Indole-3-acetic acid regulating the initial adhesion of microalgae in biofilm formation.

Regulating the microalgal initial adhesion in biofilm formation is a key approach to address the challenges of attached microalgae cultivation. As a type of phytohormone, Indole-3-acetic acid (IAA) can promote the growth and metabolism of microalgae. However, limited knowledge has been acquired of how IAA can change the initial adhesion of microalgae in biofilm formation. This study focused on investigating the initial adhesion of microalgae under different IAA concentrations exposure in biofilm formation. The results showed that IAA showed obvious hormesis-like effects on the initial adhesion ability of microalgae biofilm. Under exposure to the low concentration (0.1 mg/L) of IAA, the initial adhesion quantity of microalgae on the surface of the carrier reached the highest value of 7.2 g/m2. However, exposure to the excessively high concentration (10 mg/L) of IAA led to a decrease in the initial adhesion capability of microalgal biofilms. The enhanced adhesion of microalgal biofilms due to IAA was attributed to the upregulation of genes related to the Calvin Cycle, which promoted the synthesis of hydrophobic amino acids, leading to increased protein secretion and altering the surface electron donor characteristics of microalgal biofilms. This, in turn, reduced the energy barrier between the carriers and microalgae. The research findings would provide crucial support for the application of IAA in regulating the operation of microalgal biofilm systems.

Improving Tuber Yield of Tiger Nut (Cyperus esculentus L.) through Nitrogen Fertilization in Sandy Farmland.

The cultivation of tiger nut (Cyperus esculentus L.) on marginal lands is a feasible and effective way to increase food production in Northern China. However, the specific influence of nitrogen fertilizer application on the growth dynamics, tuber expansion, overall yield, and nitrogen use efficiency (NUE) of tiger nuts cultivated on these sandy lands is yet to be fully elucidated. From 2021 to 2022, we conducted a study to determine the effect of N fertilizers on the leaf function morphology, canopy apparent photosynthesis (CAP), tuber yield, and NUE of tiger nut. The results indicate that the tuber yield and NUE are closely related to the specific leaf area (SLA), leaf area index (LAI), leaf nitrogen concentration per area (NA), CAP, and tuber expansion characteristics. Notably, significant enhancements in the SLA, LAI, NA, and CAP during the tuber expansion phase ranging from the 15th to the 45th day under the 300 kg N ha-1 treatment were observed, subsequently leading to increases in both the tuber yield and NUE. Moreover, a maximum average tuber filling rate was obtained under the N300 treatment. These improvements led to substantial increases in the tuber yield (32.1-35.5%), nitrogen agronomic efficiency (NAE, 2.1-5.3%), nitrogen partial factor productivity (NPP, 4.8-8.1%), and nitrogen recovery efficiency (NRE, 3.4-5.7%). Consequently, 300 kg N ha-1 of N fertilizers is the most effective dose for optimizing both the yield of tiger nut tubers and the NUE of tiger nut plants in marginal soils. Structural equation modeling reveals that N application affects the yield and NUE through its effects on leaf functional traits, the CAP, and the tuber filling characteristics. Modeling indicates that tuber expansion characteristics primarily impact the yield, while CAP predominantly governs the NUE. Above all, this study highlights the crucial role of N fertilizer in maximizing the tiger nut tuber yield potential on marginal lands, providing valuable insights into sustainable farming in dry areas.

Synchronous Photoactivation-Imaging Fluorophores Break Limitations of Photobleaching and Phototoxicity in Live-cell Microscopy.

