revealed that, compared with incubation with normal cells, incubation with SLNs significantly increased the lipid droplet volume and surface area. The uptake of SLNs into macrophages resulted in increased cell volume, surface area, and concentration, which indicated greater morphological and biochemical variability in the treated cells than in the control cells. The results suggest that ODT imaging is promising for understanding the intracellular distribution of SLNs and useful for validating the efficacy of delivery of SLNs to macrophages.

A novel film spray containing curcumin inhibits SARS-CoV-2 and influenza virus infection and enhances mucosal immunity.

BACKGROUND: Infection by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) and influenza virus is still a major worldwide health concern. Plants are a good source of bioactive compounds to be used as preventive measures for both inhibiting the virus binding and enhancing mucosal innate immunity. Curcumin has been shown to possess antiviral activity and modulate innate immunity. Therefore, the purpose of this study was to develop an oro-nasal film spray containing curcumin and determine its antiviral activity against SARS-CoV-2 and influenza virus infection, as well as its effects on mucosal innate immunity and inflammatory cytokines in vitro. METHODS: The antiviral activity of the film spray against SARS-CoV-2, influenza A/H1N1, A/H3N2, and influenza B was assessed in vitro by plaque reduction assay. Cytotoxicity of the film spray to oral keratinocytes and nasal epithelial cells was assessed by MTT assay, and cytotoxicity to Vero and MDCK cells was assessed by an MTS-based cytotoxicity assay. Oral and nasal innate immune markers in response to the film spray were determined by ELISA and by a commercial Milliplex Map Kit, respectively. RESULTS: Our data show that the film spray containing curcumin can inhibit both SARS-CoV-2 and influenza virus infections while maintaining cell viability. Results obtained among 4 viruses revealed that curcumin film spray demonstrated the highest inhibitory activity against SARS-CoV-2 with the lowest EC50 of 3.15 µg/ml and the highest SI value of 4.62, followed by influenza B (EC50 = 6.32 µg/ml, SI = 2.04), influenza A/H1N1 (EC50 = 7.24 µg/ml, SI = 1.78), and influenza A/H3N2 (EC50 > 12.5 µg/ml, SI < 1.03), respectively. Antimicrobial peptides LL-37 and HD-5, IL-6 and TNF-α produced by oral keratinocytes were significantly induced by the film spray, while hBD2 was significantly reduced. CONCLUSION: Film spray containing curcumin possesses multiple actions against SARS-CoV-2 infection by inhibiting ACE-2 binding in target cells and enhancing mucosal innate immunity. The film spray can also inhibit influenza virus infection. Therefore, the curcumin film spray may be effective in preventing the viral infection of both SARS-CoV-2 and influenza.

Wound healing efficacy of a polymeric spray film solution containing Centella asiatica leaf extract on acute wounds.

OBJECTIVE: To study the clinical efficacy of a polymeric spray film containing Centella asiatica extract to heal acute wounds. METHOD: A polymeric spray film solution for wound healing was formulated using Centella asiatica extract, which contained triterpenes, including asiatic acid, madecassic acid, asiaticoside and madecassoside. The stability and physicochemical properties of the formulation were evaluated, and a multicentre, randomised, controlled trial was conducted to assess its clinical wound-healing efficacy. The Pressure Ulcer Scale for Healing (PUSH Tool) score was used to evaluate wound healing on days 0, 3, 5 and 7. RESULTS: The cohort consisted of 60 volunteers with clean-contaminated wounds (class 1), randomly assigned to the Control (n=30) and Testing (n=30) groups. The spray product contained asiatic acid, madecassic acid, asiaticoside and madecassoside at 0.20±0.02mg/ml, 0.16±0.01mg/ml, 0.32±0.03mg/ml and 0.10±0.00mg/ml, respectively. The pH value was 5.5±0.01, and the viscosity was 33±4cP. The product was stable for six months when stored at 30±2°C and at 40±2°C, in 75±5% relative humidity. The tested product significantly reduced the total PUSH and exudate scores, indicating that the polymeric spray film solution containing Centella asiatica improved wound healing. The average healing recovery times for the Testing and Control groups were 4.6±1.1 days and 4.87±1.0 days, respectively. CONCLUSION: In this study, Centella asiatica extract-containing polymeric spray film solution was beneficial as an acute wound medication, which could shorten healing time with no adverse effects.

