RESUMEN
Ducks (Anatinae) play a crucial role in wetland ecosystems, contributing to seed dispersal and nutrient cycling. This study investigates the skeletal adaptations of three duck species: the Mallard (Anas platyrhynchos), Tufted Duck (Aythya fuligula), and Green-Winged Teal (Anas crecca). The focus is on the tibiotarsus and humerus bones to understand how these adaptations support their different locomotion and habitat preferences. Bone samples n = 6 of deceased ducks (both male and female) from each species (for a total of 36 samples) were cleaned and measured for length, weight, and density. Dual-energy X-ray absorptiometry was used to determine bone mineral density (BMD) and bone mineral content (BMC), and mechanical properties like yield force and stiffness were tested using a 3-point bending test. The results show significant differences in body weight, bone weight, and bone length among the species, with Mallards being the largest and Teals the smallest. Male Teals displayed higher relative bone weight (RBW) in their tibia compared to male Mallards, and male Mallards had significantly lower RBW in the humerus compared to the other species. Female Teals had higher RBW than the other species. Teals also exhibited much lower BMD in the tibia, whereas female Mallards had lower BMD in the humerus. The Seedor index revealed that male Mallards had the highest values in the tibia, while female Teals had the lowest. Mechanical testing indicated that Teals had lower yield force and breaking force in the tibia, whereas Mallards showed the highest stiffness in both bones. Tufted Ducks had intermediate values, consistent with their diving behaviour. These findings suggest that the Mallard's robust bones support its adaptability to various environments and diverse locomotion and foraging strategies. The Teal's lighter and less dense bones facilitate rapid flight and agility in shallow wetlands. The Tufted Duck's intermediate bone characteristics reflect its specialization in diving, requiring a balance of strength and flexibility. Understanding these skeletal differences may provide valuable insights into the evolutionary biology and biomechanics of these species, aiding in their conservation and enhancing our knowledge of their roles in wetland ecosystems. By exploring the functional morphology of these ducks, this study aims to shed light on the biomechanical mechanisms that underpin their locomotion and foraging behaviours.
RESUMEN
Chronic pancreatitis (CP), a progressive inflammatory disease, poses diagnostic challenges due to its initially asymptomatic nature. While CP's impact on exocrine and endocrine functions is well-recognized, its potential influence on other body systems, particularly in young individuals, remains underexplored. This study investigates the hypothesis that CP in growing pigs leads to alterations in articular cartilage and subchondral bone, potentially contributing to osteoarthritis (OA) development. Utilizing a pig model of cerulein-induced CP, we examined the structural and compositional changes in subchondral bone, articular cartilage, and synovial fluid. Histological analyses, including Picrosirius Red and Safranin-O staining, were employed alongside immuno-histochemistry and Western blotting techniques. Our findings reveal significant changes in the subchondral bone, including reduced bone volume and alterations in collagen fiber composition. Articular cartilage in CP pigs exhibited decreased proteoglycan content and alterations in key proteins such as MMP-13 and TGF-ß1, indicative of early cartilage degradation. These changes suggest a link between CP and musculoskeletal alterations, underscoring the need for further research into CP's systemic effects. Our study provides foundational insights into the relationship between CP and skeletal health, potentially guiding future pediatric healthcare strategies for early CP diagnosis and management.
Asunto(s)
Cartílago Articular , Osteoartritis , Humanos , Animales , Niño , Porcinos , Cartílago Articular/metabolismo , Huesos/metabolismo , Osteoartritis/metabolismo , Proteoglicanos/metabolismo , Líquido Sinovial/metabolismoRESUMEN
This study aimed to investigate the effect of raw waste pine wood dust (Pinus sylvestris) from furniture production on polysaccharide biopolymer film properties. The obtained biocomposite films produced via the casting method were prepared with 20% glycerol and 0%, 5%, 10%, 15%, 20%, and 25% of added wood dust in relation to the dry starch matter. Wood dust composition and particle size distribution analysis were performed. In order to evaluate the material surface properties, tests were carried out using an atomic force microscope (AFM) and a contact angle goniometer. Utilising uniaxial tensile test methodology, the values for both tensile strength and Young's modulus were determined. In addition, the barrier properties, water solubility index, and colour were also investigated. The research showed that wood dust affected the functional parameters of the obtained biocomposites. A wood dust content increase causes the Young's modulus value to rise with a progressive decrease in the max. strain. The filler did not change the films' wetting properties, and each had a hydrophilic surface regardless of the additive amount. The bio-sourced composites obtained were non-toxic and environmentally neutral materials, suitable to be applied in the packaging industry as well as the agriculture sector.
