RESUMEN
3D hybrid nanostructures connecting 1D carbon nanotubes (CNTs) with 2D graphene have attracted more and more attentions due to their excellent chemical, physical and electrical properties. In this study, we firstly report a novel and facile one-step process using template-directed chemical vapor deposition (CVD) to fabricate highly nitrogen doped three-dimensional (3D) N-doped carbon nanotubes/N-doped graphene architecture (N-CNTs/N-graphene). We used nickel foam as substrate, melamine as a single source for both carbon and nitrogen, respectively. The morphology and microstructure were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, isothermal analyses, X-ray photoelectron microscopy and Raman spectra. The obtained 3D N-CNTs/N-graphene exhibits high graphitization, a regular 3D structure and excellent nitrogen doping and good mesoporosity.
RESUMEN
Integration of two-dimensional graphene and one-dimensional carbon nanotubes (CNTs) to create potentially useful 3D mesoscopic carbon structures with enhanced properties relative to the original materials is very desirable. Here, we report a novel and simple route using chemical vapor deposition (CVD) methods to fabricate bead-like nitrogen-doped CNT/graphene composites (NCNT/G) via a simple pyrolysis of the N-rich melamine in the presence of graphene oxide (GO) as a substrate using a Mn-Ni-Co ternary catalyst. We have characterized these structures by field-emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Raman spectra, isothermal analyses, and X-ray photoelectron spectroscopy. The three dimensional NCNT/G hybrids have unique network structures, moderate graphitization, high specific surface area, good mesoporosity, and N doping, which makes them promising materials for applications in energy storage and conversion.
RESUMEN
A simple approach to monitor the H(+) activity of a proton-exchange membrane (Nafion) is introduced by incorporating methylene blue as an indicator dye. The dye exhibits characteristics absorption maxima at 665 and 745 nm corresponding to its singly and doubly protonated forms, respectively. The apparent proton activity of Nafion as monitored from the appearance of doubly protonated methylene blue absorption is equivalent to 1.2 M H2SO4. By monitoring the spectral changes associated with the protonation equilibrium of the dye, it is possible to probe the rate and the exchangeable proton sites within the Nafion film. For the Nafion 117 film, we estimate the total exchangeable proton sites to be 2.5 x 10(19) sites/cm(2) or 4.2 x 10(-5) mols/cm(2). The equilibrium constant for the H(+)/Na(+) exchange for the bound sites is determined to be 2.2. The feasibility of methylene blue as a probe to monitor proton activity during the operation of a direct methanol fuel cell has been explored.
RESUMEN
Well-dispersed Pt catalysts with very high utilization efficiencies for fuel cell reactions have been prepared by ethylene glycol reduction on polymer-wrapped single-walled carbon nanotubes (SWCNTs). By wrapping the SWCNTs in a polymer such as polystyrene sulfonate, we are able to break up the nanotube bundles to achieve better dispersion. These polymer-wrapped SWCNTs with platinum nanoparticles deposited on them show very high electrochemically active surface areas. The increase in utilization efficiencies for platinum catalysts on these SWCNT supports can be attributed to the increased surface areas and the well-dispersed nature of the carbon support and catalyst. The catalyst dispersion facilitates diffusion of reactant species which in turn results in higher methanol oxidation currents and more positive potentials for oxygen reduction.
RESUMEN
Colloidal bimetallic nanoparticles of Pt-Ru have been synthesized by sonochemical reduction of Pt(II) and Ru(III) in aqueous solutions. Transmission electron microscope (TEM) images indicate that sequential reduction of the Pt(II) followed by the Ru(III) produces particles with a core shell (Pt@Ru) morphology. In the presence of sodium dodecyl sulfate, SDS, as a stabilizer, the particles have diameters between 5 and 10 nm. When polyvinyl-2-pyrrolidone, PVP, is used as the stabilizer, the rate of reduction is much faster, giving ultrasmall bimetallic particles of approximately 5 nm diameter.
RESUMEN
Single-wall and multiwall carbon nanotubes are employed as carbon supports in direct methanol fuel cells (DMFC). The morphology and electrochemical activity of single-wall and multiwall carbon nanotubes obtained from different sources have been examined to probe the influence of carbon support on the overall performance of DMFC. The improved activity of the Pt-Ru catalyst dispersed on carbon nanotubes toward methanol oxidation is reflected as a shift in the onset potential and a lower charge transfer resistance at the electrode/electrolyte interface. The evaluation of carbon supports in a passive air breathing DMFC indicates that the observed power density depends on the nature and source of carbon nanostructures. The intrinsic property of the nanotubes, dispersion of the electrocatalyst and the electrochemically active surface area collectively influence the performance of the membrane electrode assembly (MEA). As compared to the commercial carbon black support, single wall carbon nanotubes when employed as the support for anchoring the electrocatalyst particles in the anode and cathode sides of MEA exhibited a approximately 30% enhancement in the power density of a single stack DMFC operating at 70 degrees C.
