Accumulation and removal of Streptococcus mutans biofilm on enamel and root surfaces in vitro.

Objective: This study aimed to quantitatively investigate the accumulation of Streptococcus mutans biofilm on enamel and root surfaces and assess the amount of biofilm removal using (1) experimental toothpaste and (2) water, in a closed system of flow chamber. Methods: Eight sound premolars were embedded in epoxy resin and polished with silicon carbide grinding papers to display enamel and root surfaces. To mimic biofilm, cultures of Streptococcus mutans were prepared and grown on the tooth surfaces over night before they were exposed to either 2 liters of Milli Q water or 2 liters of 40% experimental toothpaste in the flow chamber. The amount of biofilm was measured and quantified in Fluorescence microscopy. Mean fluorescence values were recorded and analysed using Microsoft® Excel® (MS Excel 2016). Results: The ability to grow biofilm was equally present at both the enamel and root surfaces. The use of water and 40% experimental toothpaste showed a significant reduction of areas covered with biofilm on both enamel and root dentin in comparison to untreated surfaces (p < 0.01). Significantly more biofilm was removed from enamel compared to root surfaces when treated with either water and toothpaste (p < 0.01). Slightly less biofilm was removed by the use of water compared to toothpaste on both enamel and root dentin surfaces, although the differences were not statistically significant. Conclusion: The results indicate that less biofilm is removed from the root surfaces than enamel by the use of water and 40% experimental toothpaste in flow chamber. Assessing oral biofilm accumulation and monitoring biofilm formation on enamel and root dentin surfaces give oral health professionals important directions that could strenghten the significance of dental caries prevention. Improving older individuals' oral hygiene practices should therefore be considered an important measure to prevent root caries.

Endodontic sealers after exposure to chlorhexidine digluconate: An assessment of physicochemical properties.

OBJECTIVES: Final root canal irrigation should ideally maintain the physicochemical stability of root canal sealers. We seek to assess the effect of contact with 2% chlorhexidine digluconate (CHX) on the physicochemical properties of AH Plus, BioRoot™ RCS, and Pulp Canal Sealer (PCS). METHODS: Mixed sealers were placed in cylindrical teflon molds and allowed to set for 1.5x the manufacturers' setting time. Half of the specimens had their free surface in contact with CHX for the first minute of their setting period. Solubility, radiopacity, surface roughness, microhardness and wettability of the sealers were assessed up to 28 days after setting. Elemental analysis of sealer surfaces and their leachates together with pH measurements were also performed. Appropriate parametric and non-parametric analysis with post hoc tests were performed (p < 0.05). RESULTS: Exposure to CHX had no effect on solubility and radiopacity of all sealers. CHX altered the surface roughness of PCS and BioRoot RCS (p < 0.05). Contact with CHX reduced the microhardness of AH Plus and PCS (p < 0.05). AH Plus was more hydrophilic after CHX contact, whereas PCS became more hydrophobic (p < 0.05). AH Plus and PCS surfaces appeared to adsorb CHX as exhibited by chlorine peaks after contact with CHX. Sealer leachates' alkalinity was not affected. CHX increased elution of silicon and zirconium for BioRoot and zinc for PCS leachates. SIGNIFICANCE: In our study, CHX affected sealers' physicochemical properties to various extents. Further studies are needed to confirm the obtained results by investigating various final irrigation strategies and correlating to biological properties.

Antibacterial Activity of Root Repair Cements in Contact with Dentin-An Ex Vivo Study.

This study assessed the antibacterial characteristics of the dentin/material interface and dentin surfaces exposed to experimental hydraulic calcium silicate cement (HCSC) with or without bioactive glass (BG) replacement (20% or 40%) or mixed with a silver nanoparticle (SNP) solution (1 or 2 mg/mL), and Biodentine, TotalFill BC RRM putty and Intermediate Restorative Material (IRM). Human root dentin segments with test materials were assessed at 1 or 28 days. In one series, the specimens were split to expose the dentin and material surfaces. A 24 h direct contact test was conducted against three-day established Enterococcus faecalis and Pseudomonas aeruginosa monospecies biofilms. In another series, the dentin/material interface of intact specimens was exposed to biofilm membranes for 3 days and the antibacterial activity was assessed via confocal microscopy. The interface was additionally characterised. All one-day material and dentin surfaces were antibacterial. Dentin surfaces exposed to HCSC with 40% BG-replacement, Biodentine and IRM had decreased antibacterial properties compared to those of the other cements. The HCSC mixed with a 2 mg/mL SNP solution had the highest antimicrobial effect in the confocal assay. The interfacial characteristics of HCSCs were similar. The test materials conferred antibacterial activity onto the adjacent dentin. The BG reduced the antibacterial effect of dentin exposed to HCSC; a 2 mg/mL SNP solution increased the antibacterial potential for longer interaction periods (three-day exposure).

