Environmental and Health Impacts of Graphene and Other Two-Dimensional Materials: A Graphene Flagship Perspective.

Two-dimensional (2D) materials have attracted tremendous interest ever since the isolation of atomically thin sheets of graphene in 2004 due to the specific and versatile properties of these materials. However, the increasing production and use of 2D materials necessitate a thorough evaluation of the potential impact on human health and the environment. Furthermore, harmonized test protocols are needed with which to assess the safety of 2D materials. The Graphene Flagship project (2013-2023), funded by the European Commission, addressed the identification of the possible hazard of graphene-based materials as well as emerging 2D materials including transition metal dichalcogenides, hexagonal boron nitride, and others. Additionally, so-called green chemistry approaches were explored to achieve the goal of a safe and sustainable production and use of this fascinating family of nanomaterials. The present review provides a compact survey of the findings and the lessons learned in the Graphene Flagship.

Interactions of airborne graphene oxides with the sexual reproduction of a model plant: When production impurities matter.

The increasing use of graphene-related materials (GRMs) in everyday-life products raises concerns for their possible release into the environment and consequent impact on organisms. GRMs have widely varying effects on plants and, according to recent evidences, graphene oxide (GO) has the potential to interfere with the sexual reproduction owing to its acidic properties and production residues. Here, stigmas of the model plant Cucurbita pepo (summer squash) were subjected to simulated dry depositions of GO and GO purified from production residues (PGO). Stigmas were then hand-pollinated and GRM deposition was checked by ESEM and confocal microscopy. Analysis of stigma integrity, pH homeostasis and pollen-stigma interactions did not reveal negative effects. Fruit and seed production were not affected, but GO depositions of 22.1 ± 7.2 ng mm-2 affected the normal development of seeds, decreasing seed dimensions, seed germination and germination speed. The elemental analysis revealed that GO has significant quantities of production residues, such as strong acids and oxidants, while PGO has only traces, which justifies the differences observed in the effects caused by the two materials. Our results show that GO depositions of up to 11.1 ± 3.6 ng mm-2, which fall within the variation range of total dry particulate matter depositions reported in the literature, are safe for reproduction of C. pepo. This is the first "safety" limit ever recorded for depositions of "out-of-the-box" GO concerning the reproduction of a seed plant. If confirmed for wind-pollinated species, it might be considered for policymaking of GRMs emissions in the air.

The Italian lichens dataset from the TSB herbarium (University of Trieste).

Background: The "Herbarium Universitatis Tergestinae" (TSB), with a total of ca. 50,000 specimens, includes the largest modern collection of lichens in Italy, with 25,796 samples collected from all over the country since 1984, representing 74% of all taxa known to occur in Italy. Almost all specimens have been georeferenced "a posteriori". The dataset is available through GBIF, as well as in ITALIC, the Information System of Italian Lichens. New information: The TSB Herbarium hosts the largest modern lichen collection in Italy, with a total of ca. 50,000 specimens. This dataset contains all of the 25,796 specimens collected within the administrative borders of Italy. Amongst them, 98% are georeferenced and 87% have the date of collection. The dataset includes several type specimens (isotypes and holotypes) and exsiccata.

Photobiont Diversity in Lichen Symbioses From Extreme Environments.

Fungal-algal relationships-both across evolutionary and ecological scales-are finely modulated by the presence of the symbionts in the environments and by the degree of selectivity and specificity that either symbiont develop reciprocally. In lichens, the green algal genus Trebouxia Puymaly is one of the most frequently recovered chlorobionts. Trebouxia species-level lineages have been recognized on the basis of their morphological and phylogenetic diversity, while their ecological preferences and distribution are still only partially unknown. We selected two cosmopolitan species complexes of lichen-forming fungi as reference models, i.e., Rhizoplaca melanophthalma and Tephromela atra, to investigate the diversity of their associated Trebouxia spp. in montane habitats across their distributional range worldwide. The greatest diversity of Trebouxia species-level lineages was recovered in the altitudinal range 1,000-2,500 m a.s.l. A total of 10 distinct Trebouxia species-level lineages were found to associate with either mycobiont, for which new photobionts are reported. One previously unrecognized Trebouxia species-level lineage was identified and is here provisionally named Trebouxia "A52." Analyses of cell morphology and ultrastructure were performed on axenically isolated strains to fully characterize the new Trebouxia "A52" and three other previously recognized lineages, i.e., Trebouxia "A02," T. vagua "A04," and T. vagua "A10," which were successfully isolated in culture during this study. The species-level diversity of Trebouxia associating with the two lichen-forming fungi in extreme habitats helps elucidate the evolutionary pathways that this lichen photobiont genus traversed to occupy varied climatic and vegetative regimes.

