Synthesis and Characterization of Thiol-Ene Networks Derived from Levoglucosenone.

Levoglucosenone (LGO), a renewable compound obtained from cellulose biomass, has been utilized to prepare novel monomers bearing alkene functional groups. These monomer derivatives of LGO were subsequently cured via ultraviolet (UV)-initiated radical thiol-ene "click" chemistry with commercially available multifunctional thiols to obtain colourless, optically transparent cross-linked thermosets. The monomers prepared in this work are unique due to utilising the internal double bond of the LGO ring during polymerization as part of the cross-linked network. The thermal and mechanical properties along with the degradation of thermosets containing both ether and ester linkages within the LGO monomers were studied. These thermosets had tensile strengths of 1.3-3.3 MPa, glass transition temperatures between 23.2 and 27.2 °C, and good thermal stability of up to 300 °C.

Effect of crosslinker/porogen ratio on sponge-nested polymer monoliths for solid-phase extraction.

Polymer monoliths can be polymerised within different molds, but limited options are available for the preparation of free-standing polymer monoliths for analytical sample preparation, and in particular, solid-phase extraction (SPE). Commercial melamine-formaldehyde sponges can be used as supports for the preparation of polymer monoliths, due its flexibility, giving various shapes to monoliths. Herein, the crosslinker/porogen ratio of highly porous sponge-nested divinylbenzene (DVB) polymer monoliths has been evaluated. Monoliths prepared using different crosslinker/porogen ratios were applied to the extraction of bisphenol F, bisphenol A, bisphenol AF, and bisphenol B. Monoliths containing 50 wt % DVB and 50 wt % porogens presented the highest recovery of bisphenols. Under the optimised conditions, the developed method showed a linear range between 2.5 µg L-1 and 150 µg L-1 for BPA and BPAF, and between 5 µg L-1 and 150 µg L-1 for BPB and BPF. The limits of detection (LOD, S/N = 3) and limits of quantification (LOQ, S/N = 10) ranged from 0.36 µg L-1 to 1.09 µg L-1, and from 1.20 µg L-1 to 3.65 µg L-1, respectively. The recoveries for spiked bisphenols (10 µg L-1) in tap water and water contained in a polycarbonate containers were between 82 % and 114 %.

Applications of Functional Polymeric Eutectogels.

Over the past two decades, deep eutectic solvents (DESs) have captured significant attention as an emergent class of solvents that have unique properties and applications in differing fields of chemistry. One area where DES systems find utility is the design of polymeric gels, often referred to as "eutectogels," which can be prepared either using a DES to replace a traditional solvent, or where monomers form part of the DES themselves. Due to the extensive network of intramolecular interactions (e.g., hydrogen bonding) and ionic species that exist in DES systems, polymeric eutectogels often possess appealing material properties-high adhesive strength, tuneable viscosity, rapid polymerization kinetics, good conductivity, as well as high strength and flexibility. In addition, non-covalent crosslinking approaches are possible due to the inherent interactions that exist in these materials. This review considers several key applications of polymeric eutectogels, including organic electronics, wearable sensor technologies, 3D printing resins, adhesives, and a range of various biomedical applications. The design, synthesis, and properties of these eutectogels are discussed, in addition to the advantages of this synthetic approach in comparison to traditional gel design. Perspectives on the future directions of this field are also highlighted.

Lawesson's Reagent: Providing a New Approach to the Forgotten 6-Thioverdazyl Radical.

A new method for the preparation of the underrepresented 1,5-dimethyl-6-thioverdazyl radicals has been developed employing Lawesson's reagent (LR). The synthetic route involves the direct thionation of the carbonyl group of the corresponding dialkylbishydrazone followed by cyclization to give the tetrazinanthione verdazyl precursor on a gram scale. Subsequent oxidation yields the 6-thioverdazyl radical. It was determined that thionation of substrates containing electron-withdrawing groups in the ortho- or para-positions was high yielding. In contrast, for the parent phenyl group or substrates bearing weakly electron-donating substituents, thionation efficiency was significantly reduced. This could be overcome by utilizing partial in situ cyclization, which occurs during work up, to generate the tetrazinanthione directly via a one-pot synthesis. Density functional theory suggests that the LR fragment interacts with the carbonyl prior to cycloaddition and subsequent to cycloreversion, leading to the thiocarbonyl. The electronic nature of the radical is characterized with electron paramagnetic resonance as well as the first report of 6-thioverdazyl redox properties.

"Dissolve-on-Demand" 3D Printed Materials: Polymerizable Eutectics for Generating High Modulus, Thermoresponsive and Photoswitchable Eutectogels.

