RESUMEN
An electrochemical sensor based on porous aromatic cages was reported, which can achieve chiral sensing of DOPA enantiomers. The prepared sensor can achieve a recognition efficiency of up to 2.6 for DOPA enantiomers. The enhanced recognition efficiency could be attributed to the cooperation of intermolecular interactions, and the efficient charge transfer process.
RESUMEN
Sunlight-driven CO2 reduction to value-added chemicals is an effective strategy to promote carbon recycling. The exploration of catalysts with efficient charge separation is crucially important for highly efficient CO2 photoreduction. In this work, the preparation of metal-cluster-based covalent organic framework (CuABD) integrated features from both metal organic frameworks (MOFs) and covalent organic frameworks (COFs) through the condensation of diamines and functionalized trinuclear copper clusters demonstrate a thoughtful design strategy. The reported yield of 1.3 mmol g-1 h-1 for formic acid (HCOOH) under simulated solar irradiation is impressive, surpassing the performance of many COF- and MOF-based catalysts previously reported. Compared to its isomorphic metal-free structure (named BDFTD) and bare trinuclear Cu cluster which present extremely poor catalytic activities, CuABD displays remarkably enhanced CO2 reduction activity. Experimental and theoretical investigations reveal that the efficient charge transfer between diamine monomer and cyclic trinuclear copper (I) units, and the electron delocalization of the π-conjugated framework are responsible for the appealing catalytic performance. In summary, the work presents a well-structured and scientifically sound exploration of a metal-cluster-based covalent organic framework for efficient CO2 reduction under sunlight.
RESUMEN
Piezochromic materials that exhibit pressure-dependent luminescence variations are attracting interest with wide potential applications in mechanical sensors, anticounterfeiting and storage devices. Crystalline porous materials (CPMs) have been widely studied in piezochromism for highly tunable luminescence. Nevertheless, reversible and high-contrast emission response with a wide pressure range is still challenging. Herein, the first example of hierarchical porous cage-based πOF (Cage-πOF-1) with spring structure was synthesized by using aromatic chiral cages as building blocks. Its elastic properties evaluated based on the bulk modulus (9.5â GPa) is softer than most reported CPMs and the collapse point (20.0â GPa) significantly exceeds ever reported CPMs. As smart materials, Cage-πOF-1 displays linear pressure-dependent emission and achieves a high-contrast emission difference up to 154â nm. Pressure-responsive limit is up to 16â GPa, outperforming the CPMs reported so far. Dedicated experiments and density functional theory (DFT) calculations illustrate that π-π interactions-dominated controllable structural shrinkage and porous-spring-structure-mediated elasticity is responsible for the outstanding piezofluorochromism.
RESUMEN
Halide perovskite nanocrystals are innovative luminescent materials for fluorescent probes with high quantum yield and narrow emission bandwidth. However, the limited stability, single-signal response, and separation challenges obstruct their widespread use in water ion detection. Herein, a ratiometric fluorescence sensor based on terbium alginate gel beads (green fluorescent, namely Tb-AG) embedded with powdered CsPbI3@Pb-MOF (red fluorescent) was prepared for fluorescent determination and adsorption of Fe3+. Pb-MOF's protection notably enhances the water stability of CsPbI3, while the energy transfer between CsPbI3@Pb-MOF and Tb3+ elevates the optical performance of CsPbI3@Pb-MOF@Tb-AG. Significantly, Fe3+ markedly suppresses CsPbI3@Pb-MOF red fluorescence at 647 nm, while not noticeably affecting Tb-AG green emission at 528 nm. The sensor exhibited a strong linear response to Fe3+ concentrations ranging from 0 to 90 µM, with a detection limit of 0.44 µM and high selectivity. The CsPbI3@Pb-MOF@Tb-AG-based sensor has been effectively validated through its successful use in detecting Fe3+ in tap and river water samples. Furthermore, CsPbI3@Pb-MOF@Tb-AG demonstrates a notable adsorption capacity of 325.4 mg g-1 Fe3+. Finally, the mechanism of Fe3+ detection and adsorption was determined.
