Preparation of a Nanosheeted Uranyl-Organic Framework for Enhanced Photocatalytic Oxidation of Toluene.

Preparation of ultrathin metal-organic framework (MOF) nanosheets is an effective way to improve the catalytic efficiency of MOF photocatalysts owing to their superiority in reducing the recombination rate of photogenerated electrons and holes and enhancing charge transfer. Herein, a light-sensitive two-dimensional uranyl-organic framework named HNU-68 was synthesized. Due to its interlayer stacking structure, the corresponding ultrathin nanosheets with a thickness of 4.4 nm (HNU-68-N) can be obtained through ultrasonic exfoliation. HNU-68-N exhibited an enhanced ability to selectively oxidize toluene to benzaldehyde, with the value of turnover frequency being approximately three times higher than that of the bulk HNU-68. This enhancement is attributed to the smaller size and interface resistance of the layered HNU-68-N nanosheets, which facilitate more thorough substrate contact and faster charge transfer, leading to an improvement in the photocatalytic efficiency. This work provides a potential candidate for the application of ultrathin uranyl-based nanosheets.

Light-Initiated Imprinted Membrane-Based Biomimetic SERS Sensor toward Selective Detection of Trace MC-LR.

Microcystin-LR (MC-LR) is a severe threat to human and animal health; thus, monitoring it in the environment is essential, especially in water quality protections. Herein, in this work, we synthesize PVDF/CNT/Ag molecular imprinted membranes (PCA-MIMs) via an innovative combination of surface-enhanced Raman spectroscopy (SERS) detection, membrane separation, and molecular-imprinted technique toward the analysis of MC-LR in water. In particular, a light-initiated imprint is employed to protect the chemical structure of the MC-LR molecules. Furthermore, in order to ensure the detection sensitivity, the SERS substrates are combined with the membrane via the assistance of magnetism. The effect of synthesis conditions on the SERS sensitivity was investigated in detail. It is demonstrated from the characteristic results that the PCA-MIMs present high sensitivity to the MC-LR molecules with excellent selectivity against the interfere molecules. Results clearly show that the as-prepared PCA-MIMs hold great potential applications to detect trace MC-LR for the protection of water quality.

Heterometallic MIL-125(Ti-Al) frameworks for electrochemical determination of ascorbic acid, dopamine and uric acid.

The detection of ascorbic acid (AA), dopamine (DA), and uric acid (UA) is not only of great significance in the areas of biomedicine and neurochemistry but also helpful in disease diagnosis and pathology research. Due to their diverse structures, designability, and large specific surface areas, metal-organic frameworks (MOFs) have recently caught considerable attention in the electrochemical field. Herein, a family of heterometallic MOFs with amino modification, MIL-125(Ti-Al)-xNH2 (x = 0%, 25%, 50%, 75%, and 100%), were synthesized and employed as electrochemical sensors for the detection of AA, DA, and UA. Among them, MIL-125(Ti-Al)-75%NH2 exhibited the most promising electrochemical behavior with 40% doping of carbon black in 0.1 M PBS (pH = 7.10), which displayed individual detection performance with wide linear detection ranges (1.0-6.5 mM for AA, 5-100 µM for DA and 5-120 µM for UA) and low limits of detection (0.215 mM for AA, 0.086 µM for DA, and 0.876 µM for UA, S/N = 3). Furthermore, the as-prepared MIL-125(Ti-Al)-75%NH2/GCE provided a promising platform for future application in real sample analysis, owing to its excellent anti-interference performance and good stability.

Tuning optical properties of π-conjugated double nanohoops under external electric field stimuli-responsiveness.

Carbon nanorings have attracted substantial interest from synthetic chemists due to their unique topological structures and distinct physical properties. An intriguing π-conjugated double-nanoring structure, denoted as [8]CPP-[10]cyclacene, was constructed via the integration of [8]cycloparaphenylene ([8]CPP) into [10]cyclacene. Using the external electric field stimuli-responsiveness of [8]CPP-[10]cyclacene, directional charge transfer can be induced, resulting in the emergence of intriguing properties. The effects of the external electric field in three specific directions were explored, vertically in the [8]CPP unit (Fy), vertically in the [10]cyclacene unit (Fz), and horizontally along the double nanorings diameter (Fx). Interestingly, the external electric field vertically to the [10]cyclacene unit significantly enhanced the first hyperpolarizability (ßtot) compared to that vertically to the [8]CPP unit. Notably, [8]CPP-[10]cyclacene under Fx exhibited significantly larger the ßtot values (1.48 × 105 a.u.) than those of vertical Fy and Fz. This work opens up a wide range of nonlinear optics, making it a compelling area to explore in the field of carbon nanomaterials.

