RESUMEN
Several therapeutic approaches have been developed to promote bone regeneration, including guided bone regeneration (GBR), where barrier membranes play a crucial role in segregating soft tissue and facilitating bone growth. This study emphasizes the importance of considering specific tissue requirements in the design of materials for tissue regeneration, with a focus on the development of a double-layered membrane to mimic both soft and hard tissues within the context of GBR. The hard tissue-facing layer comprises collagen and zinc-doped bioactive glass to support bone tissue regeneration, while the soft tissue-facing layer combines collagen and chitosan. The electrospinning technique was employed to achieve the production of nanofibers resembling extracellular matrix fibers. The production of nano-sized (~116 nm) bioactive glasses was achieved by microemulsion assisted sol-gel method. The bioactive glass-containing layers developed hydroxyapatite on their surfaces starting from the first week of simulated body fluid (SBF) immersion, demonstrating that the membranes possessed favorable bioactivity properties. Moreover, all membranes exhibited distinct degradation behaviors in various mediums. However, weight loss exceeding 50% was observed in all tested samples after four weeks in both SBF and phosphate-buffered saline (PBS). The double-layered membranes were also subjected to mechanical testing, revealing a tensile strength of approximately 4 MPa. The double-layered membranes containing zinc-doped bioactive glass demonstrated cell viability of over 70% across all tested concentrations (0.2, 0.1, and 0.02 g/mL), confirming the excellent biocompatibility of the membranes. The fabricated polymer bioactive glass composite double-layered membranes are strong candidates with the potential to be utilized in tissue engineering applications.
RESUMEN
Synthetic polymers remain to be a major choice for scaffold fabrication due to their structural stability and mechanical strength. However, the lack of functional moieties limits their application for cell-based therapies which necessitate modification and functionalization. Blending synthetic polymers with natural components is a simple and effective way to achieve the desired biological properties for a scaffold. Herein, nanofibrous mats made of polycaprolactone (PCL) and egg white protein (EWP) blend were developed and further evaluated for use as a scaffold for tissue engineering applications. Homogeneous distribution of EWP was achieved throughout the nanofibrous mats, as shown by immunohistochemistry. ATR-FTIR analysis and contact angle measurements have further confirmed the presence of EWP on the surface of the samples. The swelling test showed that PCL/EWP nanofibers have higher water uptake than PCL nanofibrous mats. Also, EWP addition on the nanofibrous mats resulted in an increase in the tensile strength and Young's modulus of the mats, indicating that the presence of protein can greatly enhance the mechanical properties of the mats. A significantly higher, more uniform, and dispersed cell spreading was observed on days 7 and 14 than that on neat PCL mats, demonstrating the importance of providing the required cues for cell homing by the availability of EWP. Hence, EWP is shown to be a simple and low-cost source for the functionalization of PCL nanofibrous mats. EWP is, therefore, a facile candidate to enhance cellular interactions of synthetic polymers for a wide range of tissue engineering applications.
Asunto(s)
Proteínas del Huevo/química , Nanofibras/química , Poliésteres/química , Polímeros/química , Ingeniería de Tejidos/instrumentación , Adipocitos/citología , Tejido Adiposo/citología , Animales , Proliferación Celular , Supervivencia Celular , Pollos , Huevos , Módulo de Elasticidad , Humanos , Inmunohistoquímica , Microscopía Electrónica de Rastreo , Faloidina/química , Medicina Regenerativa/métodos , Espectroscopía Infrarroja por Transformada de Fourier , Propiedades de Superficie , Resistencia a la Tracción , Ingeniería de Tejidos/métodos , Andamios del Tejido , Agua/químicaRESUMEN
Spinal cord injury is a devastating condition of the central nervous system, in which traditional treatments are largely ineffective due to the complex nature of the injured tissue. Therefore, biomaterial-based systems have been developed as possible alternative strategies to repair the damaged tissue. In the present study, we aimed to design bioactive agent loaded scaffolds composed of two layers with distinct physical properties to improve tissue regeneration. An electrospun layer with aligned nanofibers was made of collagen (Col) Type-I, poly(lactide-co-glycolide) (PLGA) and laminin to promote cell attachment of mesenchymal-like stem cells towards the direction of fibers, while a Col-based second layer was fabricated by plastic compression to act as a releasing system for NT-3 and chondroitinase ABC, so that axonal growth could be stimulated. Results showed that a source of mesenchymal stem cell (MSC)-like cells, adipose tissue-derived stem cells cultured on the fibrous layer of the matrices were able to adhere and proliferate, where the aligned fibers promoted the cell growth in an organized way. Furthermore, the bilayered matrices also promoted dorsal root ganglion neurite outgrowth. The bilayered matrice with Col/PLGA + laminin top layer appears to promote higher neurite growth. Collectively, the designed constructs show promising structural properties and biological performance for being employed as a scaffold for engineering the spinal cord tissue.