RESUMEN
In the animal kingdom, continuously erupting incisors provided an attractive model for studying the enamel matrix and mineral composition of teeth during development. Enamel, the hardest mineral tissue in the vertebrates, is a tissue sensitive to external conditions, reflecting various disturbances in its structure. The developing dental enamel was monitored in a series of incisor samples extending the first four weeks of postnatal life in the spiny mouse. The age-dependent changes in enamel surface morphology in the micrometre and nanometre-scale and a qualitative assessment of its mechanical features were examined by applying scanning electron microscopy (SEM) and atomic force microscopy (AFM). At the same time, structural studies using XRD and vibrational spectroscopy made it possible to assess crystallinity and carbonate content in enamel mineral composition. Finally, a model for predicting the maturation based on chemical composition and structural factors was constructed using artificial neural networks (ANNs). The research presented here can extend the existing knowledge by proposing a pattern of enamel development that could be used as a comparative material in environmental, nutritional, and pharmaceutical research.
RESUMEN
The presented paper introduces principal component analysis application for dimensionality reduction of variables describing speech signal and applicability of obtained results for the disturbed and fluent speech recognition process. A set of fluent speech signals and three speech disturbances-blocks before words starting with plosives, syllable repetitions, and sound-initial prolongations-was transformed using principal component analysis. The result was a model containing four principal components describing analysed utterances. Distances between standardised original variables and elements of the observation matrix in a new system of coordinates were calculated and then applied in the recognition process. As a classifying algorithm, the multilayer perceptron network was used. Achieved results were compared with outcomes from previous experiments where speech samples were parameterised with the Kohonen network application. The classifying network achieved overall accuracy at 76% (from 50% to 91%, depending on the dysfluency type).
Asunto(s)
Percepción del Habla , Tartamudeo , Humanos , Redes Neurales de la Computación , Análisis de Componente Principal , HablaRESUMEN
In the present study, starch/powdered activated carbon composite films were prepared by incorporating various amounts of powdered activated carbon (PAC)-1-5, 10, and 15 %-into a starch matrix, using the solvent casting method. The effect of PAC addition on the biopolymer film was investigated. The mechanical properties were examined by ultra-nanoindentation, nanoscratch, and micro-tensile tests. Since the mechanical properties of biopolymer films are correlated with their structure, the effect of PAC addition was tested using X-ray diffraction. The surface parameters morphology and wettability were analyzed by atomic force microscopy (AFM) and contact angle measurements. The barrier properties were examined by determining water vapor permeability and the water solubility index. The obtained results did not show a monotonic dependence of the mechanical parameters on PAC content, with the exception of the maximum strain, which decreased as the amount of the additive increased. The visible effect of PAC addition was manifested in changes in the adhesive force value and in water vapor permeability (WVP). The barrier properties decreased with the increase of the filler content.
RESUMEN
The potential of Fourier Transform infrared microspectroscopy (FTIR microspectroscopy) and multivariate analyses were applied for the classification of the frequency ranges responsible for the distribution changes of the main components of articular cartilage (AC) that occur during dietary ß-hydroxy-ß-methyl butyrate (HMB) supplementation. The FTIR imaging analysis of histological AC sections originating from 35-day old male piglets showed the change in the collagen and proteoglycan contents of the HMB-supplemented group compared to the control. The relative amount of collagen content in the superficial zone increased by more than 23% and in the middle zone by about 17%, while no changes in the deep zone were observed compared to the control group. Considering proteoglycans content, a significant increase was registered in the middle and deep zones, respectively; 62% and 52% compared to the control. AFM nanoindentation measurements collected from animals administered with HMB displayed an increase in AC tissue stiffness by detecting a higher value of Young's modulus in all investigated AC zones. We demonstrated that principal component analysis and artificial neural networks could be trained with spectral information to distinguish AC histological sections and the group under study accurately. This work may support the use and effectiveness of FTIR imaging combined with multivariate analyses as a quantitative alternative to traditional collagenous tissue-related histology.