Trinuclear Cu-based covalent organic framework: π-conjugated framework regulating electron delocalization to promote photoreduction CO2.

Sunlight-driven CO2 reduction to value-added chemicals is an effective strategy to promote carbon recycling. The exploration of catalysts with efficient charge separation is crucially important for highly efficient CO2 photoreduction. In this work, the preparation of metal-cluster-based covalent organic framework (CuABD) integrated features from both metal organic frameworks (MOFs) and covalent organic frameworks (COFs) through the condensation of diamines and functionalized trinuclear copper clusters demonstrate a thoughtful design strategy. The reported yield of 1.3 mmol g-1 h-1 for formic acid (HCOOH) under simulated solar irradiation is impressive, surpassing the performance of many COF- and MOF-based catalysts previously reported. Compared to its isomorphic metal-free structure (named BDFTD) and bare trinuclear Cu cluster which present extremely poor catalytic activities, CuABD displays remarkably enhanced CO2 reduction activity. Experimental and theoretical investigations reveal that the efficient charge transfer between diamine monomer and cyclic trinuclear copper (I) units, and the electron delocalization of the π-conjugated framework are responsible for the appealing catalytic performance. In summary, the work presents a well-structured and scientifically sound exploration of a metal-cluster-based covalent organic framework for efficient CO2 reduction under sunlight.

Piezofluorochromism in Hierarchical Porous π-stacked Supermolecular Spring Frameworks from Aromatic Chiral Cages.

Piezochromic materials that exhibit pressure-dependent luminescence variations are attracting interest with wide potential applications in mechanical sensors, anticounterfeiting and storage devices. Crystalline porous materials (CPMs) have been widely studied in piezochromism for highly tunable luminescence. Nevertheless, reversible and high-contrast emission response with a wide pressure range is still challenging. Herein, the first example of hierarchical porous cage-based πOF (Cage-πOF-1) with spring structure was synthesized by using aromatic chiral cages as building blocks. Its elastic properties evaluated based on the bulk modulus (9.5 GPa) is softer than most reported CPMs and the collapse point (20.0 GPa) significantly exceeds ever reported CPMs. As smart materials, Cage-πOF-1 displays linear pressure-dependent emission and achieves a high-contrast emission difference up to 154 nm. Pressure-responsive limit is up to 16 GPa, outperforming the CPMs reported so far. Dedicated experiments and density functional theory (DFT) calculations illustrate that π-π interactions-dominated controllable structural shrinkage and porous-spring-structure-mediated elasticity is responsible for the outstanding piezofluorochromism.

Theoretical Study and Design for Thermally Activated Delayed Fluorescence Emitters with Through-Space Charge Transfer from an Acridine Derivative Donor to an O-Bridged Triphenylboron Boroxy Acceptor.

The through-space charge transfer thermally activated delayed fluorescence (TSCT-TADF) properties of a series of molecules were characterized and tested theoretically by density functional theory and time-dependent density functional theory. By analyzing the weak interaction of the molecules at the ground state and calculating the transition contribution ratio of the donor, acceptor, and bridge in the excited state, we verified the through-space charge transfer characteristic of these molecules. We designed new molecules on the basis of the reported molecules (non-TADF molecule 1 and TADF molecule 2) to improve the performance. Smaller singlet-triplet energy gaps and larger spin-orbit coupling were obtained in the designed molecules, which is beneficial to obtain higher intersystem crossing and reverse intersystem crossing rates (kRISC). In addition, we calculated the radiation rate and the singlet-triplet reorganization energy, which is used to characterize the nonradiation rate. The comprehensive evaluation of both radiative and nonradiative processes shows that molecules 4 and 6 have the potential to be highly efficient TSCT-TADF materials.

A novel single-phase color tunable LiYGeO4:Dy3+, Eu3+ phosphor exhibiting warm white light and excellent thermal stability.