Asunto(s)
Axones/fisiología , Colágeno/química , Técnicas Químicas Combinatorias , Traumatismos de la Médula Espinal/terapia , Ingeniería de Tejidos/métodos , Andamios del Tejido , Tejido Adiposo/metabolismo , Animales , Materiales Biocompatibles/química , Adhesión Celular , Proliferación Celular/efectos de los fármacos , Condroitina ABC Liasa/química , Ganglios Espinales/efectos de los fármacos , Laminina/química , Células Madre Mesenquimatosas/metabolismo , Neurotrofina 3/química , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/química , Ratas , Ratas Wistar , Médula Espinal/efectos de los fármacosRESUMEN
Dual meshes are often preferred in the treatment of umbilical and incisional hernias where the abdominal wall defect is large. These meshes are generally composed of either two nonabsorbable layers or a nonabsorbable layer combined with an absorbable one that degrades within the body upon healing of the defect. The most crucial point in the design of a dual mesh is to produce the respective layers based on the structure and requirements of the recipient site. We herein developed a dual mesh that consists of two layers: a nanofibrous layer made of poly (glycerol sebacate)/poly (caprolactone) (PGS/PCL) to support the healing of the abdominal wall defect and a nondegradable, nonadhesive smooth layer made of polycarbonateurethane (PU) with suitable properties to avoid the adhesion of the viscera to the mesh. To prepare the double-sided structure, PGS/PCL was directly electrospun onto the PU film. This processing approach provided a final product with well-integrated layers as observed by a scanning electron microscope. Tensile test performed at the dry state of the samples showed that the dual mesh has the ability to elongate seven times more as compared with the commercially available counterparts, mimicking the native tissue properties. The degradation test carried out at physiological conditions revealed that PGS started to degrade within the first 15 days. in vitro studies with human umbilical vein endothelial cells demonstrated the double function of the meshes, in which PU layer did not allow cell adhesion, whereas PGS/PCL layer has the ability to support cell adhesion and proliferation. Therefore, the material developed in this study has the potential to be an alternative to the existing hernia mesh products.
Asunto(s)
Decanoatos/química , Células Endoteliales/patología , Glicerol/análogos & derivados , Hernia Abdominal/cirugía , Ensayo de Materiales , Nanofibras/química , Polímeros/química , Mallas Quirúrgicas , Resistencia a la Tracción , Animales , Caproatos , Adhesión Celular , Línea Celular , Proliferación Celular , Elasticidad , Glicerol/química , Herniorrafia , Células Endoteliales de la Vena Umbilical Humana , Humanos , Lactonas , Ratones , Microscopía Electrónica de Rastreo , Poliésteres , Polipropilenos , Presión , Prótesis e Implantes , Solventes , Estrés Mecánico , Adherencias TisularesRESUMEN
Biodegradable composite membranes containing propolis were produced from PCL/PLLA blends using a simple and low-cost solvent casting method, and subsequently their physicochemical, mechanical, and antibacterial properties were characterized. SEM analysis revealed that the addition of propolis has created honeycomb-like structures on the film surfaces. The flexibility of the films increased in the presence of propolis, which may provide ease of use during application. Propolis disrupted the organized structure of both polymers at the molecular level and caused decreases in the melting points. The films with propolis showed faster degradation in physiological conditions due to this molecular disruption. Moreover, the PLLA/PCL/propolis composite films exhibited remarkable antibacterial activities against S. aureus. Collectively, the data suggest that the produced films might be used as an alternative to exiting barrier membranes in guided tissue regeneration.
