RESUMEN
TonB-dependent transporters (TBDTs) mediate energized transport of essential nutrients into gram-negative bacteria. TBDTs are increasingly being exploited for the delivery of antibiotics to drug-resistant bacteria. While much is known about ground state complexes of TBDTs, few details have emerged about the transport process itself. In this study, we exploit bacteriocin parasitization of a TBDT to probe the mechanics of transport. Previous work has shown that the N-terminal domain of Pseudomonas aeruginosa-specific bacteriocin pyocin S2 (PyoS2NTD) is imported through the pyoverdine receptor FpvAI. PyoS2NTD transport follows the opening of a proton-motive force-dependent pore through FpvAI and the delivery of its own TonB box that engages TonB. We use molecular models and simulations to formulate a complete translocation pathway for PyoS2NTD that we validate using protein engineering and cytotoxicity measurements. We show that following partial removal of the FpvAI plug domain which occludes the channel, the pyocin's N-terminus enters the channel by electrostatic steering and ratchets to the periplasm. Application of force, mimicking that exerted by TonB, leads to unraveling of PyoS2NTD as it squeezes through the channel. Remarkably, while some parts of PyoS2NTD must unfold, complete unfolding is not required for transport, a result we confirmed by disulfide bond engineering. Moreover, the section of the FpvAI plug that remains embedded in the channel appears to serve as a buttress against which PyoS2NTD is pushed to destabilize the domain. Our study reveals the limits of structural deformation that accompanies import through a TBDT and the role the TBDT itself plays in accommodating transport.
RESUMEN
The direct tailoring of the size, composition, or number of layers belongs to the advantages of 3D printing employment in producing orodispersible films (ODFs) compared to the frequently utilized solvent casting method. This study aimed to produce porous ODFs as a substrate for medicated ink deposited by a 2D printer. The innovative semi-solid extrusion 3D printing method was employed to produce multilayered ODFs, where the bottom layer assures the mechanical properties. In contrast, the top layer provides a porous structure for ink entrapment. Hydroxypropyl methylcellulose and polyvinyl alcohol were utilized as film-forming polymers, glycerol as a plasticizer, and sodium starch glycolate as a disintegrant in the bottom matrix. Several porogen agents (Aeroperl® 300, Fujisil®, Syloid® 244 FP, Syloid® XDP 3050, Neusilin® S2, Neusilin® US2, and Neusilin® UFL2) acted as porosity enhancers in the two types of top layer. ODFs with satisfactory disintegration time were prepared. The correlation between the porogen content and the mechanical properties was proved. A porous ODF structure was detected in most samples and linked to the porogen content. SSE 3D printing represents a promising preparation method for the production of porous ODFs as substrates for subsequent drug deposition by 2D printing, avoiding the difficulties arising in casting or printing medicated ODFs directly.
RESUMEN
Black phosphorus (BP) has been among the most widely explored materials in recent years because of its exceptional properties. A vapor transport method using tin and iodide as mineralizers was used to synthesize large crystals which can be used for fundamental physical characterization including electrical and heat transport and heat capacity. This method is compared to other reported procedures (high-pressure crystal growth and mercury catalysis) which are broadly used and the most dominant procedures for the obtainment of bulk layered BP. In addition, we have investigated any possible impurities which could have been introduced by synthesis and their possible incorporation into BP and their influence on the physical properties of BP.
RESUMEN
As polymeric materials are already used in many industries, the range of their applications is constantly expanding. Therefore, their preparation procedures and the resulting properties require considerable attention. In this work, we designed the surface of polyethylene naphthalate (PEN) introducing copper nanowires. The surface of PEN was transformed into coherent ripple patterns by treatment with a KrF excimer laser. Then, Cu deposition onto nanostructured surfaces by a vacuum evaporation technique was accomplished, giving rise to nanowires. The morphology of the prepared structures was investigated by atomic force microscopy and scanning electron microscopy. Energy dispersive spectroscopy and X-ray photoelectron spectroscopy revealed the distribution of Cu in the nanowires and their gradual oxidation. The optical properties of the Cu nanowires were measured by UV-Vis spectroscopy. The sessile drop method revealed the hydrophobic character of the Cu/PEN surface, which is important for further studies of biological responses. Our study suggests that a combination of laser surface texturing and vacuum evaporation can be an effective and simple method for the preparation of a Cu/polymer nanocomposite with potential exploitation in bioapplications; however, it should be borne in mind that significant post-deposition oxidation of the Cu nanowire occurs, which may open up new strategies for further biological applications.
