RESUMEN
High reliability and wide color gamut light-emitting diodes (LEDs) that use composite quantum dot films (CQDFs) protected by chip-scale package (CSP) structures are presented. CQDFs containing CdZnSeS/ZnS core-shell QDs and the K2SiF6:Mn4+ phosphors were mixed with silicone gel and used as color converters in the CSP QD-LEDs. The CSP QD-LEDs, used for backlight displays, transmitted through a color filter and exhibited ITU-R Recommendation BT.2020 of approximately 86% (a National Television System Committee value of 115%). Furthermore, we performed a long-term reliability analysis test on the CSP QD-LEDs for 2352 h to verify whether the optical performance of CSP QD-LEDs does not significantly degrade relative to that of a conventional plastic leaded chip carrier QD-LEDs. We implemented a highly reliable package technology that can protect the QDs, solve the moisture/oxygen problems in defective QD-LEDs, and produce a backlight source for display with a wide color gamut.
RESUMEN
All-inorganic CsPbX3 (X=I, Br, Cl) perovskite quantum dots (PQDs) have been investigated because of their optical properties, such as tunable wavelength, narrow band, and high quantum efficiency. These features have been used in light emitting diode (LED) devices. LED on-chip fabrication uses mixed green and red quantum dots with silicone gel. However, the ion-exchange effect widens the narrow emission spectrum. Quantum dots cannot be mixed because of anion exchange. We address this issue with a mesoporous PQD nanocomposite that can prevent ion exchange and increase stability. We mixed green quantum-dot-containing mesoporous silica nanocomposites with red PQDs, which can prevent the anion-exchange effect and increase thermal and photo stability. We applied the new PQD-based LEDs for backlight displays. We also used PQDs in an on-chip LED device. Our white LED device for backlight display passed through a color filter with an NTSC value of 113 % and Rec. 2020 of 85 %.
RESUMEN
The reaction of benzophenone imine complex (NH[double bond, length as m-dash]CPh(2))[Ru]Cl {[Ru] = Tp(PPh(3))Ru; Tp = HB(pz)(3), pz = pyrazolyl} with HC[triple bond, length as m-dash]CPh in the presence of H(2)O afforded the cis-alkynyl(vinylidene) complex [Ru](C[triple bond, length as m-dash]CPh)([double bond, length as m-dash]C[double bond, length as m-dash]CHPh) , as well as two alkenyl ketone regioisomers [Ru]C(CH(2)Ph)[double bond, length as m-dash]CHC(O)Ph and [Ru]C(Ph)[double bond, length as m-dash]CHC(O)CH(2)Ph . The combination of insertion and hydration process resulted in the unprecedented formation of the alkenyl ketone complexes.
RESUMEN
The reaction of [Ru(C(9)H(10)BN(6))Cl(C(18)H(15)P)(2)] with benzo-nitrile leads to crystals of the title compound, [Ru(C(9)H(10)BN(6))Cl(C(18)H(15)P)(C(7)H(5)N)]·C(2)H(5)OH. In the crystal structure, the environment about the ruthenium metal center corresponds to a slightly distorted octa-hedron with an average N-Ru-N bite angle of the Tp ligand of 86.6â (2)°.
RESUMEN
The author list in the paper by Tong, Hung, Wang, Lin & Lo [Acta Cryst. (2009), E65, m438] is corrected.[This corrects the article DOI: 10.1107/S1600536809010265.].
RESUMEN
Reaction of [Ru(Tp)Cl(PPh(3))(2)] {where Tp is hydridotri-pyrazol-yl-borate, BH[C(3)H(3)N(2))(3))]} with NH(4)[S(2)P(OEt)(2)] in methanol afforded the title compound, [Ru(C(9)H(10)BN(6))(C(4)H(10)O(2)PS(2))(C(18)H(15)P)], in which the Ru(II) ion is in a slightly disorted octa-hedral coordination environment. The [S(2)P(OEt)(2)](-) ligand coordinates in a chelating mode with two similar Ru-S bond lengths and a slightly acute S-Ru-S angle. The atoms of both -OCH(2)CH(3) groups of the diethyl dithio-phosphate ligand are disordered over two sites with approximate occupancies of 0.76 and 0.24.
RESUMEN
The reaction of RuCl(Tp)(Ph(3)P)(2), where Tp is [(CH)(3)N(2)](3)BH, with benzophenone imine leads to the formation of the title compound, [Ru(C(9)H(10)BN(6))Cl(C(13)H(11)N)(C(18)H(15)P)]·C(4)H(10)O. The environment about the Ru atom corresponds to a slightly distorted octa-hedron and the bite angle of the Tp ligand produces an average N-Ru-N angle of 86.3â (9)°. The three Ru-N(Tp) bond lengths [2.117â (2), 2.079â (2) and 2.084â (2)â Å] are slightly longer than the average distance (2.038â Å) in other ruthenium-Tp complexes.
RESUMEN
The reaction of [RuCl(C(9)H(10)BN(6))(C(18)H(15)P)(2)] with benzo-phenone imine in methanol, in the presence of sodium azide, leads to the formation of the title compound, [Ru(C(9)H(10)BN(6))(N(3))(HN=CPh(2))(C(18)H(15)P)]·C(4)H(10)O, which crystallizes as the diethyl ether solvate. In the crystal structure, the Ru atom is coordinated by three N atoms of one hydridotris(pyrazoly)borate anion, one P atom of one triphenyl-phosphine ligand, one N atom of the azide anion and one N atom of the benzophenone-imine ligand in a slightly distorted octa-hedral geometry. The azide anion is almost linear [177.0â (5)°], with an Ru-N-N angle of 125.9â (3)°. There is a small difference between the N-N distances [1.200â (5) and 1.164â (5)â Å], the longer bond being adjacent to the Ru atom.
RESUMEN
Reaction of [Ru(Tp)Cl(PPh(3))(2)] (Tp = hydridotrispyrazolyl-borate) with ammonium dithio-benzoate in methanol leads to the formation of the title compound, [Ru(C(9)H(10)BN(6))(C(7)H(5)S(2))(C(18)H(15)P)]. In the crystal structure, the Ru atom is coordinated by three N atoms of the Tp ligand, one P atom of the triphenyl-phosphine ligand and the two S atoms of the dithio-benzoate ligand within a slightly distorted octa-hedron. The Ru-S bonds are slightly different [2.321â (1) and 2.396â (1)â Å] and the average N-Ru-N angle is 86.31°.
RESUMEN
In the title compound, C(15)H(12)S(4), two phenyl-dithio-carboxyl-ate units are linked through a methyl-ene C atom on a twofold rotation axis. The central S-CH(2)-S angle of 116.9â (5)° is significantly larger than the ideal tetra-hedral value. The dihedral angle formed by the two phenyl rings is 68.2â (1)°. The refined Flack parameter of 0.2â (3) does not permit unambiguous determination of the absolute structure.