Effects of 3d Transition Metal Substitutions on the Phase Stability and Mechanical Properties of Ti-5.5Al-11.8[Mo]eq Alloys.

The phase stability, mechanical properties, and functional properties of Ti-5.5Al-11.8[Mo]eq alloys are focused on in this study by substituting 3d transition metal elements (V, Cr, Co, and Ni) for Mo as ß-stabilizers to achieve similar ß phase stability and room temperature (RT) superelasticity. The ternary alloy systems with the equivalent chemical compositions of Ti-5.5Al-17.7V, Ti-5.5Al-9.5Cr, Ti-5.5Al-7.0Co, and Ti-5.5Al-9.5Ni (mass%) alloys were selected as the target materials based on the Mo equivalent formula, which has been applied for the Ti-5.5Al-11.8Mo alloy in the literature. The fundamental mechanical properties and functionalities of the selected alloys were examined. The ß phase was stabilized at RT in all alloys except for the Ti-Al-V alloy. Among all alloys, the Ti-Al-Ni alloy exhibited superelasticity in the cyclic loading-unloading tensile tests at RT. As a result, similar to the Ti-5.5Al-11.8Mo mother alloy, by utilizing the Mo equivalent formula to substitute 3d transition metal elements for Mo, a RT superelasticity was successfully imposed.

Promoted mechanical properties and functionalities via Ta-tailored Ti-Au-Cr shape memory alloys towards biomedical applications.

In view of the urgent demands of shape memory alloys (SMAs) for biomedical applications due to the world population aging issue, the mechanical properties and functionalities of the biocompatible Ti-Au-Cr-based SMAs, which are tailored by Ta additions, have been developed in this study. The quaternary SMAs were successfully manufactured by physical metallurgy techniques and their mechanical properties and functionalities were examined. In the continuous tensile tests, it was found that the correlation between the yielding strength and phase stability followed a typical trend of mechanical behavior of SMAs, showing the lowest yielding strength at the metastable ß-parent phase. Functional mappings between the alloy strength and elongation revealed that compared to the Ta-free specimen, the ductility was promoted 50% while the strength remained intact through the 4 at.% introduction of Ta. Slight shape recovery was observed in the cyclic loading-unloading tensile tests during the unloading process and the highest shape recovery was found in the Ti-4 at.% Au-5 at.% Cr-4 at.% Ta specimen. This indicates that the 4 at.% Ta tailored Ti-Au-Cr SMAs could be a promising material for biomedical applications.

Achievement of Room Temperature Superelasticity in Ti-Mo-Al Alloy System via Manipulation of ω Phase Stability.

The achievement of room-temperature (RT) superelasticity in a Ti-Mo-Al ternary alloy system through the addition of a relatively high concentration of Al to manipulate the phase stability of the ω phase is realized in this study. The composition of the Ti-6 mol% Mo (Ti-11.34 mass% Mo) alloy was designated as the starting alloy, while 5 mol% Al (=2.71 mass% Al) and 10 mol% Al (=5.54 mass% Al) were introduced to promote their superelastic behavior. Among the alloys, Ti-6 mol% Mo-10 mol% Al alloy, which was investigated for the very first time in this work, performed the best in terms of superelasticity. On the other hand, Ti-6 mol% Mo and Ti-6 mol% Mo-5 mol% Al alloys exhibited a shape memory effect upon heating. It is worth mentioning that in the transmission electron microscopy observation, ω phase, which appeared along with ß-parent phase, was significantly suppressed as Al concentration was elevated up to 10 mol%. Therefore, the conventional difficulties of the inhibited RT superelasticity were successfully revealed by regulating the number density of the ω phase below a threshold.

Investigations of Effects of Intermetallic Compound on the Mechanical Properties and Shape Memory Effect of Ti-Au-Ta Biomaterials.

Owing to the world population aging, biomedical materials, such as shape memory alloys (SMAs) have attracted much attention. The biocompatible Ti-Au-Ta SMAs, which also possess high X-ray contrast for the applications like guidewire utilized in surgery, were studied in this work. The alloys were successfully prepared by physical metallurgy techniques and the phase constituents, microstructures, chemical compositions, shape memory effect (SME), and superelasticity (SE) of the Ti-Au-Ta SMAs were also examined. The functionalities, such as SME, were revealed by the introduction of the third element Ta; in addition, obvious improvements of the alloy performances of the ternary Ti-Au-Ta alloys were confirmed while compared with that of the binary Ti-Au alloy. The Ti3Au intermetallic compound was both found crystallographically and metallographically in the Ti-4 at.% Au-30 at.% Ta alloy. The strength of the alloy was promoted by the precipitates of the Ti3Au intermetallic compound. The effects of the Ti3Au precipitates on the mechanical properties, SME, and SE were also investigated in this work. Slight shape recovery was found in the Ti-4 at.% Au-20 at.% Ta alloy during unloading of an externally applied stress.

Enhancement of mechanical properties and shape memory effect of Ti-Cr-based alloys via Au and Cu modifications.

The requirements for biomedical materials have been raised greatly due to the rapidly aging global population. Shape memory alloys (SMAs) are indeed promising materials for biomedical applications due to their controllable shape deformation via the manipulation of temperature and/or stress. This study investigated the enhancement of the fundamental mechanical properties and the shape memory effect (SME) in the Ti-Cr-based alloys via the modification of Au and Cu. The quaternary Ti-Cr-Au-Cu alloys were successfully manufactured by physical metallurgy methods and their phase constitutions, mechanical properties, SME, and superelastic (SE) behaviors have been investigated in this study. Cold-workability, which was enhanced by the introduction of the Au element, was elaborated by the phase constitutions of the alloys. The ß-parent phase was stabilized to around body temperature by the introduction of the ß-stabilizers of Cr, Au, and Cu, and the functionalities of the specimens were revealed at the operating temperature. Perfect SME at the shape recovery rate of 100% was practiced by the substitution of Au by Cu and the mechanical properties, such as strength and ductility, were also enhanced. Functional mappings of the fundamental mechanical properties, which could be a helpful tool for the investigations of the quaternary Ti-Cr-Au-Cu alloys, were constructed in this work.

Mechanical Properties Enhancement of the Au-Cu-Al Alloys via Phase Constitution Manipulation.

To enhance the mechanical properties (e.g., strength and elongation) of the face-centered cubic (fcc) α-phase in the Au-Cu-Al system, this study focused on the introduction of the martensite phase (doubled B19 (DB19) crystal structure of Au2CuAl) via the manipulation of alloy compositions. Fundamental evaluations, such as microstructure observations, phase identifications, thermal analysis, tensile behavior examinations, and reflectance analysis, have been conducted. The presence of fcc annealing twins was observed in both the optical microscope (OM) and the scanning electron microscope (SEM) images. Both strength and elongation of the alloys were greatly promoted while the DB19 martensite phase was introduced into the alloys. Amongst all the prepared specimens, the 47Au41Cu12Al and the 44Au44Cu12Al alloys performed the optimized mechanical properties. The enhancement of strength and ductility in these two alloys was achieved while the stress plateau was observed during the tensile deformation. A plot of the ultimate tensile strength (UTS) against fracture strain was constructed to illustrate the effects of the introduction of the DB19 martensite phase on the mechanical properties of the alloys. Regardless of the manipulation of the alloy compositions and the introduction of the DB19 martensite phase, the reflectance stayed almost identical to pure Au.