RESUMEN
Poly-L-lactic acid (PLLA) electrospun nanofiber scaffold is one of the most commonly used synthetic polymer scaffolds for bone tissue engineering application. However, PLLA is hydrophobic in nature, hence does not maintain proper cell adhesion and tissue formation, moreover, it cannot provide the osteo-inductive environment due to inappropriate surface characteristic and the lack of surface motives participating in the first cellular events. To modify these shortcomings different approaches have been used, among those the most commonly used one is coating of the surface of the electrospun nanofiber with natural materials. In this work Wharton's jelly (WJ), a tissue which surrounds the umbilical cord vessels, reaches in high amounts of extracellular matrix (ECM) components mainly; collagen, hyaluronic acid and several sulphated glycosaminoglycans (GAGs) were used to cover the surface of electrospun PLLA nanofiber scaffolds. The surface morphology of the nanofiber scaffold was evaluated via scanning electron microscope, and the in vitro osteogenic differentiation potential was determined by MTT assay and common osteogenic marker tests such as alkaline phosphatase (ALP) activity and calcium deposition tests. Coating of WJ could not change the surface morphology and diameter of the nanofibers. However, WJ-PLLA scaffolds showed higher proliferation of human mesenchymal stem cells (MSC) than tissue culture plate (TCP) and pristine PLLA scaffolds, moreover, WJ-PPLA scaffold demonstrated significant alkaline phosphatase activity and calcium mineralization than either TCP or PLLA nanofiber scaffolds.
RESUMEN
During tendon injuries, the tendon sheath is also damaged. This study aims to test effectiveness of engineered tendon synovial cell biomembrane on prevention of adhesions. Forty New Zealand Rabbits enrolled into four study groups. Engineered synovial sheath was produced by culturing cell suspension on fabricated collagen matrix membrane. Study groups were: tendon repair (group A), tendon repair zone covered with plane matrix (Group B), synovial suspension injection into the zone of repair over matrix (Group C), and biomembrane application (Group D). Biomechanical evaluations of tendon excursion, metacarpophalangeal and proximal interphalangeal joints range of motion, H&E and Alcian Blue with neutral red staining, and adhesion formation graded for histological assessments were studied. Ten non-operated extremities used as control. Tendon excursions and range of motions were significantly higher and close to control group for Group D, p < 0.05. Adhesion formation was not different among Groups C, D, and Control, p > 0.005. Hyaluronic acid synthesis was demonstrated at groups C and D at the zone of injury. Application of synovial cells into the tendon repair zone either by cell suspension or within a biomembrane significantly decreases the adhesion formation. Barrier effect of collagen matrix and restoration of hyaluronic acid synthesis can explain the possible mechanism of action.
Asunto(s)
Modelos Biológicos , Membrana Sinovial/metabolismo , Tendones/patología , Adherencias Tisulares , Animales , Conejos , Tendones/metabolismoRESUMEN
Tissue engineering using scaffolds and growth factors is a crucial approach in bone regeneration and repair. The combination of bioactive agents carrying microparticles with porous scaffolds can be an efficient solution when controlled release of bio-signalling molecules is required. The present study was based on a recent approach using a biodegradable scaffold and protein-loaded microparticles produced in an innovative manner in which protein loss is minimized during the loading process. Bovine serum albumin (BSA)-loaded gelatin microparticles were obtained by grinding freeze-dried membranes of gelatin and BSA. Porous scaffolds (250-355 µm pore size) produced from a polyactide (PLLA) and polycaprolactone (PCL) blend by salt leaching/supercritical CO2 methods were used for the experiments. Gelatin microparticles containing three different BSA amounts were incorporated into the porous scaffolds by using a surfactant. In vitro release profiles showed up to 90% protein loading efficiency. This novel method appears to be an effective approach for producing particles that can minimize protein loss during the loading process.
