RESUMEN
The gate-type carbon nanotubes cathodes exhibit advantages in long-term stable emission owing to the uniformity of electrical field on the carbon nanotubes, but the gate inevitably reduces the transmittance of electron beam, posing challenges for system stabilities. In this work, we introduce electron beam focusing technique using the self-charging SiNx/Au/Si gate. The potential of SiNx is measured to be approximately -60 V quickly after the cathode turning on, the negative potential can be maintained as the emission goes on. The charged surface generates rebounding electrostatic forces on the following electrons, significantly focusing the electron beam on the center of gate hole and allowing them to pass through gate with minimal interceptions. An average transmittance of 96.17% is observed during 550 hours prototype test, the transmittance above 95% is recorded for the cathode current from 2.14 µA to 3.25 mA with the current density up to 17.54 mA cm-2.
RESUMEN
Self-powering electronics by harvesting mechanical energy has been widely studied, but most self-powering processes require a long time in the energy harvesting procedure, resulting in low efficiency or even system failure in some specific applications such as instantaneous sensor signal acquisition and transmission. In order to achieve efficient self-powered sensing, we design and construct an instantaneous self-powered sensing system, which puts heavy requirements on generator's power and power management circuit. Theoretical analysis and experimental results over two types of generators prove that the planar-structured rotary triboelectric nanogenerator possesses many advantages over electromagnetic generator for the circumstances of instantaneous self-powering. In addition, an instantaneous driving mode power management circuit is also introduced showing advanced performance for the instantaneous self-powering sensing system. As a proof-of-concept, an integrated instantaneous self-powered sensing system is demonstrated based on Radio-Frequency transmission. This work demonstrates the potential of instantaneous self-powered sensing systems to be used in a wide range of applications such as smart home, environment monitoring, and security surveillance.