RESUMEN
BACKGROUND: Angiogenesis and metastasis contributes substantially to the poor outcome of patients with ovarian cancer. We aimed to explore the role and mechanisms of the long non-coding RNA NEAT1 (nuclear enriched abundant transcript 1) in regulating angiogenesis and metastasis of human ovarian cancer. NEAT1 expression in human ovarian cancer tissues and cell lines including SKOV-3 and A2780 was investigated through in situ hybridization. Gene knockdown and overexpressing were achieved through lentivirus infection, transfection of plasmids or microRNA mimics. Cell viability was measured with the cell counting kit-8 assay, while apoptosis was determined by flow cytometry. Cell migration and invasion were evaluated by transwell experiments, and protein expression was determined by western blot assays or immunohistochemistry. Duo-luciferase reporter assay was employed to confirm the interaction between NEAT1 and target microRNA. In vivo tumor growth was evaluated in nude mice with xenografted SKOV-3/A2780 cells, and blood vessel formation in tumor was examined by histological staining. RESULTS: NEAT1 was highly expressed in ovarian cancer tissues of patients and cell lines. MiR-214-3p was identified as a sponging target of NEAT1, and they antagonizedeach other in a reciprocal manner. NEAT1-overexpressing SKOV-3 and A2780 cells had significantly increased proliferation, reduced apoptosis, and augmented abilities of migration and invasion, while cells with NEAT1-knockdown displayed markedly attenuated traits of malignancies. Additionally, the levels of NEAT1 appeared to be positively correlated with the expression levels of angiogenesis-related molecules, including Semaphorin 4D (Sema4D), Sema4D receptor Plexin B1, T-lymphoma invasion and metastasis-inducing protein-1 (Tiam1), and Rho-like GTPases Rac1/2/3. In the xenograft mouse model, more NEAT1 expression resulted in faster in vivo tumor growth, more blood vessel formation in tumor tissues, as well as higher expression levels of angiogenesis-related molecules and CD31. CONCLUSIONS: NEAT1 promotes angiogenesis and metastasis in human ovarian cancer. NEAT1 and miR-214-3p are promising targets for developing therapeutics to treat human ovarian cancer.
Asunto(s)
MicroARNs , Neoplasias Ováricas , ARN Largo no Codificante , Humanos , Femenino , Animales , Ratones , ARN Largo no Codificante/genética , ARN Largo no Codificante/metabolismo , Línea Celular Tumoral , Ratones Desnudos , Neoplasias Ováricas/genética , MicroARNs/genética , MicroARNs/metabolismo , Proliferación Celular/genéticaRESUMEN
Chiral induction has been an important topic in chemistry, not only for its relevance in understanding the mysterious phenomenon of spontaneous symmetry breaking in nature but also due to its critical implications in medicine and the chiral industry. The induced chirality of fullerenes by host-guest interactions has been rarely reported, mainly attributed to their chiral resistance from high symmetry and challenges in their accessibility. Herein, we report two new pairs of chiral porous aromatic cages (PAC), R-PAC-2, S-PAC-2 (with Br substituents) and R-PAC-3, S-PAC-3 (with CH3 substituents) enantiomers. PAC-2, rather than PAC-3, achieves fullerene encapsulation and selective binding of C70 over C60 in fullerene carbon soot. More significantly, the occurrence of chiral induction between R-PAC-2, S-PAC-2 and fullerenes is confirmed by single-crystal X-ray diffraction and the intense CD signal within the absorption region of fullerenes. DFT calculations reveal the contribution of electrostatic effects originating from face-to-face arene-fullerene interactions dominate C70 selectivity and elucidate the substituent effect on fullerene encapsulation. The disturbance from the differential interactions between fullerene and surrounding chiral cages on the intrinsic highly symmetric electronic structure of fullerene could be the primary reason accounting for the induced chirality of fullerene.
RESUMEN
The integration of high activity, selectivity and stability in one electrocatalyst is highly desirable for electrochemical CO2 reduction (ECR), yet it is still a knotty issue. The unique electronic properties of high-nuclear clusters may bring about extraordinary catalytic performance; however, construction of a high-nuclear structure for ECR remains a challenging task. In this work, a family of calix[8]arene-protected bismuth-oxo clusters (BiOCs), including Bi4 (BiOC-1/2), Bi8Al (BiOC-3), Bi20 (BiOC-4), Bi24 (BiOC-5) and Bi40Mo2 (BiOC-6), were prepared and used as robust and efficient ECR catalysts. The Bi40Mo2 cluster in BiOC-6 is the largest metal-oxo cluster encapsulated by calix[8]arenes. As an electrocatalyst, BiOC-5 exhibited outstanding electrochemical stability and 97% Faraday efficiency for formate production at a low potential of -0.95 V vs. RHE, together with a high turnover frequency of up to 405.7 h-1. Theoretical calculations reveal that large-scale electron delocalization of BiOCs is achieved, which promotes structural stability and effectively decreases the energy barrier of rate-determining *OCHO generation. This work provides a new perspective for the design of stable high-nuclear clusters for efficient electrocatalytic CO2 conversion.