Asunto(s)
Gelatina/química , Polímeros/química , Proteínas/química , Ingeniería de Tejidos/métodos , Andamios del Tejido/química , Animales , Materiales Biocompatibles/química , Huesos/patología , Bovinos , Sistemas de Liberación de Medicamentos , Péptidos y Proteínas de Señalización Intercelular/química , Cinética , Poliésteres/química , Porosidad , Albúmina Sérica Bovina/química , Tensoactivos/químicaRESUMEN
The objective of this study was to investigate the influence of silk fibroin and oxidized starch conjugation on the enzymatic degradation behavior and the cytocompatability of chitosan based biomaterials. The tensile stress of conjugate membranes, which was at 50 Megapascal (MPa) for the lowest fibroin and starch composition (10 weight percent (wt.%)), was decreased significantly with the increased content of fibroin and starch. The weight loss of conjugates in α-amylase was more notable when the starch concentration was the highest at 30 wt.%. The conjugates were resistant to the degradation by protease and lysozyme except for the conjugates with the lowest starch concentration. After 10 days of cell culture, the proliferation of osteoblast-like cells (SaOS-2) was stimulated significantly by higher fibroin compositions and the DNA synthesis on the conjugate with the highest fibroin (30 wt.%) was about two times more compared to the native chitosan. The light microscopy and the image analysis results showed that the cell area and the lengths were decreased significantly with higher fibroin/chitosan ratio. The study proved that the conjugation of fibroin and starch with the chitosan based biomaterials by the use of non-toxic reductive alkylation crosslinking significantly improved the cytocompatibility and modulated the biodegradation, respectively.
Asunto(s)
Materiales Biocompatibles/metabolismo , Quitosano/metabolismo , Fibroínas/metabolismo , Membranas/metabolismo , Almidón/metabolismo , Línea Celular , Humanos , Osteoblastos/metabolismo , Resistencia a la Tracción , alfa-Amilasas/metabolismoRESUMEN
Recent advances in tissue engineering and regenerative medicine fields can offer alternative solutions to the existing techniques for cartilage repair. In this context, a variety of materials has been proposed, and the injectable hydrogels are among the most promising alternatives. The aim of this work is to explore the ability of poly(N-isopropylacrylamide)-g-methylcellulose (PNIPAAm-g-MC) thermoreversible hydrogel as a three-dimensional support for cell encapsulation toward the regeneration of articular cartilage through a tissue engineering approach. The PNIPAAm-g-MC copolymer was effectively obtained using ammonium-persulfate and N,N,N',N'-tetramethylethylenediamine as initiator as confirmed by Fourier transform infrared spectroscopy and (1) H NMR results. The copolymer showed to be temperature responsive, becoming a gel at temperatures above its lower critical solution temperature (~ 32 °C) while turning into a liquid below it. Results obtained from the MTS test showed that extracts of the hydrogel were clearly noncytotoxic to L929 fibroblast cells. ATDC5 cells, a murine chondrogenic cell line, were used as the in vitro model for this study; they were encapsulated at high cell density within the hydrogel and cultured for up to 28 days. PNIPAAm-g-MC did not affect the cell viability and proliferation, as indicated by both MTS and DNA assays. The results also revealed an increase in synthesis of glycosoaminoglycans within culture time measured by the dimethylmethylene blue quantification assay. These results suggest the viability of using PNIPAAm-g-MC thermoresponsive hydrogel as a three-dimensional scaffold for cartilage tissue engineering using minimal-invasive strategies.
