RESUMEN
A highly conductive metallic gas that is quantum mechanically confined at a solid-state interface is an ideal platform to explore non-trivial electronic states that are otherwise inaccessible in bulk materials. Although two-dimensional electron gases have been realized in conventional semiconductor interfaces, examples of two-dimensional hole gases, the counterpart to the two-dimensional electron gas, are still limited. Here we report the observation of a two-dimensional hole gas in solution-processed organic semiconductors in conjunction with an electric double layer using ionic liquids. A molecularly flat single crystal of high-mobility organic semiconductors serves as a defect-free interface that facilitates two-dimensional confinement of high-density holes. A remarkably low sheet resistance of 6 kΩ and high hole-gas density of 1014 cm-2 result in a metal-insulator transition at ambient pressure. The measured degenerate holes in the organic semiconductors provide an opportunity to tailor low-dimensional electronic states using molecularly engineered heterointerfaces.
RESUMEN
Solution-processed organic thin film transistors (OTFTs) are an essential building block for next-generation printed electronic devices. Organic semiconductors (OSCs) that can spontaneously form a molecular assembly play a vital role in the fabrication of OTFTs. OTFT fabrication processes consist of sequential deposition of functional layers, which inherently brings significant difficulties in realizing ideal properties because underlayers are likely to be damaged by application of subsequent layers. These difficulties are particularly prominent when forming metal contact electrodes directly on an OSC surface, due to thermal damage during vacuum evaporation and the effect of solvents during subsequent photolithography. In this work, we demonstrate a simple and facile technique to transfer contact electrodes to ultrathin OSC films and form an ideal metal/OSC interface. Photolithographically defined metal electrodes are transferred and laminated using a polymeric bilayer thin film. One layer is a thick sacrificial polymer film that makes the overall film easier to handle and is water-soluble for dissolution later. The other is a thin buffer film that helps the template adhere to a substrate electrostatically. The present technique does not induce any fatal damage in the substrate OSC layers, which leads to successful fabrication of OTFTs composed of monolayer OSC films with a mobility of higher than 10 cm2 V-1 s-1, a subthreshold swing of less than 100 mV decade-1, and a low contact resistance of 175 Ωâ cm. The reproducibility of efficient contact fabrication was confirmed by the operation of a 10 × 10 array of monolayer OTFTs. The technique developed here constitutes a key step forward not only for practical OTFT fabrication but also potentially for all existing vertically stacked organic devices, such as light-emitting diodes and solar cells.
RESUMEN
Utilizing the intrinsic mobility-strain relationship in semiconductors is critical for enabling strain engineering applications in high-performance flexible electronics. Here, measurements of Hall effect and Raman spectra of an organic semiconductor as a function of uniaxial mechanical strain are reported. This study reveals a very strong, anisotropic, and reversible modulation of the intrinsic (trap-free) charge carrier mobility of single-crystal rubrene transistors with strain, showing that the effective mobility of organic circuits can be enhanced by up to 100% with only 1% of compressive strain. Consistently, Raman spectroscopy reveals a systematic shift of the low-frequency Raman modes of rubrene to higher (lower) frequencies with compressive (tensile) strain, which is indicative of a reduction (enhancement) of thermal molecular disorder in the crystal with strain. This study lays the foundation of the strain engineering in organic electronics and advances the knowledge of the relationship between the carrier mobility, low-frequency vibrational modes, strain, and molecular disorder in organic semiconductors.
RESUMEN
Thin film transistors (TFTs) are indispensable building blocks in any electronic device and play vital roles in switching, processing, and transmitting electronic information. TFT fabrication processes inherently require the sequential deposition of metal, semiconductor, and dielectric layers and so on, which makes it difficult to achieve reliable production of highly integrated devices. The integration issues are more apparent in organic TFTs (OTFTs), particularly for solution-processed organic semiconductors due to limits on which underlayers are compatible with the printing technologies. We demonstrate a ground-breaking methodology to integrate an active, semiconducting layer of OTFTs. In this method, a solution-processed, semiconducting membrane composed of few-molecular-layer-thick single-crystal organic semiconductors is exfoliated by water as a self-standing ultrathin membrane on the water surface and then transferred directly to any given underlayer. The ultrathin, semiconducting membrane preserves its original single crystallinity, resulting in excellent electronic properties with a high mobility up to 12 [Formula: see text] The ability to achieve transfer of wafer-scale single crystals with almost no deterioration of electrical properties means the present method is scalable. The demonstrations in this study show that the present transfer method can revolutionize printed electronics and constitute a key step forward in TFT fabrication processes.
RESUMEN
Building on significant developments in materials science and printing technologies, organic semiconductors (OSCs) promise an ideal platform for the production of printed electronic circuits. However, whether their unique solution-processing capability can facilitate the reliable mass manufacture of integrated circuits with reasonable areal coverage, and to what extent mass production of solution-processed electronic devices would allow substantial reductions in manufacturing costs, remain controversial. In the present study, we successfully manufactured a 4-inch (c.a. 100 mm) organic single-crystalline wafer via a simple, one-shot printing technique, on which 1,600 organic transistors were integrated and characterized. Owing to their single-crystalline nature, we were able to verify remarkably high reliability and reproducibility, with mobilities up to 10 cm2 V-1 s-1, a near-zero turn-on voltage, and excellent on-off ratio of approximately 107. This work provides a critical milestone in printed electronics, enabling industry-level manufacturing of OSC devices concomitantly with lowered manufacturing costs.