Asunto(s)
Cartílago Articular/efectos de los fármacos , Valeratos/farmacología , Animales , Cartílago Articular/química , Cartílago Articular/metabolismo , Colágeno/metabolismo , Suplementos Dietéticos , Módulo de Elasticidad , Masculino , Redes Neurales de la Computación , Análisis de Componente Principal , Proteoglicanos/metabolismo , Espectroscopía Infrarroja por Transformada de Fourier , Porcinos , Valeratos/administración & dosificaciónRESUMEN
Starch films modified with additives are materials increasingly being used in the production of packaging. These types of biopolymers can, to a considerable degree, replace plastic, contributing to the reduction in both production and waste management costs. However, they should be characterised by specific mechanical and surface parameters which determine their application. In the presented work, the PeakForce Quantitative Nanomechanics Mapping (PFQNM) method was applied to analyse a starch-based biopolymer modified with two different kaolin clay contents (5% and 10%). The technique used facilitates the assessment of the correlation of Atomic Force Microscope AFM height parameters with nanomechanical ones which provide the definitions of mutual interactions and allow the possibility to analyse materials in respect of various details. The investigated material was mapped in the Derjaguin-Muller-Toporov (DMT) modulus, adhesion and height domains. The results obtained indicated the impact of additives on the determined parameters. Increases in the DMT modulus and the adhesion force, along with the kaolin content, were observed. The enhancement of starch films with kaolin clay also induced growth in the surface roughness parameters.
RESUMEN
Changes to the features of the enamel surface submitted to induced demineralisation and subsequent remineralisation were studied. The in vitro examination was conducted on polished slices of human molar teeth, divided in four groups: the untreated control (n = 20), challenged by a demineralisation with orthophosphoric acid (H3PO4) (n = 20), and challenged by a demineralisation following remineralisation with fluoride (F) varnish containing casein phosphopeptides (CPP) and amorphous calcium phosphate (ACP) compounds (n = 20). The specimens' enamel surfaces were subjected to analysis of structure, molecular arrangement, mechanical features, chemical composition, and crystalline organization of apatite crystals. Specimens treated with acid showed a significant decrease in crystallinity, calcium, and phosphorus levels as well as mechanical parameters, with an increase in enamel surface roughness and degree of carbonates when compared to the control group. Treatment with fluoride CPP-ACP varnish provided great improvements in enamel arrangement, as the destroyed hydroxyapatite structure was largely rebuilt and the resulting enamel surface was characterised by greater regularity, higher molecular and structural organisation, and a smoother surface compared to the demineralised one. In conclusion, this in vitro study showed that fluoride CPP-ACP varnish, by improving enamel hardness and initiating the deposition of a new crystal layer, can be an effective remineralising agent for the treatment of damaged enamel.
Asunto(s)
Caseínas/farmacología , Esmalte Dental/efectos de los fármacos , Fluoruros Tópicos/farmacología , Desmineralización Dental/tratamiento farmacológico , Caseínas/uso terapéutico , Esmalte Dental/química , Esmalte Dental/ultraestructura , Fluoruros Tópicos/química , Fluoruros Tópicos/uso terapéutico , Humanos , Fenómenos Mecánicos , Diente Molar/química , Diente Molar/efectos de los fármacos , Ácidos Fosfóricos/toxicidad , Desmineralización Dental/etiologíaRESUMEN
In the presented work the influence of different 3MgO·4SiO2·H2O (talc) contents in polypropylene samples on the structure, hardness, elasticity, and friction of the surface layer was investigated. The talc content ranged from 0 to 25 wt.%, and all the samples were obtained in the same conditions by the injection molding process. The analysis of the microstructure was performed by X-ray diffraction. Changes in the hardness and elasticity were determined for three different depths (300, 800, and 4000 nm) using an ultra nano tester. For the purpose of the examination of the friction properties of the obtained compounds, a nano-scratch tester was applied. Increasing the talc content caused growth in the indentation modulus and hardness values. Simultaneously, an effect of decreasing hardness and elastic modulus with increasing indentation depth was observed. The smallest effect size was observed for 25 wt.% talc content, which might suggest that talc addition increased the homogeneity of the observed composites. Scratch tests showed increasing scratch resistance along with increasing talc content for both constant and progressive loads. The growth in talc concentration led to a decrease in the degree of the polypropylene (PP) crystallinity of the surface layer. The exfoliation process occurred in PP composites.
RESUMEN
The aim of study was to investigate the influence of kaolin on the physical properties and utility of film produced from native starch. The work involved measurements of strength, structure, and thermal properties. The films were prepared by the casting method. Composite films with 0%, 5%, 10%, and 15% kaolin additives were examined. Measurements of mechanical properties were carried out using the uniaxial tensile test, the nanoindentation test, and nanoscratching. Surface properties were examined by atomic force microscopy and contact angle measurements. Structure was determined by the X-ray diffraction method, and thermal properties were determined by differential scanning calorimetry. A significant influence of kaolin on the strength parameters and thermal and barrier properties of composite films was found. An increase in kaolin content reduced the tensile strength, Young's modulus, and Poisson's ratio. Structural analysis showed a partial intercalation and the layered arrangement of kaolin particles. Kaolin additives increased the barrier properties of water vapor in composite films of about 9%. Biopolymer modification by nanoclay reduced the thermal stability of composite films by 7% and could accelerate the biodegradation process. Increasing the concentration of kaolin in the biopolymer matrix led to heightened surface roughness (approximately 64%) and wettability of the surfaces of the film composites of 58%.