Asunto(s)
Acrilamidas/química , Cartílago/metabolismo , Matriz Extracelular/química , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Metilcelulosa/química , Polímeros/química , Ingeniería de Tejidos/métodos , Resinas Acrílicas , Animales , Materiales Biocompatibles/química , Cartílago/citología , Células Cultivadas , Humanos , Ensayo de Materiales , Ratones , TemperaturaRESUMEN
Microchannel-patterned starch-poly(capro-lactone)/hydydroxyapatite (SPCL-HA) and starch-poly(lactic acid) (SPLA) composite membranes were produced for use as a laminated tissue-engineering scaffold that incorporates both physical and biochemical patterns. For this purpose, SPCL (30% starch) blended with inorganic hydroxyl apatite (50%) and SPLA (50% starch) membranes were made with compressive moulding. Consequently, the microchannel structures (width 102 µm, 174 µm intervals) were developed on the composite membranes by means of micro-patterned metal mould(s) and hydraulic pressing. An elastomer poly(dimetylsiloxane) stamp was used to transfer heparin as a biochemical cue over the microchannel surfaces by micro-contact printing (µCP). Toluidine blue staining of developed capillaries and heparin µCP-coated membranes showed that heparin was transferred predominantly over the microchannel surfaces. Fibroblast cell culture over the microchannel-formed and heparin µCP-modified SPCL-HA and SPLA membranes showed distinct growth patterns. In contrast to the uniform cell layer formed on unmodified microchannels, the cells were bridging across the grooves of heparin-printed microchannels. At extended culture periods, the heparin-printed microchannels were covered with a layer of fibroblast cells without cellular ingrowths inside. This study indicated that the topographical pattern could induce an organization of fibroblasts only with the biochemical cue and the cells' functions can be controlled spatially over the microchannels by using both cues.
Asunto(s)
Materiales Biocompatibles/farmacología , Heparina/farmacología , Membranas Artificiales , Ingeniería de Tejidos/métodos , Animales , Biodegradación Ambiental/efectos de los fármacos , Línea Celular , Proliferación Celular/efectos de los fármacos , Durapatita/farmacología , Ratones , Microscopía Electrónica de Rastreo , Poliésteres/farmacología , Almidón/farmacología , Propiedades de Superficie/efectos de los fármacosRESUMEN
Mimicking the structural organization and biologic function of natural extracellular matrix has been one of the main goals of tissue engineering. Nevertheless, the majority of scaffolding materials for bone regeneration highlights biochemical functionality in detriment of mechanical properties. In this work we present a rather innovative construct that combines in the same structure electrospun type I collagen nanofibers with starch-based microfibers. These combined structures were obtained by a two-step methodology and structurally consist in a type I collagen nano-network incorporated on a macro starch-based support. The morphology of the developed structures was assessed by several microscopy techniques and the collagenous nature of the nano-network was confirmed by immunohistochemistry. In addition, and especially regarding the requirements of large bone defects, we also successfully introduced the concept of layer by layer, as a way to produce thicker structures. In an attempt to recreate bone microenvironment, the design and biochemical composition of the combined structures also envisioned bone-forming cells and endothelial cells (ECs). The inclusion of a type I collagen nano-network induced a stretched morphology and improved the metabolic activity of osteoblasts. Regarding ECs, the presence of type I collagen on the combined structures provided adhesive support and obviated the need of precoating with fibronectin. It was also importantly observed that ECs on the nano-network organized into circular structures, a three-dimensional arrangement distinct from that observed for osteoblasts and resembling the microcappillary-like organizations formed during angiogenesis. By providing simultaneously physical and chemical cues for cells, the herein-proposed combined structures hold a great potential in bone regeneration as a man-made equivalent of extracellular matrix.
