Triptycene-based diiron(II) mesocates: spin-crossover in solution.

Triptycene-based diiron(II) and dizinc(II) mesocates were obtained using a novel rigid ligand with two pyridylbenzimidazole chelating units fused into the triptycene scaffold. Studies on the diiron(II) assembly in solution showed that the complex undergoes thermal-induced one-step spin-crossover with T1/2 at 243 K (Evans method).

MicroRNAs potentially targeting DDR-related genes are differentially expressed upon exposure to γ-rays during seed germination in wheat.

DNA damage response (DDR), a complex network of cellular pathways that cooperate to sense and repair DNA lesions, is regulated by several mechanisms, including microRNAs. As small, single-stranded RNA molecules, miRNAs post-transcriptionally regulate their target genes by mRNA cleavage or translation inhibition. Knowledge regarding miRNAs influence on DDR-associated genes is still scanty in plants. In this work, an in silico analysis was performed to identify putative miRNAs that could target DDR sensors, signal transducers and effector genes in wheat. Selected putative miRNA-gene pairs were tested in an experimental system where seeds from two wheat mutant lines were irradiated with 50 Gy and 300 Gy gamma(γ)-rays. To evaluate the effect of the treatments on wheat germination, phenotypic and molecular (DNA damage, ROS accumulation, gene/miRNA expression profile) analyses have been carried out. The results showed that in dry seeds ROS accumulated immediately after irradiation and decayed soon after while the negative impact on seedling growth was supported by enhanced accumulation of DNA damage. When a qRT-PCR analysis was performed, the selected miRNAs and DDR-related genes were differentially modulated by the γ-rays treatments in a dose-, time- and genotype-dependent manner. A significant negative correlation was observed between the expression of tae-miR5086 and the RAD50 gene, involved in double-strand break sensing and homologous recombination repair, one of the main processes that repairs DNA breaks induced by γ-rays. The results hereby reported can be relevant for wheat breeding programs and screening of the radiation response and tolerance of novel wheat varieties.

Innovative chitin-glucan based material obtained from mycelium of wood decay fungal strains.

Fungi are an alternative source to animal-based chitin. In fungi, chitin fibrils are strongly interconnected and bound with glucans that justify the unique matrix. The present study aimed to extract chitin and glucans from the mycelium of several wood decay fungal strains in order to obtain flexible materials and to check correlations between chitin content and the mechanical properties of these materials. Five strains were chosen in consideration of their different cell wall chemical composition (high content of α-glucans, ß-glucans or chitin) to evaluate how these differences could influence the mechanical and chemical characteristics of the material. The fungal strains were cultivated in liquid-submerged dynamic fermentation (both flasks and bioreactor). Chitin and glucans were crosslinked with acetic acid and plasticized with glycerol to obtain flexible sheets. Abortiporus biennis, Fomitopsis iberica and Stereum hirsutum strains were found to adapt to produce material with adequate flexibility. The obtained materials were characterized by Thermogravimetric analysis (TGA) for the understanding of the material composition. The material obtained from each species was mechanically tested in terms of tear strength, elongation at break, and Young's modulus.

Influence of pH on the release of an active principle from 3D printed carrageenan-k combined with alginate or xanthan gum.

The use of 3D printing began to diffuse in the pharmaceutical field in recent times, since 2015, with the approval of the first 3D printed drug from the FDA. The most used materials in association with this technique in this specific scope are hydrogels, already used widely in tissue engineering to produce scaffolds used in the realization of synthetic tissues. The aim of this project was to study the influence of different pH conditions on the release of a therapeutic molecule from a Carrageenan-k combined with alginate or xanthan gum hydrogel with a high level of biocompatibility and enough mechanical resistance to be used as printing material for a 3D bioprinter. The addition of biologically active supplements without affecting the model of the 3D printing structure of the biocompatible polymers was achieved by adopting the extrusion at moderately low temperatures. This study aimed to produce the necessary percentage of hydrogels which is responsible for the release of active drugs which respect to the pH of the system. In this case, the chosen curcumin drug which exhibits active release in the pH of the small intestine is a pH value of 6.

Parity Violation Energy Difference Calculation of Atropisomers.