Fluorescence microscopy is one of the most important tools in the studies of cell biology and many other fields, but two fundamental issues, photobleaching and phototoxicity, associated with the fluorophores have still limited its use for long-term and strong-illumination imaging of live cells. Here, we report a new concept of fluorophore engineering chemistry, synchronous photoactivation-imaging (SPI) fluorophores, activating and exciting fluorophores by a single light source to thus avoid the repeated switches between activation and excitation lights. The chemically reconstructed, nonemissive fluorophores can be photolyzed to allow continuous replenishing of "bright-state" probes detectable by standard fluorescent microscopes in the imaging process so as to bypass the photobleaching barrier to greatly extend the imaging period. Equally importantly, SPI fluorophores substantially reduce photocytotoxicity due to the scavenging of reactive oxygen species (ROS) by a photoactivable group and the slow release of "bright-state" probes to minimize ROS generation. Using SPI fluorophores, the time-lapsed confocal (>16 h) and super-resolution (>3 h) imaging of subcellular organelles under intensive illumination (50 MW/cm2) were achieved in live cells.

High stability and strong luminescence CsPbBr3-Cs4PbBr6 thin films for all-inorganic perovskite light-emitting diodes.

All-inorganic lead halide perovskite, characterized by its exceptional optical and electrical properties, is burgeoning as a potential optoelectronic material. However, the standalone CsPbBr3 component encounters several challenges including small exciton binding energy (≈40 meV) and long charge diffusion length, giving rise to low photo-luminescence quantum-yield (PLQY); ion migration leads to instability in device operation, hindering device operation and potential development. To circumvent these limitations, our research endeavors to construct a novel core-shell structure that transforms the continuous [PbX6]4- octahedron into an isolated octahedral structure. We introduce the Cs4PbBr6 phase with 0D structure to passivate the vacancy defects in CsPbBr3, thereby suppressing ion migration and enhancing the luminescence intensity and stability. Our methodology involves fabricating dense CsPbBr3-Cs4PbBr6 composite films using a co-evaporation method, wherein the molar ratio of CsBr and PbBr2 is precisely adjusted. The films are subsequently rapidly annealed under ambient air conditions, and the effects of different annealing temperatures and annealing times on the CsPbBr3-Cs4PbBr6 films were investigated. Our results demonstrate significantly improved stability of the annealed films, with a mere 15% decrease in PL intensity after 100 days of storage under ambient air conditions at 48% relative humidity (RH). Based on this thin film, we fabricated all-inorganic structure Ag/N-Si/CsPbBr3-Cs4PbBr6/NiO/ITO light emitting diodes (LEDs), the devices have a low turn-on voltage VT ∼3 V and under unencapsulated, ambient air conditions, it can operate continuously for 12 hours under DC drive with only 10% attenuation. The results we obtained open up the possibility of designing and developing air-stable perovskite LEDs.

Recovering rare earth elements via immobilized red algae from ammonium-rich wastewater.

Biotreatment of acidic rare earth mining wastewater via acidophilic living organisms is a promising approach owing to their high tolerance to high concentrations of rare earth elements (REEs); however, simultaneous removal of both REEs and ammonium is generally hindered since most acidophilic organisms are positively charged. Accordingly, immobilization of acidophilic Galdieria sulphuraria (G. sulphuraria) by calcium alginate to improve its affinity to positively charged REEs has been used for simultaneous bioremoval of REEs and ammonium. The results indicate that 97.19%, 96.19%, and 98.87% of La, Y, and Sm, respectively, are removed by G. sulphuraria beads (GS-BDs). The adsorption of REEs by calcium alginate beads (BDs) and GS-BDs is well fitted by both pseudo first-order (PFO) and pseudo second-order (PSO) kinetic models, implying that adsorption of REEs involves both physical adsorption caused by affinity of functional groups such as -COO- and -OH and chemical adsorption based on ion exchange of Ca2+ with REEs. Notably, GS-BDs exhibit high tolerance to La, Y, and Sm with maximum removal efficiencies of 97.9%, 96.6%, and 99.1%, respectively. Furthermore, the ammonium removal efficiency of GS-BDs is higher than that of free G. sulphuraria cells at an initial ammonium concentration of 100 mg L-1, while the efficiency decreases when initial concentration of ammonium is higher than 150 mg L-1. Last, small size of GS-BDs favors ammonium removal because of their lower mass transfer resistance. This study achieves simultaneous removal of REEs and ammonium from acidic mining drainage, providing a potential strategy for biotreatment of REE tailing wastewater.