Asunto(s)
Materiales Biomiméticos/química , Colágeno/química , Matriz Extracelular/metabolismo , Nanoestructuras/química , Osteoblastos/fisiología , Almidón/química , Andamios del Tejido , Línea Celular , Proliferación Celular , Electroquímica/métodos , Matriz Extracelular/química , Humanos , Osteoblastos/citología , RotaciónRESUMEN
The aim of this study was to develop a 3-D construct carrying an inherent sequential growth factor delivery system. Poly(lactic acid-co-glycolic acid) (PLGA) nanocapsules loaded with bone morphogenetic protein BMP-2 and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanocapsules loaded with BMP-7 made the early release of BMP-2 and longer term release of BMP-7 possible. 3-D fiber mesh scaffolds were prepared from chitosan and from chitosan-PEO by wet spinning. Chitosan of 4% concentration in 2% acetic acid (CHI4-HAc2) and chitosan (4%) and PEO (2%) in 5% acetic acid (CHI4-PEO2-HAc5) yielded scaffolds with smooth and rough fiber surfaces, respectively. These scaffolds were seeded with rat bone marrow mesenchymal stem cells (MSCs). When there were no nanoparticles the initial differentiation rate was higher on (CHI4-HAc2) scaffolds but by three weeks both the scaffolds had similar alkaline phosphatase (ALP) levels. The cell numbers were also comparable by the end of the third week. Incorporation of nanoparticles into the scaffolds was achieved by two different methods: incorporation within the scaffold fibers (NP-IN) and on the fibers (NP-ON). It was shown that incorporation on the CHI4-HAc2 fibers (NP-ON) prevented the burst release observed with the free nanoparticles, but this did not influence the total amount released in 25 days. However NP-IN for the same fibers revealed a much slower rate of release; ca. 70% released at the end of incubation period. The effect of single, simultaneous and sequential delivery of BMP-2 and BMP-7 from the CHI4-HAc2 scaffolds was studied in vitro using samples prepared with both incorporation methods. The effect of delivered agents was higher with the NP-ON samples. Delivery of BMP-2 alone suppressed cell proliferation while providing higher ALP activity compared to BMP-7. Simultaneous delivery was not particularly effective on cell numbers and ALP activity. The sequential delivery of BMP-2 and BMP-7, on the other hand, led to the highest ALP activity per cell (while suppressing proliferation) indicating the synergistic effect of using both growth factors holds promise for the production of tissue engineered bone.
Asunto(s)
Materiales Biocompatibles/química , Proteína Morfogenética Ósea 2/química , Proteína Morfogenética Ósea 7/química , Quitosano/química , Ingeniería de Tejidos/métodos , Animales , Materiales Biocompatibles/efectos adversos , Proteína Morfogenética Ósea 7/farmacología , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Células Cultivadas , Ácido Láctico/química , Ácido Láctico/farmacología , Masculino , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/efectos de los fármacos , Células Madre Mesenquimatosas/ultraestructura , Microscopía Electrónica de Rastreo , Ácido Poliglicólico/química , Ácido Poliglicólico/farmacología , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , Ratas , Ratas Sprague-Dawley , Microtomografía por Rayos XRESUMEN
Tissue engineering offers a promising new approach to create biological alternatives to repair or restore function of damaged or diseased tissues. To obtain three-dimensional tissue constructs, stem or progenitor cells must be combined with a highly porous three-dimensional scaffold, but many of the structures purposed for tissue engineering cannot meet all the criteria required by an adequate scaffold because of lack of mechanical strength and interconnectivity, as well as poor surface characteristics. Fiber-based structures represent a wide range of morphological and geometric possibilities that can be tailored for each specific tissue-engineering application. The present article overviews the research data on tissue-engineering therapies based on the use of biodegradable fiber architectures as a scaffold.