Is airborne graphene oxide a possible hazard for the sexual reproduction of wind-pollinated plants?

Products containing graphene-related materials (GRMs) are becoming increasingly common, allowing GRM nanoparticles (NPs) to enter the environment during their life cycle. Thanks to their lightness and bidimensional geometry, GRM NPs can be easily dispersed in the air and travel very long distances. The flowers of wind-pollinated plants may be exposed to airborne GRMs, being apt to intercept pollen from the air and, inevitably, other airborne particles. Here, stigmas of four wind-pollinated plants (Corylus avellana, common hazel; Juglans regia, walnut; Quercus ilex, holm oak; Zea mays, maize) were exposed to airborne graphene oxide (GO) and GO purified from production residues (PGO) at a concentration of 3.7 ng m-3. Subsequently, the stigmas were pollinated and the adhesion of GOs and their effects on stigma integrity and pollen-stigma interaction were examined. The effect of GO NPs in presence of liquid water on the stigma of C. avellana was also investigated. GOs NPs were intercepted by all species, but their effect varied among them. GO reduced pollen adhesion in J. regia and Q. ilex, whereas pollen germination was unaffected in all four species. The presence of a film of water neither completely removed GO NPs from the stigma, nor it enhanced the toxic effect of GO acidity. PGO never affected pollen-stigma interaction, indicating that the phytotoxic substances used for the production of GO, still in traces in commercial GO, are the main cause of GO toxicity. These results reconfirm the need to verify GRMs effects also on key biological processes beside single model organisms.

Enhanced culturing techniques for the mycobiont isolated from the lichen Xanthoria parietina.

Lichens and their isolated symbionts are potentially valuable resources for biotechnological approaches. Especially mycobiont cultures that produce secondary lichen products are receiving increasing attention, but lichen mycobionts are notoriously slow-growing organisms. Sufficient biomass production often represents a limiting factor for scientific and biotechnological investigations, requiring improvement of existing culturing techniques as well as methods for non-invasive assessment of growth. Here, the effects of pH and the supplement of growth media with either D-glucose or three different sugar alcohols that commonly occur in lichens, D-arabitol, D-mannitol and ribitol, on the growth of the axenically cultured mycobiont isolated from the lichen Xanthoria parietina were tested. Either D-glucose or different sugar alcohols were offered to the fungus at different concentrations, and cumulative growth and growth rates were assessed using two-dimensional image analysis over a period of 8 weeks. The mycobiont grew at a pH range from 4.0 to 7.0, whereas no growth was observed at higher pH values. Varying the carbon source in Lilly-Barnett medium (LBM) by replacing 1% D-glucose used in the originally described LBM by either 1%, 2% or 3% of D-mannitol, or 3% of D-glucose increased fungal biomass production by up to 26%, with an exponential growth phase between 2 and 6 weeks after inoculation. In summary, we present protocols for enhanced culture conditions and non-invasive assessment of growth of axenically cultured lichen mycobionts using image analysis, which may be useful for scientific and biotechnological approaches requiring cultured lichen mycobionts. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s11557-021-01707-7.

Graphene environmental biodegradation: Wood degrading and saprotrophic fungi oxidize few-layer graphene.

The environmental biodegradability profile of graphene related materials (GRMs) is important to know in order to predict whether these materials will accumulate in soil or will be transformed by primary decomposers. In this study, few-layer graphene (FLG) was exposed to living and devitalized axenic cultures of two white-rot basidiomycetes (Bjerkandera adusta and Phanerochaete chrysosporium) and one soil saprotrophic ascomycete (Morchella esculenta) with or without lignin, for a period of four months. Over this time, the increase of fungal biomass and presence of H2O2 and oxidizing enzymes [laccase/peroxidase and lignin peroxidase (LiP)] in growth media was assessed by gravimetric and spectrophotometric measurements, respectively. Raman spectroscopy and transmission electron microscopy (TEM) were used to compare the structure of FLG before and after incubation. All of the test fungi decreased pH in growth media and released H2O2 and laccase/peroxidase, but only basidiomycetes released LiP. Independent of growth media composition all fungi were found to be capable to oxidize FLG to a graphene oxide-like material, including M. esculenta, which released only laccase/peroxidase, i.e. the most common enzymes among primary decomposers. These findings suggest that FLG involuntarily released into terrestrial environments would likely be oxidized by soil microflora.

