Perovskite-Like Liquid-Crystalline Materials Based on Polyfluorinated Imidazolium Cations.

Hybrid Organic-Inorganic Halide Perovskites (HOIHPs) represent an emerging class of semiconducting materials, widely employed in a variety of optoelectronic applications. Despite their skyrocket growth in the last decade, a detailed understanding on their structure-property relationships is still missing. In this communication, we report two unprecedented perovskite-like materials based on polyfluorinated imidazolium cations. The two materials show thermotropic liquid crystalline behavior resulting in the emergence of stable mesophases. The manifold intermolecular F ⋅ ⋅ ⋅ F interactions are shown to be meaningful for the stabilization of both the solid- and liquid-crystalline orders of these perovskite-like materials. Moreover, the structure of the incorporated imidazolium cation was found to tune the properties of the liquid crystalline phase. Collectively, these results may pave the way for the design of a new class of halide perovskite-based soft materials.

Novel Class of Crystal/Glass Ultrafine Nanolaminates with Large and Tunable Mechanical Properties.

The control of local heterogeneities in metallic glasses (MGs) represents an emerging field to improve their plasticity, preventing the propagation of catastrophic shear bands (SBs) responsible for the macroscopically brittle failure. To date, a nanoengineered approach aimed at finely tuning local heterogeneities controlling SB nucleation and propagation is still missing, hindering the potential to develop MGs with large and tunable strength/ductility balance and controlled deformation behavior. In this work, we exploited the potential of pulsed laser deposition (PLD) to synthesize a novel class of crystal/glass ultrafine nanolaminates (U-NLs) in which a ∼4 nm thick crystalline Al separates 6 and 9 nm thick Zr50Cu50 glass nanolayers, while reporting a high density of sharp interfaces and large chemical intermixing. In addition, we tune the morphology by synthesizing compact and nanogranular U-NLs, exploiting, respectively, atom-by-atom or cluster-assembled growth regimes. For compact U-NLs, we report high mass density (∼8.35 g/cm3) and enhanced and tunable mechanical behavior, reaching maximum values of hardness and yield strength of up to 9.3 and 3.6 GPa, respectively. In addition, we show up to 3.6% homogeneous elastoplastic deformation in compression as a result of SB blocking by the Al-rich sublayers. On the other hand, nanogranular U-NLs exhibit slightly lower yield strength (3.4 GPa) in combination with enhanced elastoplastic deformation (∼6%) followed by the formation of superficial SBs, which are not percolative even at deformations exceeding 15%, as a result of the larger free volume content within the cluster-assembled structure and the presence of crystal/glass nanointerfaces, enabling to accommodate SB events. Overall, we show how PLD enables the synthesis of crystal/glass U-NLs with ultimate control of local heterogeneities down to the atomic scale, providing new nanoengineered strategies capable of deep control of the deformation behavior, surpassing traditional trade-off between strength and ductility. Our approach can be extended to other combinations of metallic materials with clear interest for industrial applications such as structural coatings and microelectronics (MEMS and NEMS).

Structural Insights on the Role of Halogen Bonding in Protein MEK Kinase-Inhibitor Complexes.

Kinases are enzymes that play a critical role in governing essential biological processes. Due to their pivotal involvement in cancer cell signaling, they have become key targets in the development of anti-cancer drugs. Among these drugs, those containing the 2,4-dihalophenyl moiety demonstrated significant potential. Here we show how this moiety, particularly the 2-fluoro-4-iodophenyl one, is crucial for the structural stability of the formed drug-enzyme complexes. Crystallographic analysis of reported kinase-inhibitor complex structures highlights the role of the halogen bonding that this moiety forms with specific residues of the kinase binding site. This interaction is not limited to FDA-approved MEK inhibitors, but it is also relevant for other kinase inhibitors, indicating its broad relevance in the design of this class of drugs.

Acid⋠⋠⋠Amide Supramolecular Synthon for Tuning Amino Acid-Based Hydrogels' Properties.

Invited for the cover of this issue is the Laboratory of Supramolecular and Bio-Nanomaterials, coordinated by Pierangelo Metrangolo, at the Politecnico di Milano, Italy. The image depicts the co-crystal formed by N-Fmoc-pentafluorophenylalanine and benzamide, which is also involved in the formation of their mixed hydrogels. Read the full text of the article at 10.1002/chem.202301743.

Fluoride Anions: Unexploited but Effective Halogen Bond Acceptors.

Due to their high electron density, fluoride anions can be considered the most effective halogen bond (HaB) acceptors among the halides. However, under common experimental conditions, F- uncommonly acts as HaB acceptor, expectedly as it is present in hydrated form. Herein we report that under specific crystallization conditions a hydrogen bond-free F- functioning as donor of electron density can be obtained, with the formed HaBs constituting the driving force of the observed crystal packings. Computations confirm the strength of these HaBs compared to analogous interactions involving other halides.

