Suspended phospholipid bilayers: A new biological membrane mimetic.

HYPOTHESIS: The attractive interaction between a cationic surfactant monolayer at the air-water interface and vesicles, incorporating anionic lipids, is sufficient to drive the adsorption and deformation of the vesicles. Osmotic rupture of the vesicles produces a continuous lipid bilayer beneath the monolayer. EXPERIMENTAL: Specular neutron reflectivity has been measured from the surface of a purpose-built laminar flow trough, which allows for rapid adsorption of vesicles, the changes in salt concentration required for osmotic rupture of the adsorbed vesicles into a bilayer, and for neutron contrast variation of the sub-phase without disturbing the monolayer. FINDINGS: The neutron reflectivity profiles measured after vesicle addition are consistent with the adsorption and flattening of the vesicles beneath the monolayer. An increase in the buffer salt concentration results in further flattening and fusion of the adsorbed vesicles, which are ruptured by a subsequent decrease in the salt concentration. This process results in a continuous, high coverage, bilayer suspended 11 Åbeneath the monolayer. As the bilayer is not constrained by a solid substrate, this new mimetic is well-suited to studying the structure of lipid bilayers that include transmembrane proteins.

Evaporation of Concentrated Polymer Solutions Is Insensitive to Relative Humidity.

A recent theory suggests that the evaporation kinetics of macromolecular solutions is insensitive to the ambient relative humidity (RH) due to the formation of a "polarization layer" of solutes at the air-solution interface. We confirm this insensitivity up to RH≈80% in the evaporation of polyvinyl alcohol solutions from open-ended capillaries. To explain the observed drop in evaporation rate at higher RH, we need to invoke compressive stresses due to interfacial polymer gelation. Moreover, RH-insensitive evaporation sets in earlier than theory predicts, suggesting a further role for a gelled "skin." We discuss the relevance of these observations for respiratory virus transmission via aerosols.

Tracking the stochastic growth of bacterial populations in microfluidic droplets.

Bacterial growth in microfluidic droplets is relevant in biotechnology, in microbial ecology, and in understanding stochastic population dynamics in small populations. However, it has proved challenging to automate measurement of absolute bacterial numbers within droplets, forcing the use of proxy measures for population size. Here we present a microfluidic device and imaging protocol that allows high-resolution imaging of thousands of droplets, such that individual bacteria stay in the focal plane and can be counted automatically. Using this approach, we track the stochastic growth of hundreds of replicateEscherichia colipopulations within droplets. We find that, for early times, the statistics of the growth trajectories obey the predictions of the Bellman-Harris model, in which there is no inheritance of division time. Our approach should allow further testing of models for stochastic growth dynamics, as well as contributing to broader applications of droplet-based bacterial culture.

Soft matter science and the COVID-19 pandemic.

Much of the science underpinning the global response to the COVID-19 pandemic lies in the soft matter domain. Coronaviruses are composite particles with a core of nucleic acids complexed to proteins surrounded by a protein-studded lipid bilayer shell. A dominant route for transmission is via air-borne aerosols and droplets. Viral interaction with polymeric body fluids, particularly mucus, and cell membranes controls their infectivity, while their interaction with skin and artificial surfaces underpins cleaning and disinfection and the efficacy of masks and other personal protective equipment. The global response to COVID-19 has highlighted gaps in the soft matter knowledge base. We survey these gaps, especially as pertaining to the transmission of the disease, and suggest questions that can (and need to) be tackled, both in response to COVID-19 and to better prepare for future viral pandemics.

Neutron Reflectivity as a Tool for Physics-Based Studies of Model Bacterial Membranes.

The principles of neutron reflectivity and its application as a tool to provide structural information at the (sub-) molecular unit length scale from models for bacterial membranes are described. The model membranes can take the form of a monolayer for a single leaflet spread at the air/water interface, or bilayers of increasing complexity at the solid/liquid interface. Solid-supported bilayers constrain the bilayer to 2D but can be used to characterize interactions with antimicrobial peptides and benchmark high throughput lab-based techniques. Floating bilayers allow for membrane fluctuations, making the phase behaviour more representative of native membranes. Bilayers of varying levels of compositional accuracy can now be constructed, facilitating studies with aims that range from characterizing the fundamental physical interactions, through to the characterization of accurate mimetics for the inner and outer membranes of Gram-negative bacteria. Studies of the interactions of antimicrobial peptides with monolayer and bilayer models for the inner and outer membranes have revealed information about the molecular control of the outer membrane permeability, and the mode of interaction of antimicrobials with both inner and outer membranes.

Temperature- and pH-Dependent Shattering: Insoluble Fatty Ammonium Phosphate Films at Water-Oil Interfaces.