A systematic review of cancer risk among users of smokeless tobacco (Swedish snus) exclusively, compared with no use of tobacco.

The main objective of this systematic review was to assess cancer risk, and mortality after cancer diagnosis, for exclusive users of Swedish snus, compared with non-users of tobacco. We followed international standards for systematic reviews and graded our confidence in the risk estimates using the GRADE approach. Our search gave 2450 articles, of which 67 were assessed in full text against our inclusion criteria. Of these, 14 cohort-studies and one case-control study were included in the review. The studies investigated risk of cancer in the oral cavity or oropharynx (3 studies), esophagus (1 study), stomach (1 study), pancreas (2 studies), colorectum (2 studies), anus (1 study) and lung (1 study), as well as malignant lymphoma (1 study), leukemia and multiple myeloma (1 study), melanoma (1 study), any cancer (1 study) and mortality after cancer diagnosis (4 studies). Cancer risk could only be evaluated in men as there was a general lack of data for women. All included studies were evaluated to have a moderate risk of bias, mostly related to validity of exposure information. An increased risk of cancer of the esophagus, pancreas, stomach and rectum as well as an association between use of snus and increased mortality after a cancer diagnosis was reported. Our confidence in the various risk estimates varied from moderate through low to very low.

Effect of exposure conditions on chemical properties of materials for surgical endodontic procedures.

This study investigated the role of aging and changes in environmental conditions on selected properties of a prototype radiopacified calcium silicate-based cement (TZ-base) with or without incorporation of silver nanoparticles or bioactive glass, and two commercial materials, Biodentine and intermediate restorative material. Materials were immersed in ultrapure water or fetal bovine serum for 28 days and were characterized with scanning electron microscopy and energy dispersive x-ray analysis. Immersion media were either replaced weekly or not replenished at all and were assessed for alkalinity and calcium release after 1, 7, 14, 21, and 28 days; antibacterial effect against 2-day monospecies biofilms; and cytotoxicity by the 3-(4,5 dimethylthiazolyl-2-yl)-2,5-diphenyl tetrazolium bromide assay after 1, 7, or 28 days. Alkalinity, calcium release, antibacterial activity, and cell cytotoxicity increased over time when the medium was not changed but decreased with medium replenishment. Immersion in fetal bovine serum resulted in lower alkalinity, less bactericidal properties, and lower cytotoxicity of prototype cements and Biodentine than did water immersion. Biodentine and 20% bioactive glass-containing cement had overall lower alkalinity, calcium release, and antibacterial activity than TZ-base, and Biodentine was less cytotoxic than TZ-base. In conclusion, exposure conditions and cement modifications significantly affected materials' leaching properties. Exposure conditions warrant consideration when evaluating cements' clinical properties.

Silver release from dentine treated with combinations of silver diamine fluoride, potassium iodide and etching.

For individuals with very high to extremely high caries activity and poor control of daily oral hygiene, a simple treatment for arresting their caries activity is necessary. Silver Diamine Fluoride (SDF) has become increasingly common for this purpose due to its efficacy and ease of application. To avoid or reduce tooth discoloration after SDF treatment potassium iodide (KI) may be applied. However, the release of silver from SDF-treated tooth surfaces may be of concern. Thus, the aim of the present study was to quantify the amount of silver leached in both a short- and long-term perspective. In this in vitro experiment we measured the cumulative release of silver from SDF-treated dentin surfaces with and without imminent application of KI, and with and without phosphoric acid etching as pre-treatment, after 24 h and weekly for four weeks. The release of silver was highest after 24 h for all treatment groups, with a significant drop after this point. When etching was not used, the use of KI did not affect the release of silver. However, when etching was used, there was a significantly lower silver release when KI was also used compared to when KI was not used. This effect was largest for the first two weeks, after which the difference was smaller as all groups released low amounts of silver.

