RESUMEN
The combustion and pyrolysis behaviors of light esters and fatty acid methyl esters have been widely studied due to their relevance as biofuel and fuel additives. However, a knowledge gap exists for midsize alkyl acetates, especially ones with long alkoxyl groups. Butyl acetate, in particular, is a promising biofuel with its economic and robust production possibilities and ability to enhance blendstock performance and reduce soot formation. However, it is little studied from both experimental and modeling aspects. This work created detailed oxidation mechanisms for the four butyl acetate isomers (normal-, sec-, tert-, and iso-butyl acetate) at temperatures varying from 650 to 2000 K and pressures up to 100 atm using the Reaction Mechanism Generator. About 60% of species in each model have thermochemical parameters from published data or in-house quantum calculations, including fuel molecules and intermediate combustion products. Kinetics of essential primary reactions, retro-ene and hydrogen atom abstraction by OH or HO2, governing the fuel oxidation pathways, were also calculated quantum-mechanically. Simulation of the developed mechanisms indicates that the majority of the fuel will decompose into acetic acid and relevant butenes at elevated temperatures, making their ignition behaviors similar to butenes. The adaptability of the developed models to high-temperature pyrolysis systems was tested against newly collected high-pressure shock experiments; the simulated CO mole fraction time histories have a reasonable agreement with the laser measurement in the shock tube. This work reveals the high-temperature oxidation chemistry of butyl acetates and demonstrates the validity of predictive models for biofuel chemistry established on accurate thermochemical and kinetic parameters.
RESUMEN
A new shock tube facility has been designed, constructed, and characterized at the University of Central Florida. This facility is capable of withstanding pressures of up to 1000 atm, allowing for combustion diagnostics of extreme conditions, such as in rocket combustion chambers or in novel power conversion cycles. For studies with toxic gas impurities, the high initial pressures required the development of a gas delivery system to ensure the longevity of the facility and the safety of the personnel. Data acquisition and experimental propagation were implemented with remote access to ensure safety, paired with a LabVIEW- and Python-based user interface. Thus far, test pressures of 270 atm, blast pressures of 730 atm, and temperatures approaching 10 000 K have been achieved. The extreme limitations of this facility allow for emission spectroscopy to be performed during the oxidation of fuel mixtures, e.g., alkanes diluted in argon and carbon dioxide. Ignition delay times were determined and compared to simulations using chemical kinetic mechanisms. The design, experimental procedures, processes of analysis, and uncertainty determination are outlined, and typical pressure profiles are compared with a new gas dynamics solver and empirical correlations developed across multiple shock tube facilities. Preliminary reactive mixture analyses are included with further investigation of the mixtures outlined.
RESUMEN
Polarization- and incident-angle-independent narrow-band terahertz (THz) absorbers were developed to enable THz imaging, radar, and spectroscopy applications. The design comprises a transparent fused silica (SiOx) substrate backed by an optically thick metal layer and topped by a periodic array of metal cross patterns. Finite element analysis (FEA) simulations optimized the geometry of devices fabricated by contact photolithography. Resonances were characterized by Fourier-transform reflectance spectroscopy. The design tunable absorption bands appeared in the range 50-200â cm-1 (1.5-6â THz) with full widths at half maximum of 20-56â cm-1 (0.6-1.68â THz). Maximum absorption was -8.5 to -16.8â dB. The absorption bands are independent of incidence angle and polarization in agreement with simulation.
RESUMEN
This work demonstrates a thermometric technique using laser-induced fluorescence (LIF) in supercritical carbon dioxide flows in a micro-channel. Rhodamine 6G was used as a temperature-sensitive fluorescent dye. The flow conditions were at a pressure of 7.9 MPa and temperature in the range of 23°-90°C. 2D spatial distributions and time-resolved temperature profiles were obtained at this high pressure. Measured LIF signals showed close relations to the temperatures obtained from resistance temperature detectors.