We study the films formed by tetradecylamine (TDA) at the water-dodecane interface in the presence of hydrogen phosphate ions. Using Fourier transform infrared spectroscopy (FTIR), interfacial shear rheology, confocal fluorescence microscopy, cryo-scanning electron microscopy (cryo-SEM), and small-angle neutron scattering (SANS), we find that between pH 5 and 8 tetradecylammonium cations bind to hydrogen phosphate anions to form needle-shaped crystallites of tetradecylammonium hydrogen phosphate (TAHP). These crystallites self-assemble into films with a range of morphologies; below pH 7, they form brittle, continuous sheets, and at pH 8, they form lace-like networks that deform plastically under shear. They are also temperature-responsive: when the system is heated, the film thins and its rheological moduli drop. We find that the temperature response is caused by dissolution of the film in to the bulk fluid phases. Finally, we show that these films can be used to stabilize temperature-responsive water-in-oil emulsions with potential applications in controlled release of active molecules.

Interactions of hyaluronan layers with similarly charged surfaces: the effect of divalent cations.

We used colloidal probe atomic force microscopy to measure the normal forces between the surface of a silica colloidal particle and a sparse layer of hyaluronan (hyaluronic acid, HA, MW ≈ 10(6) Da) covalently attached to a planar silica surface, both across pure water and following the addition of 1 mM MgCl2. It was found that in the absence of salt the HA layer repelled the colloidal silica surface during both approach and retraction. The addition of the MgCl2, however, changes the net force between the negatively charged HA layer and the opposing negatively charged silica surface from repulsion to adhesion. This interaction reversal is attributed to the bridging effect of the added Mg(2+) ions. Our results provide first direct force data to support earlier simulation and predictions that such divalent cations could bridge between negative charges on opposing surfaces, leading to an overall reversal of force from repulsion to attraction.

A neutron reflectivity study of surfactant self-assembly in weak polyelectrolyte brushes at the sapphire-water interface.

Poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes grown by surface-initiated polymerization from a polyanionic macroinitiator adsorbed at the sapphire-water interface have been used as a substrate to study the interaction between the weak polyelectrolyte PDMAEMA and the oppositely charged surfactant sodium dodecyl sulfate (SDS) with neutron reflectivity. At pH 3, multilayered structures are formed in which the interlayer separation (∼40 Å) is comparable to the dimensions of a SDS bilayer or micelle. The number of repeating layers that form depends on brush thickness, ranging from three layers in a relatively thin brush (5 nm dry thickness) to 15 layers in a relatively thick brush (17 nm dry thickness). In the 5 nm brush, addition of 0.01 mM SDS leads to brush deswelling, and the distinct layered structure only forms when the SDS concentration reaches 1 mM, with the brush reswelling slightly at 5 mM SDS. In the thicker (11 and 17 nm) brushes, distinct layered structures form at 0.1 mM SDS, in which the molar SDS/DMAEMA ratio is greater than unity. Exposing the 17 nm brush/SDS complex to 1 M NaNO(3) results in the complete removal of the surfactant and recovery of the bare brush structure. At pH 9, there is significant surfactant uptake by the brush, but no multilayer structures are formed. The brush presents a high concentration of DMAEMA segments that are localized to within 500-1000 Å of the sapphire interface. At pH 9 the high local concentration of hydrocarbon segments in the brush screens the hydrophobic tails of the surfactants from the unfavorable interaction with water, leading to significant surfactant uptake by the brush. At pH 3 the high local concentration of charges inside the brush additionally screens the repulsive interactions between the surfactant headgroups, making surfactant uptake even more favorable, leading to the formation of multilayered surfactant aggregates confined within the brush.

Neutron reflectivity study of the structure of pH-responsive polymer brushes grown from a macroinitiator at the sapphire-water interface.

Poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes have been grown by surface-initiated atom transfer radical polymerization (SI-ATRP) from a polyanionic macroinitiator adsorbed at the sapphire-water interface, and neutron reflectivity has been used to characterize the structures and pH response of the brushes. The polymer brushes are well-described by Gaussian density profiles with an additional thin, dense layer close to the solid-liquid interface for the thicker brushes at pH 7 and 9, which produces a spike in the density profile. The spike in the distribution accounts for less than 5% of the polymer and disappears as the brushes swell at pH 3. The observed swelling behavior has been used in combination with the predictions of scaling theory and previous experimental measurements to determine the grafted density of PDMAEMA chains.

Small angle neutron scattering study of polyelectrolyte brushes grafted to well-defined gold nanoparticle interfaces.

Small angle neutron scattering (SANS) has been used to study the conformations, and response to added salt, of a polyelectrolyte layer grafted to the interfaces of well-defined gold nanoparticles. The polyelectrolyte layer is prepared at a constant coverage by grafting thiol-functionalized polystyrene (M(w) = 53k) to gold nanoparticles of well-defined interfacial curvature (R(c) = 26.5 nm) followed by a soft-sulfonation of 38% of the segments to sodium polystyrene sulfonate (NaPSS). The SANS profiles can be fit by Fermi-Dirac distributions that are consistent with a Gaussian distribution but are better described by a parabolic distribution plus an exponential tail, particularly in the high salt regime. These distributions are consistent with the predictions and measurements for osmotic and salted brushes at interfaces of low curvature. When the concentration of added salt exceeds the concentration of counterions inside the brush, there is a salt-induced deswelling, but even at the highest salt concentration the brush remains significantly swollen due to a short-ranged excluded volume interaction. This is responsible for the observed resistance to aggregation of these comparatively high concentration polyelectrolyte stabilized gold nanoparticle dispersions even in the presence of a high concentration of added salt.