RESUMEN
Structural changes in the enamel surface subjected to induced demineralization and assessment of the influence of prenatal administration of ß-hydroxy ß-methylbutyrate (HMB) on enamel resistance were investigated. The examination was conducted on five sets of teeth from one-day-old spiny mice (Acomys cahirinus), one from the control and four from the experimental groups. Surface structure, molecular arrangement and crystalline organization of offspring's enamel both before and after etching were studied. Obtained results revealed that the physical and molecular arrangements of enamel were altered after the prenatal supplementation, and significantly affected its final structure and resistance against acid action. The enamel of incisors from the offspring which mothers were supplemented with HMB in a high dose (0.2â¯g/kgbw) and in the late period of gestation (26th-39th day) showed the highest endurance against acid treatment demonstrating only vestigial changes in their surface structure after acid action. Comparing to the remaining experimental groups, it was characterized by a reduced roughness and fractal dimension, significantly lower degree of demineralization and simultaneous lack of notable differences in the Raman spectra before and after acid etching. The results suggest that an increased enamel resiliency was the effect of a relatively high degree of mineralization and higher organization of the surface.
Asunto(s)
Esmalte Dental/efectos de los fármacos , Valeratos/farmacología , Ácidos/química , Animales , Animales Recién Nacidos , Esmalte Dental/embriología , Esmalte Dental/ultraestructura , Suplementos Dietéticos , Femenino , Ratones , Modelos Moleculares , Embarazo , Atención Prenatal , Propiedades de Superficie/efectos de los fármacos , Valeratos/administración & dosificaciónRESUMEN
Alterations in the structure and mechanical properties of teeth in adult Wistar rats exposed to cadmium were investigated. Analyses were conducted on two sets of incisors from female and male specimens, that were intoxicated with cadmium (n = 12) or belonged to the control (n = 12). The cadmium group was administered with CdCl2 dissolved in drinking water with a dose of 4mg/kgbw for 10 weeks. The oral intake of cadmium by adult rats led to the range of structural changes in enamel morphology and its mechanical features. A significant increase of cadmium levels in the teeth in comparison to the control, a slight shift in the colour and reduction of pigmented enamel length, higher surface irregularity, a decrease of hydroxyapatite crystals size in the c-axis and simultaneous increase in pigmented enamel hardness were observed. The extent of these changes was sex-dependent and was more pronounced in males.
Asunto(s)
Cadmio/toxicidad , Incisivo/efectos de los fármacos , Animales , Fenómenos Biomecánicos , Cadmio/administración & dosificación , Cadmio/farmacocinética , Cristalización , Esmalte Dental/efectos de los fármacos , Esmalte Dental/patología , Esmalte Dental/fisiopatología , Durapatita/química , Durapatita/metabolismo , Femenino , Dureza/efectos de los fármacos , Incisivo/patología , Incisivo/fisiopatología , Masculino , Microscopía de Fuerza Atómica , Microscopía Electrónica de Rastreo , Minerales/metabolismo , Ratas , Ratas Wistar , Difracción de Rayos XRESUMEN
This study was focused on analyzing the effects of dietary inclusion of raw chickpea seed as a replacement of soybean meal as a primary protein source on bone structure in broiler chickens. Broiler chickens (n = 160) received in their diet either soybean meal (SBM) or raw chickpea seeds (CPS) as a primary protein source throughout the whole rearing period (n = 80 in each group). On the 42th day randomly selected chickens from each group (n = 8) were slaughtered. Collected tibiotarsus were subjected to examination of the biomechanical characteristics of bone mid-diaphysis, microstructure of the growth plate and articular cartilages; the analysis of mineral content and crystallinity of mineral phase, and the measurements of thermal stability of collagen in hyaline cartilage were also carried out. The inclusion of chickpea seeds resulted in increase of bone osteometric parameters (weight, length and mid-diaphysis cross-sectional area) and mechanical endurance (yield load, ultimate load, stiffness, Young modulus). However, when loads were adjusted to bone shape (yield and ultimate stress) both groups did not differ. Mineral density determined by means of densitometric measurements did not differ between groups, however the detailed analysis revealed the differences in the macro- and microelements composition. The results of FT-IR and XRD analyses showed no effect of diet type on mineral phase crystallinity and hydroxyapatite nanocrystallites size. In trabecular bone, the increase of real bone volume (BV/TV) and number of trabeculae was observed in the CPS group. Total thickness of articular cartilage was the same in both groups, save the transitional zone, which was thicker in the SBM group. The total thickness of the growth plate cartilage was significantly increased in the CPS group. The area of the most intense presence of proteoglycans was wider in the SBM group. The structural analysis of fibrous components of bone revealed the increase of fraction of thin, immature collagen content in articular cartilage, trabeculae and compact bone in the CPS group. The dietary inclusion of CPS affected the thermal stability of collagen, as decrease of net denaturation enthalpy was observed. This study showed a beneficial effect of CPS on the skeletal development, improving the overall bone development and the microarchitecture of cancellous bone. It suggests that CPS can be a promising replacement for SBM in broilers feeding in the aspect of animal welfare related to the development of the skeletal system.