The lichens of the Majella National Park (Central Italy): an annotated checklist.

The botanical exploration of the Majella National Park has a long tradition dating back to the eighteenth century. However, the lichen biota of this area is still poorly investigated. To provide a baseline for future investigations, in this annotated checklist, we summarised all available information on the occurrence of lichens in the Majella National Park, retrieved from previous literature, herbarium material and original data produced by recent research. The checklist includes 342 infrageneric taxa. However, seven taxa are considered as dubious, thus setting the number of accepted taxa at 335, i.e. 45.8% of those currently known to occur in the Abruzzo Region. This checklist provides a baseline of the lichens known to occur in the Majella National Park, highlighting the potential of this area as a hotspot of lichen biodiversity, especially from a biogeographical point of view as indicated by the occurrence of several arctic-alpine species that form disjunct populations in the summit area of the massif.

Influence of secondary metabolites on surface chemistry and metal adsorption of a devitalized lichen biomonitor.

Despite the broad use of lichens as biomonitors of airborne trace elements, the surface chemistry and metal adsorption parameters of these organisms are still poorly known. The current investigation is aimed at (i) quantifying the acid-base surface properties and the first-order physical-chemical parameters of Cu2+ and Zn2+ adsorption of devitalized Pseudevernia furfuracea, a lichen commonly used in biomonitoring of airborne trace elements, and (ii) comparing the results with those available for moss biomonitors. Equilibrium constants and metal-binding site concentrations were calculated with a thermodynamic model by taking into account the presence/absence of ancillary extracellular cell wall compounds, namely melanin and acetone-soluble lichen substances. An acid-base titration experiment performed in the pH range of 3-10 showed that melanised and non-melanised P. furfuracea samples have lower pHPZC (3.53-3.99) and higher metal-binding site concentrations (0.96-1.20 mmol g-1) compared to that of the mosses investigated so far at the same experimental conditions. Melanin biosynthesis increased the content of carboxyl and phosphoryl groups and reduces that of amine/polyphenols. Cu2+ and Zn2+ adsorption was unaffected by the degree of melanisation while the removal of extracellular lichen substances slightly decreased Zn2+ adsorption. Although Cu2+ and Zn2+ adsorption parameters related to P. furfuracea surfaces were 3 times lower than in the mosses, lichen samples adsorbed the same amount of Cu2+ and 30% more Zn2+. The present study contributes in understanding the role of ancillary cell wall compounds in Cu2+ and Zn2+ adsorption in a model lichen. It also provides a first comparison between the surface physico-chemical characteristics of lichens and mosses frequently used as biomonitors of trace elements.

Element accumulation performance of living and dead lichens in a large-scale transplant application.

In bioaccumulation studies, sample devitalization through acid washing or oven drying is commonly applied to enhance the element accumulation efficiency of moss sample. Such aspect, however, has never been considered in biomonitoring surveys using lichens. In this study, the trace element accumulation performance of living (L) and dead (D) samples of the lichen Pseudevernia furfuracea was compared by a side-by-side transplanting at 40 sites in a large, mixed land use area of NE Italy for 8 weeks. Devitalization was achieved without any physico-chemical treatments, by storing lichen samples in a dark cool room for 18 months. Health status of lichens was assessed before and after the sample exposure by chlorophyll fluorescence emission. Although elemental analysis of the two exposed sample sets revealed a similar trace element pollution scenario, the content of 13 out of the 24 selected elements was higher in D samples. By expressing results as exposed-to-unexposed (EU) ratio, D samples show a higher bioaccumulation signal in 80% of transplant sites for Al, Ca, Fe, Hg, Pb and Ti. Overall, the health status of lichen samples might lead to interpretational discrepancies when EU ratio is classified according to the recently proposed bioaccumulation scale.

How dry is dry? Molecular mobility in relation to thallus water content in a lichen.