RESUMEN
Precise synthesis of polyoxometalates (POMs) is important for the fundamental understanding of the relationship between the structure and function of each building motif. However, it is a great challenge to realize the atomic-level tailoring of specific sites in POMs without altering the major framework. Herein, we report the case of Ce-mediated molecular tailoring on gigantic {Mo132}, which has a closed structural motif involving a never seen {Mo110} decamer. Such capped wheel {Mo132} undergoes a quasi-isomerism with known {Mo132} ball displaying different optical behaviors. Experiencing an 'Inner-On-Outer' binding process with the substituent of {Mo2} reactive sites in {Mo132}, the site-specific Ce ions drive the dissociation of {Mo2*} clipping sites and finally give rise to a predictable half-closed product {Ce11Mo96}. By virtue of the tailor-made open cavity, the {Ce11Mo96} achieves high proton conduction, nearly two orders of magnitude than that of {Mo132}. This work offers a significant step toward the controllable assembly of POM clusters through a Ce-mediated molecular tailoring process for desirable properties.
RESUMEN
Membrane fouling and scaling are two challenges for efficient treatment of hypersaline wastewater, greatly hindering separation performance and operation stability of desalination membranes. In this work, we report a smooth ceramic-based graphene desalination membrane, exhibiting enhanced anti-fouling and anti-scaling ability and operational performance for efficient treatment of both synthetic and real industrial wastewaters, outperforming polypropylene (PP) membrane. For treatment of hypersaline waters containing organic or inorganic substance, we demonstrate that the graphene membrane exhibits more stable water flux and almost complete salt rejection (>99.9%) during constant operation. Enhanced anti-fouling and desalination performance of graphene membrane could be attributed to the lower attractive interaction force with foulant (-4.65 mJ m-2), lower surface roughness (Ra = 2.2 ± 0.1 nm) and higher affinity with water than PP membrane. Furthermore, an anti-scaling mechanism enabled by graphene membrane is evidenced, with a highlight on the roles of smooth graphene surface with lower roughness, less nucleation sites and lower binding force with scaling crystals. Importantly, even for industrial petrochemical wastewater, such a graphene membrane also exhibits relatively more stable water flux and promising oil and ions rejection during long-term operation, outperforming PP membrane. This study further confirms a promising practical application potential of robust ceramic-based graphene membrane for efficient treatment of more challenging hypersaline wastewater with complicated compositions, which is not feasible by conventional desalination membranes.
Asunto(s)
Grafito , Purificación del Agua , Aguas Residuales , Membranas Artificiales , CerámicaRESUMEN
Mixtures of silica nanoparticles (SiO2 NPs) and natural organic matter (NOM) are ubiquitous in natural aquatic environments and pose risks to organisms. Ultrafiltration (UF) membranes can effectively remove SiO2 NP-NOM mixtures. However, the corresponding membrane fouling mechanisms, particularly under different solution conditions, have not yet been studied. In this work, the effect of solution chemistry on polyethersulfone (PES) UF membrane fouling caused by a SiO2 NP-NOM mixture was investigated at different pH levels, ionic strengths, and calcium concentrations. The corresponding membrane fouling mechanisms, i.e., Lifshitz-van der Waals (LW), electrostatic (EL), and acid-base (AB) interactions, were quantitatively evaluated using the extended Derjaguin-Landau-Verwey-Overbeek (xDLVO) theory. It was found that the extent of membrane fouling increased with decreasing pH, increasing ionic strength, and increasing calcium concentration. The attractive AB interaction between the clean/fouled membrane and foulant was the major fouling mechanism in both the initial adhesion and later cohesion stages, while the attractive LW and repulsive EL interactions were less important. The change of fouling potential with solution chemistry was negatively correlated with the calculated interaction energy, indicating that the UF membrane fouling behavior under different solution conditions can be effectively explained and predicted using the xDLVO theory.
