Effect of infrared technology on the behavior of Listeria monocytogens, Salmonella spp. and Enterobacteriaceae in homogenized raw vaccine milk: preliminary results.

In the dairy industry, traditional heat treatments are known for their high water and energy consumption, and more economically and environmentally friendly solutions are being sought. Infrared (IR) technology offers advantages in energy efficiency and environmental sustainability; however, its effectiveness in milk processing, particularly in pathogen inactivation, remains relatively unexplored. In this study, homogenized raw milk was subjected to IR treatment, and its impact on Listeria monocytogenes, Salmonella spp., and Enterobacteriaceae was assessed. Results indicate that IR treatment effectively reduces the microbial load, achieving levels of inactivation comparable to conventional pasteurization methods (around 6 Log10 CFU/mL). Moreover, the treatment maintains milk pH levels, suggesting minimal alteration to its composition. Further research is needed to explore the full extent of IR treatment on milk sanitation efficacy, deeply exploring IR technology to fully assess its applicability and integration into dairy processing practices. Despite regulatory challenges, the Wir System Milk shows promise as a cost-effective and eco-friendly alternative for raw milk treatment.

Microbiological safety of dry-aged meat: a critical review of data gaps and research needs to define process hygiene and safety criteria.

Dry-aged meat is gaining popularity among food business operators and private consumers. The process is carried out in aerobic conditions by hanging beef carcasses or placing subprimal or primal cuts in a dedicated cabinet for several weeks or even months while controlling the environment through the management of process parameters such as temperature, relative humidity, and airflow. In this review, we present a critical evaluation of the literature to evaluate tools to manage the process to guarantee food safety and identify critical control points, as well as good hygiene and manufacturing practices. In controlled aging conditions, only Listeria monocytogenes and Yersinia enterocolitica can multiply, while a reduction in the number of Salmonella spp. and Escherichia coli O157:H7 is generally reported. Enterobacteriaceae usually decrease on the surface of the meat during maturation; thus, for the purpose of the hygiene evaluation of the production process, a count no higher than that of unmatured meat is expected. Besides, various studies report that the total bacterial count and the spoilage microorganisms significantly increase on the surface of the meat, up to 5-6 Log10 CFU/g in the absence of visible spoilage. Bacteria of the Pseudomonas genus tend to progressively replace other microorganisms during maturation; thus, the total mesophilic or psychrophilic bacterial load is not a good indicator of process hygiene for matured meat. Critical parameters for the control of the process are temperature, relative humidity, and ventilation, which should be monitored during the process. For this reason, equipment designed and certified for dry-aging must be used, and the manufacturer must validate the process. Food business operators must apply general good manufacturing practices (GMP) and good hygiene practices (GHP) for meat processing and some GMP and GHP specific for dry-aging. Several research needs were identified, among them the evolution of the populations of L. monocytogenes and Y. enterocolitica and the microbiology of the inner parts of the dry-aged meat.

Microbiological safety of dry-cured fish from the raw material to the end of processing.

The commercialization of processed fish products is rising in restaurants and small to medium enterprises. However, there is a lack of data related to the microbiological safety of such products. In this study total aerobic colony count and Enterobacteriaceae, as proxy of process hygiene criteria, and detection of Listeria monocytogenes and concentration of histamine, as food safety criteria, were investigated in Salmo salar (salmon), Xiphias gladius (swordfish) and Thunnus albacares (yellowfin tuna), before, during, and at the end of a dry-curing process, performed in a dedicated cabinet, at controlled temperature, relative humidity and ventilation, up to 240 h. The microbiological parameters were investigated in the tested fish products by culture methods and shotgun metagenomic, while the presence of histamine, and other biogenic amines, was quantified by High Performance Liquid Chromatography. In the raw material, and up to the end of the dry curing process, the concentration of Enterobacteriaceae was always lower than 10 CFU/g, while total aerobic colony counts ranged between 3.9 and 5.4 Log CFU/g in salmon; 5.5 and 5.9 Log CFU/g in swordfish; 4.4 and 4.8 Log CFU/g in tuna. The pH values were significantly different between fish species, in the raw materials and during processing except for T4, occurring 70 h after the start of the process for salmon and after 114 h for swordfish and tuna. Water activity was different at specific sampling points and at the end of processing. Overall, 79 % of the sequences identified in the tested fish samples were assigned to y bacteria. The most abundant phyla were Pseudomonadota, Bacillota and Mycoplasmatota. The microbial populations identified by shotgun metagenomic in the tested fish species clustered well separated one from the other. Moreover, the microbial richness was significantly higher in salmon and tuna in comparison to swordfish. Listeria monocytogenes was not detected in the raw material by using the reference cultural method and very few reads (relative abundance <0.007) were detected in swordfish and tuna by shotgun metagenomic. Histamine producing bacteria, belonging to the genera Vibrio, Morganella, Photobacterium and Klebsiella, were identified primarily in swordfish. However, histamine and other biogenic amines were not detected in any sample. To the best of our knowledge this is the first paper reporting time point determinations of microbiological quality and safety parameters in salmon, swordfish and tuna, before, during and at the end of a dry-curing process. The data collected in this paper can help to predict the risk profile of ready to eat dry-cured fish products during storage before consumption.

