Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Más filtros











Base de datos
Intervalo de año de publicación
1.
Nihon Hoshasen Gijutsu Gakkai Zasshi ; 80(5): 519-529, 2024 May 20.
Artículo en Japonés | MEDLINE | ID: mdl-38569842

RESUMEN

The goal of our study was to clarify the effect of low pulse rate fluoroscopy applying in percutaneous coronary intervention (PCI) on devices' visibility and radiation dose. Four types of fluoroscopy conditions combined with two pulse rates (7.5 and 15 pulses/s) and two types of adaptive temporal filters (ATFs) (weak and strong) were used. Samples for visibility evaluation were acquired with moving phantom and devices such as stent, balloon, and guidewire. Trailing artifacts and the visibility of stent were evaluated by Scheffe's method of paired comparisons. Incident air kerma (Ka,r) and kerma area product (PKA) in the clinic were obtained under two fluoroscopic pulse rate conditions (7.5 and 15 pulses/s). As a result, in 7.5 pulses/s fluoroscopy, trailing artifacts were decreased by using weak ATF with the median value of PKA and Ka,r reduced by about 50%, but stent visibility was decreased compared to 15 pulses/s. Therefore, a combination of 7.5 pulses/s fluoroscopy and suitable ATF can bring dose reduction with avoiding trailing artifacts, but dose per pulse should be adjusted to maintain the stent visibility.


Asunto(s)
Intervención Coronaria Percutánea , Dosis de Radiación , Fluoroscopía , Humanos , Fantasmas de Imagen , Stents , Artefactos
2.
Nihon Hoshasen Gijutsu Gakkai Zasshi ; 61(3): 409-18, 2005 Mar 20.
Artículo en Japonés | MEDLINE | ID: mdl-15815560

RESUMEN

One of the newest CT application technologies is cardiac synchronized image reconstruction. In this technology, evaluation of time-resolution is very important. We developed a method of measuring time-resolution in cardiac synchronized reconstruction, and evaluated various scanning protocols. In our experiment, ECG-gated scanning was done by multi-slice CT (Aquilion16 Super Heart Edition, Toshiba Medical Systems Co., Ltd., Japan). The nominal slice thickness was 0.5 mm, and rotation time was 0.5 sec. Input heart rate was set at 40, 45, 50, 55, 60, 70, 75, 80, and 90 bpm, and helical pitch at 3.2, 4.0, and 4.8 (beam-pitch: 0.200, 0.250 and 0.300). We measured FWTM of the obtained sensitivity distribution and compared at each scanning protocol. Time resolution improved as helical pitch decreased and heart rate increased. However, phase-time resolution deteriorated as heart rate increased. The results of our experiment indicated that a segment center was determined by X-ray tube rotation time and heart rate, and the number of segments was determined by heart rate, helical pitch, and reconstruction position. Time resolution changed with X-ray tube rotation time, heart rate, helical pitch, and reconstruction position. In this report, we provide a reference for an optimal scanning protocol in cardiac synchronized image reconstruction.


Asunto(s)
Corazón/diagnóstico por imagen , Procesamiento de Imagen Asistido por Computador/métodos , Tomografía Computarizada Espiral/métodos , Electrocardiografía , Frecuencia Cardíaca , Fantasmas de Imagen , Sensibilidad y Especificidad , Tiempo
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA