RESUMEN
BACKGROUND: Lectin receptor-like kinases (Lec-RLKs), a subfamily of RLKs, have been demonstrated to play an important role in signal transduction from cell wall to the plasma membrane during biotic stresses. Lec-RLKs include legume lectin-like proteins (LLPs), an important group of apoplastic proteins that are expressed in regenerating cell walls and play a role in immune-related responses. However, it is unclear whether LLPs have a function in abiotic stress mitigation and related signaling pathways. Therefore, in this study, we examined the possible role of LLPs in Arabidopsis thaliana (AtLLPs) under various abiotic stresses. RESULTS: The study was initiated by analyzing the chromosomal localization, gene structure, protein motif, peptide sequence, phylogeny, evolutionary divergence, and sub-cellular localization of AtLLPs. Furthermore, the expression profiling of these AtLLPs was performed using publicly accessible microarray datasets under various abiotic stresses, which indicated that all AtLLPs were differently expressed in both root and shoot tissues in response to abiotic stresses. The cis-regulatory elements (CREs) analysis in 500 bp promoter sequences of AtLLPs suggested the presence of multiple important CREs implicated for regulating abiotic stress responses, which was further supported by expressional correlation analysis between AtLLPs and their CREs cognate transcription factors (TFs). qRT-PCR analysis of these AtLLPs after 2, 6, and 12 h of cold, high light, oxidative (MV), UV-B, wound, and ozone stress revealed that all AtLLPs displayed differential expression patterns in most of the tested stresses, supporting their roles in abiotic stress response and signaling again. Out of these AtLLPs, AT1g53070 and AT5g03350 appeared to be important players. Furthermore, the mutant line of AT5g03350 exhibited higher levels of ROS than wild type plants till 12 h of exposure to high light, MV, UV-B, and wound, whereas its overexpression line exhibited comparatively lower levels of ROS, indicating a positive role of this gene in abiotic stress response in A. thaliana. CONCLUSIONS: This study provides basic insights in the involvement of two important representative AtLLPs, AT1g53070 and AT5g03350, in abiotic stress response. However, further research is needed to determine the specific molecular mechanism of these AtLLPs in abiotic stress mitigation and related signaling pathways in A. thaliana.
Asunto(s)
Proteínas de Arabidopsis , Arabidopsis , Fabaceae , Arabidopsis/metabolismo , Proteínas de Arabidopsis/metabolismo , Fabaceae/genética , Fabaceae/metabolismo , Perfilación de la Expresión Génica , Regulación de la Expresión Génica de las Plantas , Lectinas/genética , Filogenia , Proteínas de Plantas/genética , Especies Reactivas de Oxígeno/metabolismo , Estrés Fisiológico/genéticaRESUMEN
BACKGROUND: S-domain receptor-like kinases (SD-RLKs) are an important and multi-gene subfamily of plant receptor-like/pelle kinases (RLKs), which are known to play a significant role in the development and immune responses of Arabidopsis thaliana. The conserved cysteine residues in the extracellular domain of SD-RLKs make them interesting candidates for sensing reactive oxygen species (ROS), assisting oxidative stress mitigation and associated signaling pathways during abiotic stresses. However, how closely SD-RLKs are interrelated to abiotic stress mitigation and signaling remains unknown in A. thaliana. RESULTS: This study was initiated by examining the chromosomal localization, phylogeny, sequence and differential expression analyses of 37 SD-RLK genes using publicly accessible microarray datasets under cold, osmotic stress, genotoxic stress, drought, salt, UV-B, heat and wounding. Out of 37 SD-RLKs, 12 genes displayed differential expression patterns in both the root and the shoot tissues. Promoter structure analysis suggested that these 12 SD-RLK genes harbour several potential cis-regulatory elements (CREs), which are involved in regulating multiple abiotic stress responses. Based on these observations, we investigated the expression patterns of 12 selected SD-RLKs under ozone, wounding, oxidative (methyl viologen), UV-B, cold, and light stress at different time points using semi-qRT-PCR. Of these 12 SD-SRKs, the genes At1g61360, At1g61460, At1g61380, and At4g27300 emerged as potential candidates that maintain their expression in most of the stress treatments till exposure for 12 h. Expression patterns of these four genes were further verified under similar stress treatments using qRT-PCR. The expression analysis indicated that the gene At1g61360, At1g61380, and At1g61460 were mostly up-regulated, whereas the expression of At4g27300 either up- or down-regulated in these conditions. CONCLUSIONS: To summarize, the computational analysis and differential transcript accumulation of SD-RLKs under various abiotic stresses suggested their association with abiotic stress tolerance and related signaling in A. thaliana. We believe that a further detailed study will decipher the specific role of these representative SD-RLKs in abiotic stress mitigation vis-a-vis signaling pathways in A. thaliana.
