RESUMEN
Laser-assisted controlled dielectric breakdown (LaCBD) has emerged as an alternative to conventional CBD-based nanopore fabrication due to its localization capability, facilitated by the photothermal-induced thinning down in the hot spot. Here, we reported the potential impact of the laser on forming debris around the nanopore region in LaCBD. The debris was clearly observable by scanning electron microscopy (SEM) and photoluminescence (PL) spectroscopy. We found that debris formation is a unique phenomenon in LaCBD that is not observable in the conventional CBD approach. We also found that the LaCBD-induced debris is more evident when the laser power and voltage stress are higher. Moreover, the debris is asymmetrically distributed on the top and bottom sides of the membrane. We also found unexpected rectified ionic and molecular transport in those LaCBD nanopores with debris. Based on these observations, we developed and validated a model describing the debris formation kinetics in LaCBD by considering the generation, diffusion, drift, and gravity in viscous mediums. These findings indicate that while laser aids in nanopore localization, precautions should be taken due to the potential formation of debris and rectification of molecular transport. This study provides valuable insights into the kinetics of LaCBD and the characteristics of the LaCBD nanopore.
RESUMEN
How the carbohydrate binding protein galectin-3 might act as a diabetogenic and tumorogenic factor remains to be investigated. Here we report that intracellular galectin-3 interacts with Rag GTPases and Ragulator on lysosomes. We show that galectin-3 senses lipopolysaccharide (LPS) to facilitate the interaction of Rag GTPases and Ragulator, leading to the activation of mTORC1. We find that the lipopolysaccharide/galectin-3-Rag GTPases/Ragulator-mTORC1 axis regulates a cohort of genes including GLUT1, and HK2, and PKM2 that are critically involved in glucose uptake and glycolysis. Indeed, galectin-3 deficiency severely compromises LPS-promoted glycolysis. Importantly, the expression of HK2 is significantly reduced in diabetes patients. In multiple types of cancer including hepatocellular carcinoma (HCC), galectin-3 is highly expressed, and its level of expression is positively correlated with that of HK2 and PKM2 and negatively correlated with the prognosis of HCC patients. Our study unravels that galectin-3 is a sensor of LPS, an important modulator of the mTORC1 signaling, and a critical regulator of glucose metabolism.
Asunto(s)
Carcinoma Hepatocelular , Neoplasias Hepáticas , Humanos , Galectina 3/genética , Diana Mecanicista del Complejo 1 de la Rapamicina/genética , Lipopolisacáridos , Carcinoma Hepatocelular/genética , Neoplasias Hepáticas/genéticaRESUMEN
Regular, accurate, rapid, and inexpensive self-testing for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is urgently needed to quell pandemic propagation. The existing at-home nucleic acid testing (NAT) test has high sensitivity and specificity, but it requires users to mail the sample to the central lab, which often takes 3-5 days to obtain the results. On the other hand, rapid antigen tests for the SARS-CoV-2 antigen provide a fast sample to answer the test (15 min). However, the sensitivity of antigen tests is 30 to 40% lower than nucleic acid testing, which could miss a significant portion of infected patients. Here, we developed a fully integrated SARS-CoV-2 reverse transcription loop-mediated isothermal amplification (RT-LAMP) device using a self-collected saliva sample. This platform can automatically handle the complexity and can perform the functions, including (1) virus particles' thermal lysis preparation, (2) sample dispensing, (3) target sequence RT-LAMP amplification, (4) real-time detection, and (5) result report and communication. With a turnaround time of less than 45 min, our device achieved the limit of detection (LoD) of 5 copies/µL of the saliva sample, which is comparable with the LoD (6 copies/µL) using FDA-approved quantitative real-time polymerase chain reaction (qRT-PCR) assays with the same heat-lysis saliva sample preparation method. With clinical samples, our platform showed a good agreement with the results from the gold-standard RT-PCR method. These results show that our platform can perform self-administrated SARS-CoV-2 nucleic acid testing by laypersons with noninvasive saliva samples. We believe that our self-testing platform will have an ongoing benefit for COVID-19 control and fighting future pandemics.
