Accurate measurements of self-diffusion coefficients with benchtop NMR using a QM model-based approach.

The measurement of self-diffusion coefficients using pulsed-field gradient (PFG) nuclear magnetic resonance (NMR) spectroscopy is a well-established method. Recently, benchtop NMR spectrometers with gradient coils have also been used, which greatly simplify these measurements. However, a disadvantage of benchtop NMR spectrometers is the lower resolution of the acquired NMR signals compared to high-field NMR spectrometers, which requires sophisticated analysis methods. In this work, we use a recently developed quantum mechanical (QM) model-based approach for the estimation of self-diffusion coefficients from complex benchtop NMR data. With the knowledge of the species present in the mixture, signatures for each species are created and adjusted to the measured NMR signal. With this model-based approach, the self-diffusion coefficients of all species in the mixtures were estimated with a discrepancy of less than 2 % compared to self-diffusion coefficients estimated from high-field NMR data sets of the same mixtures. These results suggest benchtop NMR is a reliable tool for quantitative analysis of self-diffusion coefficients, even in complex mixtures.

Model-based signal tracking in the quantitative analysis of time series of NMR spectra.

Hard modeling of NMR spectra by Gauss-Lorentz peak models is an effective way for dimensionality reduction. In this manner high-dimensional measured data are reduced to low-dimensional information as peak centers, amplitudes or peak widths. For time series of spectra these parameters can be assumed to be smooth functions in time. We suggest to model these time-dependent parameter functions by cubic spline functions, which makes a stable quantitative analysis of NMR series possible even for crossing, highly overlapping peaks. Applications are presented for the batch distillation of methanol and diethylamine, and the reaction of acetic anhydride with 2-propanol.

A comparison of non-uniform sampling and model-based analysis of NMR spectra for reaction monitoring.

Nuclear magnetic resonance (NMR) spectroscopy is widely used for applications in the field of reaction and process monitoring. When complex reaction mixtures are studied, NMR spectra often suffer from low resolution and overlapping peaks, which places high demands on the method used to acquire or to analyse the NMR spectra. This work presents two NMR methods that help overcome these challenges: 2D non-uniform sampling (NUS) and a recently proposed model-based fitting approach for the analysis of 1D NMR spectra. We use the reaction of glycerol with acetic acid as it produces five reaction products that are all chemically similar and, hence, challenging to distinguish. The reaction was measured on a high-field 400 MHz NMR spectrometer with a 2D NUS-heteronuclear single quantum coherence (HSQC) and a conventional 1D 1 H NMR sequence. We show that comparable results can be obtained using both 2D and 1D methods, if the 2D volume integrals of the 2D NUS-HSQC NMR spectra are calibrated. Further, we monitor the same reaction on a low-field 43 MHz benchtop NMR spectrometer and analyse the acquired 1D 1 H NMR spectra with the model-based approach and with partial least-squares regression (PLS-R), both trained using a single, calibrated data set. Both methods achieve results that are in good quantitative agreement with the high-field data. However, the model-based method was found to be less sensitive to the training data set used than PLS-R and, hence, was more robust when the reaction conditions differed from that of the training data.

Bayesian approach for automated quantitative analysis of benchtop NMR data.

Low-cost, user-friendly benchtop NMR instruments are often touted as a "one-click" solution for data acquisition, however insufficient peak dispersion in their spectra often reduces the accuracy of quantification and requires user expertise with sophisticated processing tools. Our work aims to facilitate the wide acceptance of benchtop NMR instruments as a viable and effective substitute for cryogenic magnets. We propose an algorithmic approach that completely automates the routine analysis of sets of samples with similar compositions - the problem that often underlies many industrial applications concerned with reaction and process monitoring and quality control. Our solution is rooted in the idea of parametric modelling formulated in terms of Bayesian statistics, which effectively incorporates prior knowledge about the studied system (such as concentration-dependent chemical shift changes) that is usually available in industrial applications. Furthermore, the use of quantum mechanical models for chemical species makes our approach invariant to the spectrometer field strength - a necessary prerequisite for the successful analysis of benchtop data. We demonstrate the performance of our method with two representative sets of samples: mixtures of alcohols and acetates, and aqueous mixtures of biologically relevant species. In these examples, our fully automated analysis of benchtop spectra achieves average errors in concentrations of 0.01 mol/mol and 0.02 mol/mol respectively. Our method is competitive with the traditional processing approaches of well resolved high-field data and has the potential to bring the benefits of NMR even to a small chemistry laboratory.