RESUMEN
The intercalation of cations into layered-structure electrode materials has long been studied in depth for energy storage applications. In particular, Li+ -, Na+ -, and K+ -based cation transport in energy storage devices such as batteries and electrochemical capacitors is closely related to the capacitance behavior. We have exploited different sizes of cations from aqueous salt electrolytes intercalating into a layered Nb2 CTx electrode in a supercapacitor for the first time. As a result, we have demonstrated that capacitive performance was dependent on cation intercalation behavior. The interlayer spacing expansion of the electrode material can be observed in Li2 SO4 , Na2 SO4 , and K2 SO4 electrolytes with d-spacing. Additionally, our results showed that the Nb2 CTx electrode exhibited higher electrochemical performance in the presence of Li2 SO4 than in that of Na2 SO4 and K2 SO4 . This is partly because the smaller-sized Li+ transports quickly and intercalates between the layers of Nb2 CTx easily. Poor ion transport in the Na2 SO4 electrolyte limited the electrode capacitance and presented the lowest electrochemical performance, although the cation radius follows Li+ >Na+ >K+ . Our experimental studies provide direct evidence for the intercalation mechanism of Li+ , Na+ , and K+ on the 2D layered Nb2 CTx electrode, which provides a new path for exploring the relationship between intercalated cations and other MXene electrodes.
RESUMEN
Introducing hierarchical porosity to zeolites is vital for providing molecular access to microporous domains. Yet, the dynamics of meso- and macropore formation has remained elusive and pore space ill-characterized by a lack of (in situ) microscopic tools sensitive to nanoporosity. Here, we probe hierarchical porosity formation within a zeolite ZSM-5 crystal in real-time by in situ fluorescence microscopy during desilication. In addition, we introduce small-angle X-ray scattering microscopy as novel characterization tool to map intracrystal meso- and macropore properties. It is shown that hierarchical porosity formation initiates at the crystal surface and propagates to the crystal core via a pore front with decreasing rate. Also, hierarchical porosity only establishes in specific (segments of) subunits which constitute ZSM-5. Such space-dependent meso- and macroporosity implies local discrepancies in diffusion, performance and deactivation behaviors even within a zeolite crystal.
RESUMEN
Germanium, with a high theoretical capacity based on alloyed lithium and germanium (1384 mA h g-1 Li15Ge4), has stimulated tremendous research as a promising candidate anode material for lithium-ion batteries (LIBs). However, due to the alloying reaction of Li/Ge, the problems of inferior cycle life and massive volume expansion of germanium are equally obvious. Among all Ge-based materials, the unique layered 2D germanane (GeH and GeCH3) with a graphene-like structure, obtained by a chemical etching process from the Zintl phase CaGe2, could enable storage of large quantities of lithium between their interlayers. Besides, the layered structure has the merit of buffering the volume expansion due to the tunable interlayer spacing. In this work, the beyond theoretical capacities of 1637 mA h g-1 for GeH and 2048 mA h g-1 for GeCH3 were achieved in the initial lithiation reaction. Unfortunately, the dreadful capacity fading and electrode fracture happened during the subsequent electrochemical process. A solution, i.e. introducing single-wall carbon nanotubes (SWCNTs) into the structure of the electrodes, was found and further confirmed to improve their electrochemical performance. More noteworthy is the GeH/SWCNT flexible electrode, which exhibits a capacity of 1032.0 mA h g-1 at a high current density of 2000 mA g-1 and a remaining capacity of 653.6 mA h g-1 after 100 cycles at 500 mA g-1. After 100 cycles, the hybrid germanane/SWCNT electrodes maintained good integrity without visible fractures. These results indicate that introducing SWCNTs into germanane effectively improves the electrochemical performance and maintains the integrity of the electrodes for LIBs.