RESUMEN
Fentanyl is a potent synthetic opioid pain reliever with a high bioavailability that can be used as prescription anesthetic. Rapid identification via non-contact methods of both known and emerging opioid substances in the fentanyl family help identify the substances and enable rapid medical attention. We apply PBEh-3c method to identify vibrational normal modes from 0.01 to 3 THz in solid fentanyl and its selected analogs. The molecular structure of each fentanyl analog and unique arrangement of H-bonds and dispersion interactions significantly change crystal packing and is subsequently reflected in the THz spectrum. Further, the study of THz spectra of a series of stereoisomers shows that small changes in molecular structure results in distinct crystal packing and significantly alters THz spectra as well. We discuss spectral features of synthetic opioids with higher potency than conventional fentanyl such as ohmefentanyl and sufentanil and discover the pattern of THz spectra of fentanyl analogs.
RESUMEN
Biofuels are a promising ecologically viable and renewable alternative to petroleum fuels, with the potential to reduce net greenhouse gas emissions. However, biomass sourced fuels are often produced as blends of hydrocarbons and their oxygenates. Such blending complicates the implementation of these fuels in combustion applications. Variations in a biofuel's composition will dictate combustion properties such as auto ignition temperature, reaction delay time, and reaction pathways. A handful of novel drop-in replacement biofuels for conventional transportation fuels have recently been down selected from a list of over 10,000 potential candidates as part of the U.S. Department of Energy's (DOE) Co-Optimization of Fuels and Engines (Co-Optima) initiative. Diisobutylene (DIB) is one such high-performing hydrocarbon which can readily be produced from the dehydration and dimerization of isobutanol, produced from the fermentation of biomass-derived sugars. The two most common isomers realized, from this process, are 2,4,4-trimethyl-1-pentene (α-DIB) and 2,4,4-trimethyl-2-pentene (ß-DIB). Due to a difference in olefinic bond location, the α- and ß- isomer exhibit dramatically different ignition temperatures at constant pressure and equivalence ratio. This may be attributed to different fragmentation pathways enabled by allylic versus vinylic carbons. For optimal implementation of these biofuel candidates, explicit identification of the intermediates formed during the combustion of each of the isomers is needed. To investigate the combustion pathways of these molecules, tunable vacuum ultraviolet (VUV) light (in the range 8.1-11.0 eV) available at the Lawrence Berkeley National Laboratory's Advanced Light Source (ALS) has been used in conjunction with a jet stirred reactor (JSR) and time-of-flight mass spectrometry to probe intermediates formed. Relative intensity curves for intermediate mass fragments produced during this process were obtained. Several important unique intermediates were identified at the lowest observable combustion temperature with static pressure of 93,325 Pa and for 1.5 s residence time. As this relatively short residence time is just after ignition, this study is targeted at the fuels' ignition events. Ignition characteristics for both isomers were found to be strongly dependent on the kinetics of C4 and C7 fragment production and decomposition, with the tert-butyl radical as a key intermediate species. However, the ignition of α-DIB exhibited larger concentrations of C4 compounds over C7, while the reverse was true for ß-DIB. These identified species will allow for enhanced engineering modeling of fuel blending and engine design.
RESUMEN
Fentanyl is an anesthetic with a high bioavailability and is the leading cause of drug overdose death in the U.S. Fentanyl and its derivatives have a low lethal dose and street drugs which contain such compounds may lead to death of the user and simultaneously pose hazards for first responders. Rapid identification methods of both known and emerging opioid fentanyl substances is crucial. In this effort, machine learning (ML) is applied in a systematic manner to identify fentanyl-related functional groups in such compounds based on their observed spectral properties. In our study, accurate infrared (IR) spectra of common organic molecules which contain functional groups that are constituents of fentanyl is determined by investigating the structure-property relationship. The average accuracy rate of correctly identifying the functional groups of interest is 92.5% on our testing data. All the IR spectra of 632 organic molecules are from National Institute of Standards and Technology (NIST) database as the training set and are assessed. Results from this work will provide Artificial Intelligence (AI) based tools and algorithms increased confidence, which serves as a basis to detect fentanyl and its derivatives.
