RESUMEN
Plastic pollution is one of the crucial global challenges nowadays, and biodegradation is a promising approach to manage plastic waste in an environment-friendly and cost-effective way. In this study we identified the strain of fungus Trichoderma viride GZ1, which was characterized by particularly high pectinolytic activity. Using differential scanning calorimetry, Fourier-transform infrared spectroscopy techniques, and viscosity measurements we showed that three-month incubation of polylactide and polyethylene terephthalate in the presence of the fungus lead to significant changes of the surface of polylactide. Further, to gain insight into molecular mechanisms underneath the biodegradation process, western blot hybridization was used to show that in the presence of poly(ethylene terephthalate) (PET) in laboratory conditions the fungus produced hydrophobin proteins. The mycelium adhered to the plastic surface, which was confirmed by scanning electron microscopy, possibly due to the presence of hydrophobins. Further, using atomic force microscopy we demonstrated for the first time the formation of hydrophobin film on the surface of aliphatic polylactide (PLA) and PET by T. viride GZ1. This is the first stage of research that will be continued under environmental conditions, potentially leading to a practical application.
Asunto(s)
Hypocreales/metabolismo , Plásticos/química , Poliésteres/química , Tereftalatos Polietilenos/química , Biodegradación Ambiental , Rastreo Diferencial de Calorimetría , Microscopía de Fuerza Atómica , Polímeros/química , Espectroscopía Infrarroja por Transformada de Fourier , Propiedades de Superficie , Viscosidad , Microbiología del Agua , Contaminantes Químicos del AguaRESUMEN
Accidental freezing of aluminum-based vaccines occurs during their storage and transportation, in both developed and developing countries. Freezing damages the freeze-sensitive aluminum adjuvanted vaccines, through separation of lattice between aluminum adjuvant and antigen, leading to formation of aluminum aggregates, and loss of potency. In this study, we examined Alhydrogel™ ([AlO(OH)]xnH2O, aluminum hydroxide, hydrated for adsorption) stored under recommended conditions, and exposed to freezing temperature until solid-frozen. The main purpose of our research was to determine the destruction areas of the solid-frozen Alhydrogel™ using selected methods of scanning electron microscopy, energy dispersive X-ray spectroscopy, Raman spectroscopy, Fourier-transform infrared spectroscopy and transmission electron microscopy working in diffraction mode. The Zeta potential evaluation, measurements of albumin adsorption power, thermogravimetric analysis and estimation of the mass loss after drying indicated significant structural (physical) and chemical differences between the freeze-damaged and non-frozen vaccine adjuvant. The presented results are important to better understand the type and nature of damages occurring in freeze-damaged aluminum-based vaccines. These results can be used in future studies to improve the temperature stability of aluminum adjuvanted vaccines.
Asunto(s)
Adyuvantes Inmunológicos/efectos de la radiación , Hidróxido de Aluminio/efectos de la radiación , Fenómenos Químicos/efectos de la radiación , Congelación , Adyuvantes Inmunológicos/química , Hidróxido de Aluminio/química , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Espectrometría por Rayos X , Espectroscopía Infrarroja por Transformada de Fourier , Espectrometría RamanRESUMEN
V2O5-TiO2 mixed oxide nanotube (NT) layers were successfully prepared via the one-step anodization of Ti-V alloys. The obtained samples were characterized by scanning electron microscopy (SEM), UV-Vis absorption, photoluminescence spectroscopy, energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (DRX), and micro-Raman spectroscopy. The effect of the applied voltage (30-50 V), vanadium content (5-15 wt %) in the alloy, and water content (2-10 vol %) in an ethylene glycol-based electrolyte was studied systematically to determine their influence on the morphology, and for the first-time, on the photocatalytic properties of these nanomaterials. The morphology of the samples varied from sponge-like to highly-organized nanotubular structures. The vanadium content in the alloy was found to have the highest influence on the morphology and the sample with the lowest vanadium content (5 wt %) exhibited the best auto-alignment and self-organization (length = 1 µm, diameter = 86 nm and wall thickness = 11 nm). Additionally, a probable growth mechanism of V2O5-TiO2 nanotubes (NTs) over the Ti-V alloys was presented. Toluene, in the gas phase, was effectively removed through photodegradation under visible light (LEDs, λmax = 465 nm) in the presence of the modified TiO2 nanostructures. The highest degradation value was 35% after 60 min of irradiation. V2O5 species were ascribed as the main structures responsible for the generation of photoactive e- and h⺠under Vis light and a possible excitation mechanism was proposed.
Asunto(s)
Electrodos , Nanotubos/química , Oxidación-Reducción , Procesos Fotoquímicos , Titanio/química , Compuestos de Vanadio/química , Aleaciones , Catálisis , Nanotubos/ultraestructura , Fotólisis , Análisis EspectralRESUMEN
PURPOSE: More than half of the cavity restorations are replaced due to bacterial microleakage. A need for disinfection agents arises. Application of silver nanoparticles (AgNPs) may be beneficial, yet their impact on the adhesives' shear bond strength to dentin remains unknown. METHODS: The aim was to assess the shear bond strength to dentin of different dental materials combined with AgNPs. Failure modes were also examined using SEM/FIB, SEM/EDS and endodontic microscopes. RESULTS: The results showed no impact of AgNPs addition to dental materials in terms of shear bond strength to dentin. A change of the failure mode of the self-etch bonding system, Clearfil SE Bond, combined with AgNPs was observed. The new failure modes depended upon the order of application of the materials onto dentin. CONCLUSIONS: The microscopic evaluation of the samples showed the presence of AgNPs agglomerations gathered on the dentin's surface. AgNPs connection with self-etching dentin bonding system may have a serious clinical impact.