Modeling Androgen Deprivation Therapy-Induced Prostate Cancer Dormancy and Its Clinical Implications.

Treatment-induced tumor dormancy is a state in cancer progression where residual disease is present but remains asymptomatic. Dormant cancer cells are treatment-resistant and responsible for cancer recurrence and metastasis. Prostate cancer treated with androgen-deprivation therapy (ADT) often enters a dormant state. ADT-induced prostate cancer dormancy remains poorly understood due to the challenge in acquiring clinical dormant prostate cancer cells and the lack of representative models. In this study, we aimed to develop clinically relevant models for studying ADT-induced prostate cancer dormancy. Dormant prostate cancer models were established by castrating mice bearing patient-derived xenografts (PDX) of hormonal naïve or sensitive prostate cancer. Dormancy status and tumor relapse were monitored and evaluated. Paired pre- and postcastration (dormant) PDX tissues were subjected to morphologic and transcriptome profiling analyses. As a result, we established eleven ADT-induced dormant prostate cancer models that closely mimicked the clinical courses of ADT-treated prostate cancer. We identified two ADT-induced dormancy subtypes that differed in morphology, gene expression, and relapse rates. We discovered transcriptomic differences in precastration PDXs that predisposed the dormancy response to ADT. We further developed a dormancy subtype-based, predisposed gene signature that was significantly associated with ADT response in hormonal naïve prostate cancer and clinical outcome in castration-resistant prostate cancer treated with ADT or androgen-receptor pathway inhibitors. IMPLICATIONS: We have established highly clinically relevant PDXs of ADT-induced dormant prostate cancer and identified two dormancy subtypes, leading to the development of a novel predicative gene signature that allows robust risk stratification of patients with prostate cancer to ADT or androgen-receptor pathway inhibitors.

Revealing dual roles of g-C3N4 in Chlorella vulgaris cultivation.

Booming graphitic carbon nitride (g-C3N4) photocatalyzed water splitting increases crisis of aquatic contamination. However, a controversial understanding regarding effect of g-C3N4 on growth of microalgae still exists. Accordingly, Chlorella vulgaris were cultured in 0-250 mg/L of g-C3N4 with biomass named as C-0, C-50, C-100, C-150, C-200, and C-250, respectively. g-C3N4 below 200 mg/L was beneficial to short-term cultivation of microalgae, while it was harmful to long-time cultivation. Protein factions of C-0, C-100, and C-250 were 41.4, 42.3, and 36.4 wt%, while their lipid factions varied from 21.5, 16.9, to 17.8 wt%, respectively. In short-term cultivation, superoxide dismutase's activity of C-0, C-150, and C-250 increased dramatically, while accumulated H2O2 led to increased activity of catalase. However, it started to decrease once antioxidant enzymes were per-oxidized, leading to increase of malondialdehyde content. In long-term cultivation, activities of superoxide dismutase, catalase and malondialdehyde content decreased dramatically owning to peroxidation of algae. Scavenger tests with tertiary butanol and triethanolamine implied that·OH was dominate parameter affecting growth of microalgae. This work indicates that g-C3N4 below 200 mg/L is propitious to short-term cultivation of microalgae, while it is bad to long-time cultivation of microalgae, revealing dual rules of g-C3N4 in Chlorella vulgaris cultivation.

Multi-Epitope Vaccine Design Using an Immunoinformatic Approach for SARS-CoV-2.