Acid⋠⋠⋠Amide Supramolecular Synthon for Tuning Amino Acid-Based Hydrogels' Properties.

Supramolecular hydrogels formed by the self-assembly of N-Fmoc-l-phenylalanine derivatives are gaining relevance for several applications in the materials and biomedical fields. In the challenging attempt to predict or tune their properties, we selected Fmoc-pentafluorophenylalanine (1) as a model efficient gelator, and studied its self-assembly in the presence of benzamide (2), a non-gelator able to form strong hydrogen bonds with the amino acid carboxylic group. Equimolar mixtures of 1 and 2 in organic solvents afforded a 1 : 1 co-crystal thanks to the formation of an acid⋅⋅⋅amide heterodimeric supramolecular synthon. The same synthon occurred in the transparent gels formed by mixing the two components in 1 : 1 ratio in aqueous media, as revealed by structural, spectroscopic, and thermal characterizations performed on both the co-crystal powder and the lyophilized hydrogel. These findings revealed the possibility of modulating the properties of amino acid-based hydrogels by involving the gelator in the formation of a co-crystal. Such a crystal engineering-based approach is shown also to be useful for the time-delayed release of suitable bioactive molecules, when involved as hydrogel coformers.

Structural effects on the luminescence properties of CsPbI3 nanocrystals.

Metal halide perovskite nanocrystals (NCs) are promising for photovoltaic and light-emitting applications. Due to the softness of their crystal lattice, structural modifications have a critical impact on their optoelectronic properties. Here we investigate the size-dependent optoelectronic properties of CsPbI3 NCs ranging from 7 to 17 nm, employing temperature and pressure as thermodynamic variables to modulate the energetics of the system and selectively tune the interatomic distances. By temperature-dependent photoluminescence spectroscopy, we have found that luminescence quenching channels exhibit increased non-radiative losses and weaker exciton-phonon coupling in bigger particles, in turn affecting the luminescence efficiency. Through pressure-dependent measurements up to 2.5 GPa, supported by XRD characterization, we revealed a NC-size dependent solid-solid phase transition from the γ-phase to the δ-phase. Importantly, the optical response to these structural changes strongly depends on the size of the NC. Our findings provide an interesting guideline to correlate the size and structural and optoelectronic properties of CsPbI3 NCs, important for engineering the functionalities of this class of soft semiconductors.

Systematic Study of Podand Molecules for Synergistic Halogen and Hydrogen Bond-Driven Anion Recognition in the Solid State.

The increasing demand of species for the efficient capture and sensing of anions benefits from a systematic study of anion binding capabilities in the solid state. This work reports a detailed crystallographic study of ten structurally related podands and shows that these charged receptors bind anions with a combination of charge-assisted halogen and hydrogen bonds. Computational tools helped in highlighting the role of the different involved interaction and afforded possible design principles for the design of improved podands.

The N,N,N-trimethylammonium moiety as tetrel bond donor site: crystallographic and computational studies.

Five structures bearing the N,N,N-trimethylammonium unit have been investigated to address the ability of the N+-CH3 unit to function as a tetrel bond donor site. Charged and neutral electron density donors display close contacts with different carbon atoms of methyl groups on the ammonium moiety. The Hirshfeld atom refinement (HAR) technique was used on selected structures to accurately and precisely determine the hydrogen atom positions and, consequently, to get better insights into the N+-C⋯Nu (Nu = nucleophile) interactions occurring in the crystals. In particular, the performed analyses highlighted specific geometrical features of the moieties involved in the interactions and allowed distinguishing between tetrel and hydrogen bonds.

High-resolution crystal structure of a 20 kDa superfluorinated gold nanocluster.

Crystallization of atomically precise nanoclusters is gaining increasing attention, due to the opportunity of elucidating both intracluster and intercluster packing modes, and exploiting the functionality of the resulting highly pure crystallized materials. Herein, we report the design and single-crystal X-ray structure of a superfluorinated 20 kDa gold nanocluster, with an Au25 core coated by a shell of multi-branched highly fluorinated thiols (SF27) resulting in almost 500 fluorine atoms, i.e., ([Au25(SF27)18]0). The cluster shows a switchable solubility in the fluorous phase. X-ray analysis and computational studies reveal the key role of both intracluster and intercluster F···F contacts in driving [Au25(SF27)18]0 crystal packing and stabilization, highlighting the ability of multi-branched fluorinated thiols to endow atomically precise nanoclusters with remarkable crystallogenic behavior.

Halogen Bonding in Perovskite Solar Cells: A New Tool for Improving Solar Energy Conversion.

