Spontaneous Chiral Symmetry Breaking and Lane Formation in Ferromagnetic Ferrofluids.

Ferromagnetic ferrofluids are synthetic materials consisting of magnetic nanoplatelets dispersed in an isotropic fluid. Their main characteristics are the formation of stable magnetic domains and the presence of macroscopic magnetization even in the absence of a magnetic field. Here, the authors report on the experimental observation of spontaneous stripe formation in a ferromagnetic ferrofluid in the presence of an oscillating external magnetic field. The striped structure is identified as elongated magnetic domains, which exhibit reorientation upon reversal of the magnetic field. The stripes are oriented perpendicular to the magnetic field and are separated by alternating flow lanes. The velocity profile is measured using a space-time correlation technique that follows the motion of the thermally excited fluctuations in the sample. The highest velocities are found in the depleted regions between individual domains and reach values up to several µm s-1 . The fluid in adjacent lanes moves in the opposite directions despite the applied magnetic field being uniform. The formation of bidirectional flow lanes can be explained by alternating rotation of magnetic nanoparticles in neighboring stripes, which indicates spontaneous breaking of the chiral symmetry in the sample.

Growth of carbon nanofibres on molybdenum carbide nanowires and their self-decoration with noble-metal nanoparticles.

High specific surface area makes carbon nanofibres suitable for catalyst support. Here we report on optimization of carbon nanofibre (CNF) growth on molybdenum carbide nanowires (MoCNW) by direct carburization of Mo 6 S 2 I 8 nanowire bundles. Typical CNFs obtained by this method are several hundreds of nanometres long at a diameter of 10-20 nm. We show that nanofibre growth does not depend on the initial morphology of the nanowires: nanofibres grow on individual bundles of MoCNW, on dense networks of nanowires deposited on silicon substrate, and on free-standing nanowire foils. We find that carbon nanofibres remain firmly attached to the nanowires even if they are modified into Mo 2 C and further into Mo S 2 nanowires. The method thus enables production of a novel hybrid material composed of Mo S 2 nanowires densely covered with carbon nanofibres. We have additionally shown that the obtained CNFs can easily be self-decorated with platinum nanoparticles with diameters of several nanometres directly from water solution at room temperature without reducing agents. Such efficient synthesis and decoration process yield hybrid platinum/CNF/molybdenum-based NW materials, which are a promising material for a wide range of possible future applications, including sensitive sensorics and improved catalysis.

Magnetically driven omnidirectional artificial microswimmers.

We present an experimental realisation of two new artificial microswimmers that swim at low Reynolds number. The swimmers are externally driven with a periodically modulated magnetic field that induces an alternating attractive/repulsive interaction between the swimmer parts. The field sequence also modulates the drag on the swimmer components, making the working cycle non-reciprocal. The resulting net translational displacement leads to velocities of up to 2 micrometers per second. The swimmers can be made omnidirectional, meaning that the same magnetic field sequence can drive swimmers in any direction in the sample plane. Although the direction of their swimming is determined by the momentary orientation of the swimmer, their motion can be guided by solid boundaries. We demonstrate their omnidirectionality by letting them travel through a circular microfluidic channel. We use simple scaling arguments as well as more detailed numerical simulations to explain the measured velocity as a function of the actuation frequency.

Analysis of fluid flow around a beating artificial cilium.

Biological cilia are found on surfaces of some microorganisms and on surfaces of many eukaryotic cells where they interact with the surrounding fluid. The periodic beating of the cilia is asymmetric, resulting in directed swimming of unicellular organisms or in generation of a fluid flow above a ciliated surface in multicellular ones. Following the biological example, externally driven artificial cilia have recently been successfully implemented as micropumps and mixers. However, biomimetic systems are useful not only in microfluidic applications, but can also serve as model systems for the study of fundamental hydrodynamic phenomena in biological samples. To gain insight into the basic principles governing propulsion and fluid pumping on a micron level, we investigated hydrodynamics around one beating artificial cilium. The cilium was composed of superparamagnetic particles and driven along a tilted cone by a varying external magnetic field. Nonmagnetic tracer particles were used for monitoring the fluid flow generated by the cilium. The average flow velocity in the pumping direction was obtained as a function of different parameters, such as the rotation frequency, the asymmetry of the beat pattern, and the cilium length. We also calculated the velocity field around the beating cilium by using the analytical far-field expansion. The measured average flow velocity and the theoretical prediction show an excellent agreement.