Asunto(s)
COVID-19 , Ácidos Nucleicos , COVID-19/diagnóstico , Computadoras de Mano , Humanos , Técnicas de Diagnóstico Molecular , Técnicas de Amplificación de Ácido Nucleico , SARS-CoV-2/genética , Saliva , Autoevaluación , Sensibilidad y EspecificidadRESUMEN
HIV self-testing is an emerging innovative approach that allows individuals who want to know their HIV status to collect their own specimen, perform a test, and interpret the results privately. Existing HIV self-testing methods rely on rapid diagnostic tests (RDTs) to detect the presence of HIV-1/2 antibodies, which could miss a significant portion of asymptomatic carriers during the window period. In this work, we present a fully integrated nucleic acid testing (NAT) device towards streamlined HIV self-testing using 100 µL finger-prick whole blood. The device consists of a ready-to-use microfluidic reagent cartridge and an ultra-compact NAT-on-USB analyzer. The test requires simple steps from the user to drop the finger-prick blood sample into a collection tube with lysis buffer and load the lysate onto the microfluidic cartridge, and the testing result can be easily read out by a custom-built graphical user interface (GUI). The microfluidic cartridge and the analyzer automatically handle the complexity of sample preparation, purification, and real-time reverse-transcription loop-mediated isothermal amplification (RT-LAMP). With a turnaround time of â¼60 min, we achieved a limit of detection (LoD) of 214 viral RNA copies/mL of whole blood at a 95% confidence level. Due to its ease of use and high sensitivity, we anticipate the HIV NAT-on-USB device would be particularly useful for the high-risk populations seeking private self-testing at the early stages of exposure.
Asunto(s)
Técnicas Biosensibles , Infecciones por VIH , Infecciones por VIH/diagnóstico , Humanos , Límite de Detección , Técnicas de Amplificación de Ácido Nucleico/métodos , ARN Viral/genética , Autoevaluación , Sensibilidad y EspecificidadRESUMEN
Mild traumatic brain injury (mTBI) could be underdiagnosed and underreported due to the delayed onset of symptoms and the conventional subjective assessment. Recent studies have suggested that salivary microRNAs (miRNAs) could be reliable biomarkers for objective mTBI diagnosis. In this work, we demonstrated a rolling circle amplification (RCA)-coupled resistive pulse-counting platform for profiling mTBI-related miRNAs, using easy-to-fabricate large glass nanopores (200 nm diameter). The method relies on the linear and specific elongation of the miRNA to a much larger RCA product, which the large glass nanopore can digitally count with a high signal-to-noise ratio. We developed and validated the RCA assay against let-7a, miR-30e, and miR-21. We demonstrated the quantification capability of this large glass nanopore counting platform for purified miRNAs as well as miRNAs in salivary total RNA background. Finally, we quantitatively evaluated the performance of profiling each individual miRNAs in a mixed analyte. Our results showed that the RCA-coupled large glass nanopore counting provides a promising and accessible alternative toward the clinical diagnosis of mTBI using salivary miRNAs.
Asunto(s)
Conmoción Encefálica , MicroARNs , Nanoporos , Vidrio , Humanos , MicroARNs/genética , Técnicas de Amplificación de Ácido Nucleico/métodosRESUMEN
The current pandemic of COVID-19 caused by SARS-CoV-2 (severe acute respiratory syndrome coronavirus-2) has raised significant public health concerns. Rapid and accurate testing of SARS-CoV-2 is urgently needed for early detection and control of the disease spread. Here, we present an RT-LAMP coupled glass nanopore digital counting method for rapid detection of SARS-CoV-2. We validated and compared two one-pot RT-LAMP assays targeting nucleocapsid (N) and envelop (E) genes. The nucleocapsid assay was adopted due to its quick time to positive and better copy number sensitivity. For qualitative positive/negative classification of a testing sample, we used the glass nanopore to digitally count the RT-LAMP amplicons and benchmarked the event rate with a threshold. Due to its intrinsic single molecule sensitivity, nanopore sensors could capture the amplification dynamics more rapidly (quick time to positive). We validated our RT-LAMP coupled glass nanopore digital counting method for SARS-CoV-2 detection by using both spiked saliva samples and COVID-19 clinical nasopharyngeal swab samples. The results obtained showed excellent agreement with the gold standard RT-PCR assay. With its integration capability, the electronic nanopore digital counting platform has significant potential to provide a rapid, sensitive, and specific point-of-care assay for SARS-CoV-2.