LiYGeO4 phosphors doped with Dy3+ and Eu3+ ions were synthesized using the solid phase method, and their color characteristics were adjustable. The bandgap value of LiYGeO4 calculated by diffuse reflection data is very close to the theoretical value of 3.669 eV, indicating that LiYGeO4 is an ideal candidate for doped rare earth activated ions. The analysis of the emission spectra and fluorescence attenuation curves of Dy3+ and Eu3+ co-doped LiYGeO4 phosphors revealed a clear energy transfer process: energy transfer from Dy3+ to Eu3+. Analysis of emission spectra and fluorescence attenuation curves revealed a transfer of energy from Dy3+ to Eu3+. This transfer mechanism is attributed to the dipole-dipole interactions. In addition, by constantly adjusting the doping levels of Dy3+ and Eu3+, a warm white phosphor with a color temperature of 3881 K was obtained. Finally, the emission intensity of the LiYGeO4:0.015Dy3+,0.02Eu3+ phosphor at 423 K was 86%, indicating that the phosphor has excellent thermal stability and 40% internal quantum efficiency, which proves the potential application of the LiYGeO4 phosphor in white light-emitting diodes (w-LEDs).

Garnet Structure-Activated Warm White Light Phosphors Ca3Al2Ge3O12: Dy3+, Eu3+ with Ultrahigh Thermal Stability and Tunable Luminescence.

A series of Ca3Al2Ge3O12: xDy3+, yEu3+ phosphors were successfully prepared by the high-temperature solid-phase method. The phase and morphology of the phosphors were studied by means of Rietveld refinement and scanning electron microscopy. The results show that the phase is pure, and the crystal structure is the Ia3̅d space group. In the Ca3Al2Ge3O12: xDy3+ phosphors, using 380 nm excitation, phosphors showed blue (4F9/2 → 6H15/2) and yellow (4F9/2 → 6H13/2) emission peaks at 481 and 581 nm, respectively. In Ca3Al2Ge3O12: xDy3+, yEu3+ phosphors, the energy transfer was inferred by the spectrum overlap of Dy3+ and Eu3+, and the lifetime attenuation was analyzed from the perspective of dynamics; finally, the band gap structure of the phosphors was analyzed by combining diffuse reflection spectra with the first principle, and the energy transfer mechanism and luminescence mechanism were elaborated by combining theory and practice. The transition from blue white light to red light can be achieved by tuning the range of y in Ca3Al2Ge3O12: 0.015Dy3+, yEu3+. Wherein, when y = 0.07, phosphors, the chromaticity coordinate of warm white CIE is (0.3932, 0.3203), the color temperature is 3093 K, and the warm white light is synthesized. The thermal stability of the synthesized warm white phosphors is 90.1% (423 K), the thermal sensing factors are Samax = 5.51 × 10-4 K-1 (303 K) and Srmax = 0.0359% K-1 (303 K), and the actual quantum efficiency is IQE = 52.48%. These results prove that Ca3Al2Ge3O12: Dy3+, Eu3+ have good application prospects as single-component warm w-LED devices.

Terbium alginate encapsulated CsPbI3@Pb-MOF: a ratiometric fluorescent bead for detection and adsorption of Fe3.

Halide perovskite nanocrystals are innovative luminescent materials for fluorescent probes with high quantum yield and narrow emission bandwidth. However, the limited stability, single-signal response, and separation challenges obstruct their widespread use in water ion detection. Herein, a ratiometric fluorescence sensor based on terbium alginate gel beads (green fluorescent, namely Tb-AG) embedded with powdered CsPbI3@Pb-MOF (red fluorescent) was prepared for fluorescent determination and adsorption of Fe3+. Pb-MOF's protection notably enhances the water stability of CsPbI3, while the energy transfer between CsPbI3@Pb-MOF and Tb3+ elevates the optical performance of CsPbI3@Pb-MOF@Tb-AG. Significantly, Fe3+ markedly suppresses CsPbI3@Pb-MOF red fluorescence at 647 nm, while not noticeably affecting Tb-AG green emission at 528 nm. The sensor exhibited a strong linear response to Fe3+ concentrations ranging from 0 to 90 µM, with a detection limit of 0.44 µM and high selectivity. The CsPbI3@Pb-MOF@Tb-AG-based sensor has been effectively validated through its successful use in detecting Fe3+ in tap and river water samples. Furthermore, CsPbI3@Pb-MOF@Tb-AG demonstrates a notable adsorption capacity of 325.4 mg g-1 Fe3+. Finally, the mechanism of Fe3+ detection and adsorption was determined.