Improving the accuracy of model-based quantitative nuclear magnetic resonance.

Low spectral resolution and extensive peak overlap are the common challenges that preclude quantitative analysis of nuclear magnetic resonance (NMR) data with the established peak integration method. While numerous model-based approaches overcome these obstacles and enable quantification, they intrinsically rely on rigid assumptions about functional forms for peaks, which are often insufficient to account for all unforeseen imperfections in experimental data. Indeed, even in spectra with well-separated peaks whose integration is possible, model-based methods often achieve suboptimal results, which in turn raises the question of their validity for more challenging datasets. We address this problem with a simple model adjustment procedure, which draws its inspiration directly from the peak integration approach that is almost invariant to lineshape deviations. Specifically, we assume that the number of mixture components along with their ideal spectral responses are known; we then aim to recover all useful signals left in the residual after model fitting and use it to adjust the intensity estimates of modelled peaks. We propose an alternative objective function, which we found particularly effective for correcting imperfect phasing of the data - a critical step in the processing pipeline. Application of our method to the analysis of experimental data shows the accuracy improvement of 20 %-40 % compared to the simple least-squares model fitting.

Application of a new method for simultaneous phase and baseline correction of NMR signals (SINC).

Recently, we presented a new approach for simultaneous phase and baseline correction of nuclear magnetic resonance (NMR) signals (SINC) that is based on multiobjective optimization. The algorithm can automatically correct large sets of NMR spectra, which are commonly acquired when reactions and processes are monitored with NMR spectroscopy. The aim of the algorithm is to provide spectra that can be evaluated quantitatively, for example, to calculate the composition of a mixture or the extent of reaction. In this work, the SINC algorithm is tested in three different studies. In an in-house comparison study, spectra of different mixtures were corrected both with the SINC method and manually by different experienced users. The study shows that the results of the different users vary significantly and that their average uncertainty of the composition measurement is larger than the uncertainty obtained when the spectra are corrected with the SINC method. By means of a dilution study, we demonstrate that the SINC method is also applicable for the correction of spectra with low signal-to-noise ratio. Furthermore, a large set of NMR spectra that was acquired to follow a reaction was corrected with the SINC method. Even in this system, where the areas of the peaks and their chemical shifts changed during the course of reaction, the SINC method corrected the spectra robustly. The results show that this method is especially suited to correct large sets of NMR spectra and it is thus an important contribution for the automation of the evaluation of NMR spectra.

Multi-objective optimization for an automated and simultaneous phase and baseline correction of NMR spectral data.

Spectral data preprocessing is an integral and sometimes inevitable part of chemometric analyses. For Nuclear Magnetic Resonance (NMR) spectra a possible first preprocessing step is a phase correction which is applied to the Fourier transformed free induction decay (FID) signal. This preprocessing step can be followed by a separate baseline correction step. Especially if series of high-resolution spectra are considered, then automated and computationally fast preprocessing routines are desirable. A new method is suggested that applies the phase and the baseline corrections simultaneously in an automated form without manual input, which distinguishes this work from other approaches. The underlying multi-objective optimization or Pareto optimization provides improved results compared to consecutively applied correction steps. The optimization process uses an objective function which applies strong penalty constraints and weaker regularization conditions. The new method includes an approach for the detection of zero baseline regions. The baseline correction uses a modified Whittaker smoother. The functionality of the new method is demonstrated for experimental NMR spectra. The results are verified against gravimetric data. The method is compared to alternative preprocessing tools. Additionally, the simultaneous correction method is compared to a consecutive application of the two correction steps.