RESUMEN
Precipitation during the viral inactivation, neutralization and depth filtration step of a monoclonal antibody (mAb) purification process can provide quantifiable and potentially significant impurity reduction. However, robust commercial implementation of this unit operation is limited due to the lack of a representative scale-down model to characterize the removal of impurities. The objective of this work is to compare isoelectric impurity precipitation behavior for a monoclonal antibody product across scales, from benchtop to pilot manufacturing. Scaling parameters such as agitation and vessel geometry were investigated, with the precipitate amount and particle size distribution (PSD) characterized via turbidity and flow imaging microscopy. Qualitative analysis of the data shows that maintaining a consistent energy dissipation rate (EDR) could be used for approximate scaling of vessel geometry and agitator speeds in the absence of more detailed simulation. For a more rigorous approach, however, agitation was simulated via computational fluid dynamics (CFD) and these results were applied alongside a population balance model to simulate the trajectory of the size distribution of precipitate. CFD results were analyzed within a framework of a two-compartment mixing model comprising regions of high- and low-energy agitation, with material exchange between the two. Rate terms accounting for particle formation, growth and breakage within each region were defined, accounting for dependence on turbulence. This bifurcated model was successful in capturing the variability in particle sizes over time across scales. Such an approach enhances the mechanistic understanding of impurity precipitation and provides additional tools for model-assisted prediction for process scaling.
Asunto(s)
Anticuerpos Monoclonales , Precipitación Química , Hidrodinámica , Tamaño de la Partícula , Anticuerpos Monoclonales/química , Anticuerpos Monoclonales/aislamiento & purificaciónRESUMEN
Protein A chromatography is an enabling technology in current manufacturing processes of monoclonal antibodies (mAbs) and mAb derivatives, largely due to its ability to reduce the levels of process-related impurities by several orders of magnitude. Despite its widespread application, the use of mathematical modeling capable of accurately predicting the full protein A chromatographic process, including loading, post-loading wash and elution stages, has been limited. This work describes a mechanistic modeling approach utilizing the general rate model (GRM), the capabilities of which are explored and optimized using two isotherm models. Isotherm parameters were estimated by inverse-fitting simulated breakthrough curves to experimental data at various pH values. The parameter values so obtained were interpolated across the relevant pH range using a best-fit curve, thus enabling their use in predictive modeling, including of elution over a range of pH. The model provides accurate predictions (< 3% mean error in 10% dynamic binding capacity predictions and â¼ 5% mean error in elution mass and pool volume predictions, both on scale-up) for various residence times, buffer conditions and elution schemes and its effectiveness for use in scale-up and process development is shown by applying the same parameters to larger columns and a wider range of residence times.
Asunto(s)
Cromatografía , Proteína Estafilocócica A , Proteína Estafilocócica A/química , Modelos Teóricos , Anticuerpos Monoclonales/química , Cromatografía por Intercambio Iónico/métodosRESUMEN
Protein A chromatography is a workhorse in monoclonal antibody (mAb) manufacture since it provides effective separation of mAbs from impurities such as host-cell proteins (HCPs) in a single capture step. HCP clearance can be aided by the inclusion of a wash step prior to low-pH elution. Although high-pH washes can be effective in removing additional HCPs from the loaded column, they may also contribute to a reduced mAb yield. In this work we show that this yield loss is reflected in a pH-dependent variation of the equilibrium binding capacity of the protein A resin, which is also observed for the capacity of the Fc fragments alone and therefore not a result of steric interactions involving the Fab fragments in the intact mAbs. We therefore hypothesized that the high-pH wash loss was due to protonation or deprotonation of ionizable residues on the protein A ligand. To evaluate this, we applied a rational protein engineering approach to the Z domain (the Fc-binding component of most commercial protein A ligands) and expressed engineered mutants in E. coli. Biolayer interferometry and affinity chromatography experiments showed that some of the Z domain mutants were able to mitigate wash loss at high pH while maintaining similar binding characteristics at neutral pH. These experiments enabled elucidation of the roles of specific interactions in the Z domain - Fc complex, but more importantly offer a route to ameliorating the disadvantages of high-pH washes in protein A chromatography.