RESUMEN
Soot emissions in combustion are unwanted consequences of burning hydrocarbon fuels. The presence of soot during and following combustion processes is an indication of incomplete combustion and has several negative consequences including the emission of harmful particulates and increased operational costs. Efforts have been made to reduce soot production in combustion engines through utilizing oxygenated biofuels in lieu of traditional nonoxygenated feedstocks. The ongoing Co-Optimization of Fuels and Engines (Co-Optima) initiative from the US Department of Energy (DOE) is focused on accelerating the introduction of affordable, scalable, and sustainable biofuels and high-efficiency, low-emission vehicle engines. The Co-Optima program has identified a handful of biofuel compounds from a list of thousands of potential candidates. In this study, a shock tube was used to evaluate the performance of soot reduction of five high-performance biofuels downselected by the Co-Optima program. Current experiments were performed at test conditions between 1,700 and 2,100 K and 4 and 4.7 atm using shock tube and ultrafast, time-resolve laser absorption diagnostic techniques. The combination of shock heating and nonintrusive laser detection provides a state-of-the-art test platform for high-temperature soot formation under engine conditions. Soot reduction was found in ethanol, cyclopentanone, and methyl acetate; conversely, an α-diisobutylene and methyl furan produced more soot compared to the baseline over longer test times. For each biofuel, several reaction pathways that lead towards soot production were identified. The data collected in these experiments are valuable information for the future of renewable biofuel development and their applicability in engines.
RESUMEN
Reactions of the hydrogen atom and the oxygen molecule are among the most important ones in the hydrogen and hydrocarbon oxidation mechanisms, including combustion in a supercritical CO2 (sCO2) environment, known as oxy-combustion or the Allam cycle. Development of these energy technologies requires understanding of chemical kinetics of H + O2 â HO + O and H + O2 â HO2 in high pressures and concentrations of CO2. Here, we combine quantum treatment of the reaction system by the transition state theory with classical molecular dynamics simulation and the multistate empirical valence bonding method to treat environmental effects. Potential of mean force in the sCO2 solvent at various temperatures 1000-2000 K and pressures 100-400 atm was obtained. The reaction rate for H + O2 â HO + O was found to be pressure-independent and described by the extended Arrhenius equation 4.23 × 10-7 T-0.73 exp(-21 855.2 cal/mol/RT) cm3/molecule/s, while the reaction rate H + O2 â HO2 is pressure-dependent and can be expressed as 5.22 × 10-2 T-2.86 exp(-7247.4 cal/mol/RT) cm3/molecule/s at 300 atm.
RESUMEN
Fossil fuel oxy-combustion is an emerging technology where the habitual nitrogen diluent is replaced by high-pressure supercritical CO2 (sCO2), which increases the efficiency of energy conversion. In this study, the chemical kinetics of the combustion reaction C2H6 â CH3 + CH3 in the sCO2 environment is predicted at 30-1000 atm and 1000-2000 K. We adopt a multiscale approach, where the reactive complex is treated quantum mechanically in rigid rotor/harmonic oscillator approximation, while environment effects at different densities are taken into account by the potential of mean force, produced with classical molecular dynamics (MD). Here, we used boxed MD, where enhanced sampling of infrequent events of barrier crossing is accomplished without application of the bias potential. The multistate empirical valence bond model is applied to describe free radical formation accurately at the cost of the classical force field. Predicted rates at low densities agree well with the literature data. Rate constants at 300 atm are 2.41 × 1014 T-0.20 exp(-77.03 kcal/mol/ RT) 1/s for ethane dissociation and 8.44 × 10-19 T1.42 exp(19.89 kcal/mol/ RT) cm3/molecule/s for methyl-methyl recombination.