Solvent-free photopolymerization of vinyl monomers to produce high modulus materials with applications in 3D printing and photoswitchable materials is demonstrated. Polymerizable eutectic (PE) mixtures are prepared by simply heating and stirring various molar ratios of N-isopropylacrylamide (NIPAM), acrylamide (AAm) and 2-hydroxyethyl methacrylate (HEMA). The structural and thermal properties of the resulting mixtures are evaluated by 1D and 2D NMR spectroscopy as well as differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). UV photocuring kinetics of the PE mixtures is evaluated via in situ photo-DSC and photorheology measurements. The PE mixtures cure rapidly and display storage moduli that are orders of magnitude greater than equivalent copolymers cured in an aqueous medium. The versatility of these PE systems is demonstrated through the addition of a photoswitchable spiropyran acrylate monomer, as well as applying the PE formulation as a stereolithography (SLA)-based 3D printing resin. Due to the hydrogen-bonding network in PE systems, 3D printing of the eutectic resin is possible in the absence of crosslinkers. The addition of a RAFT agent to reduce average polymer chain length enables 3D printing of materials which retain their shape and can be dissolved on demand in appropriate solvents.

Photochemical Povarov-type Reactions: Electron Donor-Acceptor Photoactivation by Visible Light.

This report investigates the mechanism of photochemical Povarov-type reactions of N,N-dialkylanilines and maleimides in polar solvents (DMF or dioxane) in the presence of light. Fundamental aspects of the electron donor-acceptor (EDA) photoactivation pathway proposed to underpin this chemistry are examined through integrated experimental and computational studies. This approach provided evidence supporting the involvement of an EDA complex in facilitating this chemistry via a reaction mechanism that does not involve a triplet manifold. Most notably, our findings indicate that relying solely on UV-vis absorption spectroscopic data to either account for or predict reactivity in synthetic experiments may not always provide the complete picture. More specifically, this relates to considering UV-vis absorption spectroscopic data, calculated values for association constants (KEDA) and molar extinction coefficients (ε), with the reactivity observed in associated synthetic reactions in practice.

Sponge-nested polymer monoliths: Versatile materials for the solid-phase extraction of bisphenols.

Polymer monoliths are promising materials for sample preparation due to their high porosity, pH stability, and simple preparation. The use of melamine formaldehyde foams has been reported as an effective support to prepare highly robust silica and polymer monoliths. Herein, divinylbenzene monoliths based on a 50:50 (%, w/w) crosslinker/porogen ratio have been nested within a melamine-formaldehyde sponge, resulting in monoliths with a surface area higher than 400 m2 /g. The extraction performance of these monoliths was evaluated for the extraction of endocrine-disrupting bisphenols from aqueous solutions. We evaluated for the first time the versatility of sponge-nested polymer monoliths by comparing three different extraction modes (vortex mixing, magnetic stirring, and orbital shaking). Vortex mixing showed a comparable recovery of bisphenols (39%-81%) in a shorter extraction time (30 min, instead of 2 h). In addition, the robustness of the sponge-nested polymer monoliths was demonstrated for the first time by reshaping a larger monolithic cube (0.125 cm3 ) into four smaller pieces (4 × 0.03125 cm3 ) leading to a 16%-21% increase in extraction efficiency. This effect was attributed to an increase in the effective contact area with the sample, obtaining a higher analyte extraction capacity.

Sponge-nested polymer monolith sorptive extraction.

Polymer monoliths are an alternative to traditional particle-packed supports used in solid-phase extraction because of their ease of preparation, high porosity, and pH stability. They often required the attachment of monoliths to a support, such as the internal walls of a column to enable their use for sample preparation. Applications of free-standing polymer monoliths are rarely found because of their limited mechanical stability. Herein, divinylbenzene monoliths were polymerised within a commercial melamine-formaldehyde sponge using different polymerisation times. The sponge-nested polymer monoliths are highly robust, and their size and shape can be easily adjusted for desired applications. The prepared sponge-nested polymer monoliths had surface areas in the range of 237 m2 g-1 to 369 m2 g-1. A melamine-formaldehyde sponge cut into 1 cm3 cubes were used to template the polymer monoliths. Miniaturized monoliths with a size of 0.125 cm3 were directly cut from the larger cubes without compromising the integrity of the porous monolith structure. The resulting nested monolith sorptive extraction (NMSE) supports were applied for the extraction of the endocrine disruptors bisphenol A, 4-tert-butylphenol, and 4-tert-octylphenol. The prepared sponge-nested monoliths are low-cost (40 monoliths/AU$). NMSE was carried out by the direct immersion of the monoliths in the aqueous standards/samples, requiring only an orbital shaker for the extraction procedure. Best performance was obtained for polymer monoliths polymerized for 6 h, enabling limits of detection of 5.6 to 6.5 µg L-1 for the selected analysis using HPLC-UV.