RESUMEN
The efficiency with which polymeric semiconductors can be chemically doped-and the charge carrier densities that can thereby be achieved-is determined primarily by the electrochemical redox potential between the π-conjugated polymer and the dopant species1,2. Thus, matching the electron affinity of one with the ionization potential of the other can allow effective doping3,4. Here we describe a different process-which we term 'anion exchange'-that might offer improved doping levels. This process is mediated by an ionic liquid solvent and can be pictured as the effective instantaneous exchange of a conventional small p-type dopant anion with a second anion provided by an ionic liquid. The introduction of optimized ionic salt (the ionic liquid solvent) into a conventional binary donor-acceptor system can overcome the redox potential limitations described by Marcus theory5, and allows an anion-exchange efficiency of nearly 100 per cent. As a result, doping levels of up to almost one charge per monomer unit can be achieved. This demonstration of increased doping levels, increased stability and excellent transport properties shows that anion-exchange doping, which can use an almost infinite selection of ionic salts, could be a powerful tool for the realization of advanced molecular electronics.
RESUMEN
Two-dimensional (2D) layered semiconductors are a novel class of functional materials that are an ideal platform for electronic applications, where the whole electronic states are directly modified by external stimuli adjacent to their electronic channels. Scale-up of the areal coverage while maintaining homogeneous single crystals has been the relevant challenge. We demonstrate that wafer-size single crystals composed of an organic semiconductor bimolecular layer with an excellent mobility of 10 cm2 V-1 s-1 can be successfully formed via a simple one-shot solution process. The well-controlled process to achieve organic single crystals composed of minimum molecular units realizes unprecedented low contact resistance and results in high-speed transistor operation of 20 MHz, which is twice as high as the common frequency used in near-field wireless communication. The capability of the solution process for scale-up coverage of high-mobility organic semiconductors opens up the way for novel 2D nanomaterials to realize products with large-scale integrated circuits on film-based devices.
RESUMEN
Organic neutral π-monoradicals are promising semiconductors with balanced ambipolar carrier-transport abilities, which arise from virtually identical spatial distribution of their singly occupied and unoccupied molecular orbitals, SOMO(α) and SOMO(ß), respectively. Herein, we disclose a boron-stabilized triphenylmethyl radical that shows outstanding thermal stability and resistance toward atmospheric conditions due to the substantial spin delocalization. The radical is used to fabricate organic Mott-insulator transistors that operate at room temperature, wherein the radical exhibits well-balanced ambipolar carrier transport properties.
RESUMEN
Organic molecular semiconductors are solution processable, enabling the growth of large-area single-crystal semiconductors. Improving the performance of organic semiconductor devices by increasing the charge mobility is an ongoing quest, which calls for novel molecular and material design, and improved processing conditions. Here we show a method to increase the charge mobility in organic single-crystal field-effect transistors, by taking advantage of the inherent softness of organic semiconductors. We compress the crystal lattice uniaxially by bending the flexible devices, leading to an improved charge transport. The mobility increases from 9.7 to 16.5 cm(2) V(-1) s(-1) by 70% under 3% strain. In-depth analysis indicates that compressing the crystal structure directly restricts the vibration of the molecules, thus suppresses dynamic disorder, a unique mechanism in organic semiconductors. Since strain can be easily induced during the fabrication process, we expect our method to be exploited to build high-performance organic devices.
RESUMEN
Hall effect and slightly negative temperature dependence of the mobility in polymeric transistors are demonstrated. The semiconductor channel is based on a polycyclopentadithiophene-benzothiadiazole (CDT-BTZ) donor-acceptor copolymer film whose chain direction is oriented by mechanical compression at the surface of an ionic liquid. The mobility is 5.6 cm(2) V(-1) s(-1) at room temperature, and is further improved to 6.7 cm(2) V(-1) s(-1) at 260 K.
RESUMEN
N-shaped organic semiconductors are synthesized via four steps from a readily available starting material. Such semiconductors exhibit preferable ionization potential for p-type operation, thermally stable crystalline phase over 200 °C, and high carrier mobility up to 16 cm(2) V(-1) s(-1) (12.1 cm(2) V(-1) s(-1) on average) with small threshold voltages in solution-crystallized field-effect transistors.
RESUMEN
The polarization of the ferroelectric polymer P(VDF-TrFE) decreases upon prolonged cycling. Understanding of this fatigue behavior is of great technological importance for the implementation of P(VDF-TrFE) in random-access memories. However, the origin of fatigue is still ambiguous. Here we investigate fatigue in thin-film capacitors by systematically varying the frequency and amplitude of the driving waveform. We show that the fatigue is due to delamination of the top electrode. The origin is accumulation of gases, expelled from the capacitor, under the impermeable top electrode. The gases are formed by electron-induced phase decomposition of P(VDF-TrFE), similar as reported for inorganic ferroelectric materials. When the gas barrier is removed and the waveform is adapted, a fatigue-free ferroelectric capacitor based on P(VDF-TrFE) is realized. The capacitor can be cycled for more than 10(8) times, approaching the programming cycle endurance of its inorganic ferroelectric counterparts.