RESUMEN
Triethyl phosphate (TEP) is an organophosphorus compound used as a simulant for highly toxic nerve agents such as sarin GB. A high temperature decomposition pathway during TEP pyrolysis has been proposed previously and takes place via seven concerted elimination reactions. A computational study to investigate the kinetics of these seven reactions was carried out at the CBS-QB3 level of theory. The transition state optimization was done at the B3LYP/6-311G(2d,d,p) theory level, and CanTherm was used to derive the Arrhenius coefficients. The pre-exponential factors of the rate constant of these reactions were found to be up to 50 times lower than the estimated values from the literature. In addition, kinetics of reaction of the trioxidophosphorus radical (PO3) with H2 (H2 + PO3 â HOPO2 + H), which is one of the important reactions in predicting CO formation during TEP decomposition, was also investigated computationally at the same theory level. The new kinetic parameters derived from the computational study were used with the TEP kinetic model proposed recently by our group. In addition, an alternative decomposition pathway for TEP decomposition via H-abstraction, radical decomposition, and recombination reactions was added. The proposed mechanism was validated with the literature's experimental data, that is, intermediate CO time-history data from pyrolysis and oxidation experiments and ignition delay times. Fairly good agreement with experiments was obtained for pyrolysis and oxidation CO yield within 1200-1700 K. The model was able to predict the ignition times of the rich TEP mixture (φ = 2) within 25% of the experimental results, while the discrepancies for stoichiometric and rich mixtures were larger. Discussions on results of sensitivity and reaction pathway analysis are presented to identify the important phosphorus reactions and to understand the effect of addition of the alternative TEP decomposition pathway.
RESUMEN
We demonstrate time-resolved temperature measurements in shock-heated mixtures of carbon monoxide over a temperature range of 1000-1800 K for two pressure ranges, 2.0-2.9 atm and 7.6-10.7 atm, at rates up to 250 kHz using a single acousto-optically modulated quantum cascade laser with mid-infrared output spanning from 1975 to 2260 cm-1. Measured temperatures were in excellent agreement with values determined by ideal shock relations, and the temperature profile after the passage of the reflected shock wave was found to be well-modeled by an isentropic compression assumption. Temperature measurements made with this setup are largely immune to effects of emissions and beam steering, making the diagnostic system well-suited for studying high-temperature gas-phase reactions of energetic materials such as octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine and hexahydro-1,3,5-trinitro-1,3,5-triazine.
RESUMEN
Fossil fuel oxy-combustion is an emergent technology where habitual nitrogen diluent is replaced by high pressure (supercritical) carbon dioxide. The supercritical state of CO2 increases the efficiency of the energy conversion and the absence of nitrogen from the reaction mixture reduces pollution by NOx. However, the effects of a supercritical environment on elementary reactions kinetics are not well understood at present. We used boxed molecular dynamics simulations at the QM/MM theory level to predict the kinetics of dissociation/recombination reaction HCO⢠+ [M] â H⢠+ CO + [M], an important elementary step in many combustion processes. A wide range of temperatures (400-1600 K) and pressures (0.3-1000 atm) were studied. Potentials of mean force were plotted and used to predict activation free energies and rate constants. Based on the data obtained, extended Arrhenius equation parameters were fitted and tabulated. The apparent activation energy for the recombination reaction becomes negative above 30 atm. As the temperature increased, the pressure effect on the rate constant decreased. While at 400 K the pressure increase from 0.3 atm to 300 atm accelerated the dissociation reaction by a factor of 250, at 1600 K the same pressure increase accelerated this reaction by a factor of 100. Graphical abstract Formyl radical surrounded by carbon dioxide molecules.