Asunto(s)
Metanol/química , Nanotubos de Carbono/química , Suministros de Energía Eléctrica , Electroquímica , Electrodos , Oxidación-Reducción , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
A membrane electrode assembly (MEA) for hydrogen fuel cells has been fabricated using single-walled carbon nanotubes (SWCNTs) support and platinum catalyst. Films of SWCNTs and commercial platinum (Pt) black were sequentially cast on a carbon fiber electrode (CFE) using a simple electrophoretic deposition procedure. Scanning electron microscopy and Raman spectroscopy showed that the nanotubes and the platinum retained their nanostructure morphology on the carbon fiber surface. Electrochemical impedance spectroscopy (EIS) revealed that the carbon nanotube-based electrodes exhibited an order of magnitude lower charge-transfer reaction resistance (R(ct)) for the hydrogen evolution reaction (HER) than did the commercial carbon black (CB)-based electrodes. The proton exchange membrane (PEM) assembly fabricated using the CFE/SWCNT/Pt electrodes was evaluated using a fuel cell testing unit operating with H(2) and O(2) as input fuels at 25 and 60 degrees C. The maximum power density obtained using CFE/SWCNT/Pt electrodes as both the anode and the cathode was approximately 20% better than that using the CFE/CB/Pt electrodes.
Asunto(s)
Hidrógeno/química , Nanotubos de Carbono/química , Electroquímica , Electrodos , Microscopía Electrónica de Rastreo , Oxígeno/química , Espectrometría RamanRESUMEN
A hybrid carbon fiber electrode (CFE) consisting of TiO2 semiconductor photocatalyst and Pt-Ru catalyst has been developed to boost the performance of direct methanol fuel cells (DMFC). These two catalyst nanoparticles are deposited on opposite sides of the carbon fiber paper such that methanol oxidation is carried out catalytically on Pt-Ru and photocatalytically on TiO2 under UV-light irradiation. Since both catalysts carry out methanol oxidation independently, we observe an additive effect in the current generation. The carbon support fibers provide a large network to collect the electrons from both of these catalytic processes and thus assist in efficient current generation. In addition, TiO2 improves the performance of the Pt-Ru catalyst in dark, indicating possible surface area improvement or diminished poisoning effects. The concept of incorporating a photocatalyst provides new ways to minimize precious metal content and enhance the performance of DMFCs. At low catalyst loadings (0.15 mg/cm2) at 295 K, a 25% enhancement in the peak power density is observed upon illumination with light.
RESUMEN
A one-step process of solubilization of single wall carbon nanotubes (SWCNT) in an organic solvent has enabled us to polarize them asymmetrically in a dc electric field. Quaternary ammonium ion-capped SWCNTs readily suspend in organic solvents; under the influence of a dc electric field, they assemble as stretched bundles anchored on the positive electrode. At low dc applied field (approximately 40 V), all of the SWCNTs from the suspension are deposited on the electrode, thus providing a simple methodology to design robust SWCNT films. At higher applied voltages (>100 V), the SWCNT bundles stretch out into the solution and orient themselves perpendicular to the electrode surface. The alignment of these bundles is responsive to the ON-OFF cycles of the applied electric field. The possibility of modulating the alignment of SWCNT in an electric field opens new ways to achieve electrical contacts in nano- to micro-devices.
RESUMEN
An electroanalytical method has been developed to investigate the uptake of redox-active species by the humic acid substances. The Suwannee River humic acid (SHA) films were first cast on a glassy carbon electrode using an electrophoretic approach. The binding of a series of redox-active species to these SHA films was then probed using cyclic voltammetry at a rotating disk electrode. Neutral molecules such as hydroquinone and cationic species such as methyl viologen are able to bind with the humic membrane and exhibit high redox activity within the film. On the other hand, anionic species such as ferrocyanide are unable to attach themselves to the SHA films and thus exhibit negligible electrochemical activity. Cyclic voltammetric study of SHA films has also facilitated the determination of the partitioning constants and identification of the effect of coadsorbed ions (Ca2+) on the binding of redox species. The electroanalytical method described in this study opens up new avenues to examine the interactions and transport of charged species in a humic acid environment.
Asunto(s)
Monitoreo del Ambiente/métodos , Sustancias Húmicas/análisis , Electroquímica , Iones , Oxidación-ReducciónRESUMEN
Polydisperse humic acid thin films on optically transparent electrodes (OTEs) have been prepared by electrophoretic deposition from a solution of Suwanee River humic acid (SHA) in ethanol/acetonitrile. The thickness of the film and the rate of deposition of SHA are dependent on the applied voltage and the concentration of the solution. Tapping-mode atomic force microscopy (TM-AFM) confirms the assembly of SHA aggregates on the electrode surface. The ability of these thin films to incorporate redox-active species such as ferrocene from solution is demonstrated by cyclic voltammetry experiments. A linear dependence of the peak current for the oxidation of ferrocene as a function of scan rate indicates that the ferrocene is incorporated into the humic membrane.