Evaluation of bidirectional causal association between cardiovascular diseases and pneumonia: A Mendelian randomization study.

AIMS: Observational evidence suggests a bidirectional relationship between cardiovascular diseases (CVDs) and pneumonia. However, the causality between CVDs and pneumonia remains undetermined. Thus, we aimed to investigate the bidirectional causality between CVDs and pneumonia using Mendelian randomization (MR) analysis. METHODS: Global genetic correlation analysis and bidirectional two-sample MR analysis were performed to infer the genetic correlation and causality between CVDs and pneumonia by using genome-wide association study (GWAS) summary data from GWAS meta-analysis study, FinnGen or UK Biobank consortium. Post-hoc power calculation was conducted to assess the power for detecting the causality. RESULTS: The linkage disequilibrium score regression analysis suggested a positive significant genetic correlation between CVDs and pneumonia. In the MR analysis, only genetically predicted ischemic stroke was causally associated with any pneumonia (odds ratio [OR]: 1.119, 95% confidence interval [CI]: 1.031-1.393), bacterial pneumonia (OR: 1.251, 95% CI: 1.032-1.516), and pneumococcal pneumonia (OR: 1.308, 95% CI: 1.093-1.565), but the causality was attenuated to non-significance after adjusting for deep venous thrombosis. However, the causal effects of pneumonia on CVDs were not detected. Post-hoc power calculations supported strong power (more than 80%) to detect the causality. CONCLUSIONS: Ischemic stroke is causally associated with an increased risk of pneumonia, but there is no evidence for the causal effect of pneumonia on CVDs. Our findings have important implications as they provide further support for the thrombosis risk screening as a strategy to reduce the incidence of pneumonia in patients with ischemic stroke.

This Mendelian randomization analysis aimed to investigate the bidirectional causality between cardiovascular diseases and pneumonia. Our findings support the causal association of ischemic stroke on pneumonia, but indicate no evidence for the causal effects of pneumonia on cardiovascular diseases. The causal association of ischemic stroke on pneumonia was revealed to rely on deep venous thrombosis, which provided further support for the thrombosis risk screening as a strategy to reduce the incidence of pneumonia in patients with ischemic stroke.

Exosomes for hair growth and regeneration.

Exosomes are lipid bilayer vesicles, 30-200 nm in diameter, that are produced by cells and play essential roles in cell-cell communication. Exosomes have been studied in several medical fields including dermatology. Hair loss, a major disorder that affects people and sometimes causes mental stress, urgently requires more effective treatment. Because the growth and cycling of hair follicles are governed by interactions between hair follicle stem cells (HFSCs) and dermal papilla cells (DPCs), a better understanding of the mechanisms responsible for hair growth and cycling through exosomes may provide new insights into novel treatments for hair loss. In this review, we focused on the comprehensive knowledge and recent studies on exosomes in the field of hair development and regeneration. We classified exosomes of several cellular origins for the treatment of hair loss. Exosomes and their components, such as microRNAs, are promising drugs for effective hair loss treatment.

Application of IRI Visualization to Terahertz Vibrational Spectroscopy of Hydroxybenzoic Acid Isomers.

The characteristic absorption spectra of three positional isomers of hydroxybenzoic acid are measured using a terahertz time-domain spectroscopy system (THz-TDS) in the 0.6-2.0 THz region at room temperature. Significant differences in their terahertz spectra are discovered, which indicates that THz-TDS is an effective means to identify positional isomers. In order to simulate their spectra, the seven molecular clusters of 2-, 3-, and 4-hydroxybenzoic acid (2-, 3-, and 4-HA) are calculated using the DFT-D3 method. Additionally, the potential energy distribution (PED) method is used to analyze their vibration modes. The analysis indicates that the vibration modes of 2-HA are mainly out-of-plane angle bending and bond angle bend in plane. The vibration modes of 3-HA are mainly bond length stretch and dihedral angle torsion. The vibration modes of 4-HA are mainly bond angle bend in plane and dihedral angle torsion. Interaction region indicator (IRI) analysis is used to visualize the location and type of intermolecular interactions in 2-, 3-, and 4-HA crystals. The results show that the weak interaction type of 2-, 3-, and 4-HA is dominated by van der Waals (vdW) interaction. Therefore, we can confirm that terahertz spectroscopy detection technology can be used as an effective means to identify structural isomers and detect the intermolecular interactions in these crystals. In addition, it can explain the absorption mechanism of terahertz waves interacting with matter.