Oral lesions associated with daily use of snus, a moist smokeless tobacco product. A cross-sectional study among Norwegian adolescents.

OBJECTIVE: Use of snus, a moist, smokeless tobacco product, may lead to local changes in the oral mucous membrane in the area where the snus is placed. It can also cause irreversible gingival retraction. This cross-sectional study aimed to investigate the relationship between use of snus, oral mucosal lesions (snus induced lesions) and gingival retractions among adolescents in Norway. MATERIAL AND METHODS: All 18-20 years olds visiting public dental health clinics in the south-eastern region of Norway between October 2015 and December 2016 were invited to participate. All participants (n = 1363) filled in an electronic questionnaire before a clinical examination. Of these, 216 used snus daily. RESULTS: Snus induced lesions were observed in 79.2% of daily snus using participants. In adjusted regression analyses, the odds of having a more severe lesion as opposed to a less severe lesion were 1.12 times greater for each additional box of snus used in a month (p < .01). Women were 46% less likely to have a severe lesion than men (p = .03). Gingival retractions were observed in 18.4% of the participants. The odds for dental retraction were significantly higher by 34% for each year of snus use. CONCLUSIONS: Most of the adolescents using snus had snus induced lesions, whereas approximately one-fifth had gingival retractions. The severity of the lesion and gingival retraction increased with the amount of snus boxes used and the duration of the snus use, respectively.

Factors associated with initiation and use of snus among adolescents.

AIM: We investigated factors associated with the initiation and continuation of snus use in adolescents in Norway. The associations with adolescents' own educational plans, the parents' educational level(s) and tobacco habits were estimated. METHODS: In this cross-sectional questionnaire-based study, 1465 patients aged 18-20 years participated. The questionnaire was administered at regular dental examinations in the public dental health service. To assess the association between individual factors and the initiation of tobacco habits, a generalised structural equation model with random effects at the clinic level was used. Binary responses were modelled using multilevel binary logistic regression, while the number of snus boxes used per month was modelled using a multilevel Poisson regression model. RESULTS: Of current (daily and occasional) tobacco users, 85% were snus users, including dual users of both snus and cigarettes. The median age of snus initiation was 16 years. Both parental snus use and smoking were associated with an increased risk of snus initiation, snus use and a higher amount of use. An increased risk of using snus was associated with male gender and with no educational plans or planning for further vocational education. The amount of snus used was higher among current snus users with a prior smoking history and among those planning for further vocational education. CONCLUSIONS: These findings may aid in developing and targeting tobacco prevention strategies aimed at young people. Tobacco prevention measures should start at the elementary school level. The strong association with parental tobacco habits underlines the importance of parents' influence on their children's tobacco use.

Use of Swedish smokeless tobacco during pregnancy: A systematic review of pregnancy and early life health risk.

BACKGROUND AND AIMS: Smokeless tobacco is a heterogeneous product group with diverse composition and prevalence globally. Tobacco use during pregnancy is concerning due to the risk of adverse pregnancy outcomes and effects on child health. Nicotine may mediate several of these effects. This systematic review measured health outcomes from Swedish smokeless tobacco (snus) use during pregnancy. METHOD: Literature search was conducted by an information specialist in May 2022. We included human studies of snus use during pregnancy compared with no tobacco use, assessed risk of bias, conducted a meta-analysis and assessed confidence in effect-estimates using Grading of Recommendations, Assessment, Development and Evaluations (GRADE). RESULTS: We included 18 cohort studies (42 to 1 006 398 participants). Snus use during pregnancy probably (moderate confidence in risk estimates) increase the risk of neonatal apnea, adjusted odds ratio 95% confidence interval [aOR (95% CI)] 1.96 (1.30 to 2.96). Snus use during pregnancy possibly (low confidence in risk estimates) increase the risk of stillbirths aOR 1.43 (1.02 to 1.99), extremely premature births aOR 1.69 (1.17 to 2.45), moderately premature birth aOR 1.26 (1.15 to 1.38), SGA aOR 1.26 (1.09 to 1.46), reduced birth weight mean difference of 72.47 g (110.58 g to 34.35 g reduction) and oral cleft malformations aOR 1.48 (1.00 to 2.21). It is uncertain (low confidence in risk estimates, CI crossing 1) whether snus use during pregnancy affects risk of preeclampsia aOR 1.11 (0.97 to 1.28), antenatal bleeding aOR 1.15 (0.92 to 1.44) and very premature birth aOR 1.26 (0.95 to 1.66). Risk of early neonatal mortality and altered heart rate variability is uncertain, very low confidence. Snus using mothers had increased prevalence of caesarean sections, low confidence. CONCLUSIONS: This systematic review reveals that use of smokeless tobacco (snus) during pregnancy may adversely impact the developing child.