Photoactive Metal Carbonyl Complexes Bearing N-Heterocyclic Carbene Ligands: Synthesis, Characterization, and Viability as Photoredox Catalysts.

This report details the synthesis and characterization of a small family of previously unreported, structurally related chromium, molybdenum, tungsten, manganese, and iron complexes bearing N-heterocyclic carbene and carbonyl supporting ligands. These complexes have the general form [ML(CO)3X] or [ML(CO)3], where X = CO or Br and L = 1-phenyl-3-(2-pyridyl)imidazolin-2-ylidene. Where possible, the solid-state, spectroscopic, electrochemical, and photophysical properties of these molecules were studied using a combination of experiment and theory. Photophysical studies reveal that decarbonylation occurs when these complexes are exposed to ultraviolet light, with the CO ligand being replaced with a labile acetonitrile solvent molecule. To obtain insights into the potential utility, scope, and applications of these complexes in visible-light-mediated photoredox catalysis, their capacity to facilitate a range of photoinduced reactions via the reductive or oxidative functionalization of organic molecules was investigated. These chromium, molybdenum, and manganese catalysts efficiently facilitated atom-transfer radical addition processes. In light of their photolability, these types of catalysts may potentially allow for the development of photoinduced reactions involving less conventional inner-sphere electron-transfer pathways.

Utilizing RAFT Polymerization for the Preparation of Well-Defined Bicontinuous Porous Polymeric Supports: Application to Liquid Chromatography Separation of Biomolecules.

Polymer-based monolithic high-performance liquid chromatography (HPLC) columns are normally obtained by conventional free-radical polymerization. Despite being straightforward, this approach has serious limitations with respect to controlling the structural homogeneity of the monolith. Herein, we explore a reversible addition-fragmentation chain transfer (RAFT) polymerization method for the fabrication of porous polymers with well-defined porous morphology and surface chemistry in a confined 200 µm internal diameter (ID) capillary format. This is achieved via the controlled polymerization-induced phase separation (controlled PIPS) synthesis of poly(styrene-co-divinylbenzene) in the presence of a RAFT agent dissolved in an organic solvent. The effects of the radical initiator/RAFT molar ratio as well as the nature and amount of the organic solvent were studied to target cross-linked porous polymers that were chemically bonded to the inner wall of a modified silica-fused capillary. The morphological and surface properties of the obtained polymers were thoroughly characterized by in situ nuclear magnetic resonance (NMR) experiments, nitrogen adsorption-desorption experiments, elemental analyses, field-emission scanning electron microscopy (FESEM), scanning electron microscopy-energy-dispersive X-ray (SEM-EDX) spectroscopy, and X-ray photoelectron spectroscopy (XPS) as well as time-of-flight secondary ion mass spectrometry (ToF-SIMS) revealing the physicochemical properties of these styrene-based materials. When compared with conventional synthetic methods, the controlled-PIPS approach affects the kinetics of polymerization by delaying the onset of phase separation, enabling the construction of materials with a smaller pore size. The results demonstrated the potential of the controlled-PIPS approach for the design of porous monolithic columns suitable for liquid separation of biomolecules such as peptides and proteins.

Structural Complexity of Graphene Oxide: The Kirigami Model.

Investigation of highly oxidized graphene oxide (GO) by solid-state nuclear magnetic resonance (NMR) spectroscopy has revealed an exceptional level of hitherto undiscovered structural complexity. A number of chemical moieties were observed for the first time, such as terminal esters, furanic carbons, phenolic carbons, and three distinct aromatic and two distinct alkoxy carbon moieties. Quantitative one-dimensional (1D) and two-dimensional (2D) 13C{1H} NMR spectroscopy established the relative populations and connectivity of these different moieties to provide a consistent "local" chemical structure model. An inferred 2 nm GO sheet size from a very large (∼20%) edge carbon fraction by NMR analysis is at odds with the >20 nm sheet size determined from microscopy and dynamic light scattering. A proposed kirigami model where extensive internal cuts/tears in the basal plane provide the necessary edge sites is presented as a resolution to these divergent results. We expect this work to expand the fundamental understanding of this complex material and enable greater control of the GO structure.