Ultra-high performance humidity sensor enabled by a self-assembled CuO/Ti3C2T X MXene.

An ultra-high performance humidity sensor based on a CuO/Ti3C2T X MXene has been investigated in this work. The moisture-sensitive material was fabricated by a self-assembly method. The morphology and nanostructure of the fabricated CuO/Ti3C2T X composites were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectra. The humidity sensing abilities of the CuO/Ti3C2T X sensor in the relative humidity (RH) range from 0% to 97% were studied. The results showed that the humidity sensor had a high sensitivity of 451 kΩ/% RH, short response time (0.5 s) and recovery time (1 s), a low hysteresis value, and good repeatability. The CuO/Ti3C2T X sensor exhibited remarkable properties in human respiration rate monitoring, finger non-contact sensing, and environmental detection. The moisture-sensitive mechanism of CuO/Ti3C2T X was discussed. The fabricated CuO/Ti3C2T X showed great potential in the application of moisture-sensitive materials for ultra-high-performance humidity sensors.

Collaborative Enhancement of Humidity Sensing Performance by KCl-Doped CuO/SnO2 p-n Heterostructures for Monitoring Human Activities.

In this study, a high-performance humidity sensor based on KCl-doped CuO/SnO2 p-n heterostructures was fabricated by a ball milling-roasting method. The morphology and nanostructure of the fabricated KCl-CuO/SnO2 composite were characterized by scanning electron microscopy, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, and nitrogen sorption analysis. The results showed that the humidity sensor had a high sensitivity of 194 kΩ/%RH, short response and recovery times of 1.0 and 1.5 s, a low hysteresis value, and good repeatability. The energy band structure and complex impedance spectrum of the KCl-CuO/SnO2 composite indicated that the excellent humidity sensing performance originated from the ionic conductivity of KCl, the formation of heterojunctions, the change in the Schottky barrier height, and the depletion of electronic depletion layers. The KCl-CuO/SnO2 sensor has great potential in respiratory monitoring, noncontact sensing of finger moisture, and environmental monitoring.

Highly efficient solar-absorber composite material based on tetrapyridylporphyrin for water evaporation and thermoelectric power generation.

Photothermal materials based on organic small molecules have the characteristics of structural diversity and easy modification for solar-driven water evaporation and power generation technology. However, there still exist limitations, such as the utilization of solar energy and photostability. Therefore, it is the focus of current research to design organic photothermal materials with excellent photothermal stability, strong solar absorption capacity, and high photothermal conversion efficiency. Herein, photothermal conversion materials based on tetrapyridylporphyrin (TPyP) is studied, which possesses polypyrrole macrocyclic framework (18π electrons), which makes it exhibit strong absorption in the 300-800 nm region with high photothermal conversion. The interfacial-heating evaporation system based on polyurethane (PU) foam loaded with TPyP was prepared, whose solar-to-vapor conversion efficiency and vapor evaporation rate of PU + TPyP foam solar energy reached 56% and 0.81 kg m-2 h-1, respectively. In addition, TPyP-loaded solar evaporator equipped with abundant microchannels for water flow are integrated with thermoelectric devices, thus achieving an evaporation rate and voltage as high as 0.69 kg m-2 h-1 and 60 mV under 1 kW m-2 solar irradiation, respectively. The successful application of TPyP in water evaporation and power generation effectively addresses the difficulties faced in the process of using organic small molecule photothermal materials to solve the energy crisis.

Dexmedetomidine Mitigates Myocardial Ischemia/Reperfusion-Induced Mitochondrial Apoptosis through Targeting lncRNA HCP5.