Surface characteristics and bacterial adhesion of endodontic cements.

OBJECTIVES: To investigate the effect of inclusion of silver nano-particles (SNP) or bioactive glass (BG) on the surface characteristics and bacterial adhesion of prototype tricalcium silicate (TCS)-based cements alongside two commercial cements, under different aging periods and exposure conditions. MATERIALS AND METHODS: A basic formulation of radio-opacified TCS without (TZ-base) and with additions of SNP (0.5, 1, or 2 mg/ml) or BG (10 or 20%) was used. Biodentine and intermediate restorative material (IRM) served as reference materials. Material disks were immersed in ultrapure water or fetal bovine serum (FBS) for 1, 7, or 28 days. Surface roughness (n = 3), microhardness (n = 9), and wettability (n = 6) were analyzed by standard procedures. Adhesion of Enterococcus faecalis was assessed by fluorescence microscopy (n = 5). Data from these assays were evaluated for normality and comparisons among groups were conducted with statistical procedures (p < 0.05 for significance). RESULTS: The surface morphology of SNP- and BG-containing cements had higher roughness values than TZ-base after 28 days (p < 0.05). No differences in microhardness were observed among prototype cements (p > 0.05). Biodentine presented smooth surface characteristics and the highest hardness values (p < 0.05). The FBS-immersion resulted in surface reactions in prototype materials and Biodentine, depicted with scanning electron microscopy. All 1- and 7-day prototype cements showed negligible bacterial adhesion, while in Biodentine and IRM, noticeable E. faecalis adherence was observed from day 1 (p < 0.05). CONCLUSIONS: Incorporation of SNP or BG did not improve the antibacterial effect of the experimental cement; all 28-day aged materials failed to inhibit bacterial adherence. The measured physical parameters did not appear to be related to the degree of bacterial adhesion. Exposure of TCS-based cements in FBS resulted in surface reactions, which did not affect bacterial adhesion. CLINICAL RELEVANCE: Changes in the surface characteristics of prototype TCS-based cements by inclusion of SNP and BG or exposure to different environments did not affect bacterial adhesion. All experimental materials showed inferior physical properties and higher antibacterial effect than Biodentine.

Photoactive Zr-aromatic hybrid thin films made by molecular layer deposition.

The principle of antimicrobial photodynamic therapy (PDT) is appealing because it can be controlled by an external light source and possibly the use of durable materials. However, to utilise such surfaces requires a process for their production that allows for coating on even complex geometries. We have therefore explored the ability of the emerging molecular layer deposition (MLD) technique to produce and tune PDT active materials. This study demonstrates how the type of aromatic ligand influences the optical and antimicrobial properties of photoactive Zr-organic hybrid thin films made by MLD. The three aromatic dicarboxylic acids: 2,5-dihydroxy-1,4-benzenedicarboxylic acid, 2-amino-1,4-benzenedicarboxylic acid and 2,6-naphthalenedicarboxylic acid have been combined with ZrCl4 to produce hybrid coatings. The first system has not been previously described by MLD and is therefore more thoroughly investigated using in situ quartz crystal microbalance (QCM), Fourier transform infrared (FTIR) and UV-Vis spectroscopy. The antibacterial phototoxic effects of Zr-organic hybrids have been explored in the Staphylococcus aureus bacteria model using a UVA/blue light source. Films based on the 2,6-naphthalenedicarboxylic acid linker significantly reduced the number of viable bacteria by 99.9%, while no apparent activity was observed for the two other photoactive systems. Our work thus provides evidence that the MLD technique is a suitable tool to produce high-quality novel materials for possible applications in antimicrobial PDT, however it requires a careful selection of aromatic ligands used to construct photoactive materials.