Reduction of the microbial load in meat maturation rooms with and without alkaline electrolyzed water fumigation.

Dry aging is a process during which meat is stored within maturation chambers at low temperatures and low relative humidity, resulting in improved tenderness and flavor development. The cuts are exposed to the atmosphere by hanging them or setting them on racks in the maturation chamber without any protective packaging. Animals and humans are usually the major sources of bacterial food contamination in the meat industry, but other routes might be involved. Therefore, procedures to reduce or eliminate pathogens from surfaces are crucial for an effective hazard analysis critical control point program in the food industry and other environments. This study aimed to assess the survival of Listeria monocytogenes, Escherichia coli, Salmonella spp., and Staphylococcus aureus on the inner surface of dry aging chambers. Moreover, we tested the efficacy of alkaline electrolyzed water (REW) for its application within a procedure aimed at reducing foodborne pathogens during meat storage. Environmental conditions inside the dry aging cabinet determine a reduction of circa 3 log CFU/cm2 of the considered microorganisms on the inner surface in 24 hours. Additionally, the nebulization of REW with the smoking system increased the count reduction in 24 hours due to environmental conditions for L. monocytogenes (~1 log CFU/cm2) and for S. aureus (~2 log CFU/cm2). In this context, the use of REW can be justified for routine cleaning procedures of the surfaces, with the added value of being safe to handle, not containing environmental pollutants, and making it unnecessary to rinse surfaces due to its instability.

From industrial to digital citizenship: rethinking social rights in cyberspace.

Growing social inequalities represent a major concern associated with the Digital Revolution. The article tackles this issue by exploring how welfare regulations and redistribution policies can be rethought in the age of digital capitalism. It focuses on the history and enduring crisis of social citizenship rights in their connection with technological changes, in order to draw a comparison between the industrial and the digital scenario. The first section addresses the link between the Industrial Revolution and the genesis of social rights. It describes the latter as a legal 'machine' designed to offset the imbalances produced by the technological movement of industrialization. The second and third sections introduce the notion of 'industrial citizenship' to describe the architecture of social rights in mature industrial societies and to contend that European systems of welfare are still largely modeled on an industrial standard. The fourth part investigates the impact of the Digital Revolution on this model of social citizenship. It identifies debates on basic income as a major trajectory for redesigning welfare regulations in a post-industrial era, and the digital user as a crucial emerging subject of rights. The final part explores how digital users could be entitled to social rights as data suppliers. To this end, it introduces the idea of 'digital-social rights' resulting from the incorporation of welfare and redistribution principles into emerging digital rights. Hence, it proposes a legal-political framework for the redistribution of the revenues generated by data in the form of a 'digital basic income' for citizens of cyberspace.

Morphological study of equine amniotic compartment.