Asunto(s)
Escherichia coli , Proteína Estafilocócica A , Cricetinae , Animales , Proteína Estafilocócica A/química , Ligandos , Escherichia coli/metabolismo , Cricetulus , Células CHO , Anticuerpos Monoclonales/química , Cromatografía de Afinidad/métodos , Concentración de Iones de HidrógenoRESUMEN
Flow-through ion-exchange chromatography is frequently used in polishing biotherapeutics, but the factors that contribute to impurity persistence are incompletely understood. A large number of dilute impurities may be encountered that exhibit physicochemical diversity, making the flow-through separation performance highly sensitive to process conditions. The analysis presented in this work develops two novel correlations that offer transferable insights into the chromatographic behavior of weakly adsorbing impurities. The first, based on column simulations and validated experimentally, delineates the relative contributions of thermodynamic, transport, and geometric properties in dictating the initial breakthrough volumes of dilute species. The Graetz number for mass transfer was found to generalize the transport contributions, enabling estimation of a threshold in the equilibrium constant below which impurity persistence is expected. Impurity adsorption equilibria are needed to use this correlation, but such data are not typically available. The second relationship presented in this work may be used to reduce the experimental burden of estimating adsorption equilibria as a function of ionic strength. A correlation between stoichiometric displacement model parameters was found by consolidating isocratic retention data for over 200 protein-pH-resin combinations from the extant literature. Coupled with Yamamoto's analysis of linear gradient elution data, this correlation may be used to estimate retentivity approximately from a single experimental measurement, which could prove useful in predicting host-cell protein chromatographic behavior.
Asunto(s)
Proteínas , Adsorción , Cromatografía por Intercambio Iónico , Concentración Osmolar , TermodinámicaRESUMEN
Depth filtration is a commonly-used bioprocessing unit operation for harvest clarification that reduces the levels of process- and product-related impurities such as cell debris, host-cell proteins, nucleic acids and protein aggregates. Since depth filters comprise multiple components, different functionalities may contribute to such retention, making the mechanisms by which different impurities are removed difficult to decouple. Here we probe the mechanisms by which double-stranded DNA (dsDNA) is retained on depth filter media by visualizing the distribution of fluorescently-labeled retained DNA on spent depth filter discs using confocal fluorescence microscopy. The extent of DNA displacement into the depth filter was found to increase with decreasing DNA length with increasing operational parameters such as wash volume and buffer ionic strength. Finally, using 5ethynyl-2'-deoxyuridine (EdU) to label DNA in dividing CHO cells, we showed that Chinese hamster ovary (CHO) cellular DNA in the lysate supernatant migrates deeper into the depth filter than the lysate re-suspended pellet, elucidating the role of the size of the DNA in its form as an impurity. Apart from aiding DNA purification and removal, our experimental approaches and findings can be leveraged in studying the transport and retention of nucleic acids and other impurities on depth filters at a small scale.
RESUMEN
Protein precipitates that arise during bioprocessing can cause manufacturing challenges, but they can also aid in clearance of host-cell protein (HCP) and DNA impurities. Such precipitates differ from many protein precipitates that have been studied previously in their heterogeneous composition, particularly in the presence of high concentrations of the product protein. Here, we characterize the precipitates that form after neutralization of protein A purified and viral-inactivated material of an Fc-fusion protein produced in Chinese hamster ovary cells. The physical growth of precipitate particles was observed by optical microscopy, transmission electron microscopy, dynamic light scattering, and small-angle and ultra-small-angle X-ray scattering to characterize the precipitate microstructure and growth mechanism. The precipitate microstructure is well-described as a mass fractal with fractal dimension approximately 2. The growth is governed by a diffusion-limited aggregation mechanism as indicated by a power-law dependence on time of the size of the principal precipitate particles. Optical microscopy shows that these primary particles can further aggregate into larger particles in a manner that appears to be promoted by mixing. Absorbance experiments at varying pH and salt concentrations reveal that the growth is largely driven by attractive electrostatic interactions, as growth is hindered by an increase in ionic strength. The solution conditions that resulted in the most significant particle growth are also correlated with the greatest removal of soluble impurities (DNA and HCPs). Proteomic analysis of the precipitates allows identification of O ( 100 ) unique HCP impurities, depending on the buffer species (acetate or citrate) used for the viral inactivation. Most of these proteins have pI values near the precipitation pH, supporting the likely importance of electrostatic interactions in driving precipitate formation.
