In Situ Reconstruction of Active Heterointerface for Hydrocarbon Combustion through Thermal Aging over Strontium-Modified Co3O4 Nanocatalyst with Good Sintering Resistance.

The issue of catalyst deactivation due to sintering has gained significant attention alongside the rapid advancement of thermal catalysts. In this work, a simple Sr modification strategy was applied to achieve highly active Co3O4-based nanocatalyst for catalytic combustion of hydrocarbons with excellent antisintering feature. With the Co1Sr0.3 catalyst achieving a 90% propane conversion temperature (T90) of only 289 °C at a w8 hly space velocity of 60,000 mL·g-1·h-1, 24 °C lower than that of pure Co3O4. Moreover, the sintering resistance of Co3O4 catalysts was greatly improved by SrCO3 modification, and the T90 over Co1Sr0.3 just increased from 289 to 337 °C after thermal aging at 750 °C for 100 h, while that over pure Co3O4 catalysts increased from 313 to 412 °C. Through strontium modification, a certain amount of SrCO3 was introduced on the Co3O4 catalyst, which can serve as a physical barrier during the thermal aging process and further formation of Sr-Co perovskite nanocrystals, thus preventing the aggregation growth of Co3O4 nanocrystals and generating new active SrCoO2.52-Co3O4 heterointerface. In addition, propane durability tests of the Co1Sr0.3 catalysts showed strong water vapor resistance and stability, as well as excellent low-temperature activity and resistance to sintering in the oxidation reactions of other typical hydrocarbons such as toluene and propylene. This study provides a general strategy for achieving thermal catalysts by perfectly combining both highly low-temperature activity and sintering resistance, which will have great significance in practical applications for replacing precious materials with comparative features.

Hybrid conditioning of ionic liquid coupling with H2SO4 to improve the dewatering performance of municipal sludge.

Municipal sludge generated from wastewater treatment plants can cause a serious environmental and economic burden. A novel hybrid conditioning strategy was developed to enhance the dewatering performance of sludge, employing 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([C4mim][CF3SO3]) treatment combined with H2SO4 acidification. Following conditioning, the capillary suction time ( CST normalized ), the specific resistance of filtration (SRF), and moisture content of the treated sludge were decreased to 1.99 ± 0.24 (s·L/g TSS), 1.33 ± 0.05 (1012 m/kg), and 72.01 ± 0.94%, respectively. The results were superior to those achieved with sludge treated solely by H2SO4 acidification or [C4mim][CF3SO3] alone. The biomacromolecules within the sludge flocs were dissolved by [C4mim][CF3SO3], while simultaneously, the microorganisms were inactivated. Consequently, the colloidal-like structures of the sludge flocs were destroyed. Additionally, the ionizable functional groups of the biomacromolecules were instantly protonated by the introduced H+ ions, and their negative charges were neutralized during the H2SO4 acidification process. The presence of H+ ions promoted the weakening of electrostatic repulsion between the sludge flocs. As a result, an enhancement of sludge dewaterability was obtained after treatment with [C4mim][CF3SO3] and H2SO4 acidification. The finding of the intensification mechanism of sludge dewaterability brought by hybrid treatment of acidification and [C4mim][CF3SO3] provides novel insights into the field of sludge disposal.

A novel insight on the intensification mechanism of sludge dewaterability by ionic liquids.

The huge output of sewage sludge has caused a remarkable environmental burden. Sludge dewatering is considered as an important way to reduce the sludge volume. Five imidazole-based ionic liquids were used to improve the dewaterability of sewage sludge. 1-ethyl-3-methylimidazolium dihydrogen phosphate ([Emim][H2PO4]) was screened out as a potential conditioner of sludge due to its excellent dewatering performance and reusability. The solid content of sludge filter cake after treatment with [Emim][H2PO4] was about 10% higher than that of sludge treated by cationic polyacrylamides (CPAM). The intensification mechanism of ionic liquids to the improvement of sludge dewatering performance was studied. The presence of acidic ionic liquids [Emim][H2PO4] resulted the increase of zeta potential from -14.57 ± 0.81 mV to -5.60 ± 0.30 mV and led to the protonation of biopolymers. Acidic ionic liquids [Emim][H2PO4] inactivated the microorganism and led to a porous and unconsolidated structure of the solid sludge particles. All these effects were conducive to destroy the microstructure of sludge and release water. However, [Emim]Cl, [Bmim][OTf] and [Hmim][OTf] showed little effect on the protonation of ionizable functional groups at near-neutral environment. The dissolution of biopolymer decreased the zeta potential and strengthened the electrostatic repulsion. So, they showed weaker intensification effects than CPAM.

Low-Temperature Oxidation of Toluene over MnOx-CeO2 Nanorod Composites with High Sinter Resistance: Dual Effect of Synergistic Interaction on Hydrocarbon Adsorption and Oxygen Activation.

Synergistic interaction derived by a heterointerface structure on the surface of metal oxide catalysts has a crucial role in improving the catalytic activity. In this work, MnOx nanoparticles were dispersed on the surface of CeO2 nanorods to generate a MnOx-CeO2 heterointerface structure, and its effect on toluene adsorption and catalytic oxidation performance was investigated. The results show that MnOx is well dispersed on CeO2 nanorods, and the interaction of Mn-Ce significantly reduces the strength of the Ce-O bond and increases the conversion of Ce4+ to Ce3+, which further promotes the activation of oxygen. Compared to MnOx on SiO2 without synergistic interaction, the enhancement of toluene adsorption on this novel MnOx-CeO2 hetero-interface structure can also make a great contribution to the improvement of the catalytic reaction process. Among them, the synergistic effect of CeO2-MnOx could reduce the temperature of 90% toluene conversion to 210 °C (this value is 83 °C lower than that over pure CeO2 nanorods). In addition, the fresh MnOx-CeO2 catalyst not only shows excellent stability and moisture resistance but also retains highly low-temperature activity even after thermal aging at 750 °C for 100 h.