Exfoliative cytology of human amniotic fluid (AF) has been extensively studied since 1940s, but no data exist in equine species. The AF compartment represents the environment in which the foetus grows and matures, and its composition changes, reflecting foetal well-being and development. The aim of this study was to describe for the first time the morphology of equine AF cells and amniotic membrane (AM) with light microscopy (LM) and transmission electron microscopy (TEM). AF was collected at parturition within 5 min after the appearance of the AM with a 60 mL syringe from 34 mares and samples of AM were collected from a subset of 7 mares with normal pregnancy hospitalized for attended parturition. For LM observation, a sample of cytocentrifuged fresh AF was stained with May-Grünwald Giemsa and AM sections were stained with H-E. For TEM observation, AF and AM were fixed, embedded in epoxy resins, then sectioned and stained with uranyl acetate and lead citrate solutions. Nucleated and anucleated squamous cells with basophilic cytoplasm, intensely basophilic cornified cells, polymorphonuclear cells, and clusters of eosinophilic amorphous substance were observed. Cells presumably derived from tracheal epithelium and small round nucleated cells with eosinophilic cytoplasm presumably derived from amniotic or urinary epithelium were occasionally found. Lamellar body-like structures (LBs) were present in some epithelial cells. In AM, epithelial, basal and mesenchymal layers were clearly visible with both techniques as previously described. Epithelial cells had several cytoplasmic vacuolization and microvilli were present on apical surface. The connective tissue presented fibroblasts, mesenchymal and rare polymorphonuclear cells, surrounded by abundant extracellular matrix, with distribution of collagen fibres. This is the first report about equine amniotic compartment description by LM and TEM. As recently reported in human medicine, the AM could be a second potential source of pulmonary surfactant, given the finding of LBs inside the cells which could have the same function as in humans. Further studies in samples collected at different gestational ages could increase the knowledge of AF cells and their modification during pregnancy, as well as a better comprehension of the role of AM as a secondary source of pulmonary surfactant in the horse. The diagnostic evaluation of AF cellular composition in high-risk pregnancies may also be investigated.

Effectiveness of alkaline electrolyzed water in reducing bacterial load on surfaces intended to come into contact with food.

Alkaline electrolyzed water (REW) is known for its cleaning action. The aim of this work was to assess REW effectiveness in reducing microbial load on surfaces intended for contact with food. Stainlesssteel surfaces were experimentally contaminated, bacterial inactivation was tested before and after treatment with REW. Treatment with REW was operated spraying it on the contaminated plates until drying. Tests were conducted for Salmonella spp., Listeria spp., Staphylococcus aureus and Escherichia coli. The treatment revealed different degrees of sanitizing activity of REW on different bacterial species, with higher efficacy on E. coli and Salmonella spp. than S. aureus, Listeria spp.. Statistical analysis revealed a significant microbial load reduction (p<0.01) after treatment with REW, suggesting that it has a good disinfectant activity which, along with its easy and safe use, makes it a good alternative to many other more widely used disinfectants.

Assessment of the Impact on Human Health of the Presence of Norovirus in Bivalve Molluscs: What Data Do We Miss?

In the latest One Health ECDC EFSA technical report, Norovirus in fish and fishery products have been listed as the agent/food pair causing the highest number of strong-evidence outbreaks in the EU in 2019. This review aims to identify data gaps that must be filled in order to increase knowledge on Norovirus in bivalve molluscs, perform a risk assessment and rank the key mitigation strategies for this biological hazard, which is relevant to public health. Virologic determinations are not included in any of the food safety and process hygiene microbiologic criteria reflected in the current European regulations. In addition, the Escherichia coli-based indices of acceptable faecal contamination for primary production, as well as the food safety criteria, do not appear sufficient to indicate the extent of Norovirus contamination. The qualitative risk assessment data collected in this review suggests that bivalve molluscs present a high risk to human health for Norovirus only when consumed raw or when insufficiently cooked. On the contrary, the risk can be considered negligible when they are cooked at a high temperature, while information is still scarce for non-thermal treatments.

Modeling the behavior of Listeria innocua in Italian salami during the production and high-pressure validation of processes for exportation to the U.S.