Lichens can withstand extreme desiccation to water contents of ≤ 0.1 g H2O g-1 DW, and in the desiccated state are among the most extremotolerant organisms known. Desiccation-tolerant life-forms such as seeds, mosses and lichens survive 'vitrification', that is the transition of their cytoplasm to a 'glassy' state, which causes metabolism to cease. However, our understanding of the mechanisms of desiccation tolerance is hindered by poor knowledge of what reactions occur in the desiccated state. Using Flavoparmelia caperata as a model lichen, we determined at what water contents vitrification occurred upon desiccation. Molecular mobility was assessed by dynamic mechanical thermal analysis, and the de- and re-epoxidation of the xanthophyll cycle pigments (measured by HPLC) was used as a proxy to assess enzyme activity. At 20 °C vitrification occurred between 0.12-0.08 g H2O g-1 DW and enzymes were active in a 'rubbery' state (0.17 g H2O g-1 DW) but not in a glassy state (0.03 g H2O g-1 DW). Therefore, desiccated tissues may appear to be 'dry' in the conventional sense, but subtle differences in water content will have substantial consequences on the types of (bio)chemical reactions that can occur, with downstream effects on longevity in the desiccated state.

Phytohormone release by three isolated lichen mycobionts and the effects of indole-3-acetic acid on their compatible photobionts.

Evidence is emerging that phytohormones represent key inter-kingdom signalling compounds supporting chemical communication between plants, fungi and bacteria. The roles of phytohormones for the lichen symbiosis are poorly understood, particularly in the process of lichenization, i.e. the key events which lead free-living microalgae and fungi to recognize each other, make physical contact and start developing a lichen thallus. Here, we studied cellular and extracellularly released phytohormones in three lichen mycobionts, Cladonia grayi, Xanthoria parietina and Tephromela atra, grown on solid medium, and the effects of indole-3-acetic acid (IAA) on their respective photobionts, Asterochloris glomerata, Trebouxia decolorans, Trebouxia sp. Using ultra-high-performance liquid chromatography coupled with tandem mass spectrometry (UHPLC-MS/MS) we found that mycobionts produced IAA, salicylic acid (SA) and jasmonic acid (JA). IAA represented the most abundant phytohormone produced and released by all mycobionts, whereas SA was released by X. parietina and T. atra, and JA was released by C. grayi only. With a half-life of 5.2 days, IAA degraded exponentially in solid BBM in dim light. When IAA was exogenously offered to the mycobionts' compatible photobionts at "physiological" concentrations (as released by their respective mycobionts and accumulated in the medium over seven days), the photobionts' water contents increased up to 4.4%. Treatment with IAA had no effects on the maximum quantum yield of photosystem II, dry mass, and the contents of photosynthetic pigments and α-tocopherol of the photobionts. The data presented may be useful for designing studies aimed at elucidating the roles of phytohormones in lichens.

Effects of Few-Layer Graphene on the Sexual Reproduction of Seed Plants: An In Vivo Study with Cucurbita pepo L.

Products containing graphene-related materials (GRMs) are becoming quite common, raising concerns for environmental safety. GRMs have varying effects on plants, but their impact on the sexual reproduction process is largely unknown. In this study, the effects of few-layer graphene (FLG) and a similarly layered phyllosilicate, muscovite mica (MICA), were tested in vivo on the reproductive structures, i.e., pollen and stigma, of Cucurbita pepo L. ssp. pepo 'greyzini' (summer squash, zucchini). Pollen was exposed to FLG or MICA, after careful physical-chemical characterization, at concentrations of 0.5 and 2 mg of nanomaterial (NM) per g of pollen for up to six hours. Following this, pollen viability was tested. Stigmas were exposed to FLG or MICA for three hours and then analyzed by environmental scanning electron microscopy to verify possible alterations to their surface. Stigmas were then hand-pollinated to verify the effects of the two NMs on pollen adhesion and in vivo pollen germination. FLG and MICA altered neither pollen viability nor the stigmatic surface. However, both NMs equivalently decreased pollen adhesion and in vivo germination compared with untreated stigmas. These effects deserve further attention as they could impact on production of fruits and seeds. Importantly, it was shown that FLG is as safe as a naturally occurring nanomaterial.

Environmental DNA assessment of airborne plant and fungal seasonal diversity.