Measurement of fluid flow generated by artificial cilia.

We observed and measured the fluid flow that was generated by an artificial cilium. The cilium was composed of superparamagnetic microspheres, in which magnetic dipole moments were induced by an external magnetic field. The interaction between the dipole moments resulted in formation of long chains-cilia, and the same external magnetic field was also used to drive the cilia in a periodic manner. Asymmetric periodic motion of the cilium resulted in generation of fluid flow and net pumping of the surrounding fluid. The flow and pumping performance were closely monitored by introducing small fluorescent tracer particles into the system. By detecting their motion, the fluid flow around an individual cilium was mapped and the flow velocities measured. We confirm that symmetric periodic beating of one cilium results in vortical motion only, whereas asymmetry is required for additional translational motion. We determine the effect of asymmetry on the pumping performance of a cilium, verify the theoretically predicted optimal pumping conditions, and determine the fluid behaviour around a linear array of three neighbouring cilia. In this case, the contributions of neighbouring cilia enhance the maximal flow velocity compared with a single cilium and contribute to a more uniform translational flow above the surface.

Self-assembled artificial cilia.

Due to their small dimensions, microfluidic devices operate in the low Reynolds number regime. In this case, the hydrodynamics is governed by the viscosity rather than inertia and special elements have to be introduced into the system for mixing and pumping of fluids. Here we report on the realization of an effective pumping device that mimics a ciliated surface and imitates its motion to generate fluid flow. The artificial biomimetic cilia are constructed as long chains of spherical superparamagnetic particles, which self-assemble in an external magnetic field. Magnetic field is also used to actuate the cilia in a simple nonreciprocal manner, resulting in a fluid flow. We prove the concept by measuring the velocity of a cilia-pumped fluid as a function of height above the ciliated surface and investigate the influence of the beating asymmetry on the pumping performance. A numerical simulation was carried out that successfully reproduced the experimentally obtained data.

Confinement effect on interparticle potential in nematic colloids.

We studied the confinement effect on the interaction force in nematic liquid crystal colloids with spherical particles inducing planar anchoring. Using magneto-optical tweezers, we measured the spatial dependence of the quadrupolar structural interparticle force over 4 orders of magnitude. For small separations, the interparticle potential follows the power law, whereas for separations larger than the sample thickness, it decreases exponentially with the decay length proportional to the sample thickness. Experimental results are reproduced by using the Landau-de Gennes free-energy minimization approach.

Interparticle potential and drag coefficient in nematic colloids.

Magneto-optic tweezers were used for measurements of liquid-crystal-mediated forces between spherical beads with tangential anchoring in thin nematic samples. Repulsive force, which results from the quadrupolar symmetry of defects around the immersed beads, decreases proportionally to 1/x6, with x being the bead separation. The velocity with which the particles are pushed apart also follows the same separation dependence. We thus find the effective drag coefficient gamma(eff) independent of x for surface-to-surface distances as small as 10% of the bead diameter.

Force-dependent stepping kinetics of myosin-V.