Greener, Faster, Stronger: The Benefits of Deep Eutectic Solvents in Polymer and Materials Science.

Deep eutectic solvents (DESs) represent an emergent class of green designer solvents that find numerous applications in different aspects of chemical synthesis. A particularly appealing aspect of DES systems is their simplicity of preparation, combined with inexpensive, readily available starting materials to yield solvents with appealing properties (negligible volatility, non-flammability and high solvation capacity). In the context of polymer science, DES systems not only offer an appealing route towards replacing hazardous volatile organic solvents (VOCs), but can serve multiple roles including those of solvent, monomer and templating agent-so called "polymerizable eutectics." In this review, we look at DES systems and polymerizable eutectics and their application in polymer materials synthesis, including various mechanisms of polymer formation, hydrogel design, porous monoliths, and molecularly imprinted polymers. We provide a comparative study of these systems alongside traditional synthetic approaches, highlighting not only the benefit of replacing VOCs from the perspective of environmental sustainability, but also the materials advantage with respect to mechanical and thermal properties of the polymers formed.

Rapid Additive Manufacturing of 3D Geometric Structures via Dual-Wavelength Polymerization.

A dual-wavelength photopolymerization process is presented, allowing for the volumetric fabrication of complex geometries using a multistep process. The methacrylate-based resin contained 0.1 wt % camphorquinone/0.1 wt % ethyl 4-(dimethylamino) benzoate and 0.2 wt % bis[2-(ochlorophenyl)-4,5-diphenylimidazole] as photoinitiator (473 nm) and photoinhibitor (365 nm), respectively. The photoinitiator and photoinhibitor concentrations were optimized to allow for photocuring to full depth (4.6 mm) following an exposure time of 2 min solely by 473 nm light, but no curing occurred when 365 nm light was present due to photoinhibition. This resin was validated using one-step volumetric fabrication of two objects containing voids defined by the 365 nm irradiation region. Two more complex structures were printed in a step-by-step manner, relying on the dynamic control of the projection patterns of both 365 and 473 nm projectors, decreasing the print time from 20 min using a commercially available single wavelength resin printer to 2 min.

Ambient-Temperature Waterborne Polymer/rGO Nanocomposite Films: Effect of rGO Distribution on Electrical Conductivity.

Electrically conductive polymer/rGO (reduced graphene oxide) films based on styrene and n-butyl acrylate are prepared by a variety of aqueous latex based routes involving ambient temperature film formation. Techniques based on miniemulsion polymerization using GO as surfactant and "physical mixing" approaches (i.e., mixing an aqueous polymer latex with an aqueous GO dispersion) are employed, followed by heat treatment of the films to convert GO to rGO. The distribution of GO sheets and the electrical conductivity depend strongly on the preparation method, with electrical conductivities in the range 9 × 10-4 to 3.4 × 102 S/m. Higher electrical conductivities are obtained using physical mixing compared to miniemulsion polymerization, which is attributed to the former providing a higher level of self-alignment of rGO into larger linear domains. The present results illustrate how the distribution of GO sheets within these hybrid materials can to some extent be controlled by judicious choice of preparation method, thereby providing an attractive means of nanoengineering for specific potential applications.

Enhanced Osteogenic Differentiation of Human Fetal Cartilage Rudiment Cells on Graphene Oxide-PLGA Hybrid Microparticles.

Poly(d,l-lactide-co-glycolide) (PLGA) has been extensively explored for bone regeneration applications; however, its clinical use is limited by low osteointegration. Therefore, approaches that incorporate osteoconductive molecules are of great interest. Graphene oxide (GO) is gaining popularity for biomedical applications due to its ability to bind biological molecules and present them for enhanced bioactivity. This study reports the preparation of PLGA microparticles via Pickering emulsification using GO as the sole surfactant, which resulted in hybrid microparticles in the size range of 1.1 to 2.4 µm based on the ratio of GO to PLGA in the reaction. Furthermore, this study demonstrated that the hybrid GO-PLGA microparticles were not cytotoxic to either primary human fetal cartilage rudiment cells or the human osteoblast-like cell line, Saos-2. Additionally, the GO-PLGA microparticles promoted the osteogenic differentiation of the human fetal cartilage rudiment cells in the absence of exogenous growth factors to a greater extent than PLGA alone. These findings demonstrate that GO-PLGA microparticles are cytocompatible, osteoinductive and have potential as substrates for bone tissue engineering.

Electrically conductive polymer/rGO nanocomposite films at ambient temperature via miniemulsion polymerization using GO as surfactant.

