RESUMEN
In the face of a global pandemic, such as that caused by the SARS-CoV-2 virus, the prevention of new infections is essential to stop the spread and ultimately return to normality. In addition to wearing masks and maintaining safe distances, regular ventilation in enclosed spaces where several people are gathered has proven to be an effective protective measure as advised by the World Health Organization. Additionally, as has been shown in a recent study of other airborne viruses, there is a strong correlation between the CO2level and aerosol content in a confined space under the assumption humans are the only CO2source. This can be exploited by means of a low-cost infrared CO2sensor to indirectly monitor the aerosol content and to provide targeted ventilation if predefined thresholds are exceeded. The distributed CO2monitoring network presented in this paper extends that idea and provides an inexpensive, comprehensive and modular monitoring network based on readily available components and 3D printing. By using a long-range communication link (LoRa) to centrally collect the real-time CO2concentration in a multitude of rooms, this network is particularly suitable for larger building complexes such as kindergartens, schools and universities without requiring partial or even full WLAN coverage.
RESUMEN
Optical breadboards with honeycomb structure provide a solid surface with mounting hole grids for building optical assemblies, sub-systems and experiments in the fields of quantum-optics and photonics. Performance criteria are the ability to resist bending under load (stiffness) and the ability to dissipate induced vibrations to the board (damping). The hardware presented in this paper deals with the possibility of assembling optical breadboards using 3D-printed building bricks with honeycomb structure, so-called 'breadboard bricks', and industrial aluminum extrusions, so-called 'breadboard profiles'. With this do-it-yourself approach, it is possible to make changes to the breadboard, such as making an opening, changing its shape or increasing the mounting surface whenever needed. Furthermore, the breadboard is automatically compatible with industrially relevant mechanical design platforms. Aluminum extrusions and the PLA thermoplastic filament provide mechanical stiffness and damping, respectively. Further characteristics are low costs and a modular design. All this makes it especially suited for agile prototyping of (laser) optical assemblies in many engineering processes.
RESUMEN
Laser-based inspection of trivalent chromium conversion coatings on rough, cold-rolled aluminium substrates is studied from a basic physics perspective by means of angle and wavelength dependent measurements. As a result, we show that the correlation between the scattered laser light and the coating weight of the conversion layer is dominated by the phenomenon of interference. The combined experimental and numerical approach of our study is based on an appropriate layer model which was developed from a set of reference measurements of confocal microscopy, electron microscopy and X-ray photoelectron spectroscopy. The aluminium alloy AA3003 with a trivalent chromium conversion coating serves as an example. Our derived model is capable to reconstruct the reflectance of a laser beam at grazing incidence even for a pronounced surface roughness of R q ≈ 300 n m , for different coating thicknesses less than 70 n m corresponding to coating weights between zero and 0.5 g / m 2 and for laser wavelengths from 405 n m to 785 n m . In our discussion we outline the possibility to transfer the results to other aluminium alloys and/or other metallic substrates, as well as their potential for industrial applications such as 100% inline-capability, costs, velocity and ruggedness.