RESUMEN
Three different crystallographic orientations of the wurtzite ZnO structure (labeled as c-plane, a-plane and m-plane) were implanted with Au+ ions using various energies and fluences to form gold nanoparticles (GNPs). The ion implantation process was followed by annealing at 600 °C in an oxygen atmosphere to decrease the number of unwanted defects and improve luminescence properties. With regard to our previous publications, the paper provides a summary of theoretical and experimental results, i.e., both DFT and FLUX simulations, as well as experimental results from TEM, HRTEM, RBS, RBS/C, Raman spectroscopy and photoluminescence. From the results, it follows that in the ZnO structure, implanted gold atoms are located in random interstitial positions -experimentally, the amount of interstitial gold atoms increased with increasing ion implantation fluence. During ion implantation and subsequent annealing, the metal clusters and nanoparticles with sizes from 2 to 20 nm were formed. The crystal structure of the resulting gold was not cubic (confirmed by diffraction patterns), but it had a hexagonal close-packed (hcp) arrangement. The ion implantation of gold leads to the creation of Zn and O interstitial defects and extended defects with distinct character in various crystallographic cuts of ZnO, where significant O-sublattice disordering occurred in m-plane ZnO.
RESUMEN
Layered black phosphorus (BP) is a member of a layered material family with anisotropic properties and layer-dependent band gaps that can be exfoliated down to single-layered phosphorene. Compared with graphene, few-layered BP and its single-layer phosphorene are significantly more reactive, and this reactivity can be applied for the autogenous reduction of gold ions to metallic gold nanoparticles supported by few-layered BP (Au/BP). Few-layered BP and gold are well-known oxidation catalysts important in organic synthesis and also in the catalytic treatment and purification of industrial wastewater. The treatment of organic contamination present in industrial wastewater presents serious problems and is an important issue for current catalysis. Here, we show the high catalytic activity of the gold supported on few-layered black phosphorus (Au/BP) for wet oxidation of acrylic acid, including samples of industrial wastewater with complex composition. The catalyst Au/BP exhibits high stability, which allows utilization of its easily accessible 2D surface for the preparation of 2D material-supported metal catalysts.
RESUMEN
Black phosphorus is currently among the most explored two-dimensional (2D) materials. Currently, the synthesis methods are dominantly based on vapor-phase growth of black phosphorus. In this manuscript, we demonstrate large-scale synthesis of black phosphorus by rapid high-pressure transition of red phosphorus. The high-pressure conversion of red phosphorus led to high-density nanocrystalline black phosphorus ceramics. The resulting material was explored in detail including structural and morphological characterization in addition to thermal and electrical transport and basic thermophysical properties. The nanocrystalline black phosphorus can be employed for large-scale production of stable few/single-layer black phosphorus colloidal solutions in various solvents.
RESUMEN
BACKGROUND: Previous outcome studies in open tibial fractures have commonly assessed young patients and there is a paucity of data regarding outcomes in the elderly. The aim of this study is to assess functional outcomes for patients over 75 years with Gustilo-Anderson Grade III open tibial fractures, including mobility and residential status. METHODS: Outcomes for all patients over 75 years admitted with grade III open tibial fractures to a UK level 1 trauma centre during a 5-year period (January 2010-May 2015) were analysed. Long-term follow up of surviving patients (median 44 months post injury) was undertaken in February 2016. RESULTS: Twenty-nine patients (24 female, 5 male - median 85 years) were included. Prior to injury 48% (nâ¯=â¯14) patients were independently mobile and 45% (nâ¯=â¯13) were living at home without care. Two-thirds of injuries were low energy; all patients sustained a grade III open tibial fracture. The 12-month mortality rate was 28% (nâ¯=â¯8) and mortality at long-term follow-up 48% (nâ¯=â¯14). From pre-injury to long-term 8% (nâ¯=â¯1) patients did not change mobility status, 75% (nâ¯=â¯9) reduced by one grade (e.g. independent to walking aid) and 16% (nâ¯=â¯2) by two grades. Fifty eight percent (nâ¯=â¯7) of patients retained residential status, 17% (nâ¯=â¯2) reduced by one grade and 25% (nâ¯=â¯3) by two grades. CONCLUSION: Grade III open tibial fractures are a significant injury in the elderly associated with poor outcomes with respect to return to mobility and pre-injury residential status. Our results suggest that a greater emphasis on intensive rehabilitation should be considered in this patient group.