α-Mangostin and lawsone methyl ether in tooth gel synergistically increase its antimicrobial and antibiofilm formation effects in vitro.

OBJECTIVES: α-Mangostin (α-MG) and lawsone methyl ether (LME) show antimicrobial and anti-biofilm activities. The objectives of this study were to develop a herbal tooth gel containing α-MG and LME plus fluoride and determine its antimicrobial, anti-biofilm formation, anti-cancer, anti-inflammatory, wound healing, and enamel microhardness effects. METHODS: Antimicrobial assays against Streptococcus mutans, Porphyromonas gingivalis, and Candida albicans were performed. The microbes' ultrastructural morphology was assessed using Transmission Electron Microscopy. The effect on microbial biofilm formation was tested by a broth microdilution. Cell viability was assessed with MTT assay. The anti-inflammatory effect was investigated by measuring inhibition of nitric oxide production. Enamel microhardness was measured via Vickers microhardness testing. The enamel chemical composition was investigated with Fourier Transform Spectrometer. The enamel surface morphology and fluoride content were examined by Scanning Electron Microscopy and Energy Dispersive X-ray Spectroscopy. RESULTS: The results show synergistic effects of α-MG and LME on antimicrobial activity and antibiofilm formation without cytotoxicity at a therapeutic dose. At a higher dose, the tooth gel inhibited proliferation of cancer cell line. Enamel microhardness was increased after brushing with the tooth gel plus fluoride. A large amount of fluoride was detected on the enamel surface. CONCLUSION: The tooth gel containing α-MG and LME synergized its antimicrobial activity and antibiofilm formation and inhibited oral cancer cell proliferation. Incorporating fluoride into the tooth gel increased enamel microhardness. Thus, the herbal tooth gel containing α-MG and LME plus fluoride may be useful for preventing dental caries and promoting oral health.

Assessing the Anti-Aging and Wound Healing Capabilities of Etlingera elatior Inflorescence Extract: A Comparison of Three Inflorescence Color Varieties.

Torch ginger, Etlingera elatior, is a Zingiberaceae plant with various red, pink, and white inflorescence. The wound healing potential and anti-aging effects of freeze-dried torch ginger inflorescence extracts (FTIEs) from three varieties were compared. The red FTIE had the highest content of phenolic, flavonoid, caffeoylquinic acid, and chlorogenic acid, followed by the white and pink FTIE. Consistent with the chemical constituents, the red FTIE demonstrated the greatest capacities for free radical scavenging, anti-tyrosinase, and anti-collagenase activity, followed by the white and pink FTIE. In cell-based studies, FTIEs displayed cytotoxicity to B16F10 melanoma cells, with the red FTIE showing the greatest activity (LC50 of 115.5 µg/mL). In contrast, the pink and the white FTIEs had less cytotoxicity impact. Nonetheless, at 1000 µg/mL, all three FTIE variants were safe on L929 fibroblasts or RAW 264.7 monocyte cells. White FTIE (500 µg/mL) exhibited the highest activity in stimulating collagen production and the greatest impact on cell migration, whereas the pink and red FTIE had a lesser effect. All FTIEs slightly suppressed the pro-inflammatory cytokines produced by lipopolysaccharide-stimulated monocytes, with no significant variation between FTIE variants. In conclusion, all FTIEs revealed promising potential for anti-aging cosmeceuticals and wound care products at specific concentrations.

Insights into the formulation properties, biocompatibility, and permeability of poorly water-soluble methoxyflavones with PEG400 and propylene glycol.