Enhancing dye degradation using a novel cobalt metal-organic framework as a peroxymonosulfate activator.

Among transition metals, cobalt ions exhibit superior catalytic activity in the peroxymonosulfate (PMS) degradation of pollutants. However, practical application is hindered by their high rate of ion leaching and the propensity for particle reunion issues. In this study, a novel cobalt metal-organic framework catalyst, denoted as CUST-565 ([Co3(BTB)2(BIPY)2]·4.5H2O·DMA), was synthesized via a one-step solvothermal method. The obtained crystal was employed as a catalyst to activate PMS for degrading two pollutants, methyl orange (MO) and rhodamine B (RhB), in wastewater. The catalyst demonstrated efficacy in PMS, achieving 97% degradation of MO and 98% degradation of RhB within 30 min at an initial concentration of 20.0 mg L-1. Additionally, various factors affecting dye degradation, including PMS dosage, catalyst dosage, temperature, initial pH, and coexisting anions, were investigated. Radical quenching experiments confirmed the presence of sulfate radicals (SO4˙-), hydroxyl radicals (HO˙), superoxide radicals (O2˙-), and singlet oxygen (1O2) in the system. After four cycles, CUST-565 retained its ability to catalytically degrade approximately 80% of the pollutants. These observed stability and reusability properties, corroborated by a series of characterization analyses before and after use, suggest that CUST-565 exhibits reliable performance. This work contributes to the development of cobalt-PMS catalysts for efficiently degrading dyes in wastewater.

ZIF-derived sulfides with tremella-like core-shell structure for high performance supercapacitors.

Metal-organic frameworks (MOFs) have emerged as promising active electrode materials in supercapacitors for its controllable porous structure and excellent physio-chemical properties. However, the poor conductivities keep it from achieving its full capacitance potential, which greatly limits its practical application. Here, a facile pathway is reported to fabricate the GO/Ni2ZnS4@NiCo2S4 composite with large specific surface area and favorable electrical conductivity. Thanks to the novel tremella-like core-shell structure and high-efficient synergistic effects among multi-components, the designed GO/Ni2ZnS4@NiCo2S4 electrode shows a high specific capacitance of 2284 F/g at 1 A/g. Furthermore, the asymmetric supercapacitor fabricated by coupling GO/Ni2ZnS4@NiCo2S4 positive electrode with biological carbon negative electrode achieves a remarkable energy density of 120 Wh kg-1 at a power density of 750 W kg-1.

Tunable covalent benzo-heterocyclic rings constructed using two-dimensional conjugated polymers for visible-light-driven water splitting.

Developing highly efficient, stable, and cost-effective two-dimensional (2D) conjugated polymers (CPs) for overall water splitting (OWS) is critical for producing clean and renewable hydrogen energy, yet it remains a great challenge. Here, we designed eight 2D CPs through the topological assembly of diacetylene and benzene-derived molecular linkers that can offer active sites for hydrogen and oxygen evolution reactions, and explored their structural, electronic, optical, and photocatalytic OWS properties by performing first-principles computations. It is shown that incorporating benzo-heterocyclic rings into CPs can significantly modulate the electronic structures of CPs and broaden the spectral absorption, suitable for visible-light-driven OWS. Remarkably, through a range of screening criteria, including stability, electronic band structures, band edge alignments, and photocatalytic activity, we found that CP-4 based on diacetylene and benzotrifuran can spontaneously trigger the OWS in a neutral environment under its own light-induced bias, eliminating the need for sacrificial agents or cocatalysts. Specifically, the HER active site is primarily located at diacetylene moieties, while the OER active site is mainly concentrated on the benzo-heterocyclic rings. Moreover, the ideal STH efficiency for OWS on CP-4 was estimated to be 13.87%, highlighting its potential as a prospective photocatalyst for large-scale industrial OWS. Our findings open a door to the rational design of novel polymer photocatalysts for OWS.

Co-based MOF heterogeneous catalyst for the efficient degradation of organic dye via peroxymonosulfate activation.