Our study aimed to explore the function and mechanism of Dexmedetomidine (Dex) in regulating myocardial ischemia/reperfusion (I/R)-induced mitochondrial apoptosis through lncRNA HCP5. We demonstrated Dex suppressed I/R-induced myocardial infarction and mitochondrial apoptosis in vivo. Dex induced the expression of lncRNA HCP5 and MCL1, inhibited miR-29a expression and activated the JAK2/STAT3 signaling. Dex attenuated hypoxia/reoxygenation (H/R)-induced mitochondrial apoptosis by upregulating lncRNA HCP5 in cardiomyocytes. Overexpression of lncRNA HCP5 sponged miR-29a to suppress H/R-induced mitochondrial apoptosis. Knockdown of miR-29a also alleviated cardiomyocyte apoptosis by upregulating MCL1. Overexpression of lncRNA HCP5 activated the JAK2/STAT3 signaling through sponging miR-29a and enhancing MCL1 expression in cardiomyocytes. Dex mitigated myocardial I/R-induced mitochondrial apoptosis through the lncRNA HCP5/miR-29a/MCL1 axis and activation of the JAK2/STAT3 signaling.

A new technology for rapid determination of isomers of hydroxybenzoic acid by terahertz spectroscopy.

This study investigated the feasibility of using terahertz (THz) technology for the rapid identification of isomers. The time-domain spectra of 2-hydroxybenzoic acid (2-HA), 3-hydroxybenzoic acid (3-HA), and 4-hydroxybenzoic acid (4-HA) were measured by a THz time-domain spectroscopy system (THz-TDS) in the range of 0.3-1.8 THz. Aiming at the isomer classification problem, a THz spectral data classification model based on a variational mode decomposition-particle swarm optimization-support vector machine (VMD-PSO-SVM) method was proposed. Empirical mode decomposition (EMD) and variational mode decomposition (VMD) were used to extract the first eight intrinsic mode functions (IMFs) of the time-domain signal. Principal component analysis (PCA) was used to extract the first 80 principal components of each modal component as the classification feature vector. The particle swarm optimization (PSO) and support vector machine (SVM) algorithms were used to construct 2-, 3-, and 4-HA classification models. We found that the prediction accuracy of the VMD-PSO-SVM model was significantly higher than that of EMD-PSO-SVM model regardless of the modal components. For both EMD and VMD, with the increase in the IMF number, the corresponding classification recognition accuracy tended to decrease. The results showed that the rapid identification model of hydroxybenzoic acid isomers based on THz spectroscopy and SVM was effective and feasible, providing an accurate and rapid method for the chemical synthesis and quality monitoring of biomedicine.

Effects of the PI3K/Akt signaling pathway on the hair inductivity of human dermal papilla cells in hair beads.

Dermal papilla cells (DPCs), which play a central role in the regulation of hair follicle development and hair growth, are among the most promising cell sources for hair regenerative medicine. However, a critical issue in the use of DPCs is the immediate loss of hair inducing functions in typical two-dimensional (2D) culture. We have previously demonstrated that when DPCs are encapsulated in drops of collagen gel (named hair beads, HBs), the density of collagen and cells is concentrated >10-fold during 3 d of culture through the spontaneous constriction of the drops, leading to efficient hair follicle regeneration upon transplantation. However, the mechanisms responsible for the activation of the hair-inducing functions of DPCs have been poorly elucidated. Here, transcriptome comparisons of human DPCs in HB culture and in typical 2D culture revealed that the phosphoinositide 3-kinase and Akt (PI3K/Akt) signaling pathway was significantly upregulated in HB culture. Inhibition of the PI3K/Akt signaling pathway decreased the hair-inducing capability of DPCs in HBs, while the activation of the PI3K/Akt signaling pathway using an activator improved trichogenous gene expression of DPCs in 2D culture. These results suggest that the PI3K/Akt signaling pathway is crucial for the maintenance and restoration of hair inductivity of DPCs. HB culture and/or activators of the PI3K/Akt signaling pathway could be a promising strategy for preparing DPCs for hair regenerative medicine.

A diagnostic test: combined detection of heparin-binding protein, procalcitonin, and C-reactive protein to improve the diagnostic accuracy of bacterial respiratory tract infections.