Myosin-V is a processive two-headed actin-based motor protein involved in many intracellular transport processes. A key question for understanding myosin-V function and the communication between its two heads is its behavior under load. Since in vivo myosin-V colocalizes with other much stronger motors like kinesins, its behavior under superstall forces is especially relevant. We used optical tweezers with a long-range force feedback to study myosin-V motion under controlled external forward and backward loads over its full run length. We find the mean step size remains constant at approximately 36 nm over a wide range of forces from 5 pN forward to 1.5 pN backward load. We also find two force-dependent transitions in the chemomechanical cycle. The slower ADP-release is rate limiting at low loads and depends only weakly on force. The faster rate depends more strongly on force. The stronger force dependence suggests this rate represents the diffusive search of the leading head for its binding site. In contrast to kinesin motors, myosin-V's run length is essentially independent of force between 5 pN of forward to 1.5 pN of backward load. At superstall forces of 5 pN, we observe continuous backward stepping of myosin-V, indicating that a force-driven reversal of the power stroke is possible.

Azimuthal and zenithal anchoring of nematic liquid crystals.

Temperature dependence of azimuthal and zenithal anchoring energy coefficients of the nematic liquid crystal 4-n-pentyl-4(')-cyanobiphenyl on rubbed nylon is measured using dynamic light scattering. The method is based on observations of director fluctuations in a planarly aligned wedge cell, where the anchoring energy coefficients can be obtained without any external torques acting on the liquid crystal during the measurement. We found that both anchoring coefficients decrease steadily on approaching the nematic-isotropic transition. Moreover, in the whole temperature range of the nematic phase, the ratio between the zenithal and the azimuthal anchoring coefficients is almost equal to the ratio between the splay and the twist Frank elastic constants. The same result is obtained also for the nematic phase of 4-n-octyl-4(')-cyanobiphenyl. This indicates that the aligning nylon layer directly affects only the monomolecular layer at the surface whereas the observed anchoring is governed by the elastic properties of the alkyl-cyanobiphenyl.

Deuteron NMR study of molecular ordering in a holographic-polymer-dispersed liquid crystal.

Using deuteron nuclear magnetic resonance (NMR) and dynamic light scattering, we study the orientational order and dynamics of a BL038-5CB liquid-crystal mixture in a holographic polymer dispersed liquid-crystal material (HPDLC) as used for switchable diffractive optical elements. At high temperatures, where the liquid crystal is predominantly in the isotropic phase, the HPDLC deuteron NMR linewidth and transverse spin-relaxation rate T-12 are two orders of magnitude larger than in the bulk. The analysis shows that the surface-induced order parameter in HPDLC is significantly larger than in similar confining systems and that translational diffusion of molecules in the surface layer is at least two orders of magnitude slower than in the rest of the cavity. The unusual temperature dependence of T-12 upon cooling suggests the possibility of a partial separation of the 5CB component in the liquid-crystal mixture. The onset of the nematic phase in HPDLC occurs at considerably lower temperature than in the bulk and takes place gradually due to different sizes and different content of non-liquid-crystalline ingredients in droplets. Parts of the droplets are found isotropic even at room temperature and the structure of the nematic director field in the droplets is only slightly anisotropic. We point out the capability of NMR to detect the actual state of liquid-crystalline order in HPDLCs and to contribute in this way to the improvement of the switching efficiency of diffraction gratings.

Dynamic light scattering measurements of azimuthal and zenithal anchoring of nematic liquid crystals.

Dynamic light scattering is used to obtain the anchoring energy coefficients of nematic liquid crystal (4-n-pentyl-4(')-cyanobiphenyl) on rubbed nylon and photoactive poly-(vinyl-cinnamate). The anchoring coefficients are determined by measuring the relaxation time of the fundamental director fluctuation mode in a homogeneously aligned wedge cell as a function of cell thickness. The method is nonperturbative as no external torque is applied to the liquid crystal during the measurement. We show that by using two different scattering geometries, both azimuthal and zenithal anchoring energy coefficients can be measured on the same sample. The obtained zenithal anchoring coefficient is found to be, in contrast to previously reported results, approximately only two times larger than the azimuthal one. The effect of higher order fluctuation modes on the detected autocorrelation function is in good agreement with numerical calculations.