Achieving multifunctional van der Waals nanoelectronic devices on one structure is essential for the integration of 2D materials; however, it involves complex architectural designs and manufacturing processes. Herein, a facile, fast, and versatile laser direct write micro/nanoprocessing to fabricate diode, NPN (PNP) bipolar junction transistor (BJT) simultaneously based on a pre-fabricated black phosphorus/molybdenum disulfide heterostructure is demonstrated. The PN junctions exhibit good diode rectification behavior. Due to different carrier concentrations of BP and MoS2 , the NPN BJT, with a narrower base width, renders better performance than the PNP BJT. Furthermore, the current gain can be modulated efficiently through laser writing tunable base width WB , which is consistent with the theoretical results. The maximum gain for NPN and PNP is found to be ≈41 (@WB ≈600 nm) and ≈12 (@WB ≈600 nm), respectively. In addition, this laser write processing technique also can be utilized to realize multifunctional WSe2 /MoS2 heterostructure device. The current work demonstrates a novel, cost-effective, and universal method to fabricate multifunctional nanoelectronic devices. The proposed approach exhibits promise for large-scale integrated circuits based on 2D heterostructures.
Two-dimensional (2D) bipolar junction transistors (BJTs) with van der Waals heterostructures play an important role in the development of future nanoelectronics. Herein, a convenient method is introduced for fabricating a symmetric bipolar junction transistor (SBJT), constructed from black phosphorus and MoS2, with femtosecond laser processing. This SBJT exhibits good bidirectional current amplification owing to its symmetric structure. We placed a top gate on one side of the SBJT to change the difference in the major carrier concentration between the emitter and collector in order to further investigate the effects of electrostatic doping on the device performance. The SBJT can also act as a gate-tunable phototransistor with good photodetectivity and photocurrent gain of ß = â¼21. Scanning photocurrent images were used to determine the mechanism governing photocurrent amplification in the phototransistor. These results promote the development of the applications of multifunctional nanoelectronics based on 2D materials.
van der Waals p-n heterostructures based on p-type black phosphorus (BP) integrated with other two-dimensional (2D) layered materials have shown potential applications in electronic and optoelectronic devices, including logic rectifiers and polarization-sensitive photodetectors. However, the engineering of carriers transport anisotropy, which is related to the linear dichroism, have not yet been investigated. Here, we demonstrate a novel van der Waals device of orientation-perpendicular BP homojunction based on the anisotropic band structures between the armchair and zigzag directions. The structure exhibits good gate-tunable diode-like rectification characteristics caused by the barrier between the two perpendicular crystal orientations. Moreover, we demonstrate that the unique mechanisms of the polarization-sensitivity properties of this junction are involved with the linear dichroism and the anisotropic carriers transport engineering. These results were verified by the scanning photocurrent images experiments. This work paves the way for 2D anisotropic layered materials for next-generation electronic and optoelectronic devices.
Phosphorus/chemistry , Anisotropy
Despite many decades of research of diodes, which are fundamental components of electronic and photoelectronic devices with p-n or Schottky junctions using bulk or 2D materials, stereotyped architectures and complex technological processing (doping and multiple material operations) have limited future development. Here, a novel rectification device, an orientation-induced diode, assembled using only few-layered black phosphorus (BP) is investigated. The key to its realization is to utilize the remarkable anisotropy of BP in low dimensions and change the charge-transport conditions abruptly along the different crystal orientations. Rectification ratios of 6.8, 22, and 115 can be achieved in cruciform BP, cross-stacked BP junctions, and BP junctions stacked with vertical orientations, respectively. The underlying physical processes and mechanisms can be explained using "orientation barrier" band theory. The theoretical results are experimentally confirmed using localized scanning photocurrent imaging. These orientation-induced optoelectronic devices open possibilities for 2D anisotropic materials with a new degree of freedom to improve modulation in diodes.