Asunto(s)
Arabidopsis , Arabidopsis/genética , Simulación por Computador , Sequías , Regulación de la Expresión Génica de las Plantas , Filogenia , Cloruro de Sodio , Estrés Fisiológico/genéticaRESUMEN
Metacaspases are distant relatives of animal caspases found in plants, protozoa and fungi. Some recent studies have demonstrated that metacaspases are involved in regulating the developmental and environmentally induced programmed cell death in plants. In this study, we identified metacaspase gene family in potato (Solanum tuberosum L.) and analyzed their expression pattern in various developmental tissues and stress responses of plants. There were eight metacaspase genes identified in the Peptidase (Cysteine protease) C14 family and based upon sequence alignment and phylogenetic analysis, a systematic nomenclature of potato metacaspases (SotubMCs) has been proposed. Three of the eight candidate genes showing homology with Arabidopsis thaliana type I metacaspase, AtMC1 were given name SotubMC1, SotubMC2 and SotubMC3 as per the degree of relatedness. Similarly, the next three being homologous to A. thaliana type I metacaspase, AtMC3 were named SotubMC4, SotubMC5, and SotubMC6. The remaining two were named SotubMC7 and SotubMC8, showing significant similarity with type II metacaspases of A. thaliana, AtMC4 and AtMC9, respectively. Evolutionary divergence analysis of SotubMCs from its orthologs in seven other members of Solanaceae family as well as with A. thaliana, Vitis vinifera and Oryza sativa was also carried out. The dN/dS ratios of the orthologous pairs suggested the SotubMCs were under purifying (negative) selection in course of plant evolution. Splicing patterns of potato metacaspases were also analyzed. Amongst all SotubMCs, SotubMC2, SotubMC4, SotubMC6 and SotubMC7 genes appeared to produce multiple alternative spliced variants of different lengths. Furthermore using protein modeling tools, we have predicted the protein structure of identified metacaspases. The cis-regulatory elements analysis was also performed exhibiting the presence of development, stress and hormones related cis-elements in the promoter regions of the SotubMCs. This indicates that potato metacaspases might be playing important roles in the development, stress and hormone responsive pathways. Moreover, relative expression analysis of identified genes was carried out using qRT-PCR in various developmental tissues that also include stolons and tubers. The eight metacaspases showed differential expression in different tissues. Some of the tissues such as leaf undergoing senescence among different leaf developmental stages (immature, mature and senescent) displayed higher relative expression of some of the metacaspases, implying their involvement in leaf senescence. The expression pattern of SotubMCs under various abiotic, biotic and hormonal stresses was also analysed. The results showed that many members of the potato metacaspase gene family displayed differential expression patterns under various stress conditions. Taken together, the study could provide crucial resources for further investigations to understand the functional roles of the identified metacaspases in potato.
RESUMEN
The solvent used for preparing the binder solution in wet granulation can affect the granulation end point and also impact the thermal, rheological, and flow properties of the granules. The present study investigates the effect of solvents and percentage relative humidity (RH) on the granules of microcrystalline cellulose (MCC) with hydroxypropyl methyl cellulose (HPMC) as the binder. MCC was granulated using 2.5% w/w binder solution in water and ethanol/water mixture (80:20 v/v). Prepared granules were dried until constant percentage loss on drying, sieved, and further analyzed. Dried granules were exposed to different percentage RH for 48 h at room temperature. Powder rheometer was used for the rheological and flow characterization, while thermal effusivity and differential scanning calorimeter were used for thermal analysis. The thermal effusivity values for the wet granules showed a sharp increase beginning 50% w/w binder solution in both cases, which reflected the over-wetting of granules. Ethanol/water solvent batches showed greater resistance to flow as compared to the water solvent batches in the wet granule stage, while the reverse was true for the dried granule stage, as evident from the basic flowability energy values. Although the solvents used affected the equilibration kinetics of moisture content, the RH-exposed granules remained unaffected in their flow properties in both cases. This study indicates that the solvents play a vital role on the rheology and flow properties of MCC granules, while the different RH conditions have little or no effect on them for the above combination of solvent and binder.
Asunto(s)
Celulosa/química , Derivados de la Hipromelosa/química , Solventes/química , Rastreo Diferencial de Calorimetría/métodos , Química Farmacéutica/métodos , Etanol/química , Excipientes/química , Humedad , Cinética , Tamaño de la Partícula , Polvos/química , Reología , Tecnología Farmacéutica/métodos , Agua/química , HumectabilidadRESUMEN
AIM: An attempt is made to provide better understanding of the compatibility aspect of excipients with different properties of active pharmaceutical ingredient (API) using various rheological, thermal and morphological studies conducted on binary mixtures of Dibasic Calcium Phosphate anhydrous (DCP-A) and Dibasic Calcium Phosphate dihydrate (DCP-D) forms with cohesive API's (Acetaminophen and Aspirin). METHOD: Binary mixtures of DCP's were prepared by addition of 0% w/w to 50% w/w of the API in each powder blend. Powder rheological analysis were conducted using FT4 powder rheometer, rotational shear cell and empirical approaches such as angle of repose (AOR), Hausner ratio (HR) and Carr's index (CI). Thermal analysis was conducted using differential scanning calorimetry (DSC) and thermal effusivity. Morphological studies were conducted using Scanning Electron Microscopy (SEM) to determine the fundamental differences between powder materials. Result/Conclusions: Powder rheometer showed distinctive understanding in the flowability behavior of binary mixtures with addition of increasing proportion of API's than empirical approaches. Thermal approaches revealed the potential interaction of water of crystallization DCP-D while such interaction was absent in DCP-A. Binary mixtures prepared using DCP-D were better flowable while blends containing DCP-A were better in stability (physical), compressibility and permeability. This study allows the scientist to understand the powder packing of different blends with their flowability and compressibility parameter and helps selection of appropriate form of hydrate for relevant API.