Potential of «universal¼ bonding agents for composite repair.

Aim: The aim of this in vitro study was to compare nine different bonding agents of so-called universal type with one well-recognized, 3-step etch-and-rinse bonding agent, as control, in a composite-to-composite shear bond strength (SBS) test. Materials and methods: Cylindrical composite substrates were made according to manufacturers' specifications and potted in epoxy according to the description in ISO TS 29022:2003. They were stored in water (37 °C) for 2 months (for water sorption). New composite was bonded to the substrates using nine different bonding agents of universal type, and one 3-step etch-and-rinse bonding agent as control. Fifteen specimens were made for each bonding agent as required by ISO 29022. SBS testing was performed as described in the standard. Vertical load was applied at the speed of 1 mm/min, using a universal testing machine. Two test series were performed: (A) Short term test of SBS after 2 weeks (B) Long term test of SBS after 1-year storage of specimens in water at 37 °C. Results: Test results for the short term test (A); composite-to-composite SBS mean values ranged from 12.0 to 24.9 MPa, and for the long term test (B), SBS ranged from 11.4 to 25 MPa. Six universal bonding agents showed significantly higher bond strength than control in 1-year test. Conclusion: In this in vitro study, testing shear bond strength of composite-to-composite bonding, the universal bonding agents performed similar and for some agents better than the 3-step etch-and-rinse bonding agent. New simplified bonding procedures seem reliable for repair of composite.

Protein-coated nanostructured surfaces affect the adhesion of Escherichia coli.

Developing new implant surfaces with anti-adhesion bacterial properties used for medical devices remains a challenge. Here we describe a novel study investigating nanotopography influences on bacterial adhesion on surfaces with controlled interspatial nanopillar distances. The surfaces were coated with proteins (fibrinogen, collagen, serum and saliva) prior to E. coli-WT adhesion under flow conditions. PiFM provided chemical mapping and showed that proteins adsorbed both between and onto the nanopillars with a preference for areas between the nanopillars. E. coli-WT adhered least to protein-coated areas with low surface nanopillar coverage, most to surfaces coated with saliva, while human serum led to the lowest adhesion. Protein-coated nanostructured surfaces affected the adhesion of E. coli-WT.

Polycyclic aromatic hydrocarbons (PAHs) may explain the paradoxical effects of cigarette use on preeclampsia (PE).

Tobacco smoking and use of snus (smokeless tobacco) are associated with adverse effects on pregnancy and neonatal outcomes. Nicotine is considered a key toxicant involved in effects caused by both smoking and snus, while pyrolysis products including polycyclic aromatic hydrocarbons (PAHs) in cigarette smoke represents the constituents most unequally divided between these two groups of tobacco products. The aim of this review was: i) to compare the impact, in terms of relative effect estimates, of cigarette smoking and use of Swedish snus on pregnancy outcomes using similar non-tobacco user controls, and ii) to examine whether exposure to PAHs from smoking could explain possible differences in impact on pregnancy outcomes. We systematically searched MEDLINE, Embase, PsycInfo, Web of Science and the Cochrane Database of Systematic Reviews up to October 2021 and identified studies reporting risks for adverse pregnancy and neonatal outcomes associated with snus use and with smoking relative to pregnant women with no use of tobacco. Both snus use and smoking were associated with increased risk of stillbirth, preterm birth, and oral cleft malformation, with comparable point estimates. These effects were likely due to comparable nicotine exposure. We also found striking differences. While both smoking and snus increased the risk of having small for gestational age (SGA) infants, risk from maternal smoking was markedly higher as was the reduction in birthweight. In contrast, the risk of preeclampsia (PE) was markedly lower in smokers than in controls, while snus use was associated with a slightly increased risk. We suggest that PAHs acting via AhR may explain the stronger effects of tobacco smoking on SGA and also to the apparent protective effect of cigarette smoking on PE. Possible mechanisms involved include: i) disrupted endocrine control of fetal development as well as placental development and function, and ii) stress adaption and immune suppression in placenta and mother.