Environmental DNA (eDNA) metabarcoding and metagenomics analyses can improve taxonomic resolution in biodiversity studies. Only recently, these techniques have been applied in aerobiology, to target bacteria, fungi and plants in airborne samples. Here, we present a nine-month aerobiological study applying eDNA metabarcoding in which we analyzed simultaneously airborne diversity and variation of fungi and plants across five locations in North and Central Italy. We correlated species composition with the ecological characteristics of the sites and the seasons. The most abundant taxa among all sites and seasons were the fungal genera Cladosporium, Alternaria, and Epicoccum and the plant genera Brassica, Corylus, Cupressus and Linum, the latter being much more variable among sites. PERMANOVA and indicator species analyses showed that the plant diversity from air samples is significantly correlated with seasons, while that of fungi varied according to the interaction between seasons and sites. The results consolidate the performance of a new eDNA metabarcoding pipeline for the simultaneous amplification and analysis of airborne plant and fungal particles. They also highlight the promising complementarity of this approach with more traditional biomonitoring frameworks and routine reports of air quality provided by environmental agencies.

Abundance and Extracellular Release of Phytohormones in Aero-terrestrial Microalgae (Trebouxiophyceae, Chlorophyta) As a Potential Chemical Signaling Source1.

Phytohormones are pivotal signaling compounds in higher plants, in which they exert their roles intracellularly, but are also released for cell-to-cell communication. In unicellular organisms, extracellularly released phytohormones can be involved in chemical crosstalk with other organisms. However, compared to higher plants, hardly any knowledge is available on the roles of phytohormones in green algae. Here, we studied phytohormone composition and extracellular release in aero-terrestrial Trebouxiophyceae. We investigated (a) which phytohormones are produced and if they are released extracellularly, and if extracellular phytohormone levels are (b) affected by environmental stimuli, and (c) differ between lichen-forming and non-lichen-forming species. Three free-living microalgae (Apatococcus lobatus, Chloroidium ellipsoideum, and Myrmecia bisecta) and three lichen-forming microalgae (Asterochloris glomerata, Trebouxia decolorans, and Trebouxia sp.) were studied. Algae were grown on solid media and the following cellular phytohormones were identified by ultra-high-performance liquid chromatography coupled with tandem mass spectrometry (UHPLC-MS/MS): indole-3-acetic acid (IAA), indole-3-butyric acid (IBA), abscisic acid (ABA), gibberellin A4 (GA4 ), and zeatin (ZT). Furthermore, IAA, IBA, ABA, jasmonic acid (JA), gibberellin A3 (GA3 ), and GA4 were found to be released extracellularly. IAA and ABA were released by all six species, and IAA was the most concentrated. Phytohormone release was affected by light and water availability, especially IAA in A. glomerata, Trebouxia sp., and C. ellipsoideum. No clear patterns were observed between lichen-forming and non-lichen-forming species. The results are envisaged to contribute valuable baseline information for further studies into the roles of phytohormones in microalgae.

Beyond graphene oxide acidity: Novel insights into graphene related materials effects on the sexual reproduction of seed plants.

Graphene related materials (GRMs) are currently being used in products and devices of everyday life and this strongly increases the possibility of their ultimate release into the environment as waste items. GRMs have several effects on plants, and graphene oxide (GO) in particular, can affect pollen germination and tube growth due to its acidic properties. Despite the socio-economic importance of sexual reproduction in seed plants, the effect of GRMs on this process is still largely unknown. Here, Corylus avellana L. (common Hazel) pollen was germinated in-vitro with and without 1-100 µg mL-1 few-layer graphene (FLG), GO and reduced GO (rGO) to identify GRMs effects alternative to the acidification damage caused by GO. At 100 µg mL-1 both FLG and GO decreased pollen germination, however only GO negatively affected pollen tube growth. Furthermore, GO adsorbed about 10 % of the initial Ca2+ from germination media accounting for a further decrease in germination of 13 % at the pH created by GO. In addition, both FLG and GO altered the normal tip-focused reactive oxygen species (ROS) distribution along the pollen tube. The results provided here help to understand GRMs effect on the sexual reproduction of seed plants and to address future in-vivo studies.

Validation of particulate dispersion models by native lichens as point receptors: a case study from NE Italy.