Hybrid organic-inorganic halide perovskites (HOIHPs) have recently emerged as a flourishing area of research. Their easy and low-cost production and their unique optoelectronic properties make them promising materials for many applications. In particular, HOIHPs hold great potential for next-generation solar cells. However, their practical implementation is still hindered by their poor stability in air and moisture, which is responsible for their short lifetime. Optimizing the chemical composition of materials and exploiting non-covalent interactions for interfacial and defects engineering, as well as defect passivation, are efficient routes towards enhancing the overall efficiency and stability of perovskite solar cells (PSCs). Due to the rich halogen chemistry of HOIHPs, exploiting halogen bonding, in particular, may pave the way towards the development of highly stable PSCs. Improved crystallization and stability, reduction of the surface trap states, and the possibility of forming ordered structures have already been preliminarily demonstrated.

Tunable Linear and Nonlinear Optical Properties from Room Temperature Phosphorescent Cyclic Triimidazole-Pyrene Bio-Probe.

Organic materials with multiple emissions tunable by external stimuli represent a great challenge. TTPyr, crystallizing in different polymorphs, shows a very rich photophyisics comprising excitation-dependent fluorescence and phosphorescence at ambient conditions, and mechanochromic and thermochromic behavior. Transformation among the different species has been followed by thermal and X-ray diffraction analyses and the emissive features interpreted through structural results and DFT/TDDFT calculations. Particularly intriguing is the polymorph TTPyr(HT), serendipitously obtained at high temperature but stable also at room temperature, whose non-centrosymmetric structure guarantees an SHG efficiency 10 times higher than that of standard urea. Its crystal packing, where only the TT units are strongly rigidified by π-π stacking interactions while the Pyr moieties possess partial conformational freedom, is responsible for the observed dual fluorescence. The potentialities of TTPyr for bioimaging have been successfully established.

Anion⋠⋠⋠Anion Interactions Involving σ-Holes of Perrhenate, Pertechnetate and Permanganate Anions.

In this communication experimental and theoretical results are reported affording strong evidence that interactions between electron rich atoms and the metal of tetroxide anions of group 7 elements are a new case of attractive and σ-hole interactions. Single crystal X-ray analyses, molecular electrostatic potentials, quantum theory of atoms-in-molecules, and noncovalent interaction plot analyses show that in crystalline permanganate and perrhenate salts the metal in Mn/ReO4- anion can act as electron acceptors, the oxygen of another Mn/ReO4- anion can act as the donor and supramolecular anionic dimers or polymers are formed. The name matere bond (MaB) is proposed to categorize these noncovalent interactions and to differentiate them from the classical metal-ligand coordination bond.

Waterproof-breathable films from multi-branched fluorinated cellulose esters.

Cellulose ester films were prepared by esterification of cellulose with a multibranched fluorinated carboxylic acid, "BRFA" (BRanched Fluorinated Acid), at different anhydroglucose unit:BRFA molar ratios (i.e., 1:0, 10:1, 5:1, and 1:1). Morphological and optical analyses showed that cellulose-BRFA materials at molar ratios 10:1 and 5:1 formed flat and transparent films, while the one at 1:1 M ratio formed rough and translucent films. Degrees of substitution (DS) of 0.06, 0.09, and 0.23 were calculated by NMR for the samples at molar ratios 10:1, 5:1, and 1:1, respectively. ATR-FTIR spectroscopy confirmed the esterification. DSC thermograms showed a single glass transition, typical of amorphous polymers, at -11 °C. The presence of BRFA groups shifted the mechanical behavior from rigid to ductile and soft with increasing DS. Wettability was similar to standard fluoropolymers such as PTFE and PVDF. Finally, breathability and water uptake were characterized and found comparable to materials typically used in textiles.

Molecular Electrostatic Potential and Noncovalent Interactions in Derivatives of Group 8 Elements.

This communication reports experimental and theoretical evidences of σ-hole interactions in adducts between nitrogen or oxygen nucleophiles and tetroxides of osmium or other group 8 elements. Cocrystals between pyridine or pyridine N-oxide derivatives and osmium tetroxide are characterized through various techniques and rationalized as σ-hole interactions using DFT calculations and several other computational tools. We propose the term "osme bond" (OmB, Om=Fe, Ru, Os, (Hs)) for naming the noncovalent interactions wherein group 8 elements have the role of the electrophile. The word osme is the transcription of ὀσµÎ®, the ancient Greek word for smell that was used to name the heaviest group 8 element in relation to the smoky odor of its tetroxide.

Anion⋠⋠⋠Anion Coinage Bonds: The Case of Tetrachloridoaurate.