Background: Respiratory tract infection (RTI) is one of the most common diseases worldwide, and its incidence is rising year by year due to environmental pollution. Sputum culture remains the gold standard for RTI diagnosis, but its performance is limited by difficulties related to the sampling and testing of the sputum specimens. Heparin-binding protein (HBP), procalcitonin (PCT), and C-reaction protein (CRP) are Inflammatory markers. They have the advantage of being fast, accurate and reproducible, but limited by their sensitivity and specificity. We explored the clinical value of the combined detection of them in the diagnosis of bacterial RTIs. Methods: Patients who fulfilled the inclusion criteria were selected as the case group, healthy age- and sex-matched subjects were enrolled as a control group. The subjects' HBP, PCT, and CRP levels were detected. The case group was further divided into two groups according to the bacterial culture results, and the differences in the markers were statistically analyzed. The receiver operating characteristic (ROC) curves were drawn, and the areas under the ROC curve (AUCs) were calculated to analyze the diagnostic values of each marker and their combination in parallel for bacterial RTIs. Results: The plasma HBP, PCT, and CRP levels of patients in the bacterial and non-bacterial infection groups were significantly higher than those of patients in the healthy control group, and were positively correlated to the severity of the disease. for HBP with an AUC of 0.785 [95% confidence interval (CI): 0.686-0.884], a sensitivity of 0.821, a specificity of 0.771; PCT with an AUC of 0.767 (95% CI: 0.664-0.870), a sensitivity of 0.773, a specificity of 0.791, and CRP with an AUC of 0.748 (95% CI: 0.642-0.854), a sensitivity of 0.839, a specificity of 0.696 in the bacterial and non-bacterial infection groups. The combined detection of HBP + CRP had the optimal diagnostic performance, with an AUC of 0.797 (95% CI: 0.698-0.895; P<0.001), a sensitivity of 0.809, a specificity of 0.800. Conclusions: The combined detection of HBP and CRP is valuable for diagnosing bacterial RTIs and may guide the development of reasonable treatment protocols in clinical settings.

LncRNA TINCR improves cardiac hypertrophy by regulating the miR-211-3p-VEGFB-SDF-1α-CXCR4 pathway.

Cardiac hypertrophy is a common cardiovascular disease that is found worldwide and is characterized by heart enlargement, eventually resulting in heart failure. Exploring the regulatory mechanism of cardiac hypertrophy is beneficial for understanding its pathogenesis and treatment. In our study, we have showed TINCR was downregulated and miR-211-3p was upregulated in TAC- or Ang II-induced models of cardiac hypertrophy. Dual luciferase and RIP assays revealed that TINCR served as a competitive endogenous RNA (ceRNA) for miR-211-3p. Then, we observed that knockdown of miR-211-3p alleviated TAC- or Ang II-induced cardiac hypertrophy both in vivo and in vitro. Mechanistically, we demonstrated that miR-211-3p directly targeted VEGFB and thus regulated the expression of SDF-1α and CXCR4. Rescue assays further confirmed that TINCR suppressed the progression of cardiac hypertrophy by competitively binding to miR-211-3p, thereby enhancing the expression of VEGFB and activating the VEGFB-SDF-1α- CXCR4 signal. Furthermore, overexpression of TINCR suppressed TAC-induced cardiac hypertrophy in vivo by targeting miR-211-3p-VEGFB-SDF-1α- CXCR4 signalling. In conclusion, our research suggests that LncRNA TINCR improves cardiac hypertrophy by targeting miR-211-3p, thus relieving its suppressive effects on the VEGFB-SDF-1α-CXCR4 signalling axis. TINCR and miR-211-3p might act as therapeutic targets for the treatment of cardiac hypertrophy.

Creep-Fatigue Crack Initiation Simulation of a Modified 12% Cr Steel Based on Grain Boundary Cavitation and Plastic Slip Accumulation.