Asunto(s)
Huesos/metabolismo , Pollos/metabolismo , Cicer/química , Dieta/veterinaria , Alimentación Animal , Fenómenos Fisiológicos Nutricionales de los Animales , Animales , Peso Corporal/efectos de los fármacos , Desarrollo Óseo/efectos de los fármacos , Huesos/química , Calcificación Fisiológica/efectos de los fármacos , Pollos/crecimiento & desarrollo , Proteínas en la Dieta/administración & dosificación , Proteínas en la Dieta/metabolismo , Semillas/química , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Copper is required for normal functioning of all basic biochemical and physiological processes in the body. The objective of this study was to compare the effect of two different chemical forms (carbonate and nanoparticles) of Cu administered in feed mixtures to growing rats on bone geometric and structural parameters as well as material characteristics in a rat model. For this purpose, five experimental treatments were used to evaluate the effects of different levels of Cu applied in the diet as a mineral mixture (the standard dose of 6.5mg/kg diet, half the standard dose, and no Cu in mineral mixture as a negative control) and two Cu sources (CuCO3 - commonly used in rodent laboratory diets and a Cu-NP nanoparticle preparation, 40nm). There were no changes in body weight and bone morphology, but significant alteration was noted in the geometry and mechanical parameters, which was Cu-NP-dose dependent. Our study showed an increase in the ultimate load and toughness in Cu-NP-treated rats at the standard concentration. The higher values of the studied parameters prove that there was a change in bone mineralization. Although bone mineral density and content were not changed, bone tissue density and ash increased. The XRD analysis revealed that some peaks did not originate from hydroxyapatite, and they indicated existence of other mineral phases. No studies conducted so far have provided a detailed mechanical X-ray diffraction analysis of bone tissue of growing rats administered with diet containing Cu nanoparticles. This study showed that Cu-NP given in low dose increased mechanical endurance of bone, without the changes in strain and stress compared to low dose of Cu given in traditional form.
Asunto(s)
Huesos/anatomía & histología , Cobre/farmacología , Dieta , Nanopartículas del Metal/química , Animales , Fenómenos Biomecánicos/efectos de los fármacos , Peso Corporal , Huesos/efectos de los fármacos , Cobre/sangre , Conducta Alimentaria , Masculino , Modelos Animales , Tamaño de los Órganos , Ratas Wistar , Difracción de Rayos XRESUMEN
OBJECTIVE: The aim of this research was to check the effect of the prenatally administered ß-hydroxy ß-methylbutyrate (HMB) on the development of enamel surface of the spiny mice offspring. DESIGN: The spiny mice dams were randomly assigned into three groups: control group (not supplemented with HMB) and two experimental groups in which powdered HMB was given at the daily dosage of 0.2g/kg of body weight (group I) and 0.02g/kg of body weight (group II) during the last period of gestation. Newborn pups were euthanized by CO2 inhalation. The morphology of incisor teeth was analysed using atomic force microscopy (AFM) in semi-contact mode in the height, magnitude and phase domains. Height images became a basis for determination of surface roughness parameters. RESULTS: Conducted study indicated that maternal HMB administration markedly influences enamel development. Enamel of offspring's teeth in both experimental groups was characterized by significantly smaller values of indices describing surface roughness and profile. HMB supplementation influenced the calculated parameters regardless of the diet type and offspring sex, however higher dose of HMB caused stronger changes in enamel surface's physical properties and could be observed in higher intensity in the male group. CONCLUSIONS: HMB administration caused reduction in the irregularities of enamel surface, thereby possibly reducing the probability of bacteria adhesion and caries development. These observations may serve to improve nutrition and supplementation of animals and could be a lead for further research.