Asunto(s)
Precipitación Fraccionada , Fragmentos Fc de Inmunoglobulinas , Modelos Químicos , Proteómica , Proteínas Recombinantes de Fusión , Animales , Células CHO , Cricetinae , Cricetulus , Fragmentos Fc de Inmunoglobulinas/biosíntesis , Fragmentos Fc de Inmunoglobulinas/química , Fragmentos Fc de Inmunoglobulinas/aislamiento & purificación , Proteínas Recombinantes de Fusión/química , Proteínas Recombinantes de Fusión/aislamiento & purificaciónRESUMEN
Affinity precipitation using Z-elastin-like polypeptide-functionalized E2 protein nanocages has been shown to be a promising alternative to Protein A chromatography for monoclonal antibody (mAb) purification. We have previously described a high-yielding, affinity precipitation process capable of rapidly capturing mAbs from cell culture through spontaneous, multivalent crosslinking into large aggregates. To challenge the capabilities of this technology, nanocage affinity precipitation was investigated using four industrial mAbs (mAbs A-D) and one Fc fusion protein (Fc A) with diverse molecular properties. A molar binding ratio of 3:1 Z:mAb was sufficient to precipitate >95% mAb in solution for all molecules evaluated at ambient temperature without added salt. The effect of solution pH on aggregation kinetics was studied using a simplified two-step model to investigate the protein interactions that occur during mAb-nanocage crosslinking and to determine the optimal solution pH for precipitation. After centrifugation, the pelleted mAb-nanocage complex remained insoluble and was capable of being washed at pH ≥ 5 and eluted with at pH < 4 with >90% mAb recovery for all molecules. The four mAbs and one Fc fusion were purified from cell culture using optimal process conditions, and >94% yield and >97% monomer content were obtained. mAb A-D purification resulted in a 99.9% reduction in host cell protein and >99.99% reduction in DNA from the cell culture fluids. Nanocage affinity precipitation was equivalent to or exceeded expected Protein A chromatography performance. This study highlights the benefits of nanoparticle crosslinking for enhanced affinity capture and presents a robust platform that can be applied to any target mAb or Fc-containing proteins with minimal optimization of process parameters.
Asunto(s)
Anticuerpos Monoclonales/aislamiento & purificación , Precipitación Química , Medios de Cultivo/química , Fragmentos Fc de Inmunoglobulinas/aislamiento & purificación , Proteínas Recombinantes de Fusión/aislamiento & purificación , Tecnología Farmacéutica/métodos , Anticuerpos Monoclonales/química , Biotecnología/métodos , Técnicas de Cultivo de Célula/métodos , Elastina/metabolismo , Concentración de Iones de Hidrógeno , Fragmentos Fc de Inmunoglobulinas/química , Nanoestructuras , Proteínas Recombinantes de Fusión/químicaRESUMEN
Depth filtration is widely used in downstream bioprocessing to remove particulate contaminants via depth straining and is therefore applied to harvest clarification and other processing steps. However, depth filtration also removes proteins via adsorption, which can contribute variously to impurity clearance and to reduction in product yield. The adsorption may occur on the different components of the depth filter, that is, filter aid, binder, and cellulose filter. We measured adsorption of several model proteins and therapeutic proteins onto filter aids, cellulose, and commercial depth filters at pH 5-8 and ionic strengths <50 mM and correlated the adsorption data to bulk measured properties such as surface area, morphology, surface charge density, and composition. We also explored the role of each depth filter component in the adsorption of proteins with different net charges, using confocal microscopy. Our findings show that a complete depth filter's maximum adsorptive capacity for proteins can be estimated by its protein monolayer coverage values, which are of order mg/m2 , depending on the protein size. Furthermore, the extent of adsorption of different proteins appears to depend on the nature of the resin binder and its extent of coating over the depth filter surface, particularly in masking the cation-exchanger-like capacity of the siliceous filter aids. In addition to guiding improved depth filter selection, the findings can be leveraged in inspiring a more intentional selection of components and design of depth filter construction for particular impurity removal targets.
Asunto(s)
Adsorción , Productos Biológicos/química , Productos Biológicos/aislamiento & purificación , Biotecnología/métodos , Filtración/métodos , Proteínas/química , Proteínas/aislamiento & purificación , Concentración de Iones de HidrógenoRESUMEN
Protein A chromatography has been identified as a potential bottleneck in the monoclonal antibody production platform, leading to increased interest in non-chromatographic capture technologies. Affinity precipitation using environmentally responsive, Z-domain-elastin-like polypeptide (Z-ELP) fusion proteins has been shown to be a promising alternative. However, elevated temperature and salt concentrations necessary for precipitation resulted in decreased antibody monomer content and reduced purification capacity. To improve upon the existing technology, we reported an enhanced affinity precipitation of antibodies by conjugating Z-ELP to a 25 nm diameter, self-assembled E2 protein nanocage (Z-ELP-E2). The enlarged scale of aggregate formation and IgG-triggered crosslinking through multi-valent binding significantly outperformed traditional Z-ELP-based methods. In the current work, we sought to develop an affinity precipitation process capable of purifying industrial monoclonal antibodies (mAbs) at ambient temperature with minimal added salt. We discovered that the mAb-nanocage complex aggregated within 10 min at room temperature without the addition of salt due to the enhanced multi-valent cross-linking. After precipitating out of solution, the complex remained insoluble under all wash buffers tested, and only resolubilized after a low pH elution. Through optimization of key process steps, the affinity precipitation yield and impurity clearance met or exceeded protein A chromatography performance with 95% yield, 3.7 logs host cell protein reduction, and >5 logs of DNA reduction from mAb cell culture. Because of the operational flexibility afforded by this one-step affinity capture and precipitation process, the Z-ELP-E2 based approach has the potential to be a viable alternative to platform mAb purification.