High-temperature components in power plants may fail due to creep and fatigue. Creep damage is usually accompanied by the nucleation, growth, and coalescence of grain boundary cavities, while fatigue damage is caused by excessive accumulated plastic deformation due to the local stress concentration. This paper proposes a multiscale numerical framework combining the crystal plastic frame with the meso-damage mechanisms. Not only can it better describe the deformation mechanism dominated by creep from a microscopic viewpoint, but also reflects the local damage of materials caused by irreversible microstructure changes in the process of creep-fatigue deformation to some extent. In this paper, the creep-fatigue crack initiation analysis of a modified 12%Cr steel (X12CrMoWvNBN10-1-1) is carried out for a given notch specimen. It is found that creep cracks usually initiate at the triple grain boundary junctions or at the grain boundaries approximately perpendicular to the loading direction, while fatigue cracks always initiate from the notch surface where stress is concentrated. In addition to this, the crack initiation life can be quantitatively described, which is affected by the average grain size, initial notch size, stress range and holding time.

Effect of ultrasonic surface deep rolling combined with oxygen boost diffusion treatment on fatigue properties of pure titanium.

Ultrasonic surface deep rolling (USDR), oxygen boost diffusion (OBD), and their combination (USDR-OBD) were all used to improve the surface hardening of pure titanium. The microstructure, microhardness, and fatigue life of pure titanium treated by USDR, OBD, and USDR-OBD methods were analyzed. USDR treatment induced a severe deformation area, while OBD treatment produced a brittle oxygen diffusion zone. The USDR-OBD treated samples approached the highest hardness in comparison with other treated samples. The fatigue lives of USDR treated samples were improved, which was due to the high compressive residual stress and refined grains. However, the fatigue lives of both OBD treated samples and USDR-OBD treated samples were decreased due to premature crack initiation and rapid propagation in the oxygen diffusion zone. Finally, the fatigue fracture mechanisms of different samples were proposed.

Catheter-Based Radiofrequency Renal Sympathetic Denervation Decreases Left Ventricular Hypertrophy in Hypertensive Dogs.

This study explored the effects of renal sympathetic denervation (RDN) on hyperlipidity-induced cardiac hypertrophy in beagle dogs. Sixty beagles were randomly assigned to the control group, RDN group, or sham-operated group. The control group was fed with a basal diet, while the other two groups were given a high-fat diet to induce model hypertension. The RDN group underwent an RDN procedure, and the sham-operated group underwent only renal arteriography. At 1, 3, and 6 months after the RDN procedure, the diastolic blood pressure (DBP) and systolic blood pressure (SBP) levels were markedly decreased in the RDN group relative to the sham group (P < 0.05). After 6 months, serum norepinephrine (NE) and angiotensin II (AngII), as well as left ventricular levels, in the RDN group were statistically lower than those in the sham group (P < 0.05). Also, the left ventricular mass (LVM) and left ventricular mass index (LVMI) were significantly decreased, while the E/A peak ratio was drastically elevated (P < 0.05). Pathological examination showed that the degree of left ventricular hypertrophy and fibrosis in the RDN group was statistically decreased relative to those of the sham group and that the collagen volume fraction (CVF) and perivascular circumferential collagen area (PVCA) were also significantly reduced (P < 0.05). Renal sympathetic denervation not only effectively reduced blood pressure levels in hypertensive dogs but also reduced left ventricular hypertrophy and myocardial fibrosis and improved left ventricular diastolic function. The underlying mechanisms may involve a reduction of NE and AngII levels in the circulation and myocardial tissues, which would lead to the delayed occurrence of left ventricular remodeling.

Utilizing an Animal Model to Identify Brain Neurodegeneration-Related Biomarkers in Aging.