A model describing Listeria innocua evolution according to process parameters of 51 Italian salami processes and HPP in 31 companies was developed. A total of 51 challenge tests were performed. During processing a L. innocua reduction of 0.34-4.32 Log10 CFU/g was observed and HPP further reduced the count of 0.48-3.47 Log10 CFU/g; an overall reduction of 1.04-5.68 is reached. PH after acidification/drying process, aw after seasoning, duration of the seasoning and caliber resulted associated (p < 0.05) with L. innocua decrease. HPP efficacy was associated (p < 0.05) with aw and pH of the product: higher the pH and aw after the acidification/drying and seasoning phases, higher resulted the L. innocua reduction after HPP. No significant association was observed between L.innocua and salt, nitrate and starter content and other characteristics of process. The model meets companies and Authorities needs and represents a useful tool to predict L. monocytogenes lethality, giving recommendations to food business operators interested in exportation to the U.S.

Effect of production process and high-pressure processing on viability of Salmonella spp. in traditional Italian dry-cured coppa.

The aim of the study was to investigate the combined effect of the manufacturing process followed by HPP treatment on the inactivation of Salmonella spp. in artificially contaminated coppa samples, in order to verify the ability of the combined processes to achieve the objective of a 5-log reduction of Salmonella spp. needed for exportation to the U.S. Fresh anatomical cuts intended for coppa production were supplied by four different delicatessen factories located in Northern Italy. Raw meat underwent experimental contamination with Salmonella spp. using a mixture of 3 strains. Surface contamination of the fresh anatomical cuts was carried out by immersion into inoculum containing Salmonella spp. The conditions of the HPP treatment were: pressure 593 MPa, time 290 seconds, water treatment temperature 14°C. Surface and deep samples were performed post contamination (T0), end of the cold phase (T1), end of process (Tend), and after HPP treatment (postHPP) and Salmonella spp. Enumerated. The results of this study show a significant reduction of Salmonella spp. all through the production process (P<0.01) for all companies, followed by an additional reduction of bacterial counts due to HPP treatment (P<0.01), both in superficial and deep contaminations (P<0.01). The superficial overall reduction resulted of 1.58 to 5.04 log CFU/g during the production process. HPP treatment resulted in a significant (P<0.01) superficial and deep decrease in Salmonella spp. enumeration varying from 0.61 to 4.01 log and from 1.49 to 4.13 log. According to the data presented in this study, only the combined approach of coppa manufacturing process followed by HPP treatment always led to a 5-log reduction of Salmonella spp. required by USDA/FSIS guidelines.

Effect of production process and high-pressure processing on viability of Listeria innocua in traditional Italian dry-cured coppa.

In this study the effect of the application of High Pressure Treatment (HPP) combined with four different manufacturing processes on the inactivation of Listeria innocua, used as a surrogate for L. monocytogenes, in artificially contaminated coppa samples was evaluated in order to verify the most suitable strategy to meet the Listeria inactivation requirements needed for the exportation of dry-cured meat in the U.S. Fresh anatomical cuts intended for coppa production were supplied by four different delicatessen factories located in Northern Italy. Raw meat underwent experimental contamination with Listeria innocua using a mixture of 5 strains. Surface contamination of the fresh anatomical cuts was carried out by immersion into inoculum containing Listeria spp. The conditions of the HPP treatment were: pressure 593 MPa, time 290 seconds, water treatment temperature 14°C. Listeria innocua was enumerated on surface and deep samples post contamination, resting, ripening and HPP treatment. The results of this study show how the reduction of the microbial load on coppa during the production process did not vary among three companies (P>0.05) ranging from 3.73 to 4.30 log CFU/g, while it was significantly different (P<0.01) for the fourth company (0.92 log CFU/g). HPP treatment resulted in a significant (P<0.01) deep decrease of L. innocua count with values ranging between 1.63-3.54 log CFU/g with no significant differences between companies. Regarding superficial contamination, HPP treatment resulted significant (P<0.01) only in Coppa produced by two companies. The results highlight that there were processes less effective to inhibit the pathogen; in particular for company D an increase of L. innocua count was shown during processing and HPP alone cannot be able to in reaching the Listeria inactivation requirements needed for exportation of dry-cured meat in the U.S. According to the data reported in this paper, HPP treatment increases the ability of the manufacturing process of coppa in reducing Listeria count with the objective of a lethality treatment.