Effect of chlorhexidine digluconate on antimicrobial activity, cell viability and physicochemical properties of three endodontic sealers.

OBJECTIVE: Assess the biological and physicochemical properties of AH Plus, BioRoot RCS and Pulp Canal Sealer (PCS) leachates with and without chlorhexidine (CHX). METHODS: The sealers were studied in no contact and 1-minute contact with CHX. For biological properties (antibacterial activity and cytotoxicity), leachates were formed in saline of freshly mixed, 1-, 7- and 28 days set sealers. The antibacterial properties of sealer leachates were investigated for planktonic and biofilm growth of E. faecalis, S. mutans, S.epidermidis and S.aureus. The 3-(4,5 dimethylthiazolyl-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay was used to evaluate murine fibroblast cell viability after exposure to the leachates. The physical properties (water uptake, sorption, solubility, porosity, surface characteristics) of sealers and the pH of the immersion liquid (saline or distilled water) were also assessed over a 28-days period. RESULTS: CHX improved the antibacterial properties of the sealer leachates and reduced cell viability for all sealer leachates, except for freshly mixed PCS. BioRoot RCS leachates presented the highest antibacterial properties and cell viability with and without CHX contact. PCS was the material most affected by CHX in terms of physical properties, whereas for AH Plus, solubility was increased. CHX did not affect the physical properties of BioRoot RCS, except for solubility that was decreased. CHX contact did not change sealers' alkalinity in distilled water whereas it increased it for AH Plus and BioRoot RCS in saline. SIGNIFICANCE: CHX improved the antibacterial efficacy of sealer leachates and either compromised or did not affect cell viability. CHX affected to various extent sealers' physicochemical properties.

The dentine-sealer interface: Modulation of antimicrobial effects by irrigation.

AIM: Assess whether sodium hypochlorite (NaOCl) or chlorhexidine (CHX) and two irrigation protocols may alter the antibacterial properties of dentine and three endodontic sealers using a novel ex vivo tooth model. METHODOLOGY: Prior to antibacterial testing, the tooth model was validated by means of scanning electron microscopy (SEM) to evaluate the separation between dentine and sealer surfaces. Root blocks prepared from extracted human roots were pre-treated with 17% EDTA + 0.9% saline and subsequently treated with 1% NaOCl (G1), 2% CHX (G2) or no irrigant (G3). Two irrigation protocols were further investigated, "1% NaOCl + 17% EDTA" (P1) and "1% NaOCl + 17% EDTA + 2% CHX" (P2). Following irrigation, the root blocks were either filled with AH Plus, BioRoot RCS and Pulp Canal Sealer (PCS), or left empty. All groups were incubated for 1, 7 and 28 days. Direct contact tests for planktonic E. faecalis and 48 h E. faecalis biofilms were performed at the level of dentine and sealer surfaces. Statistical analysis was performed on the bacterial survival between irrigants (G1, G2 and G3) and between irrigation protocols (P1 and P2); p < .05. RESULTS: The model was considered reproducible as SEM examination of dentine samples indicated consistent separation between dentine and sealer surfaces. Irrigation with CHX (G2) and irrigation protocol P2 enhanced the antibacterial properties of dentine without sealer application as well as dentine in contact with all three sealers tested, especially against planktonic E. faecalis. G2 and P2 also improved the antibacterial effect of AH Plus surfaces for all three incubation times. No irrigation groups (G1, G2) or irrigation protocols (P1, P2) altered the antibacterial properties of BioRoot RCS surfaces against planktonic bacteria or biofilms. Only BioRoot RCS surfaces eliminated the planktonic E. faecalis in all irrigation groups (G1, G2, G3) and protocols (P1, P2) investigated whilst PCS surfaces eliminate E. faecalis in biofilms in all groups up to 7 days. CONCLUSIONS: The tooth model was reproducible. CHX improved the antibacterial activity upon both sealer and dentine surfaces. Amongst sealers, BioRoot RCS was less affected by NaOCl and CHX, and exhibited high antibacterial properties regardless the irrigation applied.

Molecular layer deposition of photoactive metal-naphthalene hybrid thin films.