RESUMEN
We investigated the reaction rates of OH + CO â H + CO2 in supercritical CO2 environment with and without additional CO2 molecule included in reactive complex. Ab initio potential energy surfaces previously reported a lower activation barrier and hence a catalytic effect of additional CO2 molecule. Here we solve the steady-state unimolecular master equations based on the Rice-Ramsperger-Kassel-Marcus theory (RRKM) and compare the rates for the two mechanisms. We found that the alternative reaction mechanism becomes faster at high pressure and low temperature, when the concentration of prereactive complex with additional CO2 molecule becomes appreciable. Therefore, this catalytic effect may be important for the chemical processes in CO2 solvent but is unlikely to play a role during combustion.
RESUMEN
The kinetics of reaction CH3 + HO2 â CH3O + OH in supercritical carbon dioxide media at pressures from 0.3 to 1000 atm in the temperature range (600-1600) K was studied using boxed molecular dynamics simulations at QM/MM theory level with periodical boundary conditions. The mechanism of this process includes two consecutive steps: formation and decomposition of CH3OOH intermediate. We calculated the activation free energies and rate constants of each step, then used Bodenstein's quasistationary concentrations approximation to estimate the rate constants of the reaction. On the basis of the temperature dependence of the rate constants, parameters in the extended Arrhenius equation were determined. We found that reaction rate of each step, as well as overall reaction, increases with increasing CO2 pressure in the system. The most effective zone for the process is T = 1000-1200 K, and the CO2 pressure is about 100 atm.
RESUMEN
Pyrolysis and oxidation of triethyl phosphate (TEP) were performed in the reflected shock region at temperatures of 1462-1673 K and 1213-1508 K, respectively, and at pressures near 1.3 atm. CO concentration time histories during the experiments were measured using laser absorption spectroscopy at 4580.4 nm. Experimental CO yields were compared with model predictions using the detailed organophosphorus compounds (OPC) incineration mechanism from the Lawrence Livermore National Lab (LLNL). The mechanism significantly underpredicts CO yield in TEP pyrolysis. During TEP oxidation, predicted rate of CO formation was significantly slower than the experimental results. Therefore, a new improved kinetic model for TEP combustion was developed, which was built upon the AramcoMech2.0 mechanism for C0-C2 chemistry and the existing LLNL submechanism for phosphorus chemistry. Thermochemical data of 40 phosphorus (P)-containing species were reevaluated, either using recently published group values for P-containing species or by quantum chemical calculations (CBS-QB3). The new improved model is in better agreement with the experimental CO time histories within the temperature and pressure conditions tested in this study. Sensitivity analysis was used to identify important reactions affecting CO formation, and future experimental/theoretical studies on kinetic parameters of these reactions were suggested to further improve the model. To the best of our knowledge, this is the first study of TEP kinetics in a shock tube under these conditions and the first time-resolved laser-based species time history data during its pyrolysis and oxidation.
RESUMEN
Oxy-fuel combustion technology holds a great promise in both increasing the efficiency of the energy conversion and reducing environmental impact. However, effects of the higher pressures and replacement of the nitrogen with carbon dioxide diluent are not well understood at present. The title reaction is one of the most important processes in combustion. Despite numerous studies, the effects of supercritical carbon dioxide environment did not receive much attention in the past. Here we report the results of boxed molecular dynamics simulations of these effects at QM/MM theory level with periodical boundary conditions. The free energy barriers for HOCO intermediate formation and decomposition were tabulated in a wide range of pressures (1-1000 atm) and temperatures (400-1600 K). Pressure dependence of calculated rate constants for these reaction steps and overall reaction were analyzed. We found that the CO2 environment may increase these rate constants up to a factor of 25, at near critical conditions. At higher temperatures, this effect weakens significantly. Numerical values for parameters of extended Arrhenius equation, suitable for combustion kinetic modeling are reported.