RESUMEN
Rational design of high-performance bifunctional electrocatalysts to accelerate the sluggish oxygen reduction reactions (ORR) and oxygen evolution reactions (OER) in rechargeable Zn-air batteries remain an enduring challenge. The construction of multicomponent catalysts is a promising solution to achieve this goal. Herein, B and N co-doped interconnecting graphite carbon and carbon nanotube with the decoration of Co and vanadium nitride (VN) nanoparticles (Co/BN-CNT/VN) are synthesized using Co-modified polyoxovanadoborates as precursors. The optimized composite achieves superior bifunctional oxygen electrocatalytic activity and stability, which is comparable to noble metal catalysts and reported bifunctional electrocatalysts. Specifically, the half-potential of ORR reaches 0.85 V, and the overpotential of OER is low to 296 mV at a current density of 10 mA cm-2. Strikingly, zinc-air batteries assembled based on Co/BN-CNT/VN demonstrate a small charge-discharge voltage gap of 0.873 V, a remarkable peak-power density of 156.3 mW cm-2, and outstanding cycling durability (â¼1000 cycles at 10 mA cm-2). This work affords a new alternative strategy to create cost-effective and high-potency bifunctional oxygen electrocatalysts for advanced air batteries.
RESUMEN
Direct conversion of diluted CO2 to value-added chemical stocks and fuels with solar energy is an energy-saving approach to relieve global warming and realize a carbon-neutral cycle. The exploration of catalysts with both efficient CO2 adsorption and reduction ability is significant to achieving this goal. Metal-organic frameworks (MOFs) are emerging in the field of low-concentration CO2 reduction due to their highly tunable structure, high porosity, abundant active sites and excellent CO2 adsorption capacity. This highlight outlines the advantages of MOFs for low-pressure CO2 adsorption and the strategies to improve the photocatalytic performance of MOF materials at low CO2 concentrations, including the functionalization of organic ligands, regulation of metal nodes and preparation of MOF composites or derivatives. This paper aims to provide possible avenues for the rational design and development of catalysts with the ability to reduce low-concentration CO2 efficiently for practical applications.
RESUMEN
The synthesis of ultra-stable chiral porous organic cages (POCs) and their controllable chiral self-sorting at the molecular and supramolecular level remains challening. Herein, we report the design and synthesis of a serial of axially chiral porous aromatic cages (PAC 1-S and 1-R) with high chemical stability. The theoretical and experimental studies on the chiral self-sorting reveal that the exclusive self-recognition on cage formation is an enthalpy-driven process while the chiral narcissistic and self-sorting on supramolecular assembly of racemic cages can be precisely regulated by π-π and C-H π interactions from different solvents. Regarding the chemical stability, the crystallinity of PAC 1 is maintained in aqueous solvents, such as boiling water, high-concentrated acid and alkali; mixtures of solvents, such as 1 M H2SO4/MeOH/H2O solution, are also tolerated. Investigations on the chiral sensing performance show that PAC 1 enables enantioselective recognition of axially chiral biaryl molecules.
RESUMEN
Despite increasing sustainable water purification, current desalination membranes still suffer from insufficient permeability and treatment efficiency, greatly hindering extensive practical applications. In this work, we provide a new membrane design protocol and molecule-level mechanistic understanding of vapor transport for the treatment of hypersaline waters via a membrane distillation process by rationally fabricating more robust metal-based carbon nanotube (CNT) network membranes, featuring a superhydrophobic superporous surface (80.0 ± 2.3% surface porosity). With highly permeable ductile metal hollow fibers as substrates, the construction of a superhydrophobic (water contact angle â¼170°) CNT network layer endows the membranes with not only almost perfect salt rejection (over 99.9%) but a promising water flux (43.6 L·m-2·h-1), which outperforms most existing inorganic distillation membranes. Both experimental and molecular dynamics simulation results indicate that such an enhanced water flux can be ascribed to an ultra-low liquid-solid contact interface (â¼3.23%), allowing water vapor to rapidly transport across the membrane structure via a combined mechanism of Knudsen diffusion (more dominant) and viscous flow while efficiently repelling high-salinity feed via forming a Cassie-Baxter state. A more hydrophobic surface is more in favor of not only water desorption from the CNT outer surface but superfast and frictionless water vapor transport. By constructing a new superhydrophobic triple-phase interface, the conceptional design strategy proposed in this work can be expected to be extended to other membrane material systems as well as more water treatment applications.