We have developed a facile and industrially scalable method to synthesize colloidally stable polymer nanoparticles decorated with graphene oxide (GO) sheets via miniemulsion polymerization, which in turn enables the preparation of electrically conductive films using a simple dropcasting method at ambient temperature. The resulting nanocomposite films exhibited high electrical conductivity with a wide range of potential applications as conductive coatings.

Estimation of Copolymer/Water Interfacial Tensions Using Pendant Drop Tensiometry.

Copolymer/water interfacial tensions of statistical copolymers of styrene/ n-butyl acrylate were estimated by pendant drop tensiometry using an "inverse" configuration according to which a drop of water was formed in toluene/copolymer solutions. The study first involved the precise measurement of copolymer solutions density using pycnometry. Subsequently, interfacial tensions of copolymer solutions against water were plotted as a function of copolymer concentration in toluene. Several methods were explored to fit the experimental data and obtain estimates of copolymer/water interfacial tensions at 100% copolymer concentration in toluene by extrapolation. The Belton-Evans extrapolation resulted in the best fit with the experimental data. When plotted as a function of the styrene composition of the copolymer, the interfacial tensions estimates followed an additivity relationship. This enabled estimation of the copolymer/water interfacial tensions directly from their respective homopolymer/water interfacial tensions values. These results are particularly useful for the prediction of composite particle morphology involving copolymerization of multiple monomers.

PEO-based brush-type amphiphilic macro-RAFT agents and their assembled polyHIPE monolithic structures for applications in separation science.

Polymerized High Internal Phase Emulsions (PolyHIPEs) were prepared using emulsion-templating, stabilized by an amphiphilic diblock copolymer prepared by reversible addition fragmentation chain transfer (RAFT) polymerization. The diblock copolymer consisted of a hydrophilic poly(ethylene glycol) methyl ether acrylate (PEO MA, average Mn 480) segment and a hydrophobic styrene segment, with a trithiocarbonate end-group. These diblock copolymers were the sole emulsifiers used in stabilizing "inverse" (oil-in-water) high internal phase emulsion templates, which upon polymerization resulted in a polyHIPE exhibiting a highly interconnected monolithic structure. The polyHIPEs were characterized by FTIR spectroscopy, BET surface area measurements, SEM, SEM-EDX, and TGA. These materials were subsequently investigated as stationary phase for high-performance liquid chromatography (HPLC) via in situ polymerization in a capillary format as a 'column housing'. Initial separation assessments in reversed-phase (RP) and hydrophilic interaction liquid chromatographic (HILIC) modes have shown that these polyHIPEs are decorated with different microenvironments amongst the voids or domains of the monolithic structure. Chromatographic results suggested the existence of RP/HILIC mixed mode with promising performance for the separation of small molecules.

Functional patterned coatings by thin polymer film dewetting.

An approach for the fabrication of functional polymer surface coatings is introduced, where micro-scale structure and surface functionality are obtained by means of self-assembly mechanisms. We illustrate two main applications of micro-patterned polymer surfaces obtained through dewetting of bilayers of thin polymer films. By tuning the physical and chemical properties of the polymer bilayers, micro-patterned surface coatings could be produced that have applications both for the selective attachment and patterning of proteins and cells, with potential applications as biomaterials, and for the collection of water from the atmosphere. In all cases, the aim is to achieve functional coatings using approaches that are simple to realize, use low cost materials and are potentially scalable.

Synthesis of polymeric nanoparticles containing reduced graphene oxide nanosheets stabilized by poly(ionic liquid) using miniemulsion polymerization.

Polymeric nanoparticles containing reduced graphene oxide (rGO) nanosheets have been prepared by aqueous miniemulsion radical polymerization of methyl methacrylate (MMA) utilizing poly(ionic liquid) (PIL) as stabilizer to effectively disperse the rGO nanosheets in the monomer phase. The PIL that gave the best results in terms of rGO dispersibility was a block copolymer of the ionic liquid monomer 1-(2-methacryloyloxyethyl)-3-butylimidazolium bis(trifluoromethanesulfonyl)amide ([Mbim][TFSA]) and MMA, the concept being that the MMA units impart solubility in the MMA monomer droplets whereas the IL units act as adsorption sites for rGO. The rGO dispersibility in vinyl monomer was demonstrated to be superior using the above PIL block copolymer compared to the corresponding statistical copolymer or PIL homopolymer. Overall, the approach developed demonstrates how PILs can be employed to conveniently switch (turn ON/OFF) the dispersibility of PIL/rGO via anion exchange reactions, which can be an efficient strategy for synthesis of polymer/rGO nanocomposite materials.