Direct measurement of normal and shear forces between surface-grown polyelectrolyte layers.

This paper presents measurements, using the surface force balance (SFB), of the normal and shear forces in aqueous solutions between polyelectrolyte layers grown directly on mica substrates (grafted-from). The grafting-from was via surface-initiated atom transfer radical polymerization (surface-initiated ATRP) using a positively charged methacrylate monomer. X-ray reflectometry measurements confirm the successful formation of polyelectrolyte layers by this method. Surface-inititated ATRP has the advantages that the polymer chains can be strongly grafted to the substrate, and that high grafting densities should be achievable. Measured normal forces in water showed a long-range repulsion arising from an electrical double layer that extended beyond the polyelectrolyte layers, and a stronger, shorter-range repulsion when the polyelectrolyte brushes were in contact. Swollen layer thicknesses were in the range 15-40 nm. Upon addition of approximately 10(-2)-10(-1) M sodium nitrate, screening effects reduced the electrical double layer force to an undetectable level. Shear force measurements in pure water were performed, and the measured friction may arise from polymer chains bridging between the surfaces.

Interaction of polymer and surfactant at the air-water interface: poly(2-(dimethylamino)ethyl methacrylate) and sodium dodecyl sulfate.

The interactions between the weak polyelectrolyte, poly(2-(dimethylamino) ethyl methacrylate) or PDMAEMA, and the anionic surfactant sodium dodecyl sulfate (SDS) at the air-water interface have been investigated at pH = 3 and 9 using a combination of neutron reflectivity and surface tension measurements. By using deuterated PDMAEMA in combination with h-SDS and d-SDS, we have been able to directly determine the distribution of both the polymer and the surfactant at the air-water interface. At pH = 3, the polyelectrolyte is positively charged while at pH = 9 it is essentially uncharged. The enhancement in the adsorption of SDS at low coverage suggests that surface active polymer surfactant complexes are forming and adsorbing at the interface. This leads to close to monolayer adsorption of SDS, suggesting that it is surfactant monomers that are complexing with polymers that are in extended conformations parallel to the surface. As the concentration of SDS in the mixtures changes so does the surfactant content of the complexes, which affects the surface activity and hence the coverage of the complexes. Multilayer structures are formed at SDS concentrations of 0.1 and 1 mM, for pH = 3 and 9, respectively.

Direct measurement of forces between cell-coating polymers and chiral crystal surfaces: the enantioselectivity of.

The interactions of hyaluronan (HA), a high-molecular-weight linear polysaccharide present in many pericellular coatings, with different facets of chiral calcium tartrate (CT) crystal surfaces are investigated using a molecular force probe. Forces between {011} and {110} facets of (R,R) and (S,S) CT crystals and a HA-bearing surface have been measured in saturated CT solutions. It has been observed that hyaluronan binds most strongly to the {011} facet of the (R,R) crystal, compared with the other facets examined, which is consistent with earlier observations of the adhesion of HA-coated cells to chiral CT crystals. The variation of binding strength among the facets studied is tentatively attributed to the surface structure difference between the {011} and {110} facets as well as to the preferential matching of the local hyaluronan H-bond network to the -OH groups on the {011} facet of the (R,R) enantiomer.

Boundary lubrication under water.

Boundary lubrication, in which the rubbing surfaces are coated with molecular monolayers, has been studied extensively for over half a century. Such monolayers generally consist of amphiphilic surfactants anchored by their polar headgroups; sliding occurs at the interface between the layers, greatly reducing friction and especially wear of the underlying substrates. This process, widespread in engineering applications, is also predicted to occur in biological lubrication via phospholipid films, though few systematic studies on friction between surfactant layers in aqueous environments have been carried out. Here we show that the frictional stress between two sliding surfaces bearing surfactant monolayers may decrease, when immersed in water, to as little as one per cent or less of its value in air (or oil). We attribute this to the shift of the slip plane from between the surfactant layers, to the surfactant/substrate interface. The low friction would then be due to the fluid hydration layers surrounding the polar head groups attached to the substrate. These results may have implications for future technological and biomedical applications.

Forces between mica surfaces, prepared in different ways, across aqueous and nonaqueous liquids confined to molecularly thin films.

We have measured normal and lateral interactions across a range of different liquids between mica surfaces using a surface force balance (SFB). The mica surfaces were prepared either by melt cutting using Pt wire and standard procedures in our laboratories or by tearing sheets (that had not been exposed to Pt) off from a freshly cleaved sheet of mica. AFM micrographs revealed the substantial absence of Pt nanoparticles on the melt cut and torn-off mica surfaces. Normal-force versus surface-separation (D) profiles and shear force versus D measurements for purified water (no added salt), for concentrated aqueous NaCl solutions, and for cyclohexane revealed that in all cases the behavior of the highly confined liquids between melt-cut and between torn-off mica sheets was identical within experimental scatter. These results demonstrate directly that interactions measured between melt-cut mica surfaces as routinely prepared using established procedures in our laboratories and in other laboratories are free of the effect of any Pt contamination.