RESUMEN
The supercritical carbon dioxide diluent is used to control the temperature and to increase the efficiency in oxycombustion fossil fuel energy technology. It may affect the rates of combustion by altering mechanisms of chemical reactions, compared to the ones at low CO2 concentrations. Here, we investigate potential energy surfaces of the four elementary reactions in the CH3 + O2 reactive system in the presence of one CO2 molecule. In the case of reaction CH3 + O2 â CH2O + OH (R1 channel), van der Waals (vdW) complex formation stabilizes the transition state and reduces the activation barrier by â¼2.2 kcal/mol. Alternatively, covalently bonded CO2 may form a six-membered ring transition state and reduce the activation barrier by â¼0.6 kcal/mol. In case of reaction CH3 + O2 â CH3O + O (R2 channel), covalent participation of CO2 lowers the barrier for the rate limiting step by 3.9 kcal/mol. This is expected to accelerate the R2 process, important for the branching step of the radical chain reaction mechanism. For the reaction CH3 + O2 â CHO + H2O (R3 channel) with covalent participation of CO2, the activation barrier is lowered by 0.5 kcal/mol. The reaction CH2O + OH â CHO + H2O (R4 channel) involves hydrogen abstraction from formaldehyde by OH radical. Its barrier is reduced from 7.1 to 0.8 kcal/mol by formation of vdW complex with spectator CO2. These new findings are expected to improve the kinetic reaction mechanism describing combustion processes in supercritical CO2 medium.
RESUMEN
In oxy-fuel combustion, the pure oxygen (O2), diluted with CO2 is used as oxidant instead air. Hence, the combustion products (CO2 and H2O) are free from pollution by nitrogen oxides. Moreover, high pressures result in the near-liquid density of CO2 at supercritical state (sCO2). Unfortunately, the effects of sCO2 on the combustion kinetics are far from being understood. To assist in this understanding, in this work we are using quantum chemistry methods. Here we investigate potential energy surfaces of important combustion reactions in the presence of the carbon dioxide molecule. All transition states and reactant and product complexes are reported for three reactions: H2CO + HO2 â HCO + H2O2 (R1), 2HO2 â H2O2 + O2 (R2), and CO + OH â CO2 + H (R3). In reaction R3, covalent binding of CO2 to the OH radical and then the CO molecule opens a new pathway, including hydrogen transfer from oxygen to carbon atoms followed by CH bond dissociation. Compared to the bimolecular OH + CO mechanism, this pathway reduces the activation barrier by 5 kcal/mol and is expected to accelerate the reaction. In the case of hydroperoxyl self-reaction 2HO2 â H2O2 + O2 the intermediates, containing covalent bonds to CO2 are found not to be competitive. However, the spectator CO2 molecule can stabilize the cyclic transition state and lower the barrier by 3 kcal/mol. Formation of covalent intermediates is also discovered in the H2CO + HO2 â HCO + H2O2 reaction, but these species lead to substantially higher activation barriers, which makes them unlikely to play a role in hydrogen transfer kinetics. The van der Waals complexation with carbon dioxide also stabilizes the transition state and reduces the reaction barrier. These results indicate that the CO2 environment is likely to have a catalytic effect on combustion reactions, which needs to be included in kinetic combustion mechanisms in supercritical CO2.
RESUMEN
We report on potential energies for the transition state, reactant, and product complexes along the reaction pathways for hydrogen transfer reactions to hydroperoxyl radical from formaldehyde H2CO + HO2 â HCO + H2O2 and another hydroperoxyl radical 2HO2 â H2O2 + O2 in the presence of one carbon dioxide molecule. Both covalently bonded intermediates and weak intermolecular complexes are identified and characterized. We found that reactions that involve covalent intermediates have substantially higher activation barriers and are not likely to play a role in hydrogen transfer kinetics. The van der Waals complexation with carbon dioxide does not affect hydrogen transfer from formaldehyde, but it lowers the barrier for hydroperoxyl self-reaction by nearly 3 kcal/mol. This indicates that CO2 environment is likely to have catalytic effect on HO2 self-reaction, which needs to be included in kinetic combustion mechanisms in supercritical CO2.