We here report on photoactive organic-inorganic hybrid thin films prepared by the molecular layer deposition (MLD) method. The new series of hybrid films deposited using 2,6-naphthalenedicarboxylic acid (2,6-NDC) and either hafnium chloride (HfCl4), yttrium tetramethylheptanedionate (Y(thd)3) or titanium chloride (TiCl4) were compared with the known zirconium chloride (ZrCl4) based system. All metal-naphthalene films are amorphous as-deposited and show self-saturating growth as expected for an ideal MLD process with varied growth rates depending on the choice of metal precursor. The growth was studied in situ using quartz crystal microbalance (QCM) and the films were further characterised using spectroscopic ellipsometry (SE), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and UV-Vis and photoluminescence (PL) spectroscopy to obtain information on their physicochemical properties. The hybrid thin films display intense blue photoluminescence, except for the Ti-organic complex in which titanium clusters were found to be an effective PL quencher for the organic linker. We demonstrate how the optical properties of the films depend on the choice of metal component to make a foundation for further studies on these types of organic-inorganic hybrid materials for applications as photoactive agents.

Survival of primary molars with pulpotomy interventions: public oral health practice-based study in Helsinki.

OBJECTIVES: To assess long-term survival of pulpotomized primary molars and factors related to the survival of the teeth. MATERIALS AND METHODS: This retrospective longitudinal study was based on electronic dental health records of children who attended public health service. Eligible children were <12 years and had a pulpotomy procedure code in their dental treatment history. Data were obtained in the period between 2002 and 2016. Chi-squared test, t-test, and one-way ANOVA were used to assess for statistical differences. Kaplan-Meier analyses were performed to create survival estimates, and the log-rank test was performed to compare differences in survival distributions. A multivariate Cox regression was conducted, and hazard ratios were calculated to estimate the hazard rate for failure. RESULTS: Of interventions, 40% were registered in children 3-6 years of age; 56% were boys. Mean estimated survival of such molars was 82 months (SEM = 0.6) and differed by dental operator's work setting and choice of restorative materials used after pulpotomy intervention. Using a stainless steel crown (SSC) to restore pulp-intervened primary molars had the strongest effect on survival (111 months with SEM = 1.8), followed by if the intervention was performed by a specialist or specializing dentist in paediatric dentistry (99 months with SEM = 2.6). CONCLUSIONS: The estimated survival time of pulpotomized primary molars is affected by dental operator-related factors, which should be considered in management of extensively carious primary molars of paediatric patients, both at the clinical and organizational decision-making levels. An increased focus on the use of SSC is recommended to be in the learning objectives of dental education programs.

In vitro abrasivity and chemical properties of charcoal-containing dentifrices.

OBJECTIVE: Charcoal-containing dentifrices are gaining popularity, but scientific information on their effect on oral health is scarce. This study investigated properties of dentifrices that may affect dentine abrasivity, as well as their ability to adsorb fluoride, their pH and the presence of harmful substances. MATERIALS AND METHODS: The dentifrices NAO and COCO were subjected to the following analyses: abrasivity, expressed as mean abraded depth and relative dentin abrasivity (RDA), and surface roughness of extracted human molars (n = 30) after simulated brushing; fluoride adsorption measured as concentration change; pH measurements; detection of polycyclic aromatic hydrocarbons by gas chromatography-mass spectrometry. The products were compared to a reference dentifrice (Colgate® MaxWhite), positive controls (ISO dentifrice slurry, activated charcoal for laboratory use) and a negative control (distilled water). RESULTS: The mean abraded depths of NAO and COCO were not different (p > .05), but higher than the reference dentifrice and the negative control (p < .05). The RDA values of NAO, COCO and the ISO dentifrice slurry were higher than the reference dentifrice value (p < .05) by up to 10 times. The dentine surface roughness was higher after brushing with NAO, COCO and ISO dentifrice slurry compared to distilled water (p < .05). No change in mean adsorbed fluoride concentration was observed after 24 h (p > .05). Both NAO and COCO were alkaline (pH > 7). Analysis of NAO revealed the presence of naphthalene (112.8 ± 2.0 ng/mL). CONCLUSION: The charcoal-containing dentifrices were abrasive within acceptable limits set by ISO and did not adsorb fluoride. The presence of naphthalene in one product is a cause for concern.