Asunto(s)
Anticuerpos Monoclonales/aislamiento & purificación , Cromatografía de Afinidad/métodos , Elastina/metabolismo , Nanoestructuras/química , Animales , Anticuerpos Monoclonales/química , Anticuerpos Monoclonales/metabolismo , Biopolímeros/química , Biopolímeros/metabolismo , Células CHO , Cricetinae , Cricetulus , Elastina/química , Elastina/genética , Escherichia coli/genética , Ensayos Analíticos de Alto Rendimiento , Unión Proteica , Estabilidad Proteica , Proteínas Recombinantes de Fusión/química , Proteínas Recombinantes de Fusión/genética , Proteínas Recombinantes de Fusión/metabolismoRESUMEN
Equilibrium isotherm and kinetic mass transfer measurements are critical to mechanistic modeling of binding and elution behavior within a chromatographic column. However, traditional methods of measuring these parameters are impractically time- and labor-intensive. While advances in high-throughput robotic liquid handling systems have created time and labor-saving methods of performing kinetic and equilibrium measurements of proteins on chromatographic resins in a 96-well plate format, these techniques continue to be limited by physical constraints on protein addition, incubation and separation times; the available concentration of protein stocks and process pools; and practical constraints on resin and fluid volumes in the 96-well format. In this study, a novel technique for measuring protein uptake kinetics (multi-addition batch uptake) has been developed to address some of these limitations during high-throughput batch uptake kinetic measurements. This technique uses sequential additions of protein stock to chromatographic resin in a 96-well plate and the subsequent removal of each addition by centrifugation or vacuum separation. The pore diffusion model was adapted here to model multi-addition batch uptake and was tested and compared with traditional batch uptake measurements of uptake of an Fc-fusion protein on an anion exchange resin. Acceptable agreement between the two techniques is achieved for the two solution conditions investigated here. In addition, a sensitivity analysis of the model to the physical inputs is presented and the advantages and limitations of the multi-addition batch uptake technique are explored.
Asunto(s)
Cromatografía Liquida/métodos , Resinas de Intercambio Aniónico/química , Cromatografía Liquida/instrumentación , Difusión , Cinética , Modelos Químicos , Porosidad , Proteínas/químicaRESUMEN
A fully-mechanistic understanding of protein transport and sorption in chromatographic materials has remained elusive despite the application of modern continuum and molecular observation techniques. While measuring overall uptake rates in proteins in chromatographic media is relatively straightforward, quantifying mechanistic contributions is much more challenging. Further, at equilibrium in fully-loaded particles, measuring rates of kinetic exchange and diffusion can be very challenging. As models of multicomponent separations rely on accurate depictions of protein displacement and elution, a straightforward method is desired to measure the mobility of bound protein in chromatographic media. We have adapted fluorescence recovery after photobleaching (FRAP) methods to study transport and exchange of protein at equilibrium in a single particle. Further, we have developed a mathematical model to capture diffusion and desorption rates governing fluorescence recovery and investigate how these rates vary as a function of protein size, binding strength and media type. An emphasis is placed on explaining differences between polymer-modified and traditional media, which in the former case is characterized by rapid uptake, slow displacement and large elution pools, differences that have been postulated to result from steric and kinetic limitations. Finally, good qualitative agreement is achieved predicting flow confocal displacement profiles in polymer-modified materials, based solely on estimates of kinetic and diffusion parameters from FRAP observations.
Asunto(s)
Cromatografía , Proteínas/química , Adsorción , Difusión , Recuperación de Fluorescencia tras Fotoblanqueo , Resinas de Intercambio Iónico , Cinética , Modelos Químicos , Concentración OsmolarRESUMEN
Most chromatographic processes involve separation of two or more species, so development of a simple, accurate multicomponent chromatographic model can be valuable for improving process efficiency and yield. We consider the case of breakthrough chromatography, which has been considered in great depth for single-component modeling but to a much more limited degree for multicomponent breakthrough. We use the shrinking core model, which provides a reasonable approximation of particle uptake for proteins under strong binding conditions. Analytical column solutions for single-component systems are extended here to predict binary breakthrough chromatographic behavior for conditions under which the external transport resistance is negligible. Analytical results for the location and profile of displacement effects and expected breakthrough curves are derived for limiting cases. More generally, straightforward numerical results have also been obtained through simultaneous solution of a set of simple ordinary differential equations. Exploration of the model parameter space yields results consistent with theoretical expectations. Additionally, both analytical and numerical predictions compare favorably with experimental column breakthrough data for lysozyme-cytochrome c mixtures on the strong cation exchanger SP Sepharose FF. Especially significant is the ability of the model to predict experimentally observed displacement profiles of the more weakly adsorbed species (in this case cytochrome c). The ability to model displacement behavior using simple analytical and numerical techniques is a significant improvement over current methods.