TiO2-based mixed oxide-carbon composite supports have been suggested to provide enhanced stability for platinum (Pt) electrocatalysts in polymer electrolyte membrane (PEM) fuel cells. The addition of molybdenum (Mo) to the mixed oxide is known to increase the CO tolerance of the electrocatalyst. In this work Pt catalysts, supported on Ti1-xMoxO2-C composites with a 25/75 oxide/carbon mass ratio and prepared from different carbon materials (C: Vulcan XC-72, unmodified and functionalized Black Pearls 2000), were compared in the hydrogen oxidation reaction (HOR) and in the oxygen reduction reaction (ORR) with a commercial Pt/C reference catalyst in order to assess the influence of the support on the electrocatalytic behavior. Our aim was to perform electrochemical studies in preparation for fuel cell tests. The ORR kinetic parameters from the Koutecky-Levich plot suggested a four-electron transfer per oxygen molecule, resulting in H2O. The similarity between the Tafel slopes suggested the same reaction mechanism for electrocatalysts supported by these composites. The HOR activity of the composite-supported electrocatalysts was independent of the type of carbonaceous material. A noticeable difference in the stability of the catalysts appeared only after 5000 polarization cycles; the Black Pearl-containing sample showed the highest stability.
The strength and geometry of adsorption of substituted phenylpyruvates on silver surface was studied by means of surface enhanced Raman spectroscopy (SERS) using silver sol. 2'-nitrophenylpyruvates were used as starting materials in a newly developed heterogeneous catalytic asymmetric cascade reaction to produce substituted quinoline derivatives. Substituents on the aromatic ring of the starting materials had significant influence on the yield of the desired quinoline derivatives. Product selectivity of the transformation of nitrophenylpyruvates were enhanced by the acid added. The geometry and the strength of the adsorption are assumed to play an important role in the outcome of this reaction, so we have tried to find correlation between the structure of adsorbed phenylpyruvates and their catalytic performance. Based on the results of our spectroscopic measurements, the enol form is predominant in the series of phenylpyruvates in solid form and methanol solutions. Stronger adsorption of phenylpyruvates in acidic media through oxygen atoms was indicated by the increased enhancement in the SERS spectrum. The nitro group of 2'-nitrophenylpyruvates has no direct role in the adsorption on Ag surface. This observation has explained why the hydrogenation of the keto group (presumably via the enol form) occurs preferentially and why the formation of the undesired indole derivatives requiring reduction of the nitro group is suppressed. The SERS behavior has helped to get a closer look on the first step of adsorption of starting materials contributing to a better understanding of the cascade reaction studied, thus providing a better flexibility in catalyst design.
The influence of the semiconductor microstructure on the photocatalytic behavior of Pt-PtOx/TiO2 catalysts was studied by comparing the methanol-reforming performance of systems based on commercial P25 or TiO2 from sol-gel synthesis calcined at different temperatures. The Pt co-catalyst was deposited by incipient wetness and formed either by calcination or high-temperature H2 treatment. Structural features of the photocatalysts were established by X-ray powder diffraction (XRD), electron spin resonance (ESR), X-ray photoelectron spectroscopy (XPS), optical absorption, Raman spectroscopy and TEM measurements. In situ reduction of Pt during the photocatalytic reaction was generally observed. The P25-based samples showed the best H2 production, while the activity of all sol-gel-based samples was similar in spite of the varying microstructures resulting from the different preparation conditions. Accordingly, the sol-gel-based TiO2 has a fundamental structural feature interfering with its photocatalytic performance, which could not be improved by annealing in the 400-500 °C range even by scarifying specific surface area at higher temperatures.
In this study, relationships between preparation conditions, structure, and activity of Pt-containing TiO2 photocatalysts in photoinduced reforming of glycerol for H2 production were explored. Commercial Aerolyst® TiO2 (P25) and homemade TiO2 prepared by precipitation-aging method were used as semiconductors. Pt co-catalysts were prepared by incipient wetness impregnation from aqueous solution of Pt(NH3)4(NO3)2 and activated by calcination, high temperature hydrogen, or nitrogen treatments. The chemico-physical and structural properties were evaluated by XRD, ¹H MAS NMR, ESR, XPS, TG-MS and TEM. The highest H2 evolution rate was observed over P25 based samples and the H2 treatment resulted in more active samples than the other co-catalyst formation methods. In all calcined samples, reduction of Pt occurred during the photocatalytic reaction. Platinum was more easily reducible in all of the P25 supported samples compared to those obtained from the more water-retentive homemade TiO2. This result was related to the negative effect of the adsorbed water content of the homemade TiO2 on Pt reduction and on particle growth during co-catalyst formation.
The UV-Visible and Surface Enhanced Raman Spectroscopy (SERS) behavior of silver sol (a typical SERS agent) were studied in the presence of different bifunctional thiols such as p-aminothiophenol, p-mercaptobenzoic acid, p-nitrothiophenol, p-aminothiophenol hydrochloride, and 2-mercaptoethylamine hydrochloride in diluted aqueous solution. Our results confirm that the p-aminothiophenol induced aggregation of citrate stabilized silver colloid originates from its electrostatic nature, as well as the azo-bridge formation cannot be the reason of the observed time dependent UV-Visible spectra. Based on our parallel SERS and electrospray ionization mass spectrometry measurements, we have concluded that certain amount of oxidized form of the probe molecule has to be present for the so-called b2-mode enhancement in the SERS spectrum of p-aminothiophenol. Our findings seem to support the idea that the azo-bridge formation is responsible for the b2-mode enhancement in the SERS spectrum of p-aminothiophenol.
Aniline Compounds/chemistry , Silver/chemistry , Sulfhydryl Compounds/chemistry , Molecular Structure , Spectrophotometry, Ultraviolet , Spectrum Analysis, Raman , Surface Properties
The enantioselective hydrogenation of methyl or ethyl pyruvate over cinchona-platinum catalyst system (Orito's reaction) is one of the most intensively studied heterogeneous catalytic asymmetric hydrogenation reactions. Studies aiming at systematic changes of the chiral template have played a crucial role in creating hypotheses for the mechanism of Orito's reaction. It is very important to clarify which structural unit of the alkaloid takes part in the enantiodifferentiation, and learn about the role of the different structural units of chiral templates. In this article, we made an attempt to describe the behavior of natural alkaloids, their synthetic derivatives, and analogues as chiral templates in the heterogeneous catalytic asymmetric hydrogenation of activated ketones.
Alkaloids/chemistry , Catalysis , Stereoisomerism