RESUMEN
Ni contamination from crude oil in the fluid catalytic cracking (FCC) process is one of the primary sources of catalyst deactivation, thereby promoting dehydrogenation-hydrogenation and speeding up coke growth. Herein, single-particle X-ray fluorescence, diffraction and absorption (µXRF-µXRD-µXAS) tomography is used in combination with confocal fluorescence microscopy (CFM) after thiophene staining to spatially resolve Ni interaction with catalyst components and study zeolite degradation, including the processes of dealumination and Brønsted acid sites distribution changes. The comparison between a Ni-lean particle, exposed to hydrotreated feedstock, and a Ni-rich one, exposed to non-hydrotreated feedstock, reveals a preferential interaction of Ni, found in co-localization with Fe, with the γ-Al2 O3 matrix, leading to the formation of spinel-type hotspots. Although both particles show similar surface zeolite degradation, the Ni-rich particle displays higher dealumination and a clear Brønsted acidity drop.
RESUMEN
The properties of materials at the nanoscale open up new methodologies for engineering prospective materials usable in high-end applications. The preparation of composite materials with a high content of an active component on their surface is one of the current challenges of materials engineering. This concept significantly increases the efficiency of heterogeneous processes moderated by the active component, typically in biological applications, catalysis, or drug delivery. Here we introduce a general approach, based on laser-induced optomechanical processing of silver colloids, for the preparation of polymer surfaces highly enriched with silver nanoparticles (AgNPs). As a result, the AgNPs are firmly immobilized in a thin surface layer without the use of any other chemical mediators. We have shown that our approach is applicable to a broad spectrum of polymer foils, regardless of whether they absorb laser light or not. However, if the laser radiation is absorbed, it is possible to transform smooth surface morphology of the polymer into a roughened one with a higher specific surface area. Analyses of the release of silver from the polymer surface together with antibacterial tests suggested that these materials could be suitable candidates in the fight against nosocomial infections and could inhibit the formation of biofilms with a long-term effect.
Asunto(s)
Antibacterianos/química , Antibacterianos/farmacología , Nanopartículas del Metal/química , Polímeros/química , Plata/química , Electroquímica , Luz , Nanopartículas del Metal/ultraestructura , Pruebas de Sensibilidad Microbiana , Modelos Teóricos , Propiedades de SuperficieRESUMEN
The mechanism of colloidal silica action to improve flow properties of pharmaceutical powders is known to be based on inter-particle force disruption by silica particles adhered to the particle surface. In the present article, the kinetic aspects of this action are investigated, focusing on non-spherical particles of different size. Blends comprising microcrystalline cellulose or calcium hydrogen phosphate dihydrate and colloidal silica were examined using powder rheometer. The blends were formulated to represent effects of particle size, surface texture, colloidal silica loading, and mixing time. Pre-conditioning, shear testing, compressibility, and flow energy measurements were used to monitor flow properties. Components and blends were analyzed using particle size analysis and scanning electron microscopy (SEM), using energy dispersive spectroscopy (EDS) and back-scattered electron (BSE) detection to determine surface particle arrangement. All studied parameters were found to have substantial effects on flow properties of powder blends. Those effects were explained by identifying key steps of colloidal silica action, which were found to proceed at substantially different rates, causing the flow properties change over time being dependent on the blend formulation and the component properties.