Atmospheric dispersion model (ADM) simulations are increasingly used as management tools in air pollution monitoring programs, even in the absence of proper validation. Biomonitors can provide important information for ADM validation, but an open question is their temporal frame of application, particularly when native organisms are used. In this study, we tested two alternative ADM simulating the total suspended particulate (TSP) released by a coal power station, against the element content of two native lichens collected at 40 sites, integrated by soil samples. The ADM simulations differed by the time references: the 6-month period preceding lichen sampling, approximately corresponding to the estimated age of the samples (Mod. A), and the whole year 2005, representative of the local average conditions and used in the plant authorization processes (Mod. B). A generalized regression model analysis clearly showed that the Cr, Pb and V content of lichen samples was spatially associated to the outcomes of Mod. A, but not with Mod. B. Interestingly, the Cr content of lichen samples consistently correlated to TSP concentration predicted by Mod. A along two transects placed downwind from the coal power station. This result was corroborated by an air particulate matter sampling which pointed out that air Cr concentrations increased during the operative period of the source. Overall, our results suggest that lichen bioaccumulation data can proficiently be used to validate ADM simulations if the exposure time of the biological samples is consistent with the temporal domain of the ADM simulations.

Graphene-based materials do not impair physiology, gene expression and growth dynamics of the aeroterrestrial microalga Trebouxia gelatinosa.

The effects of two graphene-based materials (GBMs), few-layers graphene (FLG) and graphene oxide (GO), were studied in the aeroterrestrial green microalga Trebouxia gelatinosa. Algae were subjected to short- and long-term exposure to GBMs at 0.01, 1 and 50 µg mL - 1. GBMs internalization after short-term exposures was investigated with confocal microscopy, Raman spectroscopy and TEM. Potential negative effects of GBMs, compared to the oxidative stress induced by H2O2, were verified by analyzing chlorophyl a fluorescence (ChlaF), expression of stress-related genes and membrane integrity. Effects of up to 4-week-long exposures were assessed analyzing growth dynamics, ChlaF and photosynthetic pigments. GBMs were not observed in cells but FLG was detected at the interface between the cell wall and plasma membrane, whereas GO was observed adherent to the external wall surface. FLG caused the down-regulation of the HSP70-1 gene, with the protein levels remaining stable, whereas GO had no effect. In comparison, H2O2 produced dose- and time-dependent effects on ChlaF, gene expression and HSP70 protein level. Long-term exposures to GBMs did not affect growth dynamics, ChlaF or photosynthetic pigment contents, indicating that the few observed short-term effects were not dangerous on the long-term. Results suggest that interactions between FLG and plasma membrane were harmless, activating a down-regulation of the HSP70-1 gene similar to that induced by H2O2. Our work shows that studying GBMs effects on non-model organisms is important since the results of model green microalgae are not representative of the whole taxonomic group.

Background element content in the lichen Pseudevernia furfuracea: a comparative analysis of digestion methods.

In bioaccumulation studies, the interpretation of pollutant contents in the target biomonitor has to be performed by assessing a deviation from an unaltered reference condition. A common strategy consists in the comparison with background element content (BEC) values, often built up by uncritically merging methodologically heterogeneous data. In this respect, the acid digestion of samples was identified as a major step affecting BEC data. Here, the analytical outcomes of two acid mixtures were compared on a set of matched paired samples of the lichen Pseudevernia furfuracea, a widely used biomonitor for which BEC values based on partial digestion were previously provided. The standard reference material BCR 482 (P. furfuracea) was used to validate analytical procedures consisting of either a HF total mineralization or an aqua regia partial one, both associated to ICP-MS multi-element analysis. In particular, the performance of the procedures was evaluated by comparing analytical results of field samples with the accuracy obtained on BCR aliquots (measured-to-expected percentage ratio). The total digestion showed a better performance for Al, As, Ba, Ca, Cd, Cu, Fe, Mn, Ni, Se, Sn, and Zn, whereas the opposite was found for Cr, Co, P, and S. Moreover, new BEC values were provided for P. furfuracea using a consolidated statistical approach, after a total sample digestion with hydrofluoric acid. The multivariate investigation of the background variability of 43 elements in 57 remote Italian sites led to the identification of geographically homogeneous areas for which BEC values are provided for use as reference in biomonitoring applications.

Safety Assessment of Graphene-Based Materials: Focus on Human Health and the Environment.

Graphene and its derivatives are heralded as "miracle" materials with manifold applications in different sectors of society from electronics to energy storage to medicine. The increasing exploitation of graphene-based materials (GBMs) necessitates a comprehensive evaluation of the potential impact of these materials on human health and the environment. Here, we discuss synthesis and characterization of GBMs as well as human and environmental hazard assessment of GBMs using in vitro and in vivo model systems with the aim to understand the properties that underlie the biological effects of these materials; not all GBMs are alike, and it is essential that we disentangle the structure-activity relationships for this class of materials.