Glycine N-methyltransferase (GNMT) regulates S-adenosylmethionine (SAMe), a methyl donor in methylation. Over-expressed SAMe may cause neurogenic capacity reduction and memory impairment. GNMT knockout mice (GNMT-KO) was applied as an experimental model to evaluate its effect on neurons. In this study, proteins from brain tissues were studied using proteomic approaches, Haemotoxylin and Eosin staining, immunohistochemistry, Western blotting, and ingenuity pathway analysis. The expression of Receptor-interacting protein 1(RIPK1) and Caspase 3 were up-regulated and activity-dependent neuroprotective protein (ADNP) was down-regulated in GNMT-KO mice regardless of the age. Besides, proteins related to neuropathology, such as excitatory amino acid transporter 2, calcium/calmodulin-dependent protein kinase type II subunit alpha, and Cu-Zn superoxide dismutase were found only in the group of aged wild-type mice; 4-aminobutyrate amino transferase, limbic system-associated membrane protein, sodium- and chloride-dependent GABA transporter 3 and ProSAAS were found only in the group of young GNMT-KO mice and are related to function of neurons; serum albumin and Rho GDP dissociation inhibitor 1 were found only in the group of aged GNMT-KO mice and are connected to neurodegenerative disorders. With proteomic analyses, a pathway involving Gonadotropin-releasing hormone (GnRH) signal was found to be associated with aging. The GnRH pathway could provide additional information on the mechanism of aging and non-aging related neurodegeneration, and these protein markers may be served in developing future therapeutic treatments to ameliorate aging and prevent diseases.

Brazing Coupling Performance of Piezoelectric Waveguide Transducers for the Monitoring of High Temperature Components.

Piezoelectric waveguide transducers possess great potential for the online monitoring of high temperature critical components, in order to improve their operational safety. Due to the use of a waveguide bar, the sensory device is not susceptible to high temperature environments, which enables the long-term service of the piezoelectric transducers. However, the coupling between the waveguide bar and the high-temperature component has been proven to be the most important part of the monitoring system. In order to effectively transmit waves through the junction of the waveguide bar and the monitoring target, it is necessary to research a reliable coupling method to connect the waveguide transducers with the host structure. In the present research, the feasibility of brazing coupling for wave propagation through the junction was investigated through experiments. Piezoelectric waveguide transducers were welded using various kinds of brazing filler metals. The experimental results indicate that the coupling effects of the brazing welding depend on the filler metals. At the same time, some filler metals for the effective coupling of the transducer and the target monitoring component were identified. The brazing coupling method was verified that it can non-dispersively and effectively propagate waves into the host structure with much better reliability than the conventional dry coupling approach. Moreover, the high-temperature experimental results show that the brazing-coupled waveguide bar system can work reliably and stably in high temperatures at 300 °C for a long time. This work strives to pave a solid foundation for the application of piezoelectric waveguide transducers for the structural health monitoring of high temperature critical components.

Characteristics of high-temperature equipment monitoring using dry-coupled ultrasonic waveguide transducers.

Dry-coupled ultrasonic waveguide transducers enable the long-term monitoring of the critical mechanical components working in high temperature environment. In these systems, waveguide units are applied to isolate the vulnerable piezoelectric elements from the harsh measurement zones. However, the disturbance cannot be overcome, which may arise from inevitably temperature fluctuation and the indirect measurement in long term monitoring. In the present research, a high temperature experimental system using dry-coupled ultrasonic waveguide transducers is investigated. The disturbances caused by this measurement system are studied in the heating period, holding period and cooling period, respectively. Moreover, the correlations between the group velocities, dispersion curves, signal amplitudes, waveforms under temperature variations are investigated. At last, the dispersion characteristics of the shear horizontal wave in high temperature stainless steel plate are analyzed. This work strives to pave a solid foundation for the application of SH waves to online monitoring of high-temperature equipment using dry-coupled ultrasonic waveguide transducers.

Genotype-Guided Dosing of Warfarin in Chinese Adults: A Multicenter Randomized Clinical Trial.