Asunto(s)
Fosfatos de Calcio/química , Celulosa/química , Excipientes/química , Dióxido de Silicio/química , Química Farmacéutica/métodos , Coloides/química , Composición de Medicamentos/métodos , Microscopía Electrónica de Rastreo , Tamaño de la Partícula , Polvos , Reología , Espectrometría por Rayos X , Factores de TiempoRESUMEN
Tip-enhanced Raman spectroscopy (TERS) is a powerful tool for non-destructive and label-free surface molecular mapping at the nanoscale. However, to date nanoscale resolution chemical imaging in a liquid environment has not been possible, in part due to the lack of robust TERS probes that are stable when immersed in a liquid. In this work, we have addressed this challenge by developing plasmonically-active TERS probes with a multilayer metal coating structure that can be successfully used within a liquid environment. Using these novel TERS probes, we have compared the plasmonic enhancement of TERS signals in air and water environments for both gap mode and non-gap mode configurations and show that in both cases the plasmonic enhancement decreases in water. To better understand the signal attenuation in water, we have performed numerical simulations that revealed a negative correlation between the electric field enhancement at the TERS probe-apex and the refractive index of the surrounding medium. Finally, using these robust probes we demonstrate TERS imaging with nanoscale spatial resolution in a water environment for the first time by employing single-wall carbon nanotubes as a model sample. Our findings are expected to broaden the scope of TERS to a range of scientific disciplines in which nanostructured solid-liquid interfaces play a key role.
RESUMEN
Polyetheretherketone (PEEK) has good chemical and biomechanical properties that are excellent for biomedical applications. However, PEEK exhibits hydrophobic and other surface characteristics which cause limited cell adhesion. We have investigated the potential of Ar plasma treatment for the formation of a nanostructured PEEK surface in order to enhance cell adhesion. The specific aim of this study was to reveal the effect of the interface of plasma-treated and gold-coated PEEK matrices on adhesion and spreading of mouse embryonic fibroblasts. The surface characteristics (polarity, surface chemistry, and structure) before and after treatment were evaluated by various experimental techniques (gravimetry, goniometry, X-ray photoelectron spectroscopy (XPS), and electrokinetic analysis). Further, atomic force microscopy (AFM) was employed to examine PEEK surface morphology and roughness. The biological response of cells towards nanostructured PEEK was evaluated in terms of cell adhesion, spreading, and proliferation. Detailed cell morphology was evaluated by scanning electron microscopy (SEM). Compared to plasma treatment, gold coating improved PEEK wettability. The XPS method showed a decrease in the carbon concentration with increasing time of plasma treatment. Cell adhesion determined on the interface between plasma-treated and gold-coated PEEK matrices was directly proportional to the thickness of a gold layer on a sample. Our results suggest that plasma treatment in a combination with gold coating could be used in biomedical applications requiring enhanced cell adhesion.
RESUMEN
The layered transition metal dichalcogenides are currently amongst the most intensively investigated materials. These compounds constitute a broad family of materials, with characteristic layered structures, covering both semiconductors and metallic materials. The great attention arises from the possibility to exfoliate these materials down to single layers with many unique properties, such as thickness dependent band-gap energy, and the possibility of tuning transport properties by phase transitions. The research in the field of transition metal dichalcogenides is also motivated by their high electrocatalytic activity towards several industrially important reactions, such as the hydrogen evolution reaction, as well as many other applications in nano- and optoelectronics. Although these materials are studied intensively, their availability is extremely limited and only disulfides of molybdenum and tungsten are broadly commercially available. Here an optimized procedure for simple direct synthesis of transition metal dichalcogenides using powder metals and elemental chalcogens is reported. The optimized thermal treatment allowed the synthesis scaling of the sulfides, selenides and tellurides of 4th, 5th, 6th, and 7th group of layered-structure dichalcogenides. The synthesized transition metal dichalcogenides were single phase. The phase purity, structure, and morphology were investigated in detail by electron microscopy and EDS, X-ray diffraction, and Raman spectroscopy.