Asunto(s)
Materiales Biocompatibles/química , Cartílago/fisiología , Cartílago/trasplante , Polímeros/química , Ingeniería de Tejidos/métodos , Animales , Sustitutos de Huesos/química , Válvulas Cardíacas/fisiología , Humanos , Células Madre/citología , Estrés MecánicoRESUMEN
Presently the majority of tissue engineering approaches aimed at regenerating bone relies only on post-implantation vascularization. Strategies that include seeding endothelial cells (ECs) on biomaterials and promoting their adhesion, migration and functionality might be a solution for the formation of vascularized bone. Nano/micro-fiber-combined scaffolds have an innovative structure, inspired by extracellular matrix (ECM) that combines a nano-network, aimed to promote cell adhesion, with a micro-fiber mesh that provides the mechanical support. In this work we addressed the influence of this nano-network on growth pattern, morphology, inflammatory expression profile, expression of structural proteins, homotypic interactions and angiogenic potential of human EC cultured on a scaffold made of a blend of starch and poly(caprolactone). The nano-network allowed cells to span between individual micro-fibers and influenced cell morphology. Furthermore, on nano-fibers as well as on micro-fibers ECs maintained the physiological expression pattern of the structural protein vimentin and PECAM-1 between adjacent cells. In addition, ECs growing on the nano/micro-fiber-combined scaffold were sensitive to pro-inflammatory stimulus. Under pro-angiogenic conditions in vitro, the ECM-like nano-network provided the structural and organizational stability for ECs' migration and organization into capillary-like structures. The architecture of nano/micro-fiber-combined scaffolds elicited and guided the 3D distribution of ECs without compromising the structural requirements for bone regeneration.
Asunto(s)
Huesos/citología , Células Endoteliales/citología , Nanoestructuras/química , Neovascularización Fisiológica , Ingeniería de Tejidos/métodos , Huesos/metabolismo , Células Cultivadas , Células Endoteliales/metabolismo , Regulación de la Expresión Génica , Humanos , Inflamación/genética , Inflamación/metabolismo , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Nanoestructuras/ultraestructura , Molécula-1 de Adhesión Celular Endotelial de Plaqueta/metabolismo , Vimentina/metabolismoRESUMEN
In many biomedical applications, the performance of biomaterials depends largely on their degradation behavior. For instance, in drug delivery applications, the polymeric carrier should degrade under physiological conditions slowly releasing the encapsulated drug. The aim of this work was, therefore, to develop an enzymatic-mediated degradation carrier system for the delivery of differentiation agents to be used in bone tissue engineering applications. For that, a polymeric blend of starch with polycaprolactone (SPCL) was used to produce a microparticle carrier for the controlled release of dexamethasone (DEX). In order to investigate the effect of enzymes on the degradation behavior of the developed system and release profile of the encapsulated osteogenic agent (DEX), the microparticles were incubated in phosphate buffer solution in the presence of alpha-amylase and/or lipase enzymes (at physiological concentrations), at 37 degrees C for different periods of time. The degradation was followed by gravimetric measurements, scanning electron microscopy (SEM) and Fourier transformed infrared (FTIR) spectroscopy and the release of DEX was monitored by high performance liquid chromatography (HPLC). The developed microparticles were shown to be susceptible to enzymatic degradation, as observed by an increase in weight loss and porosity with degradation time when compared with control samples (incubation in buffer only). For longer degradation times, the diameter of the microparticles decreased significantly and a highly porous matrix was obtained. The in vitro release studies showed a sustained release pattern with 48% of the encapsulated drug being released for a period of 30 days. As the degradation proceeds, it is expected that the remaining encapsulated drug will be completely released as a consequence of an increasingly permeable matrix and faster diffusion of the drug. Cytocompatibility results indicated the possibility of the developed microparticles to be used as biomaterial due to their reduced cytotoxic effects.
