Microwell Array Based Opto-Electrochemical Detections Revealing Co-Adaptation of Rheological Properties and Oxygen Metabolism in Budding Yeast.

Microdevices composed of microwell arrays integrating nanoelectrodes (OptoElecWell) are developed to achieve dual high-resolution optical and electrochemical detections on single Saccharomyces cerevisiae yeast cells. Each array consists of 1.6 × 105 microwells measuring 8 µm in diameter and 5 µm height, with a platinum nanoring electrode for in situ electrochemistry, all integrated on a transparent thin wafer for further high-resolution live-cell imaging. After optimizing the filling rate, 32% of cells are effectively trapped within microwells. This allows to analyse S. cerevisiae metabolism associated with basal respiration while simultaneously measuring optically other cellular parameters. In this study, the impact of glucose concentration on respiration and intracellular rheology is focused. It is found that while the oxygen uptake rate decreases with increasing glucose concentration, diffusion of tracer nanoparticles increases. The OptoElecWell-based respiration methodology provides similar results compared to the commercial gold-standard Seahorse XF analyzer, while using 20 times fewer biological samples, paving the way to achieve single cell metabolomics. In addition, it facilitates an optical route to monitor the contents within single cells. The proposed device, in combination with the dual detection analysis, opens up new avenues for measuring cellular metabolism, and relating it to cellular physiological indicators at single cell level.

Microwell array integrating nanoelectrodes for coupled opto-electrochemical monitorings of single mitochondria.

Chips composed of microwell arrays integrating nanoelectrodes (OptoElecWell) were developed to achieve dual optical and electrochemical detections on isolated biological entities. Each array consists in 106 microwells of 6 µm diameter × 5.2 µm height each, with a transparent bottom surface for optical observations, a platinum nano-ring electrode at its half-height for in situ electrochemistry, and a top open surface to inject solutions. Then, populations of individual mitochondria isolated from yeasts (Saccharomyces cerevisiae) were let to sediment on the array and be trapped within microwells. The trapping efficiency reached 20% but owing to the large number of microwells on the platform, hundreds of them could be filled simultaneously by single mitochondria. This allowed to follow up their individual energetic status based on fluorescence microscopy of their endogenous NADH. Simultaneously, the array of interconnected Pt nanoelectrodes in the microwells was used to monitor in situ variations of dioxygen consumed by all mitochondria captured in the device. Mitochondrial bioenergetics were modulated sequentially using respiratory chain-ATP synthase substrates (ethanol and ADP) and inhibitor (antimycin A). Overall, we show how two complementary analytical approaches, fluorescence and electrochemical detections, can be coupled for a multi-parametric monitoring of mitochondrial activities, with a resolution ranging from a small population (whole device) to the single mitochondrion level (unique well).

Modelling of impulsional pH variations using ChemFET-based microdevices: application to hydrogen peroxide detection.

This work presents the modelling of impulsional pH variations in microvolume related to water-based electrolysis and hydrogen peroxide electrochemical oxidation using an Electrochemical Field Effect Transistor (ElecFET) microdevice. This ElecFET device consists of a pH-Chemical FET (pH-ChemFET) with an integrated microelectrode around the dielectric gate area in order to trigger electrochemical reactions. Combining oxidation/reduction reactions on the microelectrode, water self-ionization and diffusion properties of associated chemical species, the model shows that the sensor response depends on the main influential parameters such as: (i) polarization parameters on the microelectrode, i.e., voltage (Vp) and time (t(p)); (ii) distance between the gate sensitive area and the microelectrode (d); and (iii) hydrogen peroxide concentration ([H2O2]). The model developed can predict the ElecFET response behaviour and creates new opportunities for H2O2-based enzymatic detection of biomolecules.

Unexpected effect of copper ions on electrochemical impedance behaviour of self-assembled alkylaminethiol monolayer.

Effect of copper ions on the electrochemical behaviour of an alkylaminethiol monolayer has been studied by electrochemical impedance spectrosocpy. RAMAN experiment shows the effective adsorption of receptor onto the gold surfaces. The study of Nyquist plot shows that the gold/monolayer/electrolyte interface can be described by a serial combination of two R, CPE electrical circuits. In the presence of increasing amounts of copper, the Nyquist plots at low frequencies were modified showing an increase of the resistance of the second R, CPE electrical circuit. Moreover, this increase of resistance varies linearly with the amounts of copper ions added in solution from 10(-8) mol·L(-1) to 10(-5) mol·L(-1).

Salt release monitoring with specific sensors in "in vitro" oral and digestive environments from soft cheeses.

The objective of the present work is to demonstrate the interest and the feasibility of the measurement of NaCl concentrations in soft cheeses and in particular an in vitro digestion process by the use of chemical sensors. The analyzed matrices were the commercial Italian mozzarella cheeses and domestic cheese base models. The classification of mozzarellas was performed according to their salinity, while the breakdown of cheese base models has been followed both at initial steps of digestion in artificial mouth dispositive mimicking the oral sphere and in a gut-imitating digester (TIM-1). During the breakdown of soft cheese in the digester, the estimated values for Na(+) concentration using mono-Na-ISEs showed correlation coefficients values about 0.907 and 0.832 compared to Ionic Chromatography (IC) reference values, with an important relative error (about 30-40%). The use of ISE array system combining several electrodes, in particular electrodes showing more selectivity to Cl(-) and Na(+) ions, showed the best results for Na(+) concentration estimation, with good correlations both in calibration (R=0.962) and in validation (R=0.952) steps. For cheese digestion in the artificial mouth, good correlations for Na(+) concentration were observed using single Na-ISE compared to IC with coefficients ranking between 0.93 and 0.96 for both the calibration and validation steps. Moreover, a fair correlation between chloride ions measured with Cl-ISE2 and Na(+) (R=0.96) was found. The best results were obtained with the use of ISEs array combining, in particular, Cl(-) and Na(+) detections. The salinity of commercial mozzarella cheese samples, as far as originally utilized milk type (cow or buffalo), were also satisfactory determined with developed ISE array.

Study of Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile for odorant biosensors.

To make ultrathin films for the fabrication of artificial olfactory systems, odorant biosensors, we have investigated mixed Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile. Under optimized experimental conditions (phosphate buffer solution, pH 7.5, OBP-1F concentration of 4 mg L(-1), target pressure 35 mN m(-1)), the mixed monolayer at the air/water interface is very stable and has been efficiently transferred onto gold supports, which were previously functionalized by self-assembled monolayers (SAMs) with 1-octadecanethiol (ODT). Atomic force microscopy and electrochemical impedance spectroscopy were used to characterize mixed Langmuir-Blodgett (LB) films before and after contact with a specific odorant molecule, isoamyl acetate. AFM phase images show a higher contrast after contact with the odorant molecule due to the new structure of the OBP-1F/ODA LB film. Non-Faradaic electrochemical spectroscopy (EIS) is used to quantify the effect of the odorant based on the electrical properties of the OBP-1F/ODA LB film, as its resistance strongly decreases from 1.18 MOmega (before contact) to 25 kOmega (after contact).