BACKGROUND: Warfarin is an effective treatment for thromboembolic disease but has a narrow therapeutic index; optimal anticoagulation dosage can differ tremendously among individuals. We aimed to evaluate whether genotype-guided warfarin dosing is superior to routine clinical dosing for the outcomes of interest in Chinese patients. METHODS: We conducted a multicenter, randomized, single-blind, parallel-controlled trial from September 2014 to April 2017 in 15 hospitals in China. Eligible patients were ≥18 years of age, with atrial fibrillation or deep vein thrombosis without previous treatment of warfarin or a bleeding disorder. Nine follow-up visits were performed during the 12-week study period. The primary outcome measure was the percentage of time in the therapeutic range of the international normalized ratio during the first 12 weeks after starting warfarin therapy. RESULTS: A total of 660 participants were enrolled and randomly assigned to a genotype-guided dosing group or a control group under standard dosing. The genotype-guided dosing group had a significantly higher percentage of time in the therapeutic range than the control group (58.8% versus 53.2% [95% CI of group difference, 1.1-10.2]; P=0.01). The genotype-guided dosing group also achieved the target international normalized ratio sooner than the control group. In subgroup analyses, warfarin normal sensitivity group had an even higher percentage of time in the therapeutic range during the first 12 weeks compared with the control group (60.8% versus 48.9% [95% CI, 1.1-24.4]). The incidence of adverse events was low in both groups. CONCLUSIONS: The outcomes of genotype-guided warfarin dosing were superior to those of clinical standard dosing. These findings raise the prospect of precision warfarin treatment in China. Registration: URL: https://www.clinicaltrials.gov; Unique identifier: NCT02211326.

Optimal Design Methodology of Tapered Waveguide Transducers for Thickness Monitoring.

For the purpose of providing transducers for long-term monitoring of wall thinning of critical pressure equipment in corrosion or high temperature environments, the optimal design methodology for tapered waveguide units was proposed in the present study. Firstly, the feasibility of the quasi-fundamental shear horizontal (SH0*) wave propagating in the tapered waveguide units was analyzed via numerical simulations, and the transmitting limitations of the non-dispersive SH0* wave were researched. Secondly, several tapered waveguide transducers with varying cross-sections to transmit pure SH0* wave were designed according to the numerical results. Experimental investigations were carried out, and the results were compared with waveguide transducers with a prismatic cross-section. It was found that the tapered waveguide units can transmit non-dispersive shear horizontal waves and suppress the wave attenuation at the same time. The experimental results agreed very well with the numerical simulations. Finally, high-temperature experiments were carried out, and the reliability of thickness measuring by the tapered waveguide transducers was validated. The errors between the measured and the true thicknesses were small. This work paves a solid foundation for the optimal design of tapered waveguide transducers for thickness monitoring of equipment in harsh environments.

Parity and carotid atherosclerosis in elderly Chinese women.

BACKGROUND: The relationship between parity and atherosclerosis has been reported in some ethnic populations. However, results regarding Chinese women are still lacking. This study aimed to investigate the association of parity and carotid atherosclerosis, which has a predictive value of subsequent atherosclerotic events in elderly Chinese women. METHODS: A total of 2, 052 participants from the medical examination center of the Third Xiangya Hospital were enrolled in the study. A standardized, structured questionnaire was administered to collect information on subjects' demographic characteristics, socioeconomic status, and cardiovascular risk factors. High-resolution ultrasound was used to examine carotid plaques and carotid intima-media thickness (IMT). RESULTS: The mean age of participants was 66.1 ± 5.5 years. Women with more birth appeared to have a higher risk of carotid artery plaques. A multivariate-adjusted model yielded an odds ratio of 1.38 (95% CI: 12%-70%, P = 0.003) per birth. A positive association was observed between parity and common carotid IMT (ß ± SE: 0.029 ± 0.006, P < 0.001), and internal carotid IMT (ß ± SE: 0.011 ± 0.005, P = 0.03) in a univariate model; however, these associations became non-significant in multivariate-adjusted models. When common carotid IMT was classified into an IMT ≥ 1 mm group and an IMT < 1 mm group, higher parity was associated with more obvious thickening both in the unadjusted model (OR = 1.61, 95% CI: 1.29-2.00, P < 0.001) and in the fully adjusted model (OR = 1.43, 95% CI: 1.09-1.88, P = 0.01). CONCLUSIONS: There is a positive association between parity and risk of carotid plaques, as well as between parity and risk of obvious thickening for common carotid IMT in elderly Chinese women, indicating multiparous women might experience more atherosclerotic challenges.