Enantiomers have a different energy due to the parity violation effects. Up to now, these effects are difficult to calculate and their final effect on the choice of one enantiomer in the homochirality issue is still a matter of debate. Nevertheless, many scientists support the role of this tiny energy difference in the triggering of homochirality. In this work, we studied the energy difference in atropisomers, a class of stereoisomers in which the chirality is given by the block of rotation around one bond. Atropisomers might have a low energy barrier for the interconversion and this is interesting for the equilibration of the two enantiomers and the choice of the most stable enantiomer. Moreover, structures might be extended like in the case of polymers or crystals having helical framework and thus giving an additive effect on the parity violation energy of the whole structure. The parity violation energy difference here is discussed with the correlation on the general structure of the final molecule giving a qualitative model to predict the sign of local contributions of atoms.

Mostly 3D printed chemical synthesis robot.

Thanks to the current technology derived from the open-source world of 3D printers, it is conceivable to automate some laboratory activities remotely. In fact, simple operations, such as mixing liquids or solutions, stirring, heating and sampling to control the reaction course can be easily implemented. The idea of ​​automating the chemical laboratory would have immediate advantages, for example in terms of safety. The operators will be able to remotely control the machines and in case of handling dangerous material or accidents, there would only be damage to the hardware components. Many of the process parameters can also be read with low-cost probes and devices that can be easily interfaced with microprocessors. We include for example, but not limited to, temperature, pH, redox potential, electrochemical measurements in general or the use of probes for specific analytes. In this work we wish to present our liquid sampling station able to control up to 6 reagents and a temperature controlled chemical reactor. The workstation can be used graphically with an intuitive interface written in Python. The control program is structured to have modularity and contains a built-in programming language to control the interfaces.

Carbon dioxide photoreduction in prebiotic environments.

The reduction of carbon dioxide is one of the hottest topics due to the concern of global warming. Carbon dioxide reduction is also an essential step for life's origins as photoautotrophs arose soon after Earth formation. Both the topics are of high general interest, and possibly, there could be a fruitful cross-fertilization of the two fields. Herein, we selected and collected papers related to photoreduction of carbon dioxide using compounds easily available on the Earth and considered of prebiotic relevance. This work might be useful also to scientists interested in carbon dioxide photoreduction and/or to have an overview of the techniques available.

Collection and Characterization of Wood Decay Fungal Strains for Developing Pure Mycelium Mats.

Wood decay fungi (WDF) seem to be particularly suitable for developing myco-materials due to their mycelial texture, ease of cultivation, and lack of sporification. This study focused on a collection of WDF strains that were later used to develop mycelium mats of leather-like materials. Twenty-one WDF strains were chosen based on the color, homogeneity, and consistency of the mycelia. The growth rate of each strain was measured. To improve the consistency and thickness of the mats, an exclusive method (newly patented) was developed. The obtained materials and the corresponding pure mycelia grown in liquid culture were analyzed by both thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) to evaluate the principal components and texture. TGA provided a semi-quantitative indication on the mycelia and mat composition, but it was hardly able to discriminate differences in the production process (liquid culture versus patented method). SEM provided keen insight on the mycelial microstructure as well as that of the mat without considering the composition; however, it was able to determine the hyphae and porosity dimensions. Although not exhaustive, TGA and SEM are complementary methods that can be used to characterize fungal strains based on their desirable features for various applications in bio-based materials. Taking all of the results into account, the Fomitopsis iberica strain seems to be the most suitable for the development of leather-like materials.

Computational Study of the Stability of Natural Amino Acid isomers.

The secular debate on the origin of life on our planet represents one of the open challenges for the scientific community. In this endeavour, chemistry has a pivotal role in disclosing novel scenarios that allow us to understand how the formation of simple organic molecules would be possible in the early primitive geological ages of Earth. Amino acids play a crucial role in biological processes. They are known to be formed in experiments simulating primitive conditions and were found in meteoric samples retrieved throughout the years. Understanding their formation is a key step for prebiotic chemistry. Following this reasoning, we performed a computational investigation over 100'000 structural isomers of natural amino acids. The results we have found suggest that natural amino acids are among the most thermodynamically stable structures and, therefore, one of the most probable ones to be synthesised among their possible isomers.

Pyrolytic formation and photoactivity of reactive oxygen species in a SiO 2/carbon nanocomposite from kraft lignin.

SiO 2 and carbon produced by kraft lignin pyrolyzed at 600°C can generate stable reactive oxygen species (ROS) by reaction with atmospheric oxygen. In this study, we systematically investigate the photochemistry of peroxyl radicals in carbon-supported silica (PCS) and assess its effects on the methylene blue (MB) photodegradation. Characterization revealed that the higher ROS generation ability of SiO 2/carbon under UV light irradiation was attributed to its abundant photoactive surface-oxygenated functional groups.