Asunto(s)
Nanotubos de Carbono , Purificación del Agua , Destilación , Gases , Membranas , VaporRESUMEN
PURPOSE: High-risk human papillomavirus (HR-HPV)-positive but cytology-negative cervical cancer screening results are not uncommon. This study aimed to investigate colposcopy's accuracy and diagnostic value in patients with cytology-negative HR-HPV-positive screening results. METHODS: This retrospective study included patients with HR-HPV-positive cytology-negative screening results who underwent electronic colposcopy with acetic acid and multi-point cervical biopsy, HPV typing (24 HPV subtypes), and quantitative HPV detection. RESULTS: Among 229 patients, 130 had chronic cervicitis, and 99 had cervical lesions (CIN1, n = 37; CIN2/3, n = 55; invasive carcinoma, n = 7). Using colposcopy as a reference, the cervical cytology false-negative rate was 43.2% (99/229). Colposcopy was more accurate in patients with HR-HPV16/18 or high viral loads. Multivariable analyses showed HPV viral load and childbearing history were the independent factors affecting the accuracy of colposcopy (P < 0.05). CONCLUSION: Colposcopy in HR-HPV-positive cytology-negative patients has a moderate diagnostic accuracy. The type of cervical transformation zone and HPV viral load are independent factors affecting the accuracy of colposcopy-based diagnosis.
Asunto(s)
Infecciones por Papillomavirus , Neoplasias del Cuello Uterino , Colposcopía , Detección Precoz del Cáncer/métodos , Femenino , Papillomavirus Humano 16 , Papillomavirus Humano 18 , Humanos , Papillomaviridae , Embarazo , Estudios Retrospectivos , Neoplasias del Cuello Uterino/patologíaRESUMEN
Efficient treatment of challenging oily emulsion wastewater can alleviate water pollution to provide more chances for water reuse and resource recovery. Despite their promising application potential, conventional porous ceramic membranes have challenging bottleneck issues such as high cost and insufficient permeance. This study presents a new strategy for highly efficient treatment of not only synthetic but real oily emulsions via unexpensive whisker-constructed ceramic membranes, exhibiting exceptional permeance and less energy input. Compared with common ceramic membranes, such lower-cost mullite membranes with a novel whisker-constructed structure show higher porosity and water permeance, and better surface oleophobicity in water. Treatment performance such as permeate flux and oil rejection was explored for the oily emulsions with different properties under key operating parameters. Furthermore, classical Hermia models were used to reveal membrane fouling mechanism to well understand the microscopic interactions between emulsion droplets and membrane interface. Even for real acidic oily wastewater, such membranes also exhibit high permeance and less energy consumption, outperforming most state-of-the-art ceramic membranes. This work provides a new structure concept of highly permeably whisker-constructed porous ceramic membranes that can efficiently enable more water separation applications.
Asunto(s)
Aguas Residuales , Purificación del Agua , Animales , Cerámica , Membranas Artificiales , Porosidad , VibrisasRESUMEN
The direct usage of CO2 in the flue gas to produce fuels or chemicals is of great significance from energy-saving and low-cost perspectives, yet it is still underexplored. Herein, we report the photoreduction of CO2 from the simulated industrial exhaust by synergistic catalysis of TEOA and a metal-free composite (COF1-g-C3N4) fabricated via covalently grafting COF1 with g-C3N4. The hydrogen bond interaction between TEOA and hydrazine units on COF1 is detected in diluted CO2, which leads to significantly enhanced light absorption in the whole visible-light region. Also, the photo-induced electrons undergo fast transfer from COF1 to g-C3N4. This kind of dynamic interface with enhanced light absorption and electron transfer effects promotes the photosynthetic yield of syngas to 165.6 µmol·g-1·h-1 with the use of simulated exhaust gas as a raw material directly. The photosynthetic yield of syngas ranks among the highest of known metal-free catalysts in diluted CO2. This work provides a general rule for designing efficient catalysts via a controlled catalytic interface and new insights into the role of TEOA in photochemical CO2 reduction.