Asunto(s)
Sistemas de Liberación de Medicamentos , Microesferas , Ingeniería de Tejidos/instrumentación , Ingeniería de Tejidos/métodos , Biodegradación Ambiental , Diferenciación Celular , Cromatografía Líquida de Alta Presión , Dexametasona/química , Portadores de Fármacos , Microscopía Electrónica de Rastreo , Tamaño de la Partícula , Poliésteres/química , Polímeros/química , Espectroscopía Infrarroja por Transformada de Fourier , Almidón/química , alfa-Amilasas/químicaRESUMEN
This study reports on the production of chitosan fibers and 3-D fiber meshes for the use as tissue engineering scaffolds. Both structures were produced by means of a wet spinning technique. Maximum strain at break and tensile strength of the developed fibers were found to be 8.5% and 204.9 MPa, respectively. After 14 d of immersion in simulated body fluid (SBF), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and inductively coupled plasma emission (ICP) spectroscopy analyses showed that a bioactive Ca-P layer was formed on the surface of the fibers, meaning that they exhibit a bioactive behavior. The samples showed around 120% max. swelling in physiological conditions. The pore sizes of 3-D chitosan fiber mesh scaffolds were observed to be in the range of 100-500 microm by SEM. The equilibrium-swelling ratio of the developed scaffolds was found to be around 170% (w/w) in NaCl solution at 37 degrees C. Besides that, the limit swelling strain was less than 30%, as obtained by mechanical spectroscopy measurements in the same conditions. The viscoelastic properties of the scaffolds were also evaluated by both creep and dynamic mechanical tests. By means of using short-term MEM extraction test, both types of structures (fibers and scaffolds) were found to be non-cytotoxic to fibroblasts. Furthermore, osteoblasts directly cultured over chitosan fiber mesh scaffolds presented good morphology and no inhibition of cell proliferation could be observed.Osteoblast-like cells proliferating over chitosan based fibers after 7 d of culture.
Asunto(s)
Materiales Biocompatibles/síntesis química , Quitosano/química , Ingeniería de Tejidos , Animales , Materiales Biocompatibles/química , Biodegradación Ambiental , Línea Celular , Proliferación Celular , Quitosano/síntesis química , Pruebas Inmunológicas de Citotoxicidad , Humanos , Ensayo de Materiales , Ratones , Microscopía Electrónica de Rastreo , Porosidad , Propiedades de Superficie , Temperatura , Resistencia a la TracciónRESUMEN
In this study, attachment and growth of Baby Hamster Kidney (BHK) cells on ethylene diamine (EDA)-plasma-treated poly(L-lactide/epsilon-caprolactone) biodegradable copolymer films were investigated. The co-polymer (Mw: 58000; Mn: 35000 and PI 1.60) was synthesised by ring-opening polymerization of the respective dimers with using stannous octoate as the catalyst. The final ratio of L-lactide to epsilon-caprolactone obtained by 1H-NMR was 87:13. The co-polymer films were treated with the EDA-plasma in a glow-discharge apparatus. The BHK-30 cell line was cultured on plain and EDA-plasma-treated films and their pre-wetted forms (with ethanol and/or cell culture medium before use). Cell attachment and growth were followed. Alkaline phosphatase (ALP) activity and glucose uptake in cell culture medium were also investigated. There was no attachment in the first 12 h. Glow-discharge treatment increased significantly the attachment and growth. Pre-wetting with ethanol and cell culture medium was also increase significantly both the attachment and growth.
Asunto(s)
Materiales Biocompatibles/química , Células Epiteliales/metabolismo , Etilenodiaminas/química , Lactonas/química , Poliésteres/química , Polímeros/química , Fosfatasa Alcalina/análisis , Animales , Materiales Biocompatibles/síntesis química , Adhesión Celular , División Celular , Línea Celular , Cricetinae , Medios de Cultivo , Etanol/química , Glucosa/farmacocinética , Punto Isoeléctrico , Riñón/citología , Espectroscopía de Resonancia Magnética , Membranas Artificiales , Peso Molecular , Polímeros/síntesis química , Factores de TiempoRESUMEN
In this study, bone response, possible use and ultimate fate of a chemically-synthesized poly(L-lactide)-hydroxyapatite (PLLA-HA) composite was experimented in canine mandible. Bilateral mandibular second premolars were extracted in four dogs. The PLLA-HA composite was placed into left surgical sites, and right extraction sites were used as controls. After three months of healing, bone specimens were harvested from each animal and processed for histological evaluation. Bone uptake of methylene diphosphonate (99mTc-MDP) was calculated as indicators of osteoblastic activity in the surgical sites. Histological evaluation and the amount of 99mTc-MDP uptake showed that all surgical sites had similar levels of cellular activity and the material was biocompatible. The experimental PLLA-HA composite studied is safe to be used as a small-defect filler in applications such as repair of alveolar defects, ridge augmentations, and sinus lift procedures.