RESUMEN
We have investigated the application of Ar plasma for creation of nanostructured ultra high molecular weight polyethylene (PE) surface in order to enhance adhesion of mouse embryonic fibroblasts (L929). The aim of this study was to investigate the effect of the interface between plasma-treated and gold-coated PE on adhesion and spreading of cells. The surface properties of pristine samples and its modified counterparts were studied by different experimental techniques (gravimetry, goniometry and X-ray photoelectron spectroscopy (XPS), electrokinetic analysis), which were used for characterization of treated and sputtered layers, polarity and surface chemical structure, respectively. Further, atomic force microscopy (AFM) was employed to study the surface morphology and roughness. Biological responses of cells seeded on PE samples were evaluated in terms of cell adhesion, spreading, morphology and proliferation. Detailed cell morphology and intercellular connections were followed by scanning electron microscopy (SEM). As it was expected the thickness of a deposited gold film was an increasing function of the sputtering time. Despite the fact that plasma treatment proceeded in inert plasma, oxidized degradation products were formed on the PE surface which would contribute to increased hydrophilicity (wettability) of the plasma treated polymer. The XPS method showed a decrease in carbon concentration with increasing plasma treatment. Cell adhesion measured on the interface between plasma treated and gold coated PE was inversely proportional to the thickness of a gold layer on a sample.
Asunto(s)
Materiales Biocompatibles Revestidos , Oro , Ensayo de Materiales , Gases em Plasma/química , Polietilenos , Animales , Línea Celular , Materiales Biocompatibles Revestidos/química , Materiales Biocompatibles Revestidos/farmacología , Oro/química , Oro/farmacología , Ratones , Polietilenos/química , Polietilenos/farmacología , Propiedades de SuperficieRESUMEN
The aim of this study was to follow the skin penetration of a model lipophilic compound (Nile red) delivered by nanoparticulate carriers, the so-called lipid nanocapsules. The nanocapsules consisting of an oil core stabilized by amixture of surfactants were prepared by the phase inversion temperature method. Varying the particle composition (the oil/surfactant ratio) nanoparticles of different size were prepared and characterized. The penetration profile of Nile red delivered into the porcine skin by the nanoparticles compared to non-particulate samples was determined using fluorescence microscopy combined with a novel, statistically robust quantitative image analysis method. This study demonstrated that lipid nanoparticles promoted the skin penetration of encapsulated Nile red in comparison with all the non-particulate samples. Nile red delivered by the lipid-based nanoparticles was able to diffuse across the stratum corneum and partition itself uniformly in the epidermis. No relationship between Nile red penetration into the skin and the particle size was found. Moreover, the presence of sodium chloride in the water phase had a negative impact on the Nile red penetration into the skin. The results indicate that the physico-chemical circumstances of the nanoparticulate formulation play the major role in the penetration of lipophilic substances into the skin.
Asunto(s)
Portadores de Fármacos/química , Epidermis/efectos de los fármacos , Lípidos/química , Nanopartículas/química , Animales , Sistemas de Liberación de Medicamentos , Procesamiento de Imagen Asistido por Computador , Microscopía Confocal , Microscopía Electrónica de Transmisión , Microscopía Fluorescente , Nanocápsulas/química , Aceites/química , Oxazinas/química , Tamaño de la Partícula , Piel/efectos de los fármacos , Piel/patología , Absorción Cutánea , Programas Informáticos , Tensoactivos/química , PorcinosRESUMEN
The presented report focuses on an in-depth detailed characterization of immobilized methyltrioxorhenium (MTO), giving catalysts with a wide spectra of utilization. The range of mesoporous materials with different SiO2/Al2O3 ratios, namely mesoporous alumina (MA), aluminosilicates type Siral (with Al content 60%-90%) and MCM-41, were used as supports for immobilization of MTO. The tested support materials (aluminous/siliceous) exhibited high surface area, well-defined regular structure and narrow pore size distribution of mesopores, and therefore represent excellent supports for the active components. Some of the supports were modified by zinc chloride in order to obtain catalysts with higher activities for instance in metathesis reactions. The immobilization of MTO was optimized using these supports and it was successful using all supports. The success of the immobilization of MTO and the properties of the prepared heterogeneous catalysts were characterized using X-ray Fluorescence (XRF), atomic absorption spectroscopy (AAS), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), physical adsorption of N2, ultraviolet-visible spectroscopy (UV-Vis), infrared spectroscopy (FTIR), Fourier Transform Infrared Spectroscopy (FTIR) using pyridine as a probe molecule and X-ray photoelectron spectroscopy (XPS). Furthermore, the catalytic activity of the immobilized MTO on the tested supports was demonstrated on metathesis reactions of various substrates.