Herein, thermal and non-thermal techniques were used to elucidate the putative physical and chemical interactions between poorly water-soluble Kaempferia methoxyflavones and PEG400/propylene glycol. Additionally, the biocompatibility of methoxyflavone-glycol solutions was evaluated using Caco-2 cells whereas the absorptive transport was investigated by measuring the apparent permeability coefficient (P app) of the methoxyflavones and transepithelial electrical resistance (TEER) of the Caco-2 cell monolayer. Data from differential scanning calorimetry, Fourier-transform infrared (FTIR), and proton nuclear magnetic resonance (1H NMR) spectroscopic analysis revealed physico-chemical compatibility between the three methoxyflavones and PEG400/propylene glycol. Furthermore, PEG400 and propylene glycol solutions of the methoxyflavones were shown to be compatible with Caco-2 cells at pharmacologically effective concentrations. In vitro transport studies across the Caco-2 cell monolayer revealed high P app values of 24.07 × 10-6 to 19.63 × 10-6 cm s-1 for PEG400 solutions of the methoxyflavones. The TEER values of the Caco-2 cell monolayers indicated that the increased drug transport was partly due to increased tight junction openings, but without compromising the epithelial barrier integrity. The good pharmaceutical and biocompatibility profiles, as well as improved transport of the methoxyflavones in PEG400 and propylene glycol solutions, are suggestive of the worthiness of this approach for further consideration pertaining to the development of these drugs into oral liquid dosage forms.

Mechanistic insight into the bioactivity of prodigiosin-entrapped lipid nanoparticles against triple-negative breast, lung and colon cancer cell lines.

This research investigates the potentials of prodigiosin(PG) derived from bacteria and its formulations against triple-negative breast (TNB), lung, and colon cancer cells. The PG was extracted from S. marcescens using continuous batch culture, characterized, and formulated into lyophilized parenteral nanoparticles (PNPs). The formulations were characterized with respect to entrapment efficiency (EE), DSC, FT-IR, TEM, and proton nuclear magnetic resonance (1H NMR) spectroscopy. In vitro drug release was evaluated in phosphate buffer (pH 7.4) while acute toxicity, hematological and histopathological studies were performed on rats. The in vitro cytotoxicity was evaluated against TNB (MCF-7), lung (A-549), and colon (HT-29) cancer cell lines. High EE (92.3 ± 12%) and drug release of up to 89.4% within 8 h were obtained. DSC thermograms of PG and PG-PNPs showed endothermic peaks indicating amorphous nature. The FT-IR spectrum of PG-PNPs revealed remarkable peaks of pure PG, indicating no strong chemical interaction between the drug and excipients. The TEM micrograph of the PG-PNPs showed nano-sized formulations (20-30 nm) whose particles were mostly lamellar and hexagonal structures. The 1H NMR result revealed the chemical structure of PG showing all assigned proton chemical shifts. Toxicity results of the PG and its formulation up to a concentration of 5000 mg/kg showed insignificant vacuolar changes of hepatocytes in the liver, with normal renal medulla and cortex in the kidney. The PG and PG-PNPs inhibited the growth of breast, lung, and colon cell lines. The nano-sized lipid formulation (PG-PNPs) showed potential in PG delivery and cancer treatments.

Interaction studies of cannabidiol with human serum albumin by surface plasmon resonance, spectroscopy, and molecular docking.

The binding interaction of cannabidiol (CBD) and human serum albumin (HSA) under physiological blood pH conditions (pH 7.4) was conducted by surface plasmon resonance (SPR), fluorescence spectroscopy, UV-Visible spectrophotometry, and molecular docking. The responses from SPR measurement increased with the increase in CBD concentration until equilibrium was reached at the equilibrium dissociation constant (KD) of 9.8 × 10-4 M. The results from fluorescence and UV-Visible spectroscopy showed that CBD bound to HSA at one site in a spontaneous manner to form protein-CBD complexes. The quenching process involved both static and dynamic mechanisms while the static mechanism contributed predominantly to the binding between CBD and albumin. The binding constants estimated from the fluorescence studies were from 0.16 × 103 to 8.10 × 103 M-1, which were calculated at different temperature conditions using Stern-Volmer plots. The thermodynamic parameters demonstrated that the binding interaction was a spontaneous reaction as Gibbs free energy had negative values (ΔG = -12.57 to -23.20 kJ.mol-1). Positive ΔH and ΔS values (ΔH = 2.46 × 105 J.mol-1 and ΔS = 869.81 J.mol-1K-1) indicated that the hydrophobic force was the major binding interaction. Finally, confirmation of the type and extent of interaction was provided using UV-spectroscopy and molecular docking studies. The outcomes of this study are expected to serve as a platform to conduct future studies on binding interactions and toxicological research of CBD.Communicated by Ramaswamy H. Sarma.