Asunto(s)
Técnicas Biosensibles , COVID-19 , Nanoporos , Humanos , Técnicas de Diagnóstico Molecular , Técnicas de Amplificación de Ácido Nucleico , ARN Viral , SARS-CoV-2 , Sensibilidad y EspecificidadRESUMEN
Collaborative problem-solving (CPS) engages students in solving ill-structured problems, creating group knowledge, and developing self-regulation and collaboration skills. Different scaffoldings, such as minimal-guided, task-oriented, and idea-oriented, can be used to facilitate students' CPS activities, but their effects have not been comprehensively explored. In this research, we use minimally-guided, task-oriented, and idea-oriented scaffoldings to promote Chinese university students' online CPS activities and use a multi-method approach to analyze the effects of three scaffolding on collaboration. The results indicate relatively complicated collaborative processes and outcomes supported by three scaffoldings. It is initially shown that the idea-centered scaffolding strengthens students' connections between idea contribution, metacognitive regulation, and knowledge artifact behaviors, which are critical factors for improving the CPS quality. Based on the empirical research results, we conclude that future instructional design should carefully consider the educational culture, time constraint, and student regulation to better facilitate CPS practices.
RESUMEN
The outbreak of the SARS-CoV-2 caused the disease COVID-19 to spread globally. Specific and sensitive detection of SARS-CoV-2 facilitates early intervention and prevents the disease from spreading. Here, we present a solid-state CRISPR-Cas12a-assisted nanopore (SCAN) sensing strategy for the specific detection of SARS-CoV-2. We introduced a nanopore-sized counting method to measure the cleavage ratio of reporters, which is used as a criterion for positive/negative classification. A kinetic cleavage model was developed and validated to predict the reporter size distributions. The model revealed the trade-offs between sensitivity, turnaround time, and false-positive rate of the SARS-CoV-2 SCAN. With preamplification and a 30 min CRISPR Cas12a assay, we achieved excellent specificity against other common human coronaviruses and a limit of detection of 13.5 copies/µL (22.5 aM) of viral RNA at a confidence level of 95%. These results suggested that the SCAN could provide a rapid, sensitive, and specific analysis of SARS-CoV-2.
Asunto(s)
COVID-19 , Nanoporos , Sistemas CRISPR-Cas/genética , Humanos , Técnicas de Amplificación de Ácido Nucleico , SARS-CoV-2 , Sensibilidad y EspecificidadRESUMEN
The controlled dielectric breakdown emerged as a promising alternative toward accessible solid-state nanopore fabrication. Several prior studies have shown that laser-assisted dielectric breakdown could help control the nanopore position and reduce the possibility of forming multiple pores. Here, we developed a physical model to estimate the probability of forming a single nanopore under different combinations of the laser power and the electric field. This model relies on the material- and experiment-specific parameters: the Weibull statistical parameters and the laser-induced photothermal etching rate. Both the model and our experimental data suggest that a combination of a high laser power and a low electric field is statistically favorable for forming a single nanopore at a programmed location. While this model relies on experiment-specific parameters, we anticipate it could provide the experimental insights for nanopore fabrication by the laser-assisted dielectric breakdown method, enabling broader access to solid-state nanopores and their sensing applications.
RESUMEN
The current pandemic of the 2019 novel coronavirus (COVID-19) caused by SARS-CoV-2 (severe acute respiratory syndrome coronavirus-2) has raised significant public health concern. Rapid, affordable, and accurate diagnostics of SARS-CoV-2 is essential for early treatment and control of the disease spread. In the past few years, CRISPR technology has shown great potential for highly sensitive and specific molecular diagnostics. Amid the ongoing COVID-19 pandemic, there is an increasing interest in implementing CRISPR-based diagnostic principles to develop fast and precise methods for detecting SARS-CoV-2. In this work, we reviewed and summarized these CRISPR-based diagnostic systems as well as their characteristics and challenges. We also provided future perspectives of CRISPR-based sensing towards point-of-care molecular diagnosis applications.
Asunto(s)
Prueba de Ácido Nucleico para COVID-19/métodos , COVID-19/diagnóstico , Sistemas CRISPR-Cas , Proteínas Bacterianas/genética , Técnicas Biosensibles/métodos , Técnicas Biosensibles/tendencias , COVID-19/virología , Prueba de Ácido Nucleico para COVID-19/tendencias , Proteínas Asociadas a CRISPR/genética , Sistemas CRISPR-Cas/genética , Endodesoxirribonucleasas/genética , Humanos , Técnicas de Diagnóstico Molecular/métodos , Técnicas de Diagnóstico Molecular/tendencias , Pandemias , Pruebas en el Punto de Atención/tendencias , ARN Viral/genética , ARN Viral/aislamiento & purificación , SARS-CoV-2/genética , SARS-CoV-2/aislamiento & purificación , Flujo de TrabajoRESUMEN
Focused electron and laser beams have shown the ability to form nanoscale pores in SiN x membranes. During the fabrication process, areas beyond the final nanopore location will inevitably be exposed to the electron beams or the laser beams due to the need for localization, alignment and focus. It remains unclear how these unintended exposures affect the integrity of the membrane. In this work, we demonstrate the use of confocal scanning photoluminescence (PL) for mapping the microscopic changes in SiN x nanopores when exposed to electron and laser beams. We developed and validated a model for the quantitative interpretation of the scanned PL result. The model shows that the scanning PL result is insensitive to the nanopore size. Instead, it is dominated by the product of two microscopic material factors: quantum yield profile (i.e. variations in electronic structure) and thickness profile (i.e. thinning of the membrane). We experimentally demonstrated that the electron and laser beams could alter the material electronic structures (i.e. quantum yield) even when no thinning of the membrane occurs. Our results suggest that minimizing the unintended e-beam or laser beam to the SiN x during the fabrication is crucial if one desires the microscopic integrity of the membrane.
RESUMEN
While the solid-state nanopore sensors have shown exceptional promise with their single-molecule sensitivity and label-free operations, one of the most significant challenges in the nanopore sensor is the limited analyte translocation event rate that leads to prolonged sensor response time. This issue is more pronounced when the analyte concentration is below the nanomolar (nM) range, owing to the diffusion-limited mass transport. In this work, we systematically studied the experimental factors beyond the intrinsic analyte concentration and electrophoretic mobility that affect the event rate in glass nanopore sensors. We developed a quantitative model to capture the impact of nanopore surface charge density, ionic strength, nanopore geometry, and translocation direction on the event rate. The synergistic effects of these factors on the event rates were investigated with the aim to find the optimized experimental conditions for operating the glass nanopore sensor from the response time standpoint. The findings in the study would provide useful and practical insight to enhance the device response time and achieve a lower detection limit for various glass nanopore-sensing experiments.
Asunto(s)
ADN/análisis , Nanoporos , Nanotecnología , Difusión , Vidrio/química , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
Solid-state nanopores have shown great promise and achieved tremendous success in label-free single-molecule analysis. However, there are three common challenges in solid-state nanopore sensors, including the nanopore size variations from batch to batch that makes the interpretation of the sensing results difficult, the incorporation of sensor specificity, and the impractical analysis time at low analyte concentration due to diffusion-limited mass transport. Here, we demonstrate a novel loop-mediated isothermal amplification (LAMP)-coupled glass nanopore counting strategy that could effectively address these challenges. By using the glass nanopore in the counting mode (versus the sizing mode), the device fabrication challenge is considerably eased since it allows a certain degree of pore size variations and no surface functionalization is needed. The specific molecule replication effectively breaks the diffusion-limited mass transport thanks to the exponential growth of the target molecules. We show the LAMP-coupled glass nanopore counting has the potential to be used in a qualitative test as well as in a quantitative nucleic acid test. This approach lends itself to most amplification strategies as long as the target template is specifically replicated in numbers. The highly sensitive and specific sensing strategy would open a new avenue for solid-state nanopore sensors toward a new form of compact, rapid, low-cost nucleic acid testing at the point of care.
Asunto(s)
Vidrio/química , Nanoporos , Técnicas de Amplificación de Ácido Nucleico/métodos , Ácidos Nucleicos/análisis , ADN Protozoario/análisis , Humanos , Límite de Detección , Malaria Falciparum/parasitología , Nanoporos/ultraestructura , Nanotecnología/métodos , Plasmodium falciparum/aislamiento & purificaciónRESUMEN
Nanopore sensor conceptually represents an ideal single molecule counting device due to its unique partitioning-free, label-free electronic sensing. Existing theories and experiments have shown that sample concentration is proportional to the molecule translocation rate. However, a detailed nanopore geometry and size characterization or a calibration curve of concentration standards are often required for quantifying the unknown sample. In this work, we proposed and validated a calibration-free nanopore single molecule digital counting method for isolated molecule quantification. With the background ions as the in situ references, the molecule translocation rates can be normalized to the ion translocation rates (i.e., baseline current). This in situ reference alleviates the requirement for knowing the nanopore geometry and size or generating a calibration curve. In recognition of this effect, we developed a quantitative model for nanopore quantification without the need for prior knowledge of experimental conditions such as nanopore geometry, size, and applied voltage. This model was experimentally validated for different nanopores and DNA molecules with different sizes. We anticipate this calibration-free digital counting approach would provide a new avenue for nanopore-based molecule sensing.
RESUMEN
We investigate the current transport characteristics in the electrolyte-dielectric-electrolyte structure commonly used in the in situ controlled breakdown (CBD) fabrication of solid-state nanopores. It is found that the stochastic breakdown process could lead to fidelity issues of false positives (an incorrect indication of a true nanopore formation) and false negatives (inability to detect initial nanopore formation). Robust and deterministic detection of initial physical breakdown to alleviate false positives and false negatives is critical for precise nanopore size control. To this end, we report a high fidelity moving Z-score method based CBD fabrication of solid-state nanopore. We demonstrate 100% success rate of realizing the initial nanopore conductance of 3 ± 1 nS (corresponds to size of 1.7 ± 0.6 nm) regardless of the dielectric membrane characteristics. Our study also elucidates the Joule heating is the dominant mechanism for electric field-based nanopore enlargement. Single DNA molecule sensing using nanopores fabricated by this method was successfully demonstrated. We anticipate the moving Z-score based CBD method could enable broader access to the solid state nanopore-based single molecule analysis.
RESUMEN
In designing bioassay systems for low-abundance biomolecule detection, most research focuses on improving transduction mechanisms while ignoring the intrinsically fundamental limitations in solution: mass transfer and binding affinity. We demonstrate enhanced biomolecular surface binding using an acoustic nano-electromechanical system (NEMS) resonator, as an on-chip biomolecular concentrator which breaks both mass transfer and binding affinity limitations. As a result, a concentration factor of 105 has been obtained for various biomolecules. The resultantly enhanced surface binding between probes on the absorption surface and analytes in solution enables us to lower the limit of detection for representative proteins. We also integrated the biomolecular concentrator into an optoelectronic bioassay platform to demonstrate delivery of proteins from buffer/serum to the absorption surface. Since the manufacture of the resonator is CMOS-compatible, we expect it to be readily applied to further analysis of biomolecular interactions in molecular diagnostics.
RESUMEN
Efficient delivery of genes and therapeutic agents to the interior of the cell is critical for modern biotechnology. Herein, a new type of chemical-free cell poration method-hypersonic poration-is developed to improve the cellular uptake, especially the nucleus uptake. The hypersound (≈GHz) is generated by a designed piezoelectric nano-electromechanical resonator, which directly induces normal/shear stress and "molecular bombardment" effects on the bilayer membranes, and creates reversible temporal nanopores improving the membrane permeability. Both theory analysis and cellular uptake experiments of exogenous compounds prove the high delivery efficiency of hypersonic poration. Since target molecules in cells are accumulated with the treatment, the delivered amount can be controlled by tuning the treatment time. Furthermore, owing to the intrinsic miniature of the resonator, localized drug delivery at a confined spatial location and tunable arrays of the resonators that are compatible with multiwell plate can be achieved. The hypersonic poration method shows great delivery efficacy combined with advantage of scalability, tunable throughput, and simplification in operation and provides a potentially powerful strategy in the field of molecule delivery, cell transfection, and gene therapy.
RESUMEN
Controlled drug release has a high priority for the development of modern medicine and biochemistry. To develop a versatile method for controlled release, a miniaturized acoustic gigahertz (GHz) resonator is designed and fabricated which can transfer electric supply to mechanical vibrations. By contacting with liquid, the GHz resonator directly excites streaming flows and induces physical shear stress to tear the multilayered polyelectrolyte (PET) thin films. Due to the ultra-high working frequency, the shear stress is greatly intensified, which results in a controlled disassembling of the PET thin films. This technique is demonstrated as an effective method to trigger and control the drug release. Both theory analysis and controlled release experiments prove the thin film destruction and the drug release.