Interactions in crystalline tetrachloridoaurates of acetylcholine and dimethylpropiothetine are characterized by Au⋅⋅⋅Cl and Au⋅⋅⋅O short contacts. The former interactions assemble the AuCl4 - units into supramolecular anionic polymers, while the latter interactions append the acetylcholine and propiothetine units to the polymer. The distorted octahedral geometry of the bonding pattern around the gold center is rationalized on the basis of the anisotropic distribution of the electron density, which enables gold to behave as an electrophile (π-hole coinage-bond donor). Computational studies prove that gold atoms in negatively charged species can function as acceptors of electron density. The attractive nature of the Au⋅⋅⋅Cl/O interactions described here complement the known aurophilic bonds involved in gold-centered interactions.

Tuning of Ionic Liquid Crystal Properties by Combining Halogen Bonding and Fluorous Effect.

We report halogen-bonded complexes between 1-polyfluoroalkyl-3-alkylimidazolium iodides and mono-iodoperfluoroalkanes of different chain lengths or di-iodoperfluorooctane. 19 F NMR analyses revealed that the preferred stoichiometry between the donors and acceptors is 1 : 1 in the cases of the mono-iodoperfluoroalkanes, and 2 : 1 with di-iodoperfluorooctane, as a result of the monodentate behavior of the iodide anion (halogen bond acceptor). Single crystal X-ray diffraction analyses showed the presence of a perfluorinated superanion, which interdigitates with the cation fluorinated chains, favoring the formation of lamellar structures. All of the obtained supramolecular complexes exhibit enantiotropic liquid crystalline phases over a broad range of temperatures. Most of the obtained complexes show melting points lower than 100 °C, two of them being liquid at room temperature, thus representing a new family of fluorinated ionic liquid crystals.

A Step toward the Quantification of Noncovalent Interactions in Large Biological Systems: The Independent Gradient Model-Extremely Localized Molecular Orbital Approach.

The independent gradient model (IGM) is a recent electron density-based computational method that enables to detect and quantify covalent and noncovalent interactions. When applied to large systems, the original version of the technique still relies on promolecular electron densities given by the sum of spherically averaged atomic electron distributions, which leads to approximate evaluations of the inter- and intramolecular interactions occurring in systems of biological interest. To overcome this drawback and perform IGM analyses based on quantum mechanically rigorous electron densities also for macromolecular systems, we coupled the IGM approach with the recently constructed libraries of extremely localized molecular orbitals (ELMOs) that allow fast and reliable reconstructions of polypeptide and protein electron densities. The validation tests performed on small polypeptides and peptide dimers have shown that the novel IGM-ELMO strategy provides results that are systematically closer to the fully quantum mechanical ones and outperforms the IGM method based on the crude promolecular approximation, but still keeping a quite low computational cost. The results of the test calculations carried out on proteins have also confirmed the trends observed for the IGM analyses conducted on small systems. This makes us envisage the future application of the novel IGM-ELMO approach to unravel complicated noncovalent interaction networks (e.g., in protein-protein contacts) or to rationally design new drugs through molecular docking calculations and virtual high-throughput screenings.

The Relevance of Size Matching in Self-assembly: Impact on Regio- and Chemoselective Cocrystallizations.

Decamethonium diiodide is reported to perform the chemo- and regioselective encapsulation of para-dihalobenzenes through the competitive formation of halogen-bonded cocrystals starting from solutions that also contain ortho and meta isomers. Selective caging in the solid occurs even when an excess ortho or meta isomers, or even a mixture of them, is present in the solution. A prime matching between the size and shape of the dication and the formed dianions plays a key role in enabling the selective self-assembly, as proven by successful encapsulation of halogen-bond donors as weak as 1,4-dichlorobenzene and by the results of cocrystallization trials involving mismatching tectons. Encapsulated para-dihalobenzenes guest molecules can be removed quantitatively by heating the cocrystals under reduced pressure and be recovered as pure materials. The residual decamethonium diiodide can be recycled with no reduction in selectivity.

Radicalradical chalcogen bonds: CSD analysis and DFT calculations.

This manuscript reports a combination of crystallographic analysis (Cambridge Structural Database) and theoretical DFT calculations in chalcogen bonding interactions involving radicals in both the Ch bond (ChB) donor and acceptor. As a radical ChB acceptor (nucleophile) we have used benzodithiazolyl radical (BDTA) and as Ch bond donors (electrophile) we have used dithiadiazolyl and diselenadiazolyl radicals of the general formula p-X-C6F4-CNChChN (Ch = S, and Se). We have evaluated how the para substituent (X) affects the interaction energy, spin density and charge/spin transfer from the electron rich BDTA radical to the electron poor dichalcogenadiazolyl ring. The ability of the latter rings to form ChBs in the solid state has been examined by a comprehensive search in the CSD; several cases are used to exemplify the preferred geometric features of the complexes and they are compared with the theory. The molecular surface electrostatic potentials calculated for these ChB donors allow for a very precise rationalization of the self-assembly motifs most frequently adopted in the crystalline state and of their relative robustness.