In this study, a new cobalt-based metal-organic framework (JLNU-500), [Co2(OH)(PBA)(AIP)]·3DMA·0.75H2O (4-(pyridin-4-yl) benzoic acid (HPBA), 5-aminoisophthalic acid (H2AIP) and N,N-dimethylacetamide (DMA)), was fabricated using a solvothermal method. JLNU-500 has 3D network architecture with 1D nanopore channels. The prepared JLNU-500 can activate peroxymonosulfate (PMS) for Rhodamine B (RhB) dye decolorization. Interestingly, catalyst JLNU-500 exhibited high efficiency for PMS activation, and nearly 100% (above 99.8%) removal of RhB with a high concentration (50.0 mg L-1, 100 mL) was achieved within 6 min. The reaction rate constant of the JLNU-500/PMS system was 1.02 min-1 calculated based on the pseudo-first-order kinetics, which is higher than that of the other reported catalysts. Furthermore, the factors, which could influence PMS activation were also investigated, such as PMS dosage, catalyst dosage, pollutant RhB concentration, reaction temperature and solution pH. More importantly, the radical trapping experiments ferreted out that sulfate (SO4˙-) and hydroxyl (˙OH) radicals were the dominating oxidants in the removal of RhB. Moreover, the possible degradation mechanism was elucidated. This study provides new prospects for fabricating new MOFs that can potentially be employed for high-efficiency catalytic oxidation as heterogeneous catalysts.

Selective Encapsulation and Chiral Induction of C60 and C70 Fullerenes by Axially Chiral Porous Aromatic Cages.

Chiral induction has been an important topic in chemistry, not only for its relevance in understanding the mysterious phenomenon of spontaneous symmetry breaking in nature but also due to its critical implications in medicine and the chiral industry. The induced chirality of fullerenes by host-guest interactions has been rarely reported, mainly attributed to their chiral resistance from high symmetry and challenges in their accessibility. Herein, we report two new pairs of chiral porous aromatic cages (PAC), R-PAC-2, S-PAC-2 (with Br substituents) and R-PAC-3, S-PAC-3 (with CH3 substituents) enantiomers. PAC-2, rather than PAC-3, achieves fullerene encapsulation and selective binding of C70 over C60 in fullerene carbon soot. More significantly, the occurrence of chiral induction between R-PAC-2, S-PAC-2 and fullerenes is confirmed by single-crystal X-ray diffraction and the intense CD signal within the absorption region of fullerenes. DFT calculations reveal the contribution of electrostatic effects originating from face-to-face arene-fullerene interactions dominate C70 selectivity and elucidate the substituent effect on fullerene encapsulation. The disturbance from the differential interactions between fullerene and surrounding chiral cages on the intrinsic highly symmetric electronic structure of fullerene could be the primary reason accounting for the induced chirality of fullerene.

A Theoretical Study on the Underlying Factors of the Difference in Performance of Organic Solar Cells Based on ITIC and Its Isomers.

Recently, non-fullerene-based organic solar cells (OSCs) have made great breakthroughs, and small structural differences can have dramatic impacts on the power conversion efficiency (PCE). We take ITIC and its isomers as examples to study their effects on the performance of OSCs. ITIC and NFBDT only differed in the side chain position, and they were used as models with the same donor molecule, PBDB-T, to investigate the main reasons for the difference in their performance in terms of theoretical methods. In this work, a detailed comparative analysis of the electronic structure, absorption spectra, open circuit voltage and interfacial parameters of the ITIC and NFBDT systems was performed mainly by combining the density functional theory/time-dependent density functional theory and molecular dynamics simulations. The results showed that the lowest excited state of the ITIC molecule possessed a larger ∆q and more hybrid FE/CT states, and PBDB-T/ITIC had more charge separation paths as well as a larger kCS and smaller kCR. The reason for the performance difference between PBDB-T/ITIC and PBDB-T/NFBDT was elucidated, suggesting that ITIC is a superior acceptor based on a slight modulation of the side chain and providing a guiding direction for the design of superior-performing small molecule acceptor materials.

Efficient Proton Conductor Based on Bismuth Oxide Clusters and Polyoxometalates.