Destroying the structure of extracellular polymeric substance to improve the dewatering performance of waste activated sludge by ionic liquid.

The disposal and resource utilization of waste activated sludge (WAS) is a big challenge for its high moisture content. Ionic liquid (IL), 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIM][OTf]), was innovatively used as a conditioner to improve the dewatering performance of WAS. The WAS was characterized by flocs size, three-dimensional excitation-emission matrix (3D-EEM), zeta potential, Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM) for the investigation of intensification mechanism. The results showed that the dewatering performance of WAS conditioned by [EMIM][OTf] was significantly improved. The moisture content was successfully decreased to 64.99±0.92 %, and the intensification mechanism was investigated. The results showed that the structures of extracellular polymeric substance (EPS) were destroyed by [EMIM][OTf]. It brought a sharp decrease of the contents of polysaccharides (PS), proteins (PN), humic acid (HA) and fulvic acid (FA) in tightly bound extracellular polymeric substance (TB-EPS) structure. The inactivation of microbial cells promoted the disintegration of flocs. Large flocs were converted into unstable small particles and biopolymers. In addition, the negative charges of WAS were also neutralized for dissolution of biopolymers in [EMIM][OTf], and the electrostatic repulsion between flocs was weakened. [EMIM][OTf] was easily recycled five times. The research results indicate that specific IL, such as [EMIM][OTf], is a potential conditioner to improve the dewatering performance of WAS.

Successive grafting of poly(hydroxyethyl methacrylate) brushes and melamine onto chitosan microspheres for effective Cu(II) uptake.

Cross-linked chitosan (CCS) microspheres tethered with melamine-conjugated poly(hydroxyethyl methacrylate) (PHEMA) brushes were synthesized by combination of surface-initiated atom transfer radical polymerization (ATRP) of HEMA and subsequent covalent immobilization of melamine onto the chain ends of PHEMA brushes. The as-synthesized CCS microsphere was used as a novel adsorbent for effective uptake of Cu(II) ions from aqueous solution. Success in each functionalization step was ascertained by SEM, ATR-FTIR and XPS characterization. Batch adsorption experimental results demonstrated that the adsorption equilibrium of Cu(II) ions on the melamine-grafted CCS microsphere was rapidly established within 20 min, and the adsorption process was found to be governed by intra-particle diffusion and chemisorption processes. The Langmuir-fitted maximum adsorption capacity of Cu(II) ions on the as-synthesized CCS microspheres was as high as circa 4.67 mmol L-1 (299 mg g-1). The calculated thermodynamic parameters revealed an endothermic and spontaneous adsorption process of Cu(II) ions on the melamine-grafted CCS microspheres. XPS spectra revealed that the adsorption mechanism was attributed to coordination (or chelation) interactions between amino (or hydroxyl) groups with cationic Cu(II) ions.

Early exposure of rotating magnetic fields promotes central nervous regeneration in planarian Girardia sinensis.

Magnetic field exposure is an accepted safe and effective modality for nerve injury. However, it is clinically used only as a supplement or salvage therapy at the later stage of treatment. Here, we used a planarian Girardia sinensis decapitated model to investigate beneficial effects of early rotary non-uniform magnetic fields (RMFs) exposure on central nervous regeneration. Our results clearly indicated that magnetic stimulation induced from early RMFs exposure significantly promoted neural regeneration of planarians. This stimulating effect is frequency and intensity dependent. Optimum effects were obtained when decapitated planarians were cultured at 20 °C, starved for 3 days before head-cutting, and treated with 6 Hz 0.02 T RMFs. At early regeneration stage, RMFs exposure eliminated edema around the wound and facilitated subsequent formation of blastema. It also accelerated cell proliferation and recovery of neuron functionality. Early RMFs exposure up-regulated expression of neural regeneration related proteins, EGR4 and Netrin 2, and mature nerve cell marker proteins, NSE and NPY. These results suggest that RMFs therapy produced early and significant benefit in central nervous regeneration, and should be clinically used at the early stage of neural regeneration, with appropriate optimal frequency and intensity.

A comparison of laser ultrasound measurements and finite-element simulations for the dispersion behavior of antisymmetric flexural modes propagating along wedge tips with coatings.

Antisymmetric flexural (ASF) modes are antisymmetric types of guided waves propagating along the tip of wedge-shaped waveguides. Acoustic sensors frequently rely on the detection of small mass changes that result from binding a coated layer coupled to the active sensor surface. While a layer is coated on one of the wedge's surfaces, another type of sensor can be potentially developed based on detecting the change of ASF velocity. This paper describes a study on the effects of ASF dispersion behavior for a wedge with a layer of coating using a combined numerical and experimental investigation. In this study, the frequency range is from 0.5 MHz to 10 MHz, and the effective wave propagation length along the wedge tip ranges from 3 mm to 13 mm. Brass wedge tips coated with aluminum layer are studied for the case of slow matrix with fast coating, while aluminum wedge tips with copper coatings are studied for the case of fast matrix/slow coating combination. Like surface acoustic waves propagating along a flat surface with a layer of coating, loaded and stiffened phenomena are observed for the ASF modes traveling along coated wedges. Moreover, the wedge tip geometry is found to have an effect in enhancing the loaded and stiffened phenomena. The numerical results show good agreement with experimental results.