Through 4 June 2021, COVID-19 has caused over 172.84 million cases of infection and 3.71 million deaths worldwide. Due to its rapid dissemination and high mutation rate, it is essential to develop a vaccine harboring multiple epitopes and efficacious against multiple variants to prevent the immune escape of SARS-CoV-2. An in silico approach based on the viral genome was applied to identify 19 high-immunogenic B-cell epitopes and 499 human leukocyte antigen (HLA)-restricted T-cell epitopes. Thirty multi-epitope peptide vaccines were designed by iNeo-Suite and manufactured by solid-phase synthesis. Docking analysis confirmed stable hydrogen bonds of epitopes with their corresponding HLA alleles. When four peptide candidates derived from the spike protein of SARS-CoV-2 were selected to immunize mice, a significantly larger amount of total IgG in serum, as well as an increase of CD19+ cells in the inguinal lymph nodes, were observed in the peptide-immunized mice compared to the control. The ratios of IFN-γ-secreting lymphocytes in CD4+ or CD8+ T-cells in the peptide-immunized mice were higher than those in the control mice. There were also a larger number of IFN-γ-secreting T-cells in the spleens of peptide-immunized mice. The peptide vaccines in this study successfully elicited antigen-specific humoral and cellular immune responses in mice. To further validate the safety and efficacy of this vaccine, animal studies using a primate model, as well as clinical trials in humans, are required.

Bio-removal of PtCl62- complex by Galdieria sulphuraria.

Bio-removal of negative charged platinum complex is of great challenge owing to electrostatic repulsions between PtCl62- and general extracellular polymeric substance (EPS) of microorganism. Galdieria sulphuraria (GS) are thermophilic and acidophilic microalga with specific metabolism, which subsequently lead to their unique cellular compositions such as EPS and phycocyanin, possibly providing a strategy to deal with negative charged metal complex. Accordingly, G. sulphuraria are employed to remove negative charged PtCl62- complex with initial concentrations ranging from 0, 10, 20, 30, to 45 ppm. The growth rates of G. sulphuraria with microalgae named as GS-0, GS-10, GS-20, GS-30, and GS-45, respectively, and simultaneously bio-removal efficiencies of PtCl62- are investigated. G. sulphuraria are independent to PtCl62- within 0-30 ppm, while they are inhibited within 45 ppm of PtCl62-. The PtCl62- removal efficiencies of GS-10, GS-20, and GS-30 increase from 94.58%, 95.52%, to 95.92%, while decrease to 71.81% of GS-45. About 92.39%, 93.77%, 94.29%, and 75.21% of PtCl62- adsorbed are accumulated within GS-10, GS-20, GS-30, GS-45, with few in EPS. The PtCl62- complexes accumulated in EPS and algae cells are possibly decomposed to PtCl4 according to the increasing zeta potentials of EPS and algae cells. The results indicate that PtCl62- is efficiently removed by G. sulphuraria, achieving bio-removal of negative charged PtCl62- complex from wastewater.

Keggin-type Heteropolyacids-Catalyzed Selective Hydrothermal Oxidation of Microalgae for Low Nitrogen Biofuel Production.

Hydrothermal liquefaction (HTL) of microalgae for biofuel production is suffering from low bio-oil yield and high heteroatomic compositions owing to their low efficiency and selectivity to hydrolysis of cellular compounds. Hereby we report Keggin-type (Mo-V-P) heteropolyacids (HPAs)-catalyzed HTL of microalgae for efficient low-nitrogen biocrude production. The increases of reaction temperature, reaction time, and vanadium substitution degrees of HPAs are favorable to biocrude yield initially, whereas a significant decrease of biocrude yield is observed owing to the enhanced oxidation of carbohydrates above the optimum reaction conditions. The maximum biocrude yield of HPAs-catalyzed HTL of microalgae is 29.95 % at reaction temperature of 300 °C, reaction time of 2 h, and 5 wt% of HPA-4, which is about 19.66 % higher than that of control with 71.17 % less N-containing compounds, including 1,3-propanediamine, 1-pentanamine, and 2, 2'-heptamethylene-di-2-imidazoline than that of control. This work reveals that HPAs with Brønsted acidity and reversible redox properties are capable of both enhancing biocrude production via catalyzing the hydrolysis of cellular compounds and reducing their nitrogen content through avoiding the Maillard reactions between the intermediates of hydrolysis of carbohydrates and proteins. HPAs-catalyzed HTL is an efficient strategy to produce low N-containing biofuels, possibly paving the way of their direct use in modern motors.

A Mini Review on Superhydrophobic and Transparent Surfaces.

In recent years, self-cleaning and transparent surfaces have been widely studied for application on smart windows, solar panels, camera lenses, and other optoelectronic devices. The self-cleaning properties can possibly extend the lifetime of these products and decrease, even eliminate, the requirement of chemical detergents and high labor costs of cleaning. It can also promote the overall efficiency of outdoor optoelectronic devices (e. g. solar cell panels) since dirt accumulation and bacteria growth can be slowed down, even inhibited on such surfaces. In this mini review, the fundamentals and conditions that govern superhydrophobicity and transparency are introduced, followed by the discussion of roughness as the competing factor for superhydrophobicity and transparency. Representative examples of the surface design and fabrication are introduced and future perspectives are shared. This mini review can help the research community better understand such surfaces and further accelerate its development for innovative practical applications.

Treatment of high-nitrate wastewater mixtures from MnO2 industry by Chlorella vulgaris.

The aim of this work was to study the biotreatment of mixed wastewaters collected from two points of MnO2 industry by Chlorella vulgaris. Their growth rates in four mixed wastewaters with mass ratio of wastewater 1#:2# of 20:1, 50:1, 100:1, and 200:1 were characterized, and the lag phase was shortened with increase of nitrate concentrations. The N, P, and metal removal kinetics were quantified each other day to evaluate the bio-treatment efficiencies of high-nitrate wastewaters from MnO2 industry. 84.68% and 98% of N, P has been removed. The Ca, Zn, Mn, and Si in mixed wastewaters was removed with maximum removal efficiencies of 97.91%, 99.37%, 99.44%, and 81.68%, respectively. The compositions of Chlorella vulgaris cultured in mixed wastewaters, including proteins, lipids, ash contents, and carbohydrates, were investigated in detail. The optimum HHV of Chlorella vulgaris about 18 MJ/Kg presented a potential to decrease the cost of algal biofuel.

The Cross-Entropy Based Multi-Filter Ensemble Method for Gene Selection.

The gene expression profile has the characteristics of a high dimension, low sample, and continuous type, and it is a great challenge to use gene expression profile data for the classification of tumor samples. This paper proposes a cross-entropy based multi-filter ensemble (CEMFE) method for microarray data classification. Firstly, multiple filters are used to select the microarray data in order to obtain a plurality of the pre-selected feature subsets with a different classification ability. The top N genes with the highest rank of each subset are integrated so as to form a new data set. Secondly, the cross-entropy algorithm is used to remove the redundant data in the data set. Finally, the wrapper method, which is based on forward feature selection, is used to select the best feature subset. The experimental results show that the proposed method is more efficient than other gene selection methods and that it can achieve a higher classification accuracy under fewer characteristic genes.

[Continual improvement of quantitative analytical method development of Panax notogineng saponins based on quality by design].

This study is aimed to propose a continual improvement strategy based on quality by design (QbD). An ultra high performance liquid chromatography (UPLC) method was developed to accomplish the method transformation from HPLC to UPLC of Panax notogineng saponins (PNS) and achieve the continual improvement of PNS based on QbD, for example. Plackett-Burman screening design and Box-Behnken optimization design were employed to further understand the relationship between the critical method parameters (CMPs) and critical method attributes (CMAs). And then the Bayesian design space was built. The separation degree of the critical peaks (ginsenoside Rg1 and ginsenoside Re) was over 2.0 and the analysis time was less than 17 min by a method chosen from the design space with 20% of the initial concentration of the acetonitrile, 10 min of the isocratic time and 6%•min⁻¹ of the gradient slope. At last, the optimum method was validated by accuracy profile. Based on the same analytical target profile (ATP), the comparison of HPLC and UPLC including chromatograph method, CMA identification, CMP-CMA model and system suitability test (SST) indicated that the UPLC method could shorten the analysis time, improve the critical separation and satisfy the requirement of the SST. In all, HPLC method could be replaced by UPLC for the quantity analysis of PNS.