Developing new solid-state electrolyte materials for improving the proton conductivity remains an important challenge. Herein, a novel two-dimensional layered solid-state proton conductor Bi2O2-SiW12 nanocomposite, based on silicotungstic acid (H4SiW12O40) and Bi(NO3)3·5H2O, was synthesized and characterized. The composite consists of a layered cation framework [Bi2O2]2+ and interlayer-embedded counteranionic [SiW12O40]4-, which forms continuous hydrogen bond (O-H···O) networks through the interaction of adjacent oxygen atoms on the surface of the [Bi2O2]2+ and oxygen atoms of the H4SiW12O40. Facile proton transfer along these pathways endows the Bi2O2-SiW12 (30:1) nanocomposite with an excellent proton conductivity of 3.61 mS cm-1 at 90 °C and 95% relative humidity, indicating that the nanocomposite has good prospects as a highly efficient proton conductor.

A single transition metal atom anchored on Nb2C as an electrocatalyst for the nitrogen reduction reaction.

Nitrogen (N2) reduction to produce ammonia (NH3) under milder conditions is attractive as NH3 has been widely used in various fields. The electrocatalytic nitrogen reduction reaction (NRR) is considered to be a more moderate and green method for ammonia synthesis. Herein, using density functional theory (DFT) computations, we investigated the potential application of single-atom catalysts (SACs) toward the NRR, in which transition metal (TM, TM = Ti, V, Mn, Fe, Co, Y, Zr, Mo) atoms are supported on Nb2C (TM-Nb2C). Through our screening, Fe-Nb2C is highlighted from 8 candidate systems as the superior SAC for the NRR with a low limiting potential of -0.47 V. Meanwhile, a volcano plot between UL (NRR) and the ICOHP values of the N-H bond in *NH2 is established to determine the optimal ICOHP values that can be used as a simple descriptor of the NRR performance of Fe-Nb2C.

Construction of Zr-Metal-Organic Frameworks-Based Composite Materials toward Anhydrous Proton Conduction and Photocatalytic CO2 Reduction.

Metal-organic frameworks constructed from Zr usually possess excellent chemical and physical stability. Therefore, they have become attractive platforms in various fields. In this work, two families of hybrid materials based on ZrSQU have been designed and synthesized, named Im@ZrSQU and Cu@ZrSQU, respectively. Im@ZrSQU was prepared through the impregnation method and employed for proton conduction. Im@ZrSQU exhibited terrific proton conduction performance in an anhydrous environment, with the highest proton conduction value of 3.6 × 10-2 S cm-1 at 110 °C. In addition, Cu@ZrSQU was synthesized via the photoinduction method for the photoreduction of CO2, which successfully promoted the conversion of CO2 into CO and achieved the CO generation rate of up to 12.4 µmol g-1 h-1. The photocatalytic performance of Cu@ZrSQU is derived from the synergistic effect of Cu NPs and ZrSQU. Based on an in-depth study and discussion toward ZrSQU, we provide a versatile platform with applications in the field of proton conduction and photocatalysis, which will guide researchers in their further studies.

Electron delocalization of robust high-nuclear bismuth-oxo clusters for promoted CO2 electroreduction.

The integration of high activity, selectivity and stability in one electrocatalyst is highly desirable for electrochemical CO2 reduction (ECR), yet it is still a knotty issue. The unique electronic properties of high-nuclear clusters may bring about extraordinary catalytic performance; however, construction of a high-nuclear structure for ECR remains a challenging task. In this work, a family of calix[8]arene-protected bismuth-oxo clusters (BiOCs), including Bi4 (BiOC-1/2), Bi8Al (BiOC-3), Bi20 (BiOC-4), Bi24 (BiOC-5) and Bi40Mo2 (BiOC-6), were prepared and used as robust and efficient ECR catalysts. The Bi40Mo2 cluster in BiOC-6 is the largest metal-oxo cluster encapsulated by calix[8]arenes. As an electrocatalyst, BiOC-5 exhibited outstanding electrochemical stability and 97% Faraday efficiency for formate production at a low potential of -0.95 V vs. RHE, together with a high turnover frequency of up to 405.7 h-1. Theoretical calculations reveal that large-scale electron delocalization of BiOCs is achieved, which promotes structural stability and effectively decreases the energy barrier of rate-determining *OCHO generation. This work provides a new perspective for the design of stable high-nuclear clusters for efficient electrocatalytic CO2 conversion.