RESUMEN
BACKGROUND: The significance of HPV viral load in the detection of cervical lesions is still controversial. This study analyzed the correlation between the high-risk HPV viral load and different cervical lesion degrees. METHODS: This retrospective study included women positive for high-risk HPV DNA and screened for cervical lesions between 01/2015 and 06/2018. The high-risk HPV DNA load was measured by the second-generation Hybrid Capture technology and classified as low, moderate, and high. Colposcopy and biopsy were performed in all patients. The patients were grouped as normal, cervical intraepithelial neoplasia (CIN) grade 1, CIN grade 2, CIN grade 3, and cervical cancer. Multivariable logistic regression was performed to explore the association between high-risk HPV DNA load and cervical lesions. The odds ratios (ORs) represent the odds for increasing from low to high viral load. RESULTS: Finally, 265 patients were grouped as normal (n = 125), CIN 1 (n = 51), CIN 2 (n = 23), CIN 3 (n = 46), and cervical cancer (n = 20). Among them, 139 (52.5%) had a low viral load, 90 (34.0) had a moderate viral load, and 36 (13.4%) had a high viral load. Taking the normal control group as a reference, a high viral load was an independent factor for CIN 1 (OR = 3.568, 95% CI: 1.164-10.941, P = 0.026), CIN 2 (OR = 6.939, 95% CI: 1.793-26.852, P = 0.005), CIN 3 (OR = 7.052, 95% CI: 2.304-21.586, P = 0.001), and cervical cancer (OR = 8.266, 95% CI: 2.120-32.233, P = 0.002). CONCLUSIONS: Among women who underwent cervical biopsy, higher high-risk HPV viral load in cervical lesions was associated with a higher risk of high-grade cervical lesions.
Asunto(s)
Infecciones por Papillomavirus , Displasia del Cuello del Útero , Neoplasias del Cuello Uterino , Femenino , Humanos , Infecciones por Papillomavirus/complicaciones , Infecciones por Papillomavirus/diagnóstico , Estudios Retrospectivos , Neoplasias del Cuello Uterino/diagnóstico , Carga Viral , Displasia del Cuello del Útero/diagnósticoRESUMEN
Many warehouse slotting algorithms have overlooked worker ergonomics. This research aimed to develop ergonomics slotting guidelines based upon the back and shoulder postures and electromyographic (EMG) responses of the deltoid and erector spinae muscles when individual items are picked from, or full cases replenished to, different shelf heights In the first study of two studies, participants lifted small items representative of piece-pick tasks from seven shelf heights. In the second study, participants performed a simulated full case replenishment task in which they lifted boxes weighing between 2.7 and 10.9 kg from a cart into a flow rack. Shelf height significantly affected all postural and EMG variables and there was a trade-off between back and shoulder muscle activity across the varying shelf heights. Together, these studies were used to develop some general ergonomic slotting guidelines that could be implemented to reduce biomechanical load exposures experienced by distribution center workers.
Asunto(s)
Ergonomía , Postura , Fenómenos Biomecánicos , Electromiografía , Humanos , Músculo EsqueléticoRESUMEN
Photocatalytic carbon dioxide reduction (CO2RR) is considered to be a promising sustainable and clean approach to solve environmental issues. Polyoxometalates (POMs), with advantages in fast, reversible, and stepwise multiple-electron transfer without changing their structures, have been promising catalysts in various redox reactions. However, their performance is often restricted by poor thermal or chemical stability. In this work, two transition-metal-modified vanadoborate clusters, [Co(en)2]6[V12B18O54(OH)6]·17H2O (V12B18-Co) and [Ni(en)2]6[V12B18O54(OH)6]·17H2O (V12B18-Ni), are reported for photocatalytic CO2 reduction. V12B18-Co and V12B18-Ni can preserve their structures to 200 and 250 °C, respectively, and remain stable in polar organic solvents and a wide range of pH solutions. Under visible-light irradiation, CO2 can be converted into syngas and HCOO- with V12B18-Co or V12B18-Ni as catalysts. The total amount of gaseous products and liquid products for V12B18-Co is up to 9.5 and 0.168 mmol g-1 h-1. Comparing with V12B18-Co, the yield of CO for V12B18-Ni declines by 1.8-fold, while that of HCOO- increases by 35%. The AQY of V12B18-Co and V12B18-Ni is 1.1% and 0.93%, respectively. These values are higher than most of the reported POM materials under similar conditions. The density functional theory (DFT) calculations illuminate the active site of CO2RR and the reduction mechanism. This work provides new insights into the design of stable, high-performance, and low-cost photocatalysts for CO2 reduction.