Polyfuran-Derived Microporous Carbons for Enhanced Adsorption of CO2 and CH4.

Oxygen-doped microporous carbons were synthesized by chemical activation of polyfuran with KOH or ZnCl2 at 600 and 800 °C. It was found that KOH preserves and ZnCl2 eliminates the O-C functional groups in the activation process. The O-doped carbon activated with KOH at 800 °C exhibited a high CO2 capacity (4.96 mmol g(-1), 273 K, 1 bar) and CH4 adsorption capacity (2.27 mmol g(-1), 273 K, 1 bar). At 298 K and 1 bar, a very high selectivity for separating CO2/N2 (41.7) and CO2/CH4 (6.8) gas mixture pairs was obtained on the O-doped carbon activated with KOH at 600 °C. The excellent separation ability of the O-doped carbons was demonstrated in transient breakthrough simulations of CO2/CH4/N2 mixtures in a fixed bed adsorber. The isosteric adsorption heats of the O-doped carbons were also significantly lower than those of MOF-74 and NaX zeolite. The O-doped microporous carbon adsorbents appear to be a very promising adsorbent for CO2 capture from flue gas, biogas upgrading, and CH4 storage.

Optimization of microwave-enhanced methanolysis of algal biomass to biodiesel under temperature controlled conditions.

The effect of a "controlled temperature" approach was investigated in the microwave-enhanced simultaneous extraction and transesterification of dry algae. Experimental runs were designed using a response surface methodology (RSM). The process parameters such as dry algae to methanol ratio, reaction time, and catalyst concentrations were optimized to evaluate their effects on the fatty acid methyl ester (FAME) yield under the "controlled temperature" conditions. Thermal energy associated with the microwave transesterification process was calculated at various temperature levels using the optimized process parameters. Algal biomass characterization and algal biodiesel analysis were carried out using various analytical instruments such as FTIR, TEM, GC-MS and confocal laser scanning microscopy. Thermogravimetric analysis under both nitrogen and oxygen environments was performed to examine the thermal and oxidative stability of the algal fatty acid methyl esters.

Easy synthesis of hollow core, bimodal mesoporous shell carbon nanospheres and their application in supercapacitor.

Hollow core, mesoporous shell carbon nanospheres (HCMSs) with large bimodal mesopores (6.4 and 3.1 nm) and high surface area (1704 m(2) g(-1)) have been synthesized by a triconstituent surface co-assembly of monodisperse silica nanospheres method. The resulted HCMS show a high specific capacity of 251 F g(-1) at 50 mV s(-1) in 2 M H(2)SO(4) and long cyclic life.

Evolution of the initial hole in vertically vibrated shear thickening fluids.

The apparent viscosity of shear thickening fluid (STF) changes dramatically with the applied shear rate, which is a typical rheological property of STF. Such a rheological property affects the vertically vibrated dynamic property of STF. In order to get a better understanding of the vertically vibrated dynamic properties of STF, the surface instabilities in vertically vibrated STF, which was prepared by suspending polymethylmethacrylate particles in ethylene glycol, are investigated. Above a critical driving acceleration, the surface instability transforms from the disappearance to the fission of the initial hole, which is produced by applying a finite perturbation to the surface. The time required for the initial hole to disappear can be affected by the driving acceleration, vibration frequency, volume fraction, thickness, and shape and size of the perturbation. A possible model is proposed, and the expressions of hydrostatic force and viscous dissipative force are employed to clarify the relationship between disappearance of the hole and shear thickening effect. The fission and spreading follow a hexagonal arrangement. At a higher acceleration, the holes cover the entire surface in a state of disorder. The mechanism for the initial hole's